近期论文
查看导师新发文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
研討會論文
1.T.M. Liou, Dec 2009, “Haemodynamics in Intracranial Aneurysms with and without Stents,“ 2009 NTHU Bio-X Cross-Discipline Minu-Symposium, Hsin Chu, Taiwan
2.T.M. Liou, Nov 2009, “Visualization of Inkjet Droplet Deposition – PLED and Solar Cell Related Thin Film Coating,“ The 7th Pacific Symposium on Flow Visualization and Image Processing (PSFVIP-7), Kaohsiung, Taiwan, ROC (An Invited Plenary Speech)
3.T.M. Liou, Sep 2009, “Application of Inkjet Printing Technique to Energy Related Thin Film Coating, “ Cross-Strait Symposium of Tsing Hua University on Energy and Nano Techniques, Peking, China
4.T.M. Liou, July-Aug 2009, “Study on the characteristics of polymer droplet deposition in fabricated rectangular microcavities,“ The 16th National CFD Conference, Dansui, Taiwan, ROC (An Invited Keynote Lecture)
5.T.M. Liou, S.W. Chang, J.S. Chen, and C.Y. Chan, Jun 2009, “Fluid Flow inside a Rectangular Duct with Two Opposite Walls Roughened by Deepened Scales,“GT2009-59302, The 54th Gas Turbine and Aeroengine Congress/Users Symposium and Exposition, Orlando, USA
6.T.M. Liou and T.C. Wang, Apr 2009, "Intra-Aneurysmal Hemodynamics for Curved Vessel Installed with Wallstent," The 4th Asian Pacific Conference on Biomechanics, Christchurch, New Zealand, ROC
SCI期刊論文
1.Liou TM, Chang SW, Chen JS, et al., “ Fluid Flow inside a Rectangular Duct with Two Opposite Walls Roughened by Deepened Scales,”JOURNAL OF THE CHINESE SOCIETY OF MECHANICAL ENGINEERS, Vol. 31, Issue: 3, pp. 187-198, 2010.
2.Chang SW, Lees AW, Liou TM, et al. “Heat transfer of a radially rotating furrowed channel with two opposite skewed sinusoidal wavy walls,” INTERNATIONAL JOURNAL OF THERMAL SCIENCES, Vol. 49, Issue: 5, pp. 769-785, 2010.
3.Chang SW, Liou TM, and Po Y, “Coriolis and rotating buoyancy effect on detailed heat transfer distributions in a two-pass square channel roughened by 45 degrees ribs at high rotation numbers,” INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol. 53, Issue: 7-8, pp. 1349-1363, 2010.
4.Chang SW, Liou TM, Yang TL, et al., “Heat Transfer in Radially Rotating Pin-Fin Channel at High Rotation Numbers,” JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, Vol. 132, Issue: 2, 2010.
5.T.-M. Liou, S.W. Chang, J.S. Chen, T.L. Yang, and Yi-An Lan, Nov 2009, "Influence of Channel Aspect Ratio on Heat Ttransfer in Rotating Rectangular Ducts with Skewed Ribs at High Rotation Numbers,” International Journal of Heat and Mass Transfer, Vol.52, No.23-24, pp.5309-5322 (SCI, EI)
6.T.M. Liou, C.Y. Chan, and K.C. Shih, Aug 2009,“Effects of Actuating Waveform, Ink Property, and Nozzle Size on Piezoelectrically Driven Inkjet Droplets,” Journal of Microfluidics and Nanofluidics (MNF) (SCI, EI)
7.T.-M. Liou, C.Y. Chan, and K.C. Shih, June 2009, “Study of the Characteristics of Polymer Droplet Deposition in Fabricated Rectangular Microcavities,” Journal of Micromechanics and Microengineering (JMM), Vol.19, No.6, 065028 (SCI, EI)
8.T.H. Shieh, T.M. Liou, M.R. Li, C.H. Liu, and W.J. Wu, Apr 2009, "Analysis on Numerical Results for Stage Separation with Different Exhaust Holes,” International Communications in Heat and Mass Transfer, Vol.3, No.4, pp.342-345 (SCI, EI)
9.S.W. Chang, T.L. Yang, T.M. Liou, and G.F. Hong, Jan 2009, “Heat Transfer of Rotating Rectangular Duct with Compound Scaled Roughness and V-Ribs at High Rotation Number,” International Journal of Thermal Sciences, Vol.48, pp.174-187 (SCI, EI)
10.S.W. Chang, T.L. Yang, T.M. Liou, and H.G. Fang, Dec 2008, Heat Transfer in Rotating Scale-Roughened Trapezoidal Duct at High Rotation Numbers, Applied Thermal Engineering (SCI, EI) (in press)
11.S.W. Chang, T.M. Liou, J.S.Lioug, and K.T.Chen, Nov 2008, “Turbulent Heat Transfer in a Tube Fitted with Serrated Twist Tape under Rolling and Pitching Environments with Applications to Shipping Machineries,” Journal of Ocean Engineering, Vol.35, No.16, pp.1569-1577 (SCI, EI)
12.T.M. Liou, and Y.C. Li, June 2008, Effects of Stent Porosity on Hemodynamics in a Sidewall Aneurysm Model,” Journal of Biomechanics, Vol.41, No.6, pp.1174-1183 (SCI, EI)
