近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
SCI期刊論文
1.Hocheng*, H., Tsai, H. Y., Shiue, J. J. and Wang, B., “Feasibility Study of Abrasive-Waterjet Milling of Fiber-Reinforced Plastics,” ASME Journal of Manufacturing Science and Engineering, Vol. 119, No. 2, pp. 133-142,1997
2.Hocheng*, H., Tsai, H. Y. and Tsai, M. S., “Effects of Kinematic Variables on Nonuniformity In Chemical Mechanical Planarization,” International Journal of Machine Tools & Manufacture, Vol. 40, pp. 1651-1669, 2000
3.Hocheng*, H., Tsai, H. Y., and Su, Y. T., “Modeling and Experimental Analysis of the Material Removal Rate in the Chemical Mechanical Planarization of Dielectric Films and Bare Silicon Wafers,” Journal of the Electrochemical Society, Vol. 148, pp. G581-G586, 2001
4.Cheng, C. Y., Tsai*, H. Y., Wu, C. H., Liu, P. Y., Hsieh, C. H., Chang, Y. Y., “An oxidation enhanced mechanical polishing technique for CVD diamond films,” Diamond and Related Materials, Vol. 14, pp. 622-625, 2005
5.Chen, C. Y., Tsai, H. Y., and Lin, H. Y., “Optical Disk Groove Mastering Using an Electron Beam Recorder and Chemically Amplified Resist,” IEEE Trans. On Magnetics, Vol. 41, No. 2, pp. 1025-1027,2005
6.May, P. W., Tsai, H. Y., Wang, W. N., and Smith, J. A., “Deposition of CVD diamond onto GaN,” Diamond and Related Materials, Vol. 15, pp. 526-530, 2006
7.Wu, C. C., Horng, R. H., Wuu, D. S., Chen, T. N., Ho, S. S., Ting, C. J., and Tsai, H. Y., “Thinning Technology for Lithium Niobate Wafer by Surface Activated Bonding and Chemical Mechanical Polishing,” Japanese Journal of Applied Physics, Vol. 45, No. 4B, part 1, pp. 3822-3827, 2006
8.Tsai, H. Y., “Characteristics of ZnO Thin Film Deposited by Ion Beam Sputter,” Journal of Materials Processing Technology, Vol. 192-193, pp. 55-59, 2007
9.Ting, C. J., Tsai, H. Y., Chou, C. P., Lin, H. Y., Wu, T. C., “Optical Characteristics of Silver Film on the Moth-Eye Structure,” Journal of Mechanical Science and Technology, Vol. 21, pp.1752-1755, 2007
10.Wu, C. W., Tsai, J. R. Tsai, H. Y., and Hsiao, C. C., “Fabrication of a metal mold with microstructures using a novel passive-alignment recombining technique,” Journal of Mechanical Science and Technology, Vol. 21, No. 10, pp. 1498-1504, 2007
11.Tsai, H. Y., Kuo, K. L., “Nitrogen effect on the diamond deposition processing by 915-MHz microwave plasma enhanced chemical vapor deposition reactor,” Journal of the Chinese Society of Mechanical Engineers, Vol. 28, No. 2, pp.157-162,2007
12.Tsai*, H. Y., Ting, C. J., and Chou, C. P., “Evaluation research of polishing methods for large area CVD diamond film produced by chemical vapor deposition,” Diamond and Related Materials, Vol. 16, pp.253-261, 2007
13. Tsai, H. Y., “Finite Difference Time Domain Analysis of Three-Dimensional Sub-wavelength Structured Arrays,” Japanese Journal of Applied Physics, Vol. 47, No. 6B, pp. 5007-5009, 2008
14.Tsai, H. Y., Kuo, K. L., and Wu, C. W., “Study of aluminum film deposition on the surface of micro-trench by dual ion beam sputtering,” Japanese Journal of Applied Physics, Vol. 47, No. 6B, pp. 5036-5038, 2008
15.Pan, C. T., Wu, T. T., Tsai, H. Y., Chou, M. C., and Wu, T. C., “Fabrication of a micro-punching head using LIGA and stacking processes,” Journal of Micromechanics and Microengineering, Vol. 18, 2008
16.Ting, C. J, Huang, M. C., Tsai, H. Y., Chou, C. P, and Fu, C. C., “Low Cost Fabrication of the Large-Area Anti-Reflection Films from Polymer by Nanoimprint/Hot-embossing Technology,” Nanotechnology, Vol. 19, No. 20, 2008
17.Tsai, H. Y., and Ting, C. J., “Optical characteristics of moth-eye structures on poly(methylmethacrylate) and polycarbonate sheets fabricated by thermal nanoimprinting processes,” Japanese Journal of Applied Physics, Vol. 48, 06FH19, 2009
18.Tsai, H. Y., Luo, S. W., Wu, C. W., and Wang, S. H., “Submicron-Structure Machining on Silicon by Femtosecond Laser,” Transactions of Nonferrous Metals Society of China, Vol. 19, pp. S171-S177, 2009
19.Tsai*, H. Y., Lee, C. Y., Wu, C. C. and Shih, E. P., “Microbial fuel cell performance of multiwall carbon nanotubes on carbon cloth as electrodes,” Journal of Power Sources, Vol. 194, pp. 199-205, 2009
