近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
期刊論文
J1. C.-Y. Huang, Y.-S. Hu, S.A Wan, and H. Nagai, 2020.03, “Application of pressure-sensitive paint for the characterization of mixing with various gases in T-type micromixers”, accepted for publication in International Journal of Heat and Mass Transfer
J2. C.-Y. Huang, J.-R. Lin, and T.-M. Liou, 2019.12, “Temperature-Sensitive Paint Applications in The Heat Transfer Analysis of 90° Elbow Microchannel Flow with Sharp and Curved Turns”, accepted for publication in Journal of Mechanics in press
J3. M. A. Fernández, J.-Y. Chang*, C.-Y. Huang, 2018.11, “Development of a Passive Magnetorheological Fluid Clutch with Field-Blocking Mechanism”, IEEE Transactions on Magnetics, Vol. 54, No. 11. 4601105.
J4. E. Binyet, C.-Y. Huang, J.-Y. Chang*, 2018.11, “Characterization of a vortex-induced vibrating thin plate energy harvester with particle image velocimetry” Microsystem Technologies, Vol. 24, Issue 11, pp4569-4576.
J5. M. A. Fernández, Y.-C. Chang, W.-T. Chen, K. Osowski, A. Olszak, A. Kesy, Z. Kesy, J. Y. Chang*, C. Y. Huang, 2018.07, “Introduction of viscotic clutches with adjustable output torque可調控輸出扭矩之黏滯型離合器簡介”, Journal of Industrial Mechatronics機械工業雜誌, vol. 424, pp. 27-32 (in Chinese)
J6. T. M. Liou*, S. W. Chang, C. Y. Huang, I. A. Lan, and S. P. Chan, 2018.06, “Influence of Rotating Directions on Hydro-Thermal Characteristics of a Two-Pass Parallelogram Channel With Detached Transverse Ribs” ASME Journal of Heat Transfer, Vol. 140 Issue 10, 102004 17 pages.
J7. K. Osowski, M. A. Fernández, A. Olszak, C. Y. Huang, A. Kesy, J. Y. Chang, Z. Kesy, 2018.03, “The Use of Modern Working Fluids in Robot Grippers,” Drives and Control, 3 (227), 2018, pp. 100-106 (in Polish)
J8. E. Binyet, C.-Y. Huang, J.-Y. Chang*, 2017.09, “Polymeric flexible plate in the wake of a bluff body for energy harvesting” Procedia Engineering, Vol. 199, pp. 1296-1301
J9. C.-Y. Huang*, S.-A. Wan, and Y.-H. Hu, 2017.08 “Oxygen and nitrogen gases mixing in T-type micromixers visualized and quantitatively characterized using pressure-sensitive paint”, International Journal of Heat and Mass Transfer, Vol. 111, pp.520-531
J10. C.-M. Liu, Y.-W. Wang, C.-K.-Sung*, and C.-Y. Huang, 2017.05 “The Feasibility Study of Regenerative Braking Applications in Air Hybrid Engine”, Energy Procedia, Vol 105, pp. 4242-4247
J11. S.-Y. Yang, C.-K. Sung*, and C.-Y. Huang, 2017.05, “Optimization of Power Management Strategy for Parallel Air-Fuel Hybrid System” Energy Procedia, Vol 105, pp. 530-536
J12. C.-Y. Huang*, B.-H. Huang, F.-R. Cheng, S.-W. Chen, and T.-M. Liou*, 2017.04 “Experimental study of heat transfer enhancement with segmented flow in a microchannel by using molecule-based temperature sensors”, International Journal of Heat and Mass Transfer. Vol. 107, pp.657-666
J13. C.-Y. Huang* and J.-S. Li, 2017.02 “Rarefaction Effect on Gas Flow in Microchannels with Various Aspect Ratios”, Journal of Mechanics. Vol. 33, No.1 pp.N1~N6,
J14. C.-M. Liu*, C.-L. Huang, C.-K. Sung and C.-Y. Huang, 2016.11 “Performance analysis of a two-stage expansion air engine”, Energy. Vol. 115, pp140-148
J15. C.-Y. Huang*, Y.-H. Chen S.-A. Wan, and Y.-C. Wang, 2016.08 “Quantitative Flow Visualization of Asymmetrical Flow in a Constricted Microchannel Gas Flow Using Pressure-Sensitive Paint”, 26 (2016) Journal of Micromechanics and Microengineering, 105002 doi:10.1088/0960-1317/26/10/105002.
J16. T. M. Liou*, S. W. Chang, C. -Y. Huang, S.-P. Chan and Y. A. Lan, 2016.02 “Particle Image Velocimetry and Infrared Thermography Measurements in a Two-pass 90-deg Ribbed Parallelogram Channel”, International Journal of Heat and Mass Transfer. Vol. 93, pp1175-1189.
J17. C.-M. Liu, J.-J. You, C.-K. Sung, and C.-Y. Huang*, 2015.10 “Modified intake and exhaust system for piston-type compressed air engines”, Energy, Vol. 90, pp516-524.
