近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
研討會論文
1.Yeh, M. K., Tai, N. H. and Hsieh, C. C., 2010, “Thermal Conductivities of AlN and Al Reinforced Silicone Rubber,” Proceedings of the 27th National Conference on Mechanical Engineering, CSME, December 10-11, Taipei, Taiwan, ROC, Paper No. DD04-012 (in Chinese)
2.Yeh, M. K., Tai, N. H., Song, C. S. and Hsieh, C. C., 2010, “Mechanical and Electric Properties of Carbon Nanotubes/Epoxy Nanocomposites with NMP,” Proceedings of the 7th Asian-Australasian Conference on Composite Materials, ACCM-7, November 15-18, Taipei, Taiwan, Paper No. THU-SE28-06
3.Yeh, M. K., and Huang, W. H., 2010, “Critical Strain Energy Release Rate of Crack-Embedded Sandwich Structure by Finite Element Method,” Proceedings of the 7th Asian-Australasian Conference on Composite Materials, ACCM-7, November 15-18, Taipei, Taiwan, Paper No. THU-SE32-06
4.Yeh, M. K., and Chiu Y. W., 2010, “Bending Behavior of Sandwich Beam with a Central Debonding Region,” Proceedings of the 7th Asian-Australasian Conference on Composite Materials, ACCM-7, November 15-18, Taipei, Taiwan, Paper No. THU-SE32-07
5.Yeh, M. K., Lin, M. C. and Wang, H. Y., 2010, “Deformation Analysis of Circular Cylindrical Shells of Finite Length under External Pressure,” Proceedings of the 34th National Conference on Theoretical and Applied Mechanics, November 19-20, Yunlin, Taiwan, ROC, Paper No. C0033 (in Chinese)
6.Yeh, M. K. and Kao, Y. C., 2010, “Material Properties of Nanoporous Anodic Aluminum Oxide by Parametric Study,” Proceedings of the 34th National Conference on Theoretical and Applied Mechanics, November 19-20, Yunlin, Taiwan, ROC, Paper No. C0044 (in Chinese)
7.Yeh, M. K. and Lu, C. L., 2010, “Thermal Cycling Analysis of Microgyroscope Chip Embedded with Through-Silicon Vias by Finite Element Method,” International Microsystems, Packaging, Assembly and Circuits Technology conference, IMPACT, Oct. 20-22
8.Yeh, M. K. and Lu, C. L., 2010, “Thermal Stress and Thermal Cycling Analyses of Microgyroscope Chip Models,” The 8th International Conference on Fracture and Strength of Solids, FEOFS, June 7-9, Kuala Lumpur
9.Yeh, M. K. and Lu, C. L., 2010, “The Effect of Thermal Prestress on the Deformation of Micromirror Chip Embedded with Through-Silicon Vias,” The 8th International Conference on Fracture and Strength of Solids, FEOFS, June 7-9, Kuala Lumpur
10.Huang, W. H., Yeh*, M. K. and Lai, Y. Y., 2009, “Energy Release Rate of Crack-Embedded Sandwich Structure with Nanocomposites as Core Materials,” 2009 AASRC/CSCA Joint Conference, 12 December, Taipei, Taiwan, ROC, Paper No. AA10-173, 2009 (in Chinese)
11. Yeh*, M. K. and Lai, Y. Y., 2009, “End-Notched Flexure Test of Sandwich Structure with Nanocomposites Core,” Proceedings of the 33th National Conference on Theoretical and Applied Mechanics, November 13-14, Miaoli, Taiwan, ROC, Paper No. E2-501 (in Chinese)
12.Yeh*, M. K. and Lu, C. L., 2009, “Thermal Stress Analysis of Different 3D Heterogeneous Integrated Chip Models,” Proceedings of the 26th National Conference on Mechanical Engineering, CSME, November 20-21, Tainan, Taiwan, ROC, Paper No. E05-020, 2009 (in Chinese)