20.Wang, S. H., Huang, C. S., Lee, W. S., Chen, T. H., Wu, C. C., Lien, C., and Tsai, H. Y., “Impact deformation behavior of duplex and superaustenitic stainless steels welds by split Hopkinson pressure bar,” Metals and Materials International, Vol. 15, No. 6, pp.1007-1015, Dec. 2009
21.Tsai, H. Y., Ting, C. J., “Low Cost Fabrication of Sub-wavelength Structures on Large-Area Polymer Sheet by UV Curing and Nano-Imprinting Processes,” Surface Review and Letters, Vol. 17, No. 3, pp. 1-7, 2010
22.Wu, H. C., Tsai, H. Y., Chiu, H. T., and Lee, C. Y., “Silicon Rice-Straw Array Emitters and Their Superior Electron Field Emission,” ACS Applied Materials & Interfaces, Vol. 2, No. 11, pp.3285-3288, 2010
23.Tsai, H. Y., Liu, H. C., Chen, J. H., and Yeh, C. C., “Low cost fabrication of diamond nano-tips on porous anodic alumina by hot filament chemical vapor deposition and the field emission effects,” Nanotechnology, Vol. 22, 235301, 2011
24.Tsai, H. Y. and Liu, Y. M., “Diamond Film Deposited Directly on Sapphire Substrate by Hot Filament Chemical Vapor Deposition,” Journal of the Chinese Society of Mechanical Engineers, Vol. 32, No. 1, pp.45-51, 2011
25.Luo, S. W., Chang, T. L.*, and Tsai, H. Y.*, “Fabrication of Glass Micro-prisms using Ultra-fast Laser Pulses with Chemical Etching Process,” Optics and Lasers in Engineering, Vol. 50, pp.220-225, 2012
26.Tsai, H. Y. and Yeh, C. C., “Fabrication of Glass Micro-prisms using Ultra-fast Laser Pulses with Chemical Etching Process,” Journal of the Electrochemical Society, Vol. 159, No. 1, pp.K1-K4, 2012
27.Tsai, H. Y. and Huang, Y. W., “Image Tracking Study on Courtship Behavior of Drosophila,” PLoS ONE, Vol. 7, No. 4, e34784, 2012
28.Tsai, H. Y. and Ting, C. J., “Optical Characteristics of Gold Film on the Moth-Eye Structure,” Current Applied Physics, Vol. 12, pp.S156-S159, 2012
29.Tsai, H. Y., Wu, C. W., Lin, Y. M. and Chang, H. C., “ Study on Diamond Thin Film Deposition on Graphite Substrate by Different Pretreatment Methods,” Journal of Ceramic Processing Research,Vol. 13 ,pp.S82-S88, 2012
30.Luo, S. W., Chang, T. L., and Tsai, H. Y., “Fabrication of Diffractive Microlens Array by Femtosecond Laser-assisted Etching Process,” Microelectronic Engineering,Vol. 98, pp. 448–452, 2012
31.Luo, S.-W. and Tsai, H.-Y., “Fabrication of 3D photonic structure on glass materials by femtosecond laser modification with HF etching process,” Journal of Materials Processing Technology, vol. 213, pp. 2262-2269, 2013
32.Shih-Chang Liu, Yung-I Chen, Hung-Yin Tsai, Kuo-Cheng Lin, Yung-Hsing Chen, “Thermal stability of Ir–Re coatings annealed in oxygen containing atmospheres,” Surface & Coatings Technology, Vol. 237, pp. 105–111, 2013
33.Shih-Chang Liu, Yung-I Chen, Jiin-Jyh Shyu, Hung-Yin Tsai, Kun-Yi Lin, YungHsing Chen, Kuo-Cheng Lin, “The chemical inertness of Ir–Re and Ta–Ru coatings in molding B2O3–ZnO–La2O3-based glass,” Surface & Coatings Technology, Vol. 259, pp. 352–357, 2014
34.Chen-Kuan Kuo, Shao-Wei Luo, Hung-YinTsai, Shing-Hoa Wang , Rudder T. Wu, Min-Chieh Chou, Tsong-Ru Tsai, Ming-Chan Shieh, Ya-Ching Yang and Kent Huang,”Nano-quasi-grating of optical diffraction on special stainless steel by a femtosecond-pulsed laser,” Materials Letters, vol. 138, pp. 29-32, 2015
35.H.Y. Tsai, W.H. Hsu, Y.K. Yu and R. Chen, “Using the effective surface permittivity method to analyse multilayer piezoelectric substrates for surface acoustic wave filters,” Journal of Mechanics, vol 31, pp.139-145, 2015
36.Ping-Huan Tsai, and Hung-Yin Tsai, “Fabrication and Field Emission Characteristic of Microcrystalline Diamond/Carbon Nanotube Double-layered Pyramid Arrays,” Thin Solid Films, vol. 584, pp. 330-335, 2015
37.Hung-Yin Tsai, Wei-Hsuan Hsu and Ying-Chen Huang, “Characterization of Carbon Nanotube/Graphene on Carbon Cloth as an Electrode for Air-cathode Microbial Fuel Cells,” Journal of Nanomaterials, Vol. 2015, 686891, 7 pages, 2015
