当前位置: X-MOL首页全球导师 海外导师 › Hambleton, James

个人简介

I am an Early Career Researcher, having received my PhD in Civil Engineering in June 2010 from the University of Minnesota. My involvement in research started at an early age with an appointment as an Undergraduate Research Assistant in the Department of Mechanical Engineering at the University of Minnesota. In 2005, I completed an internship at Barr Engineering Company in Minneapolis. Since completing my postgraduate studies, I have been employed continuously in a position at the University of Newcastle. I first joined the Priority Research Centre for Geo technical and Materials Modelling in July 2010 as a Research Associate (Level B) and then became a Research Academic (Level C) within the ARC Centre of Excellence for Geo technical Science and Engineering (www.cgse.edu.au) at its inception.

研究领域

Civil Engineering

My general areas of interest are in computational plasticity, contact mechanics, geo technical analysis, and analysis of problems involving steady, pseudo-steady, and unsteady plastic flow. My expertise is in modelling problems in geo- and solid mechanics that are characterized by continuous failure and displacement of material via contact with a rigid or flexible object. Specific areas of interest include (1) ploughing and cutting of soils in earth moving operations, (2) installation effects for screw anchors and screw foundations, (3) penetration-based testing for in situ characterization of soil strength and deformability, and (4) soil-wheel interaction for off-road vehicles.

近期论文

查看导师新发文章 (温馨提示:请注意重名现象,建议点开原文通过作者单位确认)

2016 Stanier S, Dijkstra J, Lesniewska D, Hambleton J, White D, Muir Wood D, 'Vermiculate artefacts in image analysis of granular materials', Computers and Geotechnics, 72 100-113 (2016) 2016 Hambleton JP, Sloan SW, 'A simplified kinematic method for 3D limit analysis', Applied Mechanics and Materials, 846 342-347 (2016) 2016 Suchowerska Iwanec AM, Carter JP, Hambleton JP, 'Geomechanics of subsidence above single and multi-seam coal mining', Journal of Rock Mechanics and Geotechnical Engineering, 8 304-313 (2016) 2015 Yu SB, Hambleton JP, Sloan SW, 'Undrained uplift capacity of deeply embedded strip anchors in non-uniform soil', Computers and Geotechnics, 70 41-49 (2015) [C1] 2014 Hambleton JP, Stanier SA, Gaudin C, Todeshkejoei K, 'Analysis of installation forces for helical piles in clay', Australian Geomechanics, 49 73-79 (2014) [C1] 2014 Gaudin C, O'Loughlin CD, Randolph MF, Cassidy MJ, Wang D, Tian Y, et al., 'Advances in offshore and onshore anchoring solutions', Australian Geomechanics, 49 59-71 (2014) [C1] 2014 Hambleton JP, Kouretzis GP, Sloan SW, 'Introduction to the CGSE Special Issue of Australian Geomechanics', Australian Geomechanics, 49 1-2 (2014) [C3] 2014 Yu SB, Hambleton JP, Sloan SW, 'Analysis of Inclined Strip Anchors in Sand Based on the Block Set Mechanism', Applied Mechanics and Materials, 553 422-427 (2014) [C1] 2014 Hambleton JP, Stanier SA, White DJ, Sloan SW, 'Modelling ploughing and cutting processes in soils', Australian Geomechanics Journal, 49 147-156 (2014) [C1] 2013 Hambleton JP, Sloan SW, 'A perturbation method for optimization of rigid block mechanisms in the kinematic method of limit analysis', Computers and Geotechnics, 48 260-271 (2013) [C1] 2013 Hambleton JP, Buzzi O, Giacomini A, Spadari M, Sloan SW, 'Perforation of Flexible Rockfall Barriers by Normal Block Impact', ROCK MECHANICS AND ROCK ENGINEERING, 46 515-526 (2013) [C1] 2012 Hambleton JP, Drescher A, 'Approximate model for blunt objects indenting cohesive-frictional materials', INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS, 36 249-271 (2012) [C1] 2012 Spadari M, Giacomini A, Buzzi OP, Hambleton JP, 'Prediction of the bullet effect for rockfall barriers: A scaling approach', Rock Mechanics and Rock Engineering, 45 131-144 (2012) [C1] 2011 Abbo AJ, Lyamin AV, Sloan SW, Hambleton JP, 'A C2 continuous approximation to the Mohr-Coulomb yield surface', International Journal of Solids and Structures, 48 3001-3010 (2011) [C1] 2009 Hambleton JP, Drescher A, 'On modeling a rolling wheel in the presence of plastic deformation as a three- or two-dimensional process', International Journal of Mechanical Sciences, 51 846-855 (2009) [C1] 2009 Hambleton JP, Drescher A, 'Modeling wheel-induced rutting in soils: Rolling', Journal of Terramechanics, 46 35-47 (2009) [C1] 2008 Hambleton JP, Drescher A, 'Modeling wheel-induced rutting in soils: Indentation', Journal of Terramechanics, 45 201-211 (2008) [C1] 2007 Hambleton JP, Drescher A, 'Modeling test rolling on cohesive subgrades', ADVANCED CHARACTERISATION OF PAVEMENT SOIL ENGINEERING MATERIALS, VOLS 1 AND 2, 359-368 (2007)

推荐链接
down
wechat
bug