J18. C.-Y. Huang*, Y. Matsuda, J. Gregory, H. Nagai, and K. Asai 2015.05 “The Applications of Pressure-Sensitive Paint in Microfluidic Systems”, Microfluidics and Nanofluidics, Vol 18, pp 739-753, DOI 10.1007/s10404-014-1510-z,
J19. C.-Y. Huang*, T. G. Murthy, S. Chandrasekar, 2014.11 “Simultaneous measurements of thickness and temperature profile of the lubricant film at chip-tool interface during machining process using luminescent sensors,” (NSC 101-2221-E-007-057-MY3) Procedia Engineering, Vol 79, pp. 9-16
J20. J.-R. Lin, C.-M. Wu, T.-M. Liou and C.-Y. Huang*, 2014.11 “The study of axial heat conduction with various hydraulic diameters of microchannel,” (NSC 101-2221-E-007-057-MY3) Procedia Engineering Vol 79, pp. 273-278
J21. Y.-W. Wang, J.-J. You, C.-K. Sung, and C.-Y. Huang*, 2014.11 “The Applications of Piston Type Compressed Air Engines on Motor Vehicles,” (NSC 101-2221-E-007-107) Procedia Engineering Vol 79, pp. 61-65
J22. C.-Y. Huang*, C.-A. Li, B.-H. Huang and T.-M. Liou 2014.09 “The Study of Temperature Rise in a 90-Degree Sharp Bend Microchannel Flow under Constant Wall Temperature Condition”, Journal of Mechanics, Vol. 30 No. 06, pp 661-666,
J23. C.-Y. Yang, C.-Y. Yang, C.-K. Sung* and C.-Y. Huang, 2014.07 “Design of Slip Boundary Produced by Lotus Structure Applied to Hydrostatic Bearing”, Tribology Letters. Vol. 55, No. 1 pp. 55-64 (Featured in Journal of Technology, July 1st 2014: Studies from National Tsing Hua University Provide New Data on Tribology)
J24. T. G. Murthy, J. Madariaga, and C.-Y. Huang*, 2014.05 “Luminescent molecular sensors for assessment of temperature field in machining”, Tribology Letters Vol. 54, No.2, pp. 129-137 (NSC 101-2221-E-007-057-MY3)
J25. Y.-C. Liao, Y.-C. Li, Y.-C. Chang, C.-Y. Huang, and H.-H. Wei*, 2014.05 “Speeding up thermocapillary migration of a confined bubble by wall slip,” Journal of Fluid Mechanics, Vol. 746, pp 31-52
J26. C.-Y. Huang*, C.-M. Wu, Y.-N. Chen, T.-M. Liou*, 2014.03 “The experimental investigation of axial heat conduction effect on the heat transfer analysis in microchannel flow,” (NSC 101-2221-E-007-057-MY3) International Journal of Heat and Mass Transfer. Vol. 70, pp169-173
J27. C.-Y. Huang*, C.-K. Hu, C.-J. Yu and C.-K. Sung, 2013.03 “Experimental Investigation on the Performance of a Compressed-Air Driven Piston Engine,” Invited paper, Energies 6(3) 1731-1745 (NSC-101-3113-E-007-004)
J28. C.-Y. Huang*, C.-A. Li, H.-Y. Wang, and T.-M. Liou*, 2013.03 “The application of temperature-sensitive paints for surface and fluid temperature measurements in both thermal developing and fully developed regions of a microchannel,” 23(2013) Journal of Micromechanics and Microengineering 037001 doi:10.1088/0960-1317/23/3/037001 (NSC 101-2221-E-007-057-MY3)
J29. C.-Y. Huang*, C.-M. Lai, and J.-S. Li 2012.10, “Applications of pixel-by-pixel calibration method in microscale measurements with pressure-sensitive paint”, Journal of Microelectromechanical Systems, Vol. 21, Issue 5, pp1090-1097 (NSC99-2628-E-007-027 and NSC100-2221-E-007-107),
J30. C.-Y. Huang* and C.-M. Lai, 2012.06, “Pressure measurements with molecule-based pressure sensors in straight and constricted PDMS microchannels”, 22 (2012) Journal of Micromechanics and Microengineering, 065021 doi:10.1088/0960-1317/22/6/065021 (NSC99-2628-E-007-027 and NSC100-2221-E-007-107) (Selected for inclusion in Institute of Physics (IOP) Select and Journal of Micromechanics and Microengineering, 2012 highlights collection )
J31. H. Sakaue*, C.-Y. Huang, and J. Sullivan, 2011.07, “Optical hydrogen sensing method using temperature-sensitive luminophore on porous palladium”, Sensors and Actuators B: Chemical, Vol. 155, Issue 1, pp372-374
J32. H.-Y. Wang*, A. Bernarda, C.-Y. Huang, D.-J. Lee, and J.-S. Chang, 2011.01, “Micro-sized Microbial Fuel Cell: A Mini-Review”, Bioresource Technology, Vol. 102, Issue 1, pp. 235-243