38.Hung-Yin Tsai and Chi-Wei Kuo, “Thermal stress and failure location analysis for through silicon via in 3D integration,” Journal of Mechanics, Vol. 32, Issue 1, pp. 47-53, 2015
39.Hung-Yin Tsai, Shao-Wei Luo, and Tien-Li Chang, “Surface forming on glass material by femtosecond laser modification with HF etching process,” CIRP Annals Manufacturing Technology, vol. 1, pp. 205-208, 2015
40.Po-Tang Tseng and Hung-Yin Tsai, “Field emission characteristics of diamond nano-tip array fabricated by anodic aluminium oxide template with nano-conical holes,” Applied Surface Science, vol. 351, pp. 1004-1010, 2015
41.H. Y. Tsai, K. H. Yu, and M. K. Yeh, “Growth of nanocrystalline diamond films on quartz by hot-filament chemical vapor deposition,” Journal of Ceramic Processing Research, Vol. 16, No. 5, pp. 584~590 (2015)
42.I-Lin Chang, Ping-Huan Tsai, and Hung-Yin Tsai, “Field emission characteristics of CNFB-CNT hybrid material grown by one-step MPCVD,” Diamond and Related Materials, Vol. 69, pp. 229-236, 2016
43.Po-Tang Tseng, Ping-Huan Tsai, Anvert Lu, Jiang-Liang Hou, and Hung-Yin Tsai, “Field Emission Characteristic Study on Bristling Few-layer Graphite/Diamond Composite Film,” Diamond and Related Materials, vol. 73, pp. 121-131, 2017
44.Wei-Hsuan Hsu, Hung Yin Tsai and Ying-Chen Huang, "Characteristics of Carbon Nanotubes/Graphene Coatings on Stainless Steel Meshes Used as Electrodes for Air-cathode Microbial Fuel Cells," Journal of Nanomaterials, vol. 2017, 9875301, 9 pages
45.W. H. Hsu , M. C. Chou and H. Y. Tsai, " Design and Fabrication of Anisotropic Conductive Film for Application of Probe Card," Journal of Mechanics , vol. 33, No. 5, pp. 655-661, 2017
46.Ping-Huan Tsai, and Hung-Yin Tsai, “Carbon Nano-Flake Ball with a Sandwich-Structure Composite of Diamond Core Covered by Graphite Using Single-Step Microwave Plasma Chemical Vapor Deposition,” Carbon, vol. 136, pp. 1-10, 2018
47.Chih-Fan Hsu, Hung-Yin Tsai, Te-Hung Chen, " THE EFFECT OF MANUFACTURING PARAMETERS AND ENVIRONMENTAL FACTORS ON MECHANICAL PROPERTIES OF CARBON FIBER/EPOXY COMPOSITES," Journal of Mechanics, 2018 (accepted)
48.Tsung-yu Chou, Heng Li, Yu-Cheng Li, Hung-Yin Tsai and Ming-Cheng Yip, “Fabrication and Characteristics Study on Graphene-Reinforced Silver Nanowire/ Polybenzoxazine/ Epoxy Copolymer Composite Thin Films,” Polymer International, vol. 67, No. 5, pp. 1081-1093, 2018
49.Hung-Yin Tsai, Wei-Hsuan Hsu*, Yi-Jhu Liao, " Effect of Electrode Coating with Graphene Suspension on Power Generation of Microbial Fuel Cells," Coatings, vol. 8, No.7,p. 243 ,2018
50.Po-kai Chiu, Yi-Ting Liao, Hung-Yin Tsai, and Donyau Chiang, " Effect of electron-beam deposition process variables on the film characteristics of the CrOx films," AIP Advances, vol. 8, 025016, 2018
研討會論文
1.Hocheng, H., Tsai, H. Y., Shiue, J. J. and Wang, B., “Feasibility Study of Abrasive-Waterjet Milling of Fiber-Reinforced Plastics,” Proceedings of the 1995 Joint ASME Applied Mechanics and Materials Summer Meeting, ASME, pp. 93-114, 1995 (USA) (EI)
2.Hocheng, H., Tsai, H. Y. and Chen, L.-J., “A Kinematic Analysis of CMP Based on Velocity Model,” Proceedings of 2nd International CMP-MIC, pp. 277-280, Feb. 1997 (USA)
3.Hocheng, H., Tsai, H. Y., “The Analytical Aspect of the Preston Equation in Chemical Mechanical Planarization,” Proceedings ASME International Mechanical Engineering Congress and Exposition, MED-Vol. 8, pp. 33-36, 1998 (USA) (EI)
4.Hocheng, H., Tsai, H. Y., “A Bearing Model of Relative Motion between Wafer and Abrasives in Chemical Mechanical Planarization,” Proceedings of 1998 International Conference on Mechatronic Technology, pp. 489-492, 1998 (Taiwan)
5.Hocheng, H., Tsai, H. Y., Lai, K. C., Lin, H. Y. and Wu, T. C., “Kinematic Analysis of the Planetary Train in Chemical Mechanical Planarization,” Proceedings of euspen 1st Conference for Precision Engineering and Nanotechnology, pp. 384-387, 1999 (Germany)
6.Tsai, H. Y., Yang, H., Pan, C. T., Chou, M. C., “Laser Patterning Indium Tin Oxide (ITO) Coated on PET Substrate,” Proceedings of International Symposium on Microelectronics and Assembly, SPIE Vol. 4230, pp. 156-163, 2000 (Singapore) (EI)