13.Yeh*, M. K. and Tseng, J. L., 2009, “Thermal Stress Analysis of 3D Hetergeneous Micro System on Chip,” 13th Nano Engineering and Micro System Technology Conference, July 9-10, Hsinchu, Taiwan, ROC, Paper No. 01-1214 (in Chinese)
14.Tsai, T. Y., Tseng, S. H., Tai*, N. H. and Yeh, M. K., 2009, “Synthesis of Carbon Nanotubes and Its Applications in Flexible Field Emission Device and Composites,” The 17th International Conference on Composite Materials, ICCM-17, July 27-31, 2009, Eidinberg, UK
15.Yeh*, M. K. and Tseng, J. L., 2008, " Thermal Residual Stress Analysis of SOG Module with Embedded Through-Wafer Silicon Vias," Proceedings of the 25th National Conference on Mechanical Engineering, CSME, November 21-22, Changhua, Taiwan, ROC, Paper No.CSME25-847 (in Chinese)
16.Yeh*, M. K., Tai, N. H. and Wu, T. H., 2008, "Mechanical Properties of Acrylic Bone Cement by FEM and Experiment," Proceedings of the 32th National Conference on Theoretical and Applied Mechanics, November 28-29, Chiayi, Taiwan, ROC, Paper No. F011 (in Chinese)
17.Yeh*, M. K., Lin, C. M., 2008, “Fracture Strength of MWNT/Polymer Nanocomposites,”Proceedings of Asian Conference on Mechanics of Functional Materials and Structures, ACMFMS 2008, Oct.31-Nov.3, Matsue, Shimane, Japan, pp. 357-360.
18.Yeh*, M. K., Tai, N. H., Ling G. C. and Huang, C. Y., 2008, “Electromagnetic Shielding Effectiveness of Double-Layer MWNT /Epoxy Nanocomposites,” Proceedings of 16rth International Conference on Composites Engineering, ICCE-16, July 20-26, 2008, Kunming, China
19.Yeh*, M. K. and Hong, T. M., 2008, "Thermal Stress Analysis and Optimization of 3D Chip Module Using Through-Wafer Vias," Proceedings of the 4th Asia Pacific Conference on Transducers and Micro/Nano technologies, APCOT 4, June 22-25, Tainan, Taiwan, ROC, Paper No. 295
20.Yeh*, M. K. and Hung, T. M., 2007, "Thermal-Mechanical Analysis of a 3D System on Chip Module Using Through-Silicon Vias," Proceedings of the 31th National Conference on Theoretical and Applied Mechanics, December 21-22, Kaoshiung, Taiwan, ROC, Paper No. L04 (in Chinese)
21.Yeh*, M. K. and Lin, C. M., 2007, "Bending Test of Sandwich with Nanocomposites," Proceedings of the 24th National Conference on Mechanical Engineering, CSME, November 23-24, Chungli, Taiwan, ROC, Paper No. C02-001 (in Chinese)
22.Yeh*, M. K., Tai, N. H. and Chen, B. Y., 2007, “On the Accuracy of the Spring Constant of Atomic Force Microscopy Cantilevers,” The Seventh Annual Emerging Information & Technology Conference, Princeton, New Jersey, USA, August 9 –10, 2007
23.Yeh*, M. K. Chen, B. Y., and Lin, M. C., 2007, " Analysis and Experiment of Deformation and Limit Load of Thin-Walled Shell Cavities," The 7th International Conference on Fracture and Strength of Solids, FEOFS 2007, August 27-30, Urumqi, Xinjiang, China, Paper No. 284
24.Yeh*, M. K. and Chen, C. H., 2007, “Optimum Structural Design of Composite Xylophone Bars,”The 16th International Conference on Composite Materials, ICCM-16, July 8-13, 2007, Kyoto, Japan, Paper No. MoKA2-05
25.Yeh*, M. K., Tai, N. H. and Chen, B. Y., 2007, “Effect of Prestress on the Spring Constant of AFM Cantilever Made of Crystal Silicon,” International Conference on Nanoscience & Technology, June 4-6, 2007, Beijing, China, Paper NO. 1O-062