J33. R. Calistes, S. Swaminathan, T. G. Murthy, C. Huang, C. Saldana, M. R. Shankar and S. Chandrasekar*, 2009.01, “Controlling Gradation of Surface Strains and Nanostructuring by Large Strain Machining,” Scripta Materialia, Vol. 60, Issue 1, pp.17-20
J34. T. G. Murthy*, C. Huang, M. R. Shankar, S. Chandrasekar, K. P. Trumble and J. P. Sullivan, 2008.06, “Temperature Field in Severe Plastic Deformation at Small Strain-Rates,” Materials Science Forum, Vol 584-586 pp.231-236
J35. C. Huang, T. G. Murthy, R. M’Saoubi, M. R. Shankar and S. Chandrasekar*, 2008.04, “Temperature Rise in Severe Plastic Deformation of Titanium at Small Strain-Rates,” Scripta Materialia, Vol. 58, No. 8, pp. 663-666
J36. T. G Murthy, C. Huang, and S. Chandrasekar*, 2008.04, “Characterization of Deformation Field in Plane Strain Indentation of Metals”, Journal of Physics D: Applied Physics, Vol. 41, No. 7, 074026 (8 pp) doi:10.1088/0022-3727/41/7/074026
J37. X. Guo*, C. Huang, A. Alexeenko and J. Sullivan, 2008.02, “Numerical and Experimental Study of Gas Flows in 2D and 3D Microchannels”, Journal of Micromechanics and Microengineering, Vol. 18, No. 2, 025034 (8 pp) doi:10.1088/0960-1317/18/2/025034 (Selected for inclusion in Institute of Physics (IOP) Select, and Journal of Micromechanics and Microengineering, 2008 highlights collection)
J38. C. Huang*, S. Lee, J. Sullivan, and S. Chandrasekar, 2007.07, “In Situ Measurement of Fluid Film Thickness in Machining”, Tribology Letters, Vol. 28, No.1, pp. 39-44 (Featured in Tribology & Lubrication Technology, Oct 2007: Cutting Edge: Monitoring the cutting edge?)
J39. C. Huang*, J. Gregory, and J. Sullivan, 2007.05, “A Modified Schlieren Technique for Micro Flow Visualization”, Measurement Science and Technology, Vol. 18, No. 5, pp. N32-N34
J40. C. Huang*, J. Gregory, and J. Sullivan, 2007.09, “Flow Visualization and Pressure Measurement in Micronozzle”, Journal of Visualization, Vol. 10, No. 3, pp. 281-288
J41. C. Huang*, J. Gregory, and J. Sullivan, 2007.08, “Microchannel Pressure Measurements Using Molecular Sensors”, Journal of Microelectromechanical Systems, Vol. 16, No. 4, pp.777-785
J42.F. B. Hsiao*, P. F. Liang, and C. Y. Huang, 1998.05, “High-Incidence Airfoil Aerodynamics Improvement by Leading-Edge Oscillating Flap”, Journal of Aircraft, Vol. 35 No. 3, pp. 508-510
研討會論文
IC1. C.-Y. Ye, Z.-C. Lin, C.-Y. Huang, 2019.11, “The Application of Pressure Sensitive Paints for Transonic Cavity Flow Measurements”, The Sixteenth International Conference on Flow Dynamics (ICFD2019), Sendai, Japan
IC2. Y.-F. Lin, C.-Y. Huang, 2019.11, “The Applications of Pressure Sensitive Paints on Transonic Convex-corner Flow Measurements”, The Sixteenth International Conference on Flow Dynamics (ICFD2019), Sendai, Japan
IC3. W.-T. Chen, C.-C. Yang, C.-Y. Huang, 2019.11, “Development and Investigation of Microchannel Force Sensor for Normal and Shear Force Measurements”, The Sixteenth International Conference on Flow Dynamics (ICFD2019), Sendai, Japan
IC4. M.-X. Chang, T.-Y. Tsai, T.-M. Liou, C.-Y. Huang, 2019.11, “Micro-PIV Measurements on flow field of inclined-angle structure microchannel with acoustic streaming”, The Sixteenth International Conference on Flow Dynamics (ICFD2019), Sendai, Japan
IC5. C.-Y. Hsiao, C.-Y. Ye, C.-Y. Huang, 2018.11, “Investigation of Supersonic Micro Flow”, The Fifteenth International Conference on Flow Dynamics (ICFD2018), Sendai, Japan
IC6. K.-L. Huang, M.-X. Chang, T.-M. Liou, C.-Y. Huang, 2018.11, “Experimental Study on Flow Field and Heat Transfer Analysis in Microchannel Flow with Acoustic Streaming and Staggered Structure” The Fifteenth International Conference on Flow Dynamics (ICFD2018), Sendai, Japan
IC7. Y.-C. Chang, W.-T. Chen, C.-Y. Huang, 2018.11 “The Development of Pressure Sensors with PDMS Microchannel Devices” The Fifteenth International Conference on Flow Dynamics (ICFD2018), Sendai, Japan