7.Tsai, H. Y., Fan, C. H., Lin, H. Y., Wu, T. C., “Kinematic Analysis and Simulation of Ultra-precision Grinding Based on Velocity Model,” Proceeding of 5th Nano Engineering and Micro System Technology Workshop, pp.4-29-4-33, 2001 (Taiwan)
8.Chao, C. L., Ma, K. J., Hung, J. Y., Liu, Y. H., Chen, Y. T., Lin, H. Y., Chang, Y. M., Tsai, H. Y., “Investigation of the Machinability of CVD Diamond Film,” Proceeding of 5th Nano Engineering and Micro System Technology Workshop, pp. 2-15-2-19, 2001 (Taiwan)
9.Tsai, Hung-Yin, Cheng, Chih-Yung, Liu, Pin-Yin, and Wu, Tung-Chuan, “Innovation machining method on CVD diamond film,” Proceedings of International Symposium on Nano-Microtechnology: Materials, Processes, Packaging, and Systems, SPIE Vol. 4936, pp. 252-259, 2002 (Australia) (EI)
10.Huang, J. Y., Tsai, H. Y., Wu, C. H., Su, C. C., Fan, C. H., “Fabrication of Microstructure Using Electrochemical Etching in Hydrofluoric Acid,” Proceedings of International Symposium on Nano-Microtechnology: Materials, Processes, Packaging, and Systems, SPIE Vol. 4936, pp. 302-306, 2002 (Australia) (EI)
11.Hsieh, Chun-Hao, Tsai, Hung-Yin, Lai, Hua-Tan, Lin, Hung-Yi, “Comparison between Mechanical Method and Chemical-assisted Mechanical Method for CVD Diamond Film Polishing,” Proceedings of International Symposium on Nano-Microtechnology: Materials, Processes, Packaging, and Systems, SPIE Vol. 4936, pp. 337-344, 2002 (Australia) (EI)
12.Wu, C. H., Cheng, C. Y., Tsai, H. Y., “Study on the Characteristics of ZnO Thin Film Deposited by Ion Beam Sputter,” Proceeding of 7th Nano Engineering and Micro System Technology Workshop, 4 pages, 2003 (Taiwan)
13.Su, C. C., Lin, H. H., Tsai, H. Y., Chen, C. Y., Cheng, J. T., “Fabrication of Two-Dimensional Periodic Nanostructure in Gallium Arsenide Substrate,” Proceeding of 7th Nano Engineering and Micro System Technology Workshop, 4 pages, 2003 (Taiwan)
14.Liu, P. Y., Hsieh, C. H., Fan, C. H., Tsai, H. Y., Hong, F. C., Huang, S. M., “Innovation Study on Low Surface Roughness of Diamond Thin Film,” Proceeding of 7th Nano Engineering and Micro System Technology Workshop, 4 pages, 2003 (Taiwan)
15.Chao, C. L., Shiu, J. W., Ma, K. J., Chen, T. T., Tsai, H. Y., Lin, H. Y., “Laser Smoothing and Thermo-Chemical Polishing of CVD Diamond Film,” Proceeding of 7th Nano Engineering and Micro System Technology Workshop, 4 pages, 2003 (Taiwan)
16.Lin, Chien-Hung, Tsai, Hung-Yin, Chen, Rong-Shun, “Effect of Volumetric Shrinkage in Nanoimprint Lithography,” 2nd International Conference on Nanoimprint and Nanoprint Technology, 2003 (USA)
17.Chen, C. Y., Tsai, H. Y., Su, C. C., Lin, H. H., Cheng, J. T., “Parameters Study of High Density Electron Beam Recording,” Proceedings of International Conference on Mechatronic Technology, 2003 (Taiwan) (EI)
18.Wu, C. H., Liu, P. Y., Cheng, C. Y., Tsai, H. Y., “Preparation of ZnO Thin film on Free Standing Diamond Film by Ion Beam Sputter,” Proceedings of International Conference on Mechatronic Technology, 2003 (Taiwan) (EI)
19.Hsieh, Chun-Hao, Liu, Ping-Yin, Fan, Chin-Hon, Tsai, Hung-Yin, “Diamond Film Growth by 60-KW Microwave Plasma Enhanced CVD Method and Polished by Chemical-Assisted Mechanical Polishing Method,” 14th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, Nitrides and Silicon Carbide, 2003 (Austria)
20.Chen, C. Y., Tsai, H. Y., Su, C. C., Lin, H. H., Cheng, J. T., “Optimization of Optical Disk Mastering Process Using Electron Beam Recorder,” 2003 The 3rd IEEE Conference on Nanotechnology (IEEE-Nano 2003), pp. 486 – 489, 4 pages, 2003 (USA)
21.Hsieh, C. Y., Ting, C. J., Tsai, H. Y., Chang, Y. Y., Liu, P. Y., Wu, C. H., Cheng, C. Y., Chou, C. P., “The Effects of Surface Treatment on the Morphology of CVD Diamond Films by Electrophoretic Seeding and Ultrasonic Scratch Methods,” 2nd International Symposium on Nano manufacturing, 2004 (Korea)
22.Cheng, C. Y., Tsai, H. Y., Wu, C. H., Liu, P. Y., Hsieh, C. H., Chang, Y. Y., “An oxidation enhanced mechanical polishing technique for CVD diamond films,” 15th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, Nitrides and Silicon Carbide, 2004 (Italy)
