个人简介
最高學歷
♦ 國立清華大學工業工程博士
Jun-Ming Lu received his B.S. (2003) and Ph.D. (2009) degrees in Industrial Engineering from National Tsing Hua University, Taiwan. He has been an Invited Researcher in Paris Descartes University, France (2007-2008), a Postdoctoral Research Fellow in Yuan Ze University, Taiwan (2010-2011), an Invited Research Scientist in National Institute of Advanced Industrial Science and Technology, Japan (2011-2012), and a Research Assistant Professor in Yuan Ze University, Taiwan (2012-2014). Currently, he serves as a Contract Assistant Professor in the Department of Industrial Engineering and Engineering Management at National Tsing Hua University, Taiwan. His research interests include Ergonomics, Digital Human Modeling, and Human-Machine System.
近三年執行計畫
盧俊銘
Jun-Ming Lu
降低行走時使用智慧型手機之風險危害的人因工程改善對策
Ergonomic Interventions to reduce the risks associated with smartphone use while walking
科技部
Ministry of Science and Technology
2017.8 - 2018.7
盧俊銘
Jun-Ming Lu
人因工程危害防止計畫
Prevention of ergonomic-related hazards
瑞鼎科技
股份有限公司
Raydium Semiconductor Corporation
2015.10 - 2016.01
盧俊銘
Jun-Ming Lu
基於個人差異、環境因素與任務複雜度的足部定位動作策略分析研究
The study of foot positioning strategies based on individual differences, environmental factors and task complexity
科技部
Ministry of Science and Technology
2015.08 - 2017.07
盧俊銘
Jun-Ming Lu
個人、策略與環境因素對於足部定位績效影響之研究
The study of individual, strategic and environmental effects on foot positioning performance
科技部
Ministry of Science and Technology
2014.11 - 2015.10
近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
A. 期刊論文
1.Jun-Ming Lu, Mitsunori Tada, Yui Endo, and Masaaki Mochimaru (2016) Ingress and egress motion strategies of elderly and young passengers for the rear seat of minivans with sliding doors. Applied Ergonomics, 53A: 228-240. [SCI, EI]
2.Jun-Ming Lu, Li-Jen Twu, Mao-Jiun J. Wang (2016) Risk assessments of work-related musculoskeletal disorders among the TFT-LCD manu-facturing operators. International Journal of Industrial Ergonomics, 52: 40-51. [SCI, EI]
3.Jun-Ming Lu and Yeh-Liang Hsu (2015) The use of psychophysio-logical methods in the evaluation of mental commitment robots for elderly care. Journal of Industrial and Production Engineering, 32(7): 449-456. [EI]
4.Yi-Shin Chen, Yeh-Liang Hsu, and Jun-Ming Lu (2013) TRiCmini+ - A Telepresence Robot for Interpersonal Communication for Older Adults, Journal of the Chinese Society of Mechanical Engineers, 34(2): 121-127. [SCI, EI]
5.Po-Er Hsu, Yeh-Liang Hsu, Jun-Ming Lu, and Cheng-Hao Chang (2013) Seat Adjustment Design of an Intelligent Robotic Wheelchair Based on the Stewart Platform, International Journal of Advanced Robotic Systems, 10(168). [SCI, EI]
6.Che-Chang Yang, Yeh-Liang Hsu, Kao-Shang Shih, and Jun-Ming Lu (2011) Real-Time gait cycle parameters recognition using a wearable accelerometry system, Sensors, 11(8): 7314-7326. [SCI, EI]
7.Jun-Ming Lu and Mao-Jiun J. Wang (2010) The evaluation of scan-derived anthropometric measurements, IEEE Transactions on Instrumentation and Measurement, 59(8): 2048-2054. [SCI, EI]
8.Jun-Ming Lu, Mao-Jiun J. Wang, and Régis Mollard (2010) The effect of arm posture on the scan-derived measurements, Applied Ergonomics, 41(2): 236-241. [SCI, EI]
9.Jun-Ming Lu, Mao-Jiun J. Wang, Chien-Wen Chen, and Jyi-Hua Wu (2010) The development of an intelligent system for customized clothing making, Expert Systems With Applications, 37(1): 799-803. [SCI, EI]
10.Jun-Ming Lu and Mao-Jiun J. Wang (2008) Automated anthropometric data collection using 3D whole body scanners, Expert Systems with Applications, 35(1-2): 407-414. [SCI, EI]
11.Mao-Jiun J. Wang, Wen-Yen Wu, Kuo-Chao Lin, Shi-Nine Yang, and Jun-Ming Lu (2007) Automated anthropometric data collection from three-dimensional digital human models, International Journal of Advanced Manufacturing Technology, 32(1-2): 109-115. [SCI, EI]
研討會論文
1.Jun-Ming Lu (2016). The effects of environmental factors and task complexity on the strategies of foot-eye coordination for foot positioning performed by older adults. The 31st International Congress of Psychology (ICP 2016), Yokohama, Japan.
