近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
研討會論文
1.Hocheng, H. and Chen, C.M., 2013, Plenary Lecture: “Mechanical Design of Electrical Routing on Stretchable Substrate”, 9th WSEAS International Conference on Applied and Theoretical Mechanics (MECHANICS), Dubrovnik, Croatia.
2.Wu, Y.C., Tsai, H.Y., Huang, C.J. and Hocheng, H., 2012, “An Innovative Time-Saving Study on Tracking Sleeping Statuses of Drosophilae”, International Conference on Signal Processing, Pattern Recognition and Applications (SPPRA), Greece.
3.Hocheng, H., Chang, J., Hsu, H., Han, H. and Chang, Y., 2012, “Metal Removal by Acidithiobacillus ferrooxidans through Cells and Extra-cellular Culture Supernatant in Biomachining”, General Assembly of CIRP, Hong Kong.
4.Jadhav, U.U. and Hocheng, H., 2012, “Metal Reclaim From Battery Waste Using Ferric Sulfate”, International Conference on Advanced Materials Processing Technologies (AMPT), Woolongong, Australia.
5.Hocheng, H., Hsu, W.S. and Shy, J.T., 2012, “A method for Estimating Residual Layer Thickness in Nano-imprint Lithography”, 38th International Conference on Micro and Nano Engineering, Toulouse, France.
6.Hocheng, H., Hsu, W.S. and Shy, J.T., 2012, “Surface Plasmon Resonance as an Innovative Method for Defects Monitoring in Nanoimprint Lithography”, 7th International Conference on Surfaces, Coatings and Nanostructured Materials (NANOSMAT), Prague, Czech.
7.Hocheng, H., Hsu, W.H. and Nien, C.C., 2011, Special Invited Speech, “Process Monitoring for Nanoimprint Lithography”, IEEE International Conference on NEMS, Taiwan.
8.Hocheng, H., 2011, Keynote Lecture, “Delamination in Drilling of Composite Materials: Cause and Remedy”, 6th Conference on Manufacturing Engineering, Brazilian Association for Mechanical Engineering and Science, Brazil.
9.Hocheng, H., Lin, T.C. and Jaghav, U.U., 2011, “Biological Laser-Assisted Micropattern Deposition”, Cross-Strait Conference on Manufacturing Technology, China.
10.Chou, T.H., Huang, T.Y., Ting, C.J., Hocheng H., Tsai, J.-H. and Wu, T.-C., 2011, “Design and Fabrication of Sunlight Guide Plate Integrated IR Insulation Layer”, International Conference on Materials for Advanced Technologies, Singapore.
11.Hung, J.N., Sato, K. and Hocheng, H., 2010, "Torsion Fatigue of Polysilicon Microbridge Structure", International Microprocesses and Nanotechnology Conference, Japan.
12.Chou, T.H., Yang, W.H., Huang, Z.Y. and Hocheng, H., 2010, “Roll-to-roll Embossing of Sunlight Guide Film with Wide Outgoing Angle”, ISMQC, Japan.
13.Hocheng, H., and Hsu, W.S., 2010, "An Innovative Monitoring of Residual Layer Thickness and Uniformity in Nanoimprint", IEEE International Conference on INEC, Hong Kong.
14.Hocheng, H., Wong, W.S. and Chang, J.H., 2010, "Design and Fabrication of Cantilever Beam for Biosensing", Cross-strait Advanced Manufacturing Technologies Workshop, Taiwan.
15.Hocheng, H. and Wang, K.Y., 2010, "Micropattern Fabrication by Masked Excimer Laser Dragging ", Plenary Lecture in 10th WSEAS Int. Conference on Robotics, Control and Manufacturing Technology (ROCOM'10), China.
16.Hocheng, H., Chang, K.E., Chang, J.H. and Wang, J.C., 2010, "Analysis of Laser-Activated Deposition of Copper Lines using Microbe Metabolite", International Conference on Advanced Manufacturing (ICAM), Taiwan.
17.Hocheng, H., Hsu, W.H. and Shy, J.T., 2010, "A Method for Estimating Bubble Defect in Nanoimprint Lithography", International Microprocesses and Nanotechnology Conference, Japan.
18.Hocheng, H., Hsu, W.H. and Nien, C.C., 2010, "Advanced Monitoring for Nanoimprint Lithography", International Conference on Advanced Materials and Processing Technologies, France.
19.Hocheng, H., Huang, Z.Y., Chou, T.H. and Yang, W.H., 2010, Awardee’s Lecture , “A Brighter Place: An Overview of Micropatterened Sunlight Guide", Medal of Anniversary of Materials Science and Engineering in Silesia at the 16th International Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, also in Journal of Achievements in Materials and Manufacturing Engineering in memory of the late Prof. J. Adams, Poland.
20.Hocheng, H., and Hsu, W.S., 2009, ""In-situ Monitoring of Residual Layer Thickness in Nanoimprint Lithography", Frontiers in Polymer Science -- International Symposium Celebrating the 50th Anniversary of the Journal Polymer, Germany.