23.Ho, Shih-Shian, Ting, Chia-Jen, Tsai, Hung-Yin, “Innovative fabrication method of 4” thin LiNbO3 layer on Si substrate for high frequency modulators,” Thin Films 2004 & Nano Tech 2004, 2004 (Singapore)
24.Wu, C. C., Horng, R. H., Wu, D. S., Chen, T. N., Ting, C. J., Tsai, H. Y., and Chou, C. P., “Thinning Technology for Lithium Niobate Wafer by Surface Activated Bonding and Chemical Mechanical Polishing,” 2005 International Conference on Solid State Devices and Materials, pp. 88-89, 2005 (Japan)
25.Hsieh, C. Y., Tsai, H. Y., Ting, C. J., Chang, Y. Y., Liu, P. Y., Wang, L. D., Yu, C. W., Chou, C. P., “The effects of nitrogen addition on the diamond films in a 915-MHz microwave plasma enhanced chemical vapor deposition (MPCVD) reactor,” 16th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, Nitrides and Silicon Carbide, 2005 (France)
26.Tsai, H. Y., Ting, C. J., Chang, Y. Y., Chou, C. P., “Nitrogen effect on the diamond deposition processing by 915-MHz microwave plasma enhanced chemical vapor deposition reactor,” International Manufacturing Leaders Forum 2006, 23rd-25th Oct., Taipei, Taiwan, 2006 (Taiwan)
27.Tsai, H. Y., “Characteristics of ZnO Thin Film Deposited by Ion Beam Sputter,” 7th Asia Pacific Conference on Materials Processing, 4th-6th Dec., 2006 (Singapore)
28.Ting, C. J., Tsai, H. Y., Hsu, C. J., Nieh, Y. Y., Chou, C. P., “Finite Difference Time Domain Analysis of 3-D Sub-Wavelength Structured Array for Antireflective Application,” International Display Workshops, 6th-8th Dec., Otsu, Japan, 2006 (Japan)
29.Tsai, H. Y., Ting, C. J., Kuo, K. L., Chou, C. P., “Feasibility Study on UV YAG Laser Patterning on Diamond Film,” Asia Pacific Conference on Optics Manufacturing 2007(Hong Kong)
30.Ting, C. J., Tsai, H. Y., Chou, C. P., “Fabrication of Large-Area Imprint Mold with High-Aspect-Ratio Nano tip Arrays of Sub-Micron Diameter,” Asia Pacific Conference on Optics Manufacturing 2007 (Hong Kong)
31.Tsai, H. Y., Chou, M. C., “Self-Oriented Patterned Arrays of Vertical Carbon Nanotubes for IC Probing Test Application,” 18th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, Nitrides and Silicon Carbide, Sep., 2007 (Germany)
32.Tsai, H. Y., Kuo, K. L., Ting, C. J., Chou, C. C., Wu, T. C., “Optical Characteristics of Silver Film on the Moth-Eye Structure,” International Conference on Advances in Materials and Processing Technologies, 7th-11th Oct.,2007 (Korea)
33.Wu, C. W., Tsai, J. R. Tsai, H. Y., and Hsiao, C. C., “Fabrication of a metal mold with microstructures using a novel passive-alignment recombining technique,” International Conference on Advances in Materials and Processing Technologies, 7th-11th Oct.,2007 (Korea)
34.Tsai, H. Y., Wu, Chih-We, Kuo, K. L., “Study of Aluminum Film Deposition on the Surface of Micro-Trench by Dual Ion Beam Sputtering,” 20th International Microprocesses and Nanotechnology Conferences, 5th-8th Nov., 2007 (Japan)
35.Ting, C. J, Tsai, H. Y.*, Hsu, C. J., Chou, C. P., “Finite difference time domain analysis of 3-D sub-wavelength structured arrays,” 20th International Microprocesses and Nanotechnology Conferences, 5th-8th Nov., 2007 (Japan) (corresponding author)
36.Tsai, H. Y. and Chang, C. C, “Characterization of Homoepitaxial Diamond Growth by Hot-Filament Chemical Vapor Deposition,” 2nd International Conference on New Diamond and Nano Carbons, 26th-29th May, 2008 (Taiwan)
37.Tsai, H. Y., and Lu, M. T., “Simulation Study of Anti-Reflective Effects for Different Submicron-structures,” 6th International Conference on Optics Design and Fabrication, 9th-11th June, 2008 (Taiwan)
38.Tsai, H. Y., “Optical Properties of Nanostructure Arrays on Large Area Polymer Sheet by UV Curing and Nano-imprinting Processes,” 4th International Conference on Technological Advances of Thin Films & Surface Coatings, 13th -16th July, 2008 (Singapore)
39.Tsai, H. Y., Luo, S. W., Wu, C. W., and Wang, S. H., “Micro-structure Machining on Silicon by Femtosecond Laser,” 1st International Symposium on Hybrid Materials and Processing, 27th-29th Oct., 2008 (Korea)