2.Jun-Ming Lu(2015). Individual, strategic and environmental effects on foot positioning performance. The 19th World Congress on Ergonomics (IEA 2015), Melbourne, Australia.
3.Jun-Ming Lu and Yeh-Liang Hsu (2014) Exploring user expectations towards mental commitment robots for elderly care, 2014 Asia Design Engineering Workshop (A-DEWS 2014), Taipei, Taiwan.
4.Jun-Ming Lu and Yeh-Liang Hsu (2014) The role of the university for transdisciplinary human resource development for the Gerontechnology industry: A case study in Taiwan, The 9th World Conference of Gerontechnology (ISG 2014), Taipei, Taiwan.
5.Jun-Ming Lu (2014) Is there a Gerontechnology industry? Perspectives from Taiwan, The 9th World Conference of Gerontechnology (ISG 2014), Taipei, Taiwan.
6.Jun-Ming Lu and Yeh-Liang Hsu (2013) Use of Telepresence Robots to Facilitate Aging-in-Place, The 20th IAGG World Congress of Gerontology and Geriatrics (IAGG 2013), Seoul, Korea.
7.Jun-Ming Lu, Mitsunori Tada, Yui Endo, and Masaaki Mochimaru (2013) Ingress/egress motion strategies of the elderly people for the rear seat of minivans with sliding doors, The 2nd International Digital Human Modeling Symposium (DHM 2013), Ann Arbor, MI, United States.
8.Yi-Shin Chen, Jun-Ming Lu, and Yeh-Liang Hsu (2013) Design and Evaluation of a Telepresence Robot for Interpersonal Communication with Older Adults, The 11th International Conference on Smart Homes and Health Telematics (ICOST 2013), Singapore.
9.Yi-Shin Chen, Yeh-Liang Hsu, and Jun-Ming Lu (2012) Telepresence Robot for Interpersonal Communication for Older Adults, The 43rd International Symposium on Robotics (ISR 2012), Taipei, Taiwan.
10.Jun-Ming Lu, Yeh-Liang Hsu, Chia-Hung Lu, Po-Er Hsu, Yen-Wei Chen, and Ju-An Wang (2011) Development of a telepresence robot to rebuild the physical face-to-face interaction in remote interpersonal communication, The 2011 International Design Alliance (IDA) Congress Education Conference, Taipei, Taiwan.
11.Jun-Ming Lu and Mao-Jiun J. Wang (2011) A Computer-aided Production System for Mass Customization in Fashion, 10th International Conference on Perspectives in Business Informatics Research, Riga, Latvia.
12.Jun-Ming Lu, Chia-Hung Lu, Ju-An Wang, and Yeh-Liang Hsu (2011) TRiCmini: A Telepresence Robot towards Enriched Quality of Life of the Elderly, The 1st Asia Pacific eCare and TeleCare Congress, Hong Kong.
13.Yu-Wei Liu, Yeh-Liang Hsu, Jun-Ming Lu, and Ke-Yuan Wu (2011) Development of a Care Management System for Nursing Homes based on SmartPad, The 1st Asia Pacific eCare and TeleCare Congress, Hong Kong.
Yeh-Liang Hsu, Jun-Ming Lu, Po-Er Hsu, Jerry, J.-H. Tsai, and Yi-Shin Chen (2011) iRW: An Intelligent Robotic Wheelchair Integrated with Advanced Robotic and Telehealth Solutions, The 1st Asia Pacific eCare and TeleCare Congress, Hong Kong.
15.Che-Chang Yang, Yeh-Liang Hsu, Kao-Shang Shih, Jun-Ming Lu, and Lung Chan (2011) Real-time gait cycle parameters recognition using a wearable motion detector, The 2011 International Conference on System Science and Engineering, Macau.
16.Jun-Ming Lu, Mao-Jiun J. Wang, Régis Mollard, Pierre-Yves Hennion, and Chih-Long Lin (2009) Body shape analysis using 3D scanning data, The 17th World Congress on Ergonomics, Beijing, China.
17.Jun-Ming Lu and Mao-Jiun J. Wang (2008) An intelligent system for customized clothing making, The 7th WSEAS International Conference on Computational Intelligence, Man-machine Systems and Cybernetics, Cairo, Egypt.
18.Jun-Ming Lu and Mao-Jiun J. Wang (2006) Automatic landmarking from 3D human body scanning data, The 16th World Congress on Ergonomics, Maastricht, the Netherlands.
京公网安备 11010802027423号