IC8. M.-X. Yan, Y.-C. Wang, C.-Y. Huang*, H. Nagai, 2018.11” Characterization of flow fields with different gases mixing in passive micromixers” The Eighteenth International Symposium on Advanced Fluid Information (AFI-2018), Sendai, Japan
IC9. C.-Y. Hsiao, M.-X. Yan, C.-Y. Huang*, 2018.10, “Design and characterization of micro supersonic wind tunnels with numerical simulation”, the 2nd International Conference on Mechanics (ICM) 2018, 12th Asian Computational Fluid Dynamics Conference (ACFD), the 25th National Computational Fluid Dynamics Conference (NCFD) and 4th Association of Computational Mechanics Taiwan Conference (ACMT), 2018 ICM2018/ACFD2018/ACMT/2018/25th NCFD, Yilan, Taiwan
IC10. T. M. Liou*, S. W. Chang, C. Y. Huang, I. A. Lan and S. P. Chan, 2018.06, “Influence of Rotating Directions on Hydro-Thermal Characteristics of a Two-Pass Parallelogram Channel with Detached Transverse Ribs”, ASME Turbo Expo 2018: Turbomachinery Technical Conference & Exposition, IGTI 2018, Lillestrøm (Oslo), Norway
IC11. M. A. Fernández, J.-Y. (James) Chang*, C.-Y. Huang, 2018.04, “Characterization of Output Torque of a Permanent Magnet-based MRF Clutch with a Field Blocking Mechanism”, Intermag 2018, Singapore, Singapore
IC12. C.-Y. Huang*, Y.-H. Hu, H. Nagai, 2017.10, “The Development and Applications of Pressure-Sensitive Paint on the Investigations of Gases Mixing in T-type Micromixers” The Seventeenth International Symposium on Advanced Fluid Information (AFI-2017), Sendai, Japan
IC13. F.-R. Chen, K.-L. Huang, C.-Y. Wang, T.-M. Liou, C.-Y. Huang*, 2017.10, “Experiment Study on Flow Field and Heat Transfer Analysis in Microchannel Flow Using Bubble-Induced Acoustic Streaming with Staggered Cavities and Membrane” The Fourteenth International Conference on Flow Dynamics (ICFD2017), Sendai, Japan
IC14. Y.-C. Chang, C.-Y. Huang*, C.-Y. Hsiao, Y.-S Hu, 2017.10, “The Development of Smart Fluid Tactile Sensors on Mechanical Grippers” The Fourteenth International Conference on Flow Dynamics (ICFD2017), Sendai, Japan
IC15. E. Binyet, J. Chang, C.-Y. Huang, 2017.09, “Polymeric flexible plate in the wake of a bluff body for energy harvesting”, X International Conference on Structural Dynamics, EURODYN 2017, Rome, Italy
IC16. C.-Y. Huang*. K.-C. Chiang, J.-R. Lin, S.-A. Wan, and T.-M. Liou, 2017.07, “The Development and Application of Optical-Chemical Sensors on Microfluidic Research”, Invited speaker, The 7th International Multidiscipline Conference on Optofluidics 2017, Singapore, Singapore.
IC17. C.-Y. Huang* and Y.-L. Sun, 2017.03, “Temperature and Velocity Analysis in a Recess Microchannel Flow for Microorganism Cultivation”, Invited speaker, 2017 EMN Meeting on Biomass, Energy and Materials, Auckland, New Zealand
IC18. Y.-C. Wang, Y.-S. Hu, and C.-Y. Huang*, 2016.10, “Mixing Effects of Oxygen and Nitrogen Gases in Micromixers with Boundary Obstructions” The Thirteenth International Conference on Flow Dynamics (ICFD2016), Sendai, Japan
IC19. Y.-X. Zhang, F.-R. Chen, T.-M. Liou, and C.-Y. Huang*, 2016.10, “TSP and PIV measurements on heat transfer enhancement with bubble-induced acoustic streaming”, The Thirteenth International Conference on Flow Dynamics (ICFD2016), Sendai, Japan
IC20. S.-Y. Yang, C.-K. Sung* and C.-Y. Huang, 2016.10, ” Optimization of Power Management Strategy for Parallel Air-Fuel Hybrid System” The 8th International Conference on Applied Energy – ICAE2016, Beijing, China
IC21. C.-M. Liu, Y.-W. Wang, C.-K. Sung* and C.-Y. Huang, 2016.10 “The Feasibility Study of Regenerative Braking Applications in Air-fuel Hybrid Engine” The 8th International Conference on Applied Energy – ICAE2016, Beijing, China
IC22. C.-Y. Huang*, Y.-T. Chen, C.-A. Li, C.-M. Wu, B.-H. Huang, and T.-M. Liou, 2015.10 “The Development and Applications of Temperature-Sensitive Paints in Microfluidic Systems: Current Status and Future Aspects” Invited paper, The Twelfth International Conference on Flow Dynamics (ICFD2015), Sendai, Japan