21.Wen, T.T. and Hocheng, H., 2009, “Electromagnetic Force-assisted Imprinting Technology of Submicron-Line Pattern”, 2nd Asian Symposium on Nanoimprint Lithography, Taiwan.
22.Hocheng, H., Chen, C.M. Chen, R. and Fang, W.L., 2009, “Composition of Wireless Sensing Device for Human and Homecare Network”, Proc. International Conference on Biomedical Electronics and Informatics, pp.193-198, Romania/Russia. (selected paper for ISI-indexed publication)
23.Wen, T.T. and Hocheng, H., 2009, “Imprint of Microlens Arrays Assisted by Electromagnetic Force”, World Congress on Materials and Manufacturing Engineering and Technology, Poland.
24.Mai, C. and Hocheng, H., 2009, "Improvement of Surface Roughness and Efficiency in Electrical-Discharge Machining assisted by adding Carbon Nanotube to Dielectric Fluid", International Meeting on Materials, Processes and Applications of Nanotechnology, United Kingdom.
25.Hocheng, H., Hsu, W.S. and Shy, J.T., 2009, "In-Situ Monitoring of Pattern Filling in Nano-imprint Lithography using Surface Plasmon Resonance", International Meeting on Materials, Processes and Applications of Nanotechnology, United Kingdom.
26.Hocheng, H., Chang, J.H. and Wung, W.S., 2009, “Geometric Optimization of Cantilever Beam in Bio-sensing”, Proc. International Workshop on Nanomechanical Cantilever Sensors, Korea.
27.Huang, Z.Y., Chou, T.H., Yang, W.H., Cheng, K.Y. and Hocheng, H., 2009, “Microimprint of Solar-Efficient Guide Panel of Inorganic-Organic Hybrid Material”, Proc. Advances in Materials and Processing Technology, Malaysia.
28.Chan, C.K., Hsu, C.P., Wu, M.C., Hocheng, H., Chen, R.S. and Fang, W.L., 2009, “A Novel Differential Capacitive-Sensing Dual-Axis Accelerometer Design Using Pendulum- Proofmass, Gimbal-Springs and Harm Vertical Combs”, Proc. TRANSDUCERS - 15th International Conference on Solid-State Sensors, Actuators and Microsystems , art. no. 5285670, pp. 1944-1947, USA.
29.Chan, C.K, Hsu, C.P., Wu, M.C., Hocheng, H., Chen, R.S., Fang, W., 2009, A Novel Differential Capacitive-sensing Dual-axis Accelerometer Design using Pendulum-proofmass, Gimbal-springs, and Harm Vertical-combs, TRANSDUCERS - 15th International Conference on Solid-State Sensors, Actuators and Microsystems, pp.1944-1947, Taiwan.
30.Lau, Y.-D., Chen, R., Hocheng, H., Fang, W., 2009, “A Novel Micro Tensile Testing Instrument with Replaceable Testing Specimen of Gold and Aluminum by Parylene Passivation Technique”, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering, pp. 743-747, USA.
31.Wen, T.T. and Hocheng, H., 2009, “Rapid Fabrication of Submicron Magnetic Line using Electromagnetic Force-assisted UV-imprinting”, International Conference on Nanoimprint and Nanoprint Technology, USA.
SCI期刊論文
1.Hocheng, H., Tsai, H.Y., Umesh, J., Wang, K.Y. and Lin, T,C,, 2014, “Laser Surface Patterning”, a chapter in Comprehensive Materials Processing: Laser Processing and Laser Surface Treatment, Ed. B.S. Yilbas, Elsevier. (in press)
2.Hocheng, H. and Hsu, W.H., 2013, “Process Monitoring for Nanoimprint Lithography”, a chapter in Advances in Electrical Engineering, Ed. F. Columbus, Nova Science (in press)
3.Hocheng, H., Lin, T.C., Jadhav, U.U. and Wong, W.S., 2013, “Writing Metal on SiO2 by Laser through Culture Supernatant of Acidithiobacillus Ferrooxidans 13820”, Microelectronic Engineering, Vol.101, pp.17-22.
4.Jadhav, U.U. and Hocheng, H., 2013, “Extraction of Silver from Spent Silver Oxide-Zinc Button Cells by Acidithiobacillus Ferrooxidans Culture Supernatant”, International Journal of Cleaner Production. Vol.44, pp.39-44.
5.Hocheng, Jadhav, U.U. and Chang, J.H., 2013, “Innovative Use of Biologically Produced Ferric Sulfate for Machining of Copper Metal and Study of Specific Metal Removal Rate and Surface Roughness during Process”, Journal of Materials Processing Technology, Vol.213, pp.1509-1515.