13.S.W. Chang, T.M. Liou, S.F. Chiou, and S.F. Chang, June 2008,“Heat Transfer in High-Speed Rotating Trapezoidal Duct with Rib-Roughened Surfaces and Air Bleeds from the Wall on the Apical Side,“GT2007-28174, Trans. ASME, Journal of Heat Transfer, Vol.130, No.6, pp.061702-1 to 13 (SCI, EI)
14.T.M. Liou, Y.C. Li, and T.C .Wang, June 2008, “Hemodynamics altered by placing helix stents in an aneurysm at 45-deg angle to the curved vessel,” Physics in Medicine and Biology, Vol.53, pp.3763-3776 (SCI, EI)) (Impact Factor = 2.874)
15.S.W. Chang, T.M. Liou, T.L. Yang, and G.F. Hong, June 2008, "Heat Transfer in Radially Rotating Pin-fin Channel at High rotation numbers," Trans. ASME, Journal of Turbomachinery, Vol.xxx, pp.xxx-xxx (A Selected Paper (GT2008-50514) from the 51th Gas Turbine and Aeroengine Congress/Users Symposium and Exposition, Berlin, Germany) (SCI, EI). (in press)
16.T.M. Liou, C.Y. Chan, C.C. Fu, and K.C. Shih, Apr 2008,“Effects of Impact Inertia and Surface Characteristics on Deposited Polymer Droplets in Microcavities,” IEEE J. MEMS, Vol.17, No.2, pp.278-287 (SCI, EI)
17.S.W. Chang, T.L. Yang, T.M. Liou, and G.F. Hong, March 2008, Heat Transfer of Rotating Rectangular Duct with Compound Scaled Roughness and V-ribs at High Rotation Number, International Journal of Thermal Sciences, Vol.48, Issue 1, pp.174-187 (SCI, EI)
18.S.W. Chang, T.M. Liou, K.F. Chiang, and G.F. Hong, Feb 2008, "Heat Transfer and Pressure Drop in Rectangular Channel with Compound Roughness of V-Shaped Ribs and Deepened Scales" International Journal of Heat and Mass Transfer, Vol.51, pp.457-468 (SCI, EI)
19.W.K Chang, C.H. Chen and T.M. Liou, 2008 “Numerical Study for Downward Flame Spread over a Finite-Length PMMA with Radiation Effect,” International Journal of Transport Phenomena (SCI, EI)(in press)
20.T.M. Liou, S.W. Chang, J.H. Hung, and S.F. Chiou, Sep 2007, " High Rotation Number Heat Transfer of a 45-deg Rib-Roughened Rectangular Duct with Two Channel Orientations" International Journal of Heat and Mass Transfer, Vol.50, pp.4063-4078. (SCI, EI)
21.S.W. Chang, W.D. Morris,T.M. Liou, and S.F. Chiou, July-Sep 2007, "Heat transfer in a Reciprocating Thermosyphon Fitted with two staggered transverse ribs,” AIAA Journal of Thermophysics and Heat Transfer, Vol.21, No.3, pp.568-581 (SCI, EI)
22.T.M. Liou, Y.S. Hwang and M.Y. Chen, June 2007, “Heat Transfer Improvement by Arranging Detached Ribs on Suction Surfaces of Ribbed Rotating Internal Coolant Passages,” International Journal of Heat and Mass Transfer, Vol.50, Issue11-12, pp.2414-2424 (SCI, EI)
23.T.M. Liou, Y.C. Li, and W.C. June, June 2007, “Numerical and Experimental Studies on Pulsatile Flow in Aneurysms Arising Laterally from a Curved Parent Vessel at Various Angles,” Journal of Biomechanics, Vol.40, No.6, pp.1268-1275 (SCI, EI)
24.S. W. Chang, T.M. Liou, W.-H. Yeh and J.-H. Hung, Feb 2007, "Heat Transfer in a Radially Rotating Square-Sectioned Duct With Two Opposite Walls Roughened by 45-deg Staggered Ribs at High Rotation Numbers," Trans. ASME, Journal of Heat Transfer, Vol.129, Issue 2, pp.188-199 (SCI, EI)
25.T.M. Liou, H. Chen, M.Y. Chen and Y.C. Li, Feb 2007, " Experimental Study of Confined Turbulent Rectangular Jets,” Journal of the Chinese Society of Mechanical Engineers, Vol. 28, No.1, pp45-51. (An Invited Paperfor a Special Issue Dedicated to Dr. T.Y. Wung on His 75th Birthday) (SCI, EI)
26.T.M. Liou and Y.C. Li, Oct 2006, "Alteration of Haemodynamics in a Stented Lateral Aneurysm Model by Blocking Ratios," WSEAS Transaction on Fluid Mechanics, Issue.8, Vol.1, pp.850-855 (A Selected Paper from 3rd WSEAS International Conference on Mathematical Biology and Ecology (MABE’07), Brisbane, Australia)
27.T.M. Liou, C.H. Tsai, Y.C. Li, T.W. Ting, and C.B. Luo, May 2006, “Numerical Analysis of Steady Blood Flow in Three Dimensional Reconstructed Left Internal Carotid Artery with an Aneurysm,” Journal of Aeronautics, Astraonautics and Aviation, Series B, Vol.38, No.1, pp.029-036 (SCI).
28.T.M. Liou, Yi-Sian Hwang and Yi-Chen Li, April 2006, "Flowfield and Pressure Measurements in a Rotating Two-Pass Square Duct with staggered Rounded Ribs Skewed 45-deg to the Flow," Trans. ASME, Journal of Turbomachinery, Vol.128, pp.340-348 (A Selected Paper (GT2004-53173) from the 49th Gas Turbine and Aeroengine Congress/Users Symposium and Exposition, Vieena, Austria (SCI, EI)).