26.Yeh*, M. K., Tai, N. H. and Shen, W. S., 2007, “Microwave Enhancement of Mechanical Properties in MWNTs/Epoxy Nanocomposites,” International Conference on Nanoscience & Technology, June 4-6, 2007, Beijing, China, Paper NO. 1P-585
27.Yeh*, M. K., Tai, N. H. and Chen, B. Y., 2007, “Influence of Poisson’s Ratio Variation on Lateral Spring Constant of Atomic Force Microscopy Cantilevers,”International Scanning Probe Microscopy Conference, June 10-14, 2007, Jeju, Korea, Paper NO. OP 19
28.Yeh*, M. K. Su, T. F. and Lin, M. C., 2006, "Analysis and Experiment of Column Creep Buckling," Proceedings of the 30th National Conference on Theoretical and Applied Mechanics, December 15-16, Changhua, Taiwan, ROC, Paper No. 333 (in Chinese)
29.Yeh*, M. K. Chen, B. Y., and Lin, M. C., 2006, "Analysis and Experiment of Deformation Behavior of Synchrotron Radiation Superconducting Cavity," Proceedings of the 23th National Conference on Mechanical Engineering, CSME, November 24-25, Tainan, Taiwan, ROC, Paper No. C2-022 (in Chinese)
30.Yeh*, M. K. and Tung, K. C., 2005, "Dynamic Characteristics of Delaminated Composites Plates," Proceedings of the 29th National Conference on Theoretical and Applied Mechanics, December 16-17, Hsinchu, Taiwan, ROC, Paper No. E037 (in Chinese)
31.Yeh*, M. K. Chen B. Y., Tai, N. H. and Chiu, C. C., 2005, "Spring Constant Calibration of AFM Cantilever," Proceedings of the 29th National Conference on Theoretical and Applied Mechanics, December 16-17, Hsinchu, Taiwan, ROC, Paper No. N011
32.Yeh*, M. K. Jheng, J. R., Lin, M. C. and Wang, C. E., 2005, "Electromagnetic Characteristics and Mechanical Properties of a Circular Cavity Resonator," Proceedings of the 22th National Conference on Mechanical Engineering, CSME, November 25-26, Taoyuan, Taiwan, ROC, Paper No. C2-008 (in Chinese)
33.Yeh*, M. K. Chen, C.H., Hsieh, C. H., Yeh, K. L., Pern, C. M. and Bai, M. S., 2005, “Vibration Analysis of Composite Xylophonic Bars,” Proceedings of Taiwan ANSYS Conference, October 23-25, Hualien, Taiwan, ROC, pp. 4-43~4-49 (in Chinese)
34. Tai*, N. H., Yeh, M. K. and Lin, Y. J., 2005, “Investigation on the Mechanical Properties of the Hybrid Nanocomposites Reinforced by Carbon Nanotubes and Short Carbon Fibers”, Sixth International Conference on the Science and Application of Nanotubes, Chalmers Conference Centre, June 26-July 1, Göteborg, Sweden
35.Tai*, N. H., Yeh, M. K. and Lin, Y. J., 2005, “Studies on the Mechanical Properties of the Carbon Nanotube Reinforced Phenolic Composites,” Proceedings of Fifth International Conference on Composite Science & Technology, ICCST/5, Edited by A Al Tamimi et al., February 1-3, American University of Sharjah, Sharjah, United Arab Emirates, pp. 395-400
36.Yeh*, M. K., Tai, N. H. and Liu, J. H., 2005, "Mechanical Characterization of CNTs/Phenolic Composites," Proceedings of the 4th Australasian Congress on Applied Mechanics, Advances in Applied Mechanics, February 16-18, Melbourne, Australia, pp. 505-509 (NSC93-2212-E007-047)
SCI期刊論文
(以下含SCI 及EI期刊論文)
1.M. K. Yeh, and Y. Y. Lai, “Interfacial Property between Graphite/Epoxy Laminate and MWNTs/Polymer Nanocomposites,” Advanced Materials Research, Vols. 123-125, pp 133-136, 2010.