IC23. S.-A. Wan, Y.-C. Wang, and C.-Y. Huang*, 2015.10 “Mixing Effects of Oxygen and Nitrogen Gases in T-type Micromixers” The Twelfth International Conference on Flow Dynamics (ICFD2015), Sendai, Japan
IC24. J.-R. Lin, Y.-X. Zheng, T.-M. Liou and C.-Y. Huang*, 2015.10 “The Investigation of Flow Field and Heat Transfer in 90 deg Bend Microchannels Using Micro Particle Image Velocimetry and Temperature-Sensitive Paint” Twelfth International Conference on Flow Dynamics (ICFD2015), Sendai, Japan
IC25. K.-C. Chiang, Y.-L. Sun, C.-Y. Huang*, H.-Y. Wang, 2015.10 “The study of 90 degree elbow microchannel gas flow using pressure-sensitive paint” Twelfth International Conference on Flow Dynamics (ICFD2015), Sendai, Japan
IC26. B. Emmanuel*, C.-Y. Huang, J.-Y. (James) Chang, 2015.10 “Building Integrated Vortex Induced Vibration Harvesters”, 1st Association of Computational Mechanics Taiwan (ACMT) Conference, Taipei
IC27. H.-C. Chen, H.-H. Wei and C.-Y. Huang, 2015.07 “The Experimental Study of Thermocapillary Migration in Cylinder Tubes with Temperature-Sensitive Paint”, the 5th International Conference on Optofluidics 2015, Taipei, Taiwan
IC28. B.-H, Huang, T.-M. Liou, and C.-Y. Huang, 2014.11 “Heat Transfer Analysis of Serpentine Microchannel Flow Using Micro Particle Image Velocimetry and Temperature-Sensitive Paint”, The 9th Cross-straits Conference on Aeronautics and Astronautics, New Taipei City, Taiwan
IC29. Y.-N. Chen, H.-C. Chen, Y.-T. Chen, T.-M. Liou and C.-Y. Huang, 2014.10 “The Development of Simultaneous Measurements of Velocity and Temperature in Microchannel Flow”, Eleventh International Conference on Flow Dynamics (ICFD2014), Sendai, Japan
IC30. J.-S. Lee, S.-A. Wan, F.-H. Cho, H.-Y. Wang, and C.-Y. Huang, 2014.10 “The Study of Pressure Distribution in Microchannel Flow for Gas-MEMS Applications”, Eleventh International Conference on Flow Dynamics (ICFD2014), Sendai, Japan
IC31. T. M. Liou, S. W. Chang, C. Y. Huang and Y. A. Lan, 2014.06 “Infrared Thermography Study on Heat Transfer of a Rotating Parallelogram Two-Pass Square Channel with Transverse Ribs”, 16th International Symposium on Flow Visualization, Okinawa, Japan
IC32. Y.-H. Chen and C.-Y. Huang, 2014.05 “The Applications of Pressure/Temperature Sensitive Paint on Microfluidics”, Invited paper, Advances in Microfluidics & Nanofluidics 2014, Taipei, Taiwan
IC33. 黃智永,陳瑩璇 2013.12, “微分子壓力量測技術於微尺度非對稱流場實驗應用”, The 1st Bilateral Fluid Mechanics Conference (第一屆兩岸流體力學研討會), Hsinchu, Taiwan
IC34. Y.-N. Chen, J.-R. Lin, B.-H. Huang, T.-M. Liou and C.-Y. Huang, 2013.11 “The Investigation of Heat Transfer Enhancement in Segmented Microchannel Flow Using Micro-PIV and TSP Techniques”, Tenth International Conference on Flow Dynamics (ICFD2013), Sendai, Japan
IC35. K.-C. Chiang, Y.-W. Wang, Y.-H. Chen, H.-Y. Wang, and C.-Y. Huang, 2013.11 “The Study of Asymmetric Flows in Constricted Microchannel with PSP Technique”, Tenth International Conference on Flow Dynamics (ICFD2013), Sendai, Japan
IC36. C.-Y. Yang, C.-Y. Yang, C.-K. Sung* and C.-Y. Huang, 2013.11 “Design of Slip Boundary Produced by Lotus Structure Applied to Hydrostatic Bearing”, The 5th International Conference of Asian Society for Precision Engineering and Nanotechnology, Taipei, Taiwan
IC37. C.-Y. Huang*, T. Murthy, S. Chandrasekar, 2013.11 “Simultaneous measurements of thickness and temperature profile of the lubricant film at chip-tool interface during machining process using luminescent sensors” Invited paper, 37th National Conference on Theoretical and Applied Mechanics (37th NCTAM 2013) & The 1st International Conference on Mechanics (1st ICM), Hsinchu, Taiwan, inclusion in Procedia Engineering