6.Hocheng, H., Hsu, W.H. and Shy, J.T., 2013, “A Method for In-Situ Measurement of Residual Layer Thickness in Nanoimprint Lithography”, Microelectronic Engineering. (in press)
7.Hocheng, H., Hsu, W.H. and Shy, J.T., 2013, “Surface Plasmon Resonance as an Innovative Method for Filling Defects Monitoring in Nanoimprint Lithography“, Applied Surface Science. (in press)
8.Hocheng, H. and Tsai, H.Y., 2013, Advanced Analysis of Nontraditional Machining, a book of Springer, New York, ISBN 978-1-4614-4053-6, 500 pages.
9.Huang, T.Y., Hocheng, H., Chou, T.H., Yang, W.H., 2013, “Bring Free Light to Buildings: Overview of Daylighting System”, a chapter in Energy Book Series - Volume 1: Materials and Processes for Energy, Formatex, Spain. (in press)
10.Hocheng, H., 2012, Machining Technology of Composite Materials: Principles and Practice, a book of Woodhead Publishing, Cambridge, ISBN 978-0-8570-9030-0 /0857090305, 488 pages.
11.Mai, C.C., Hocheng, H. and Huang, S., 2012, "Advantages of Carbon Nanotubes in Electrical-Discharge Machining", International Journal of Advanced Manufacturing Technology, Vol. 59, No. 1, pp. 111-117.
12.Hocheng, H., Chang, J.H. and Jadhav, U.U., 2012, “Machining of Various Metals by Acidithiobacillus ferrooxidans 13820 Culture Supernatant”, International Journal of Cleaner Production, Vol. 20, pp.180-185.
13.Hocheng, H., Chang, K.E. and Chang, J.H., 2012, "Threshold of Laser-Activated Writing of Metal using Microbe Metabolite ", International Journal of Machine Tools & Manufacture, pp.51-57.
14.Hocheng, H., Wong, W.S. and Chang, J.H, 2012, "Shape Effects of Micromechanical Cantilever Biosensor", Measurements:Journal of the International Measurement Confederation, pp.2081-2088.
15.Hocheng, H., Chang, J., Hsu, H., Han, H. and Chang, Y., 2012, “Metal Removal by Acidithiobacillus ferrooxidans through Cells and Extra-cellular Culture Supernatant in Biomachining”, CIRP Journal of Manufacturing Science and Technology, Vol.5, No.2, pp.137-141.
16.Guu, Y.H., Mai, C.C. and Hocheng, H., 2012, "Applications of Carbon Nanotubes in Nontraditional Machining and Microscopy", a chapter in Carbon Nanotubes: Synthesis, Properties and Applications, Nova Science, USA, ISBN 978-1-4614-4053-6.
17.Jadhav, U.U. and Hocheng, H., 2012, “A Review of Recovery of Metals from Industrial Waste ", a review paper in Special Issue of Journal of Achievements in Materials and Manufacturing Engineering celebrating the 65th birthday of Prof. L.A. Dobrzanski, Vol.54, 00.159-167.
18.Hocheng, H., Jadhav, U.U. and Chang, J.H., 2012, “Biomachining Rates of Various Metals by Acidithiobacillus Thiooxidans”, International Journal of Surface Sciences and Engineering, Vol. 6, pp.101-111.
19.Hocheng, H., Chang, J.H. and Umesh, J., 2012, "Biomachining -- Acidithiobacillus Genus-Based Metal Removal", a chapter in Micromanufacturing Processes, pp. 99-112, Ed. V.K. Jain, CRC Press, USA.
20.Hocheng, H. and Tsao, C.C., 2012, "Micromechanisms of Delamination in Composite Materials Induced by Drilling", a chapter in the Encyclopedia of Composites, 2nd Ed., L. Nicolais and A. Borzacchiello, John Wiley & Sons, USA, ISBN 978-0-470-12828-2.
21.Hung, J.N. and Hocheng, H., 2012, “Frequency Effects and Life Prediction of Polysilicon Microcantilever Beams in Bending Fatigue”, Journal of Micro/ Nanolithography, MEMS, and MOEMS (JM3), Vol. 11, No. 2, 021206.
22.Tsao, C.C., Hocheng, H. and Chen, Y.C., 2012, “Delamination Reduction in Drilling Composite Materials by Active Backup Force”, CIRP Annals - Manufacturing Technology, Vol.61, pp.91-94.
23.Hung, J.N., Sato, K. and Hocheng, H., 2011, "Torsion Fatigue of Polysilicon Microbridge Structure", The Japanese Journal of Applied Physics, Vol.50, pp.06GM07:1-5.
24.Hocheng, H., Hsu, W.H. and Shy, J.T., 2011, "In-Situ Monitoring of Pattern Filling in Nanoimprint Lithography using Surface Plasmon Resonance", Journal of NanoScience and NanoTechnology, Vol.11, pp.5279-5284.
25.Hocheng, H. and Wang, K.Y., 2011, Analysis of Excimer Laser Machining of Micropatterns, a book of LAP Lambert Academic Publishing, Germany, ISBN: 978-3-8443-9569-3/3844395695.
26.Chou, T.H., Yang, W.H., Huang, T.Y., Hocheng, H., 2011, “Roll-to-Roll Embossing