2.Yeh*, M. K., Tai, N. H. and Chen, B. Y., 2009, “Effects of anisotropic material property on the spring constant and the resonant frequency of atomic force microscope cantilever,”Review of Scientific Instruments, Vol. 80, No. 4, 043705-1~7
3.Yeh*, M. K. and Lin, C. M., 2009, “Bending Strength of Sandwich Beams with Nanocomposites Core,” Advanced Materials Research, Vols. 79-82 pp 577-580
4.Yeh MK and Hsieh TH, “Dynamic Properties of Sandwich Beams with MWNT/Polymer Nanocomposites as Core Materials,” Composites Science and Technology, Vol. 68, pp. 2930-2936, NOV 2008
5.Yeh MK, Tai NH and Chen BY, “Influence of Poisson’s Ratio Variation on Lateral Spring Constant of Atomic Force Microscopy Cantilevers,” Ultramicroscopy, Vol. 108, pp. 1025-1029, SEP 2008
6.Yeh MK, Huang YL ,“Thermal analysis and optimal design of lamp type light-emitting diodes,’’ JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS Vol. 31, Issue: 2, pp. 271-278, MAR 2008
7.Yeh MK, Hsieh TH, Tai NH, “Fabrication and mechanical properties of multi-walled carbon nanotubes/epoxy nanocomposites,” MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING Vol. 483, pp. 289-292, JUN 15 2008
9.Tai,* N.H., Yeh, M.K. and Peng, T.H., 2008, “Experimental Study and Theoretical Analysis on the Mechanical Properties of SWNTs/Phenolic Composites,”Composites Part B-Engineering, Vol. 39, pp. 926-932
10.Yeh*, M. K. Chen, B. Y., and Lin, M. C., 2008, "Analysis and Experiment of Deformation and Limit Load of Thin-Walled Shell Cavities," Advanced Materials Research, Vol. 33-37, pp.1207-1212
11.Yeh*, M. K. Tai, N. H., Ling, G. C. and Huang., C. Y., 2008, "Electromagnetic Shielding of Multi-walled Carbon Nanotube/Epoxy Nanocomposites," Advanced Materials Research, Vol.47-50, pp. 475-478
12.Yeh MK, Tai NH, Lin YJ, “Mechanical properties of phenolic-based nanocomposites reinforced by multi-walled carbon nanotubes and carbon fibers," COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING Vol. 39, Issue: 4, pp. 677-684, 2008
13.Lin MC, Wang C, Chang LH, Yeh MK, and Kao FS, “Effects of structural behavior on electromagnetic resonance frequency of a superconducting radio frequency cavity,” JOURNAL OF MECHANICS Vol. 23, Issue: 3 pp. 187-196, 2007
14.Chen BY, Yeh MK, and Tai NH, “Accuracy of the spring constant of atomic force microscopy cantilevers by finite element method,” ANALYTICAL CHEMISTRY Vol. 79 Issue: 4, pp. 1333-1338, 2007
15.Yeh, M. K., Tai, N. H. and Liu, J. H., 2006, “Mechanical Behavior of Phenolic-based Composites Reinforced with Multi-walled Carbon Nanotubes,” Carbon, Vol. 44, No. 1, pp. 1-9
16.Yeh, M. K., and Lee, I. S., 2006, “Delamination Growth in Ball Grid Array Electronic Package,” Key Engineering Materials, Vol. 306-308, pp. 363-368
17.Yeh, M. K., Tai, N. H. and Liu, J. H., 2006, “Dynamic Mechanical Properties of MWNTs/Phenolic Nanocomposites,” Key Engineering Materials, Vol. 306-308, pp.1073-1078
18.Yeh, M. K., Tai, N. H. and Lin, Y. J., 2006, “Fabrication and Mechanical Properties of MWNTs/Phenolic Nanocomposites,” Materials Science Forum, Vol. 505-507, pp. 121-126
19.Tai, N. H., Yeh, M. K., Liu, J. H. and Yang, C. H, 2006, “Fabrication and Characterization of Nanocomposites Reinforced by Carbon Nanotubes-(2)Testing of Mechanical Properties,” Key Engineering Materials, Vol. 313, pp. 1-6
20.Chiu, C. C., Tai , N. H., Yeh, M. K., Chen, B. Y., Tseng, S. H. and Chang, Y. H., 2006, “Tip-to-tip Growth of Aligned Single-walled Carbon Nanotubes under an Electric Field,” Journal of Crystal Growth, Vol. 290, pp. 171-175
京公网安备 11010802027423号