40.Tsai, H. Y., Ting, C. J., “Low Cost Fabrication of Sub-Wavelength Structures on Large-area Polymer Sheet by UV Curing and Nano-imprinting Processes,” 21st International Microprocesses and Nanotechnology Conferences, 27th-30th Oct., 2008 (Japan)
41.Hung-Yin Tsai, Hsuan-Chun Liu, Jhih-Hong Chen, and Chih-Cheng Yeh, “Study on Field Emission Characteristics of Diamond Nano-tip Array by Porous Alumina Template,” ICCES 2009, 8th-13th Apr., 2009 (Thailand)
42.Tsai, H. Y., and Ting, C. J., “Low Cost Fabrication of Sub-Wavelength Structures on Large-Area Polymer Sheet by UV Curing and Nano-Imprinting Processes,” The 3rd International Symposium on Functional Materials, 15th-18th June, 2009 (Korea)
43.Tsai, H. Y., and Liu, Y. M., “Diamond Film Deposited Directly on Sapphire Substrate by Hot Filament Chemical Vapor Deposition,” 2010 International Conference on Advanced Manufacture, 2nd-5th Feb., 2010 (Taiwan)
44.Y. F. Fan, H. Y. Tsai, M. H. Peng, and Y. W. Huang, “A Fast Method with Searching Window Constraint for Moving Object Detection on a Moving Platform,” The 7th IASTED International Conference on Signal Processing, Pattern Recognition and Applications, 17th-19th Feb., 2010 (Austria)
45.Chih-Wei Wu, Chih-Heng Chi, Hung-Yin Tsai and Yung-Kang Shen, “Fabrication of a Large-Area Silicon Mold with Microstructures Using a Novel Recombining Technique,” The 9th Asia-Pacific Conference on Materials Processing, 7th-10th, June 2010 (Australia)
46.Hung-Yin Tsai, Chih-Cheng Chang and Chih-Wei Wu, “Nitrogen and Bias Effect on Homoepitaxial Diamond Growth by Hot-Filament Chemical Vapor Deposition,” The 9th Asia-Pacific Conference on Materials Processing, 7th-10th, June 2010 (Australia)
47.Hung-Yin Tsai and Chih-Cheng Yeh, “Shielding Effects Study on Field Emission Characteristics of Diamond Nano-tip Array,” 21st European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, Nitrides and Silicon Carbide, 5th-9thSep., 2010 (Hungary)
48.S. W. Luo, T. L. Chang*, H. P. Yang, and H. Y. Tsai, “Wetting Properties on Hydrophobic Surface Structuring of Poly (Ethylene Terephthalate) by Femtosecond Laser Ablation,” 23rd International Microprocesses and Nanotechnology Conferences, 9th-12th Nov., 2010 (Japan)
49.J. J. Kai, J. T. Yang, Z. Y. Wu, M. K. Yeh, and H. Y. Tsai, “Establishing Instructional Equipment of Remote Control Scanning Electron Microscope for incubating K-12 Human Resource of Nanotechnology,” IADIS e-Society 2011, 10th-13th March, 2011 (Spain)
50.Meng-Kao Yeh, Hsiao-Chin Hsieh, Shu-Hsian Chang, Rong-Shun Chen, Hung-Yin Tsai, “Learning Achievement of K-12 Students Participating in a Nanotechnology Hands-on Works Exhibition,” 2011 Canada International Conference on Education, 4th-7th April, 2011 (Canada)
51.Hung-Yin Tsai, Yen-Po Lin, and Cheng-Che Chen, “Tracking and Detecting Moving Objects Using Stereo Camera on Moving Platform,” 21st International Conference on Flexible Automation and Intelligent Manufacturing, 26th-29thJune, 2011 (Taiwan)
52.Hung-Yin Tsai, Ching-Wen Liu, Chih-Cheng Yeh, and Eric Pierre Shih, “Fabrication of AR film using Nano-imprint lithography with a diamond mold,” 21st International Conference on Flexible Automation and Intelligent Manufacturing, 26th-29thJune, 2011 (Taiwan)
53.H.Y. Tsai, J.J. Kai, J.T. Yang, Z.Y. Wu, and M.K. Yeh, “Nanotechnology Education with Remote Control Scanning Electron Microscope in Taiwan,” ICEE 2011, 21st-26th Aug., 2011 (UK)
54.H. Y. Tsai, M. T. Lu, and S. W. Luo, “Simulation Study on Anti-Reflective Effects for Different Submicron-structures,” Advanced Design and Manufacturing Engineering 2011, 16th-18th Sep., 2011 (China)
55.Chi-Wei Kuo, and Hung-Yin Tsai, “Thermal stress analysis and failure mechanisms for through silicon via array,” International Microsystems, Packaging, Assembly and Circuits Technology Conference 2011, 19th-21st Oct., 2011 (Taiwan)
56.Tsai, H. Y., Ting, C. J., “Optical Characteristics of Gold Film on the Moth-eye Structure,” 2nd International Symposium on Hybrid Materials and Processing, 27th-29th Oct., 2011 (Korea)
