近期论文
查看导师新发文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
[1] Zhuang Y, Liu D, Chen X, Ma J, Xiong J, Liang C. Statistic model for predicting cluster movement in circulating fluidized bed (CFB) risers. Journal of the Taiwan Institute of Chemical Engineers, 2018, 91: 200-212
[2] Wu Y, Liu D, Duan L, Ma J, Xiong J, Chen X. Three-dimensional CFD simulation of oxy-fuel combustion in a circulating fluidized bed with warm flue gas recycle. Fuel, 2018, 216: 596-611
[3] Song J, Liu D, Ma J, Chen X. Effect of elevated pressure on bubble properties in a two-dimensional gas–solid fluidized bed. Chemical Engineering Research and Design, 2018, 138: 21-31
[4] Liu D, Wang Z, Chen X, Liu M. Simulation of agglomerate breakage and restructuring in shear flows: Coupled effects of shear gradient, surface energy and initial structure. Powder Technology, 2018, 336: 102-111
[5] 刘道银, 王远保, 王铮, 陈晓平. 超细颗粒聚团流化的临界流化速度. 化工学报, 2017, 68: 4105-4111
[6] 刘道银, 宋诚骁, 王铮, 马吉亮, 陈晓平. 埋管流化床内湿颗粒流动及混合特性的CFD-DEM数值模拟. 化工进展, 2017, 36: 2070-2077
[7] Wu Y, Liu D, Ma J, Chen X. Three-Dimensional Eulerian-Eulerian Simulation of Coal Combustion under Air Atmosphere in a Circulating Fluidized Bed Combustor. Energy & Fuels, 2017, 31 (8): 7952-7966
[8] Song C, Liu D, Ma J, Chen X. CFD-DEM simulation of flow pattern and particle velocity in a fluidized bed with wet particles. Powder Technology, 2017, 314: 346-354
[9] Ma J, Liu D, Chen X. Bubbling behavior of cohesive particles in a two-dimensional fluidized bed with immersed tubes. Particuology, 2017, 31 (Supplement C): 152-160
[10] Bu C, Gómez-Barea A, Leckner B, Chen X, Pallarès D, Liu D, Lu P. Oxy-fuel conversion of sub-bituminous coal particles in fluidized bed and pulverized combustors. Proceedings of the Combustion Institute, 2017, 36 (3): 3331-3339
[11] Zhuang Y, Chen X, Liu D. Stochastic bubble developing model combined with Markov process of particles for bubbling fluidized beds. Chemical Engineering Journal, 2016, 291: 206-214
[12] Tang Z, Chen XP, Liu DY, Zhuang YM, Ye MH, Sheng HC, Xu SJ. Experimental investigation of ash deposits on convection heating surfaces of a circulating fluidized bed municipal solid waste incinerator. Journal of Environmental Sciences, 2016, 48: 169-178
[13] Ma JL, Liu DY, Chen XP. Theoretical Model for Normal Impact between Dry Sphere and Liquid Layer with Considerable Thickness. Aerosol and Air Quality Research, 2016, 16 (7): 1533-1540
[14] Ma J, Liu D, Chen X. Normal and oblique impacts between smooth spheres and liquid layers: Liquid bridge and restitution coefficient. Powder Technology, 2016, 301: 747-759
[15] Ma J, Liu D, Chen X. Bubble Behaviors of Large Cohesive Particles in a 2D Fluidized Bed. Industrial & Engineering Chemistry Research, 2016, 55 (3): 624-634
[16] Liu D, Zhang Z, Zhuang Y, Chen X. Comparison of CFD Simulation and Simplified Modeling of a Fluidized Bed CO2 Capture Reactor. International Journal of Chemical Reactor Engineering, 2016, 14 (1): 133-141
[17] Liu D, van Wachem BGM, Mudde RF, Chen X, van Ommen JR. Characterization of fluidized nanoparticle agglomerates by using adhesive CFD-DEM simulation. Powder Technology, 2016, 304: 198-207
[18] Liu D, van Wachem BGM, Mudde RF, Chen X, van Ommen JR. An adhesive CFD-DEM model for simulating nanoparticle agglomerate fluidization. AIChE Journal, 2016, 62 (7): 2259-2270
[19] Liu D, Chen X. Solid Circulation Rate in a Continuous CO2 Absorption Fluidized Bed Reactor. Journal of Chemical Engineering of Japan, 2016, 49 (9): 831-835
[20] Bu C, Pallarès D, Chen X, Gómez-Barea A, Liu D, Leckner B, Lu P. Oxy-fuel combustion of a single fuel particle in a fluidized bed: Char combustion characteristics, an experimental study. Chemical Engineering Journal, 2016, 287: 649-656