IC38. H.-H. Wei*, and C.-Y. Huang, 2013.11 “On the hydrodynamics of jellyfish-inspired swimming” 37th National Conference on Theoretical and Applied Mechanics (37th NCTAM 2013) & The 1st International Conference on Mechanics (1st ICM), Hsinchu, Taiwan
IC39. J.-R. Lin, C.-M. Wu, T.-M. Liou and C.-Y. Huang*, 2013.11 “The study of axial heat conduction with various hydraulic diameters of microchannel” 37th National Conference on Theoretical and Applied Mechanics (37th NCTAM 2013) & The 1st International Conference on Mechanics (1st ICM), Hsinchu, Taiwan, inclusion in Procedia Engineering
IC40. Y.-W. Wang, C.-J. You, C.-K. Sung, and C.-Y. Huang*, 2013.11 “The Applications of Piston Type Compressed Air Engines on Motor Vehicles” 37th National Conference on Theoretical and Applied Mechanics (37th NCTAM 2013) & The 1st International Conference on Mechanics (1st ICM), Hsinchu, Taiwan, inclusion in Procedia Engineering
IC41. H.-W. D. Chiang, S.-W. Hsu, and C.-Y. Huang, 2013.10 ” Performance Analysis and Optimization of a Transcritical ORC System”, 2nd International Seminar on ORC Power Systems ASMEORC 2013, Rotterdam, The Netherlands
IC42. Y.-H. Chen, C.-M. Lai, J.-S. Li and C.-Y. Huang, 2013.05 ” The Investigation of Constricted Microchannel Flow with Molecule-Based Pressure Sensor and Simulation”, 12th Asian Symposium on Visualization, Tainan, Taiwan
IC43. B.-H. Huang, C.-A. Li, C.-M. Wu, T.-M. Liou and C.-Y. Huang, 2013.05 ” The Study of Optical Depth Effect in Molecule-based Temperature Sensor Measurements”, 12th Asian Symposium on Visualization, Tainan, Taiwan
IC44. Y.-Y. Chen, J.-Y. Su, C.-Y. Huang and H.-Y. Wang, 2012.10 “Microfluidic Microbial Fuel Cells for Rapid Screening of Electroactive Microorganisms”, the 16th International Conference on Miniaturized Systems for Chemistry and Life Sciences (Micro TAS 2012), Okinawa, Japan (NSC 101-2221-E007-057-MY3)
IC45. C.-M. Lai and C.-Y. Huang, 2012.09 ” The Development of Molecule-based Pressure/Temperature Sensors in Microfluidic Research”, The 8th Cross-straits Conference on Aeronautics and Astronautics, Beijing, China
IC46. C.-Y. Huang, T.-M. Liou, C.-A. Li, and M.-W. Wang, 2012.06 ” Temperature and velocity measurement in 90 degree bend microchannel flow”, 15th International Symposium on Flow Visualization, Minsk, Belarus
IC47. C.-Y. Huang, T.-M. Liou, C.-A. Li, and C.-M. Wu, 2012.06 ” Heat transfer analysis with molecule-based temperature measurements in straight PDMS microchannel flow” poster session, The International Symposium on Microchemistry and Microsystems (ISMM 2012), Hsinchu, Taiwan
IC48. C.-Y. Huang, C.-K. Sung, and C.-A. Lin, 2012.03, “Current Status and future applications of compressed air driven engine in National Tsing Hua University”, Invited paper. 2012 International Workshop on Compressed Air Driven Engines, Hsinchu, Taiwan
IC49. C.-Y. Huang, C.-M. Lai, J.-S. Li, 2011.11, “Calibration Method of Molecule Based Pressure Sensor Technique in Microfluidic Measurements”, 8th International Conference on Flow Dynamics, Sendai, Japan
IC50. C.-Y. Huang, C.-M. Lai, H.-Y. Wang, 2011.11, “Pressure Measurement with Molecule Based Pressure Sensor in Constricted PDMS Microchannels”, 8th International Conference on Flow Dynamics, Sendai, Japan
IC51. C.-Y. Huang and S.-C. Su, 2011.10, “The Investigation of Solar Stirling Engine Performance and the Feasibility Study of Integrating Compressed Air Energy for Green Energy Applications”, Invited paper. Low Carbon Earth Summit (LCES-2011), Dalian, China
IC52. Z.-M. Chen, C.-Y. Huang, and H.-Y. Wang, 2011.06, “Visualization of mixing of microalgae and its labeling reagents inside microdroplets for oil content detection”, poster sessions, ASV-po-09, 11th Asian Symposium on Visualization, Niigata, Japan
IC53. C.-Y. Huang, C.-M. Lai, C.-A. Li, and T.-M. Liou, 2011.06, “Investigation of Flow Separation inside Micro Devices”, poster sessions, ASV-po-05, 11th Asian Symposium on Visualization, Niigata, Japan