57.Tsai, H. Y., Wu, C. W. Wu, Lin, Y. M. and Chang, H. C., “Study on Diamond Thin Film Deposited on Graphite Substrate by Different Pretreatment Methods for MOCVD Application,” 2nd International Symposium on Hybrid Materials and Processing, 27th-29th Oct., 2011 (Korea)
58.Ying- Chen Huang and Hung-Yin Tsai, “Study on Carbon-based Electrode for Air-cathode Microbial Fuel Cell,” 2012 7th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 5th-8th March, 2012 (Japan)
59.Cheng-Che Chen, Hung-Yin Tsai, and Dein Shaw, “Moving object detection on a moving platform using stereo feature points prediction method,” The ASME Verification and Validation Symposium (V&V2012), 2nd-4th May, 2012 (USA)
60.Chi-Wei Kuo and Hung-Yin Tsai, “Thermal stress analysis and failure locations for through silicon via array,” ITherm 2012, 30th May-1st June, 2012 (USA)
61.H. Y. Tsai and S. W. Luo, “Fabrication of 3D photonic structure on glass materials by femtosecond laser modification with HF etching process,” 62nd CIRP General Assembly 2012, 19th-25th Aug., 2012 (Hong Kong)
62.Hung-Yin Tsai, Kun-Han Yu and Meng-Kao Yeh, “Growth of Nano Crystalline Diamond Films on Quartz by Hot-filament Chemical Vapor Deposition,” CIRP 2013, 23th-25th Jan., 2013 (France)
63.Hung-Yin Tsai, and Yu-Ching Lin “Image Processing Study on Monitoring Individual Drosophila,” ICCES 2013, 24th-28th March, 2013 (USA)
64.Y. C. Lin, Y. R. Lin, R. Chen and H. Y. Tsai, “Automatic Collector of Virgin Drosophila,” CIRP 2013, 18th -24th Aug, 2013 (Denmark)
65.Hung-Yin Tsai and Po-Tang Tseng, “Field Emission Characteristics of Diamond Nano-tip Array Fabricated by Anodic Aluminum Oxide Template with Nano-conical Holes,” International Conference on Diamond and Carbon Materials 2013, 2th-5th Sep, 2013 (Italy)
66.Hung-Yin Tsai, Mei- Yu Chang and Shiang-Yi Chiou. (2014) “Student learning performance on the nanotechnology teaching in the elementary school by instructional media,” 2014 International Symposium on Education, Psychology and Social Sciences 2014, 7th-9th May, 2014 (Japan)
67.Hung-Yin Tsai and Ying-Hsuan Chien, “Experimental and Modeling Analysis on Cell-Wall Fracture of Nannochloropsis Oculata,” International Conference on Nonlinear Problems in Aviation and Aerospace 2014, 15th-18th July, 2014 (Norway)
68.Ping-Huan Tsai and Hung-Yin Tsai, “Fabrication and Field Emission Characteristic of Microcrystalline diamond/Carbon nanotube Double-layered Pyramid Arrays,” The 7th International Conference on Technological Advances of Thin Films & Surface Coatings 2014, 15th-18th July, 2014 (China)
69.Po-Tang Tseng, Hung-Yin Tsai, Chih-Chiang Weng, and Jui-Mei Hsu, “Surface Characteristics of Deposited SiOx film Using Hexamethyldisiloxane (HMDSO) Precursor by Atmospheric Pressure Jet,” The 7th International Conference on Technological Advances of Thin Films & Surface Coatings 2014, 15th-18th July, 2014 (China)
70.H.Y. Tsai and J. J. Ma, “Study on field emission characteristics of nano-diamond tips growth on AAO templates with different aspect ratios,” 64th CIRP General Assembly 2014, 24th-30th Aug, 2014 (France)
71.Tung-Che Lee, Shih Chun Tseng and Hung-Yin Tsai, “Diffusion effect of low temperature growth multi-wall carbon nanotubes on metal alloys substrate by thermal-CVD,” 7th Vacuum and Surface Sciences Conference of Asia and Australia 2014, 5th-9th Oct, 2014 (Taiwan)
72.H.Y. Tsai, K. H. Yu, and M. K. Yeh, “Growth of nanocrystalline diamond films on quartz by hot-filament chemical vapor deposition,” 3th International Symposium on Hybrid Materials and Processing 2014,10th-13th Nov, 2014 (Korea)
73.H.Y. Tsai, I.L. Chang and P.H. Tsai, “One-step growth of CNFB-CNT hybrid materials by MPCVD to enhance field emission properties,” 26th edition of the International Conference on Diamond and Carbon Materials 2015, 6th-10th Sep, 2015 (Germany)
74.H.Y. Tsai and P.H. Tsai, “Fabrication and Field Emission Characteristic of Carbon Nano- Flake Ball,” 26th edition of the International Conference on Diamond and Carbon Materials 2015, 6th-10th Sep, 2015 (Germany)