[21] Bu C, Gómez-Barea A, Chen X, Leckner B, Liu D, Pallarès D, Lu P. Effect of CO2 on oxy-fuel combustion of coal-char particles in a fluidized bed: Modeling and comparison with the conventional mode of combustion. Applied Energy, 2016, 177: 247-259
[22] Ma J, Liu D, Chen X. Rotational behavior of dry spheres obliquely impacting on liquid layers. Powder Technology, 2015, 270: 418-423
[23] Bu C, Leckner B, Chen X, Pallarès D, Liu D, Gómez-Barea A. Devolatilization of a single fuel particle in a fluidized bed under oxy-combustion conditions. Part A: Experimental results. Combustion and Flame, 2015, 162 (3): 797-808
[24] Bu C, Leckner B, Chen X, Gómez-Barea A, Liu D, Pallarès D. Devolatilization of a single fuel particle in a fluidized bed under oxy-combustion conditions. Part B: Modeling and comparison with measurements. Combustion and Flame, 2015, 162 (3): 809-818
[25] Zhang ZL, Liu DY, Zhuang YM, Meng QM, Chen XP. CFD-DEM Modeling of CO2 Capture using Alkali Metal-Based Sorbents in a Bubbling Fluidized Bed. International Journal of Chemical Reactor Engineering, 2014, 12 (1): 441-449
[26] Ma JL, Liu DY, Chen ZD, Chen XP. Agglomeration characteristics during fluidized bed combustion of salty wastewater. Powder Technology, 2014, 253: 537-547
[27] Bu CS, Liu DY, Chen XP, Pallares D, Gomez-Barea A. Ignition behavior of single coal particle in a fluidized bed under O-2/CO2 and O-2/N-2 atmospheres: A combination of visual image and particle temperature. Applied Energy, 2014, 115: 301-308
[28] Zhou W, Zhao C, Duan L, Chen X, Liu D. A simulation study of coal combustion under O2/CO2 and O2/RFG atmospheres in circulating fluidized bed. Chemical Engineering Journal, 2013, 223: 816-823
[29] Ma JL, Liu DY, Chen XP. Experimental study of oblique impact between dry spheres and liquid layers. Physical Review E, 2013, 88 (3): 033018
[30] Ma JL, Chen XP, Liu DY. Minimum fluidization velocity of particles with wide size distribution at high temperatures. Powder Technology, 2013, 235: 271-278
[31] Liu DY, Bu CS, Chen XP. Development and test of CFD-DEM model for complex geometry: A coupling algorithm for Fluent and DEM. Computers & Chemical Engineering, 2013, 58: 260-268
[32] Bu CS, Liu DY, Chen XP, Liang C, Duan YF, Duan LB. Modeling and Coupling Particle Scale Heat Transfer with DEM through Heat Transfer Mechanisms. Numerical Heat Transfer Part a-Applications, 2013, 64 (1): 56-71
[33] Liu DY, Xiao SQ, Chen XP, Bu CS. Investigation of solid mixing mechanisms in a bubbling fluidized bed using a DEMuCFD approach. Asia-Pacific Journal of Chemical Engineering, 2012, 7: S237-S244
[34] Liu DY, Chen XP. Quantifying lateral solids mixing in a fluidized bed by modeling the thermal tracing method. AIChE Journal, 2012, 58 (3): 745-755
[35] Duan LB, Liu DY, Chen XP, Zhao CS. Fly ash recirculation by bottom feeding on a circulating fluidized bed boiler co-burning coal sludge and coal. Applied Energy, 2012, 95: 295-299
[36] Zhou W, Zhao C, Duan L, Liu D, Chen X. CFD modeling of oxy-coal combustion in circulating fluidized bed. International Journal of Greenhouse Gas Control, 2011, 5 (6): 1489-1497
[37] Liu DY, Chen XP, Zhou W, Zhao CS. Simulation of char and propane combustion in a fluidized bed by extending DEM-CFD approach. Proceedings of the Combustion Institute, 2011, 33: 2701-2708
[38] Liu DY, Chen XP. Experimental Profiles of Lateral Mixing of Feed Particles in a Three-Dimensional Fluidized Bed. AIChE Journal, 2011, 57 (6): 1459-1469
[39] Liu DY, Chen XP. Lateral solids dispersion coefficient in large-scale fluidized beds. Combustion and Flame, 2010, 157 (11): 2116-2124