IC54. C.-Y. Huang, C.-A. Li, and C.-M. Lai, 2011.06 ”Experimental Investigation of Utilizing Molecule Based Pressure and Temperature Sensors in MEMS research” poster session, The International Symposium on Microchemistry and Microsystems (ISMM 2011), Seoul, Korea
IC55. Y.M. Hung, C.Y. Huang, T.H. Lu and C.K. Sung, 2010.11, “Observation of Imprinting Process using Particle Image Velocimetry”, poster presentation, 23rd International Microprocesses and Nanotechnology Conference, Fukuoka, Japan
IC56. C.-Y. Huang, J. Gregory, H. Nagai, K. Asai and J. Sullivan, 2010.05, “Molecular Based Pressure and Temperature Sensors in Microfluidic Measurement”, PSP & TSP workshop ‘2010, Beijing, China
IC57. J. Sullivan, T. Liu, H. Sakaue, J. Crafton, J. Gregory and C.-Y. Huang, 2010.05, “State of the Art of Pressure and Temperature Sensitive Paint”, PSP & TSP workshop ‘2010, Beijing, China
IC58. C.-Y. Huang, S. Chandrasekar, and J. Sullivan, 2009.11, “Advanced Experimental Methods in Multidisciplinary Engineering Research”, The 7th Pacific Symposium on Flow Visualization and Image Processing, Kaohsiung, Taiwan
IC59. C.-Y. Huang, S. Chandrasekar, and J. Sullivan, 2009.11, “Luminescent Molecular Sensors for Assessment of Temperature and Lubrication in Machining Processes”, Invited paper, Sixth International Conference on Flow Dynamics, Sendai, Japan
IC60. Y.-M. Hung, C.-Y. Huang and C.-K. Sung, 2009.11, “A Study of Micro Flow Visualization in Imprinting Process”, poster session, Sixth International Conference on Flow Dynamics, Sendai, Japan
IC61. E. Gnanamanickam, C. Huang, T. Murthy, S. Chandrasekar, and J. P. Sullivan, 2009.05, “In Situ Measurement of Deformation and Temperature in Machining”, the 12th CIRP Conference on Modeling of Machining Operations, San Sebastian, Spain
IC62. J B. Mann, C. Saldana, W. Moscodo, T G. Murthy, C. Huang, S. Swaminathan, B C. Rao, M R. Shankar, W D. Compton, K P. Trumble and S. Chandrasekar, 2008.12, “Unusual Applications of Machining”, Proceedings of the 2nd International and 23rd All India Manufacturing Technology, Design and Research Conference, v. 1, p.47-55, Chennai, India
IC63. C. Saldana, M. Ravi Shankar, T. G. Murthy, C. Huang, E. Gnanamanickam, and S. Chandrasekar, 2008.09, “Zener-Hollomon Parameter and Microstructure Prediction in Machining“, Proceedings of the 11th CIRP Conference on Modeling of Machining, Gaithersburg, MD
IC64. C. Huang, J. Gregory and J. Sullivan, 2008.08, “Pressure and Temperature Measurements of Supersonic Microjet Impingement”, paper 11923, the XXII International Congress of Theoretical and Applied Mechanics, Adelaide, Australia
IC65. X. Guo, C. Huang, A. Alexeenko and J. Sullivan, 2008.06, “Modeling and Preliminary Experiment for Rarefied Gas Flows in Constricted Microchannels”, ICNMM2008-62287, Proceedings of the ASME 6th International ASME Conference on Nanochannels, Microchannels & Minichannels, Technische Universitaet of Darmstadt, Darmstadt, Germany
IC66. T. Murthy, C. Huang, and S. Chandrasekar, 2008.06, “Experimental Investigations of Deformation Fields in Plane Strain Indentation”, 11th International Congress and Exhibition on Experimental and Applied Mechanics 2008, v 3, p 1468-1472, Orlando, FL
IC67. T. Murthy, C. Huang, and S. Chandrasekar, 2008.03, “Direct Estimation of Strain Gradient Maps in Plane Strain Indentation”, poster presentation, American Physical Society March Meeting, New Orleans, LO
IC68. C. Huang, S. Lee, J. Hwang, J. Sullivan, and S. Chandrasekar, 2007.08, “Micro-Scale Characterization of Fluid Action in Machining”, Proceedings of 10th CIRP International Workshop on Modeling of Machining Operations, Reggio Calabria, Italy
IC69. T. Murthy, C. Huang, J. Sullivan, and S. Chandrasekar, 2007.07, “Strain Field in Indentation of Metals”, poster presentation, Third International Indentation Workshop, Cambridge, UK