75.Po-Tang Tseng, Ping-Huan Tsai, Anvert Lu, Jiang-Liang Hou, and Hung-Yin Tsai, “Field Emission Characteristic Study on Vertical Few-Layer Graphite/Diamond Composite Film,” The 10th International Conference on New Diamond and Nano Carbons 2016, 22th-26th May, 2016 (China)
76.Yi-Chi Pan, Ching-Hsin Chen, Hung-Yin Tsai, "Rotation-Invariant Feature Matching for Defect Detection on Microscopic Image at Wafer Level," The 5th International Conference on Virtual Machining Process Technology (VMPT 2016), May 22-25, Taipei, Taiwan, 2016
77.Huang, C. W., Chen, Y. H., Tsai, H. Y., “The Study on Femtosecond Laser Induced Periodic Surface Structures(FLIPSS) on STAVAX and Ni-coated STAVAX,”Optical Engineering Taiwan Photonics Society,Vol.140,pp 45-54, 2017 (Taiwan)
78.Hocheng, H., Tsai, H. Y., Lai, K. C., Lin, H. Y., and Wu, T. C., “A Kinematic Analysis of Chemical Mechanical Planarization Based on Velocity Model of the Planetary Train,” 第三屆奈米工程暨微系統技術研討會論文集, pp. 4-05-4-08, 1999 (Taiwan)
79.Chang, F. Y., Ting, C. J., Tsai, H. Y., Lin, H. Y., Wu, T. C., “Fine Grinding and Polishing Process for Next Generation Photomask Substrate,” 第四屆奈米工程暨微系統技術研討會論文集, pp. 2-53-2-59, 2000 (Taiwan)
80.Pan, C. T., Tsai, H. Y., Lin, Y. S., Yang, J. J., Liu, M. Y., Chen, S. C., Chou, M. C., Yang, H. H., “Micro-optical Components Fabricated by Excimer Laser Ablation,” 第四屆奈米工程暨微系統技術研討會論文集, pp. 2-129-2-137, 2000 (Taiwan)
81.黃珩春、楊詔中、蔡宏營、陳世洲、沈聖智，「奈米加工技術於光通訊被動元件之製造設計」，機械工業雜誌，89年8月號(221)， pp. 148-160
82.蔡宏營、潘正堂、周敏傑、陳世洲、吳東權，“Feasibility Study of Laser ablating ITO coated on Plastic Substrate,”第四屆奈米工程暨微系統技術研討會論文集， pp. 2-115-2-121， 2000 (Taiwan)
83.周敏傑、王宏杰、蔡宏營， “Development Study of X-Ray Photoresist (PMMA),” 第四屆奈米工程暨微系統技術研討會論文集， pp. 3-21-3-27, 2000 (Taiwan) (in Chinese)
84.蔡宏營、 林宏彝、 吳東權，「超精密輪磨加工之運動學分析與模擬」， 第三屆磨粒加工技術論文發表會論文集， pp. 93-96, 2001 (Taiwan)
85.蔡宏營、 劉丙寅、程智勇、 吳志宏、 吳東權，「觸媒輔助鑽石膜平坦化技術」，第六屆奈米工程暨微系統技術研討會論文集， 2002 (Taiwan)
86.謝浚豪、 賴華堂、蔡宏營、 林宏彝，「機械拋光與化學輔助機械拋光對加工CVD鑽石膜之比較」， 第六屆奈米工程暨微系統技術研討會論文集， 2002 (Taiwan)
87.吳志宏、程智勇、蔡宏營，「表面聲波濾波器發展現況及未來機會」，機械工業雜誌，91年8月號(233) ， pp. 82-87
88.鄭瑞庭、蔡宏營、林熙翔、蘇建彰、陳建洋，「簡介下世代微影技術與奈米轉印微影技術」, 機械工業雜誌，92年8月號(245)，pp. 106-116
89.蔡宏營、鄭瑞庭、陳建洋，「淺談光子晶體發光二極體」， 機械工業雜誌， 92年8月號(245) ， pp. 117-128
90.蔡宏營，「奈米轉印技術介紹」，中華民國力學學會會訊，104期，92年9月，10 pages (invited)
91.蔡宏營、林家弘，「奈米轉印製程與設備技術」，機械月刊，93年5月號（第346期），pp. 28-39
92.謝丞聿、張延瑜、蔡宏營、王良德、藍春發，「CVD鑽石添加氮氣效應研究現況」，機械工業雜誌，94年8月號(269 )，pp. 21-29
93.劉丙寅、游家瑋、蔡宏營、葉性銓、丁嘉仁，「異質晶圓接合機制探討及發展現況」，機械工業雜誌，94年8月號(269)，pp. 5-20
94.吳嘉城、 陳采寧、 洪瑞華、 何世賢、 丁嘉仁、蔡宏營、 武東星，「鈮酸鋰複合晶圓延性製程技術開發」，中國材料科學學會2005年年會， pp. 326, 2005 (Taiwan)
95.蔡宏營、 丁嘉仁、 許沁如、 周長彬，「三維次波長奈米結構陣列應用於抗反射薄膜之時域有限差分法研究」， 第十屆奈米工程暨微系統技術研討會，2006 (Taiwan)
96.蔡宏營、張志成、周敏傑、林經協、江億龍，「奈米碳管應用在場發射顯示應用之美國專利介紹與分析」，工業材料，96年1月號(241)，pp. 153-169
97.蔡宏營、 張志成、江海邦，「熱燈絲化學氣相沈積成長同質磊晶鑽石薄膜之研究」，中國機械工程學會第二十四屆全國學術研討會， 23rd-24th Nov. ， 2007 (Taiwan)
98.蔡宏營、 陳智鴻，「利用多孔性陽極氧化鋁模板製備奈米鑽石針尖陣列之研究」，中國機械工程學會第二十四屆全國學術研討會， 23rd-24th Nov. ， 2007 (Taiwan)
99.張天立、羅紹維、姚中翰、周大鑫、蘇志杰、蔡宏營、林宏彝，「雷射超精密微奈米結構加工技術介紹」，機械工業雜誌，97年9月號(306)，pp. 2-12
100.蔡宏營、 李志源、吳振昌，「具奈米碳管之碳布電極應用於微生物燃料電池之產電效能研究」， 中國機械工程學會第二十四屆全國學術研討會， 21st-22nd Nov.， 2008 (Taiwan)
101.劉烜君、 陳智鴻、 葉致成、 蔡宏營，「以多孔性氧化鋁模板製備奈米鑽石針尖場發射特性之研究」， 中華民國力學學會第三十二屆全國力學會議， 28th-29th Nov. ， 2008 (Taiwan)
102.羅紹維、 王星豪、 蔡宏營，「飛秒雷射微結構加工與其截面形狀模擬研究」， 中華民國力學學會第三十二屆全國力學會議， 28th-29th Nov. ， 2008 (Taiwan)
103.蔡宏營、 簡胤軒、 郭騏緯、 李桂宣、 周大鑫、 蘇志杰， 「應用於生質能之綠球藻細胞破壁機械與壓力梯度應力分析」， 中國機械工程學會第二十六屆全國學術研討會，20th-21st Nov.，2009 (Taiwan)
104.蔡宏營、林諺伯，「利用雙相機於移動平台上偵測並追蹤移動物體技術」， 中國機械工程學會第二十七屆全國學術研討會， 10th-11th Dec. ， 2010 (Taiwan)
105.林彥銘、張皓鈞、蔡宏營，「前處理法對於鑽石薄膜沈積於石墨應用於有機金屬化學氣相沈積之研究」，中國機械工程學會第二十七屆全國學術研討會，10th-11th Dec. ， 2010 (Taiwan)
106.沈彥廷、王雨弘、蔡宏營，「高爾夫球運動參數擷取與軌跡分析」，中國機械工程學會第二十八屆全國學術研討會， 10th-11th Dec. ， 2011(Taiwan)
107.曾柏棠、蔡宏營，「錐形陽極氧化鋁孔洞陣列之製程研究」， 中華民國力學學會第三十六屆全國力學會議，16th-17th Nov. ，2012 (Taiwan)
108.徐逢懋、 蔡宏營，「果蠅睡眠監控平台影像處理」，中華民國力學學會第三十六屆全國力學會議,16th-17th Nov. ， 2012 (Taiwan)
109.陳冠宇、 許智帆、今井壽、近藤勝義、蔡宏營，「高強度極高傳導性質的銅鈦/奈米碳纖複合材料研究」， 中國機械工程學會第三十一屆全國學術研討會， 6th-7th Dec.， 2014 (Taiwan)
110.許智帆、 蔡宏營，「製造參數對碳纖/環氧樹脂複合材料機械性質的影響」，2014台灣風能學術研討會暨NEPII離岸風力及海洋能源主軸成果發表會，16th Dec.，2014 (Taiwan)
111.許智帆、蔡宏營，「製造參數與環境因子對碳纖/環氧樹脂複合材料機械性質的影響」，2016 CTAM Conference on Theoretical and
京公网安备 11010802027423号