IC70. X. Guo, C. Huang, A. Alexeenko and J. Sullivan, 2007.06, “Numerical and Experimental Study of Gas Flows in 2D and 3D Microchannels”, ICNMM2007-30178, Proceedings of the ASME 5th International Conference on Nanochannels, Microchannels & Minichannels, p 393-400, Universidad De Las Americas Puebla, Mexico
IC71. T. Murthy, C. Huang, J. Sullivan, and S. Chandrasekar, 2007.06, “Direct Observation of Deformation Field in Plane Strain Indentation”, Proceedings of the SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2007, v 2, p 817-823, Springfield, MA
IC72. C. Huang , J. Gregory, H. Nagai, K. Asai, and J. Sullivan, 2006.11, “Molecular Sensors in Microturbine Measurement”, IMECE2006-13814, Proceedings of IMECE 2006, ASME International Mechanical Engineering Congress & Exposition, p 577-583, Chicago, IL
IC73. C. Huang and J. Sullivan, 2005.08, “PSP Measurement in Microchannel Flow”, 21st International Congress on Instrumentation in Aerospace Simulation Facilities, ICIASF'05 Record, p 226-233, Sendai, Japan
IC74. C. Huang and J. Sullivan, 2004.08, “Flow Visualization and Pressure Measurement in Micronozzles”, International Symposium on Flow Visualization 2004, Notre Dame, IN
IC75. J. Sullivan, J. Gregory, C.-Y. Huang, and H. Sakaue, 2002.08, “Flow Visualization Application of Luminescent Paint”, International Symposium on Flow Visualization 2002, Kyoto, Japan,
IC76. S. Matsumura, C.-Y. Huang, Y.-S. Choi, E. Swanson, T. Salyer, H. Sakaue, 2002.06, “Feasibility of Detecting Streamwise Vortices from Roughness Element Using Temperature Sensitive Paint in a Mach 4 Ludwieg Tube”, AIAA-2002-3238, 22nd AIAA Aerodynamic Measurement Technology and Ground Testing Conference, St. Louis, MO ( 1st place GTTC Design Competition)
IC77. C. Huang, H. Sakaue, J. Gregory, and J. Sullivan, 2002.01, “Molecular Sensors for MEMS”, AIAA-2002-0256, 40th Aerospace Sciences Meeting & Exhibit, Reno, NV (Featured in Pressure and Temperature Sensitive Paints, Chapter 9, 2005, Springer)
國內研討會論文
DC1. 葉承彥, 林筠芳, 黃智永, 2019.12, “快速反應壓力螢光感測塗料之開發與特性量測”, poster presentation 中國機械工程學會第三十六屆全國學術研討會, 台北, 國立臺灣師範大學
DC2. 金正皓, 胡政綱, 黃智永, 2012.12, “The Study of Regenerative Braking in Air Engine Applications”, oral presentation,中國機械工程學會第二十九屆全國學術研討會, 高雄, 國立中山大學
DC3. 黃智永, 劉通敏, 黎振安, 吳政旻, 黃柏翰, 2012.11, “溫度感應微分子量測技術的開發”, Poster presentation中華民國力學學會第三十六屆全國力學會議, 中壢, 國立中央大學)
DC4. 黃智永, 宋震國, 胡政綱, 游智傑, 樊毓芬, 2012.11, “活塞式氣動引擎的研究”, Poster presentation中華民國力學學會第三十六屆全國力學會議, 中壢, 國立中央大學
DC5. 黃智永, 劉通敏, 蘇淑君, 謝惠安, 林智仁, 2012.11, “中型Beta-type史特靈引擎製造與量測分析”, Poster presentation中華民國力學學會第三十六屆全國力學會議, 中壢, 國立中央大學
DC6. 黃智永, 劉通敏, 蘇淑君, 王源煒, 陳穎農, 2012.11, “Beta-type史特靈引擎內部流場量測與分析”, Poster presentation中華民國力學學會第三十六屆全國力學會議, 中壢, 國立中央大學
DC7. 黃智永, 李佳烜, 陳瑩璇, 2012.11, “開發壓力感測螢光分子於高紐森數流場之應用”, Poster presentation中華民國力學學會第三十六屆全國力學會議, 中壢, 國立中央大學
DC8. C. K. Hu, S. S. Liu, C. Y. Huang, Y. F. Fan, C. K. Sung, C .A. Lin, 2011.12, “The Investigation of Split-cycle Air Engine”, Poster presentation中國機械工程學會第二十八屆全國學術研討會, 台中, 國立中興大學)
DC9. C. Y. Huang, S. C. SU and W. K.Tseng, 2011.12, The investigation of stirling engine performance in compressed air energy applications” Poster presentation中國機械工程學會第二十八屆全國學術研討會, 台中, 國立中興大學
DC10. C.-Y. Huang, T.-M. Liou, C.-A. Li and C.-M. Lai, 2011.03, “The Investigation of Flow Separation in Constricted and 90 Degree Bend PDMS Microchannels with Micro-PIV Technique”, 第二十一屆燃燒與能源學術研討會, 雲林, 國立虎尾科技大學
DC11. C.-Y. Huang, T.-M. Liou, C.-M. Lai and C.-A. Li, 2010.12, “Micro-PIV study on entrance region and fully developed slip length in PDMS microchannel”, 中國機械工程學會第二十七屆全國學術研討會, 台北, 國立台北科技大學
DC12. F.-M. Fang, J.-Y. Li, L.-J. Tseng, C.-Y. Huang, 2010.11, “The Preliminary Study of Mechanical Jellyfish”, Poster presentation, 第三十四屆力學研討會, 雲林, 國立雲林科技大學
DC13. L.-J. Tseng, Y.-T. Hsu, C.-Y. Huang, 2010.11, “The experimental investigation of jellyfish movement”, 第三十四屆力學研討會, 雲林, 國立雲林科技大學
京公网安备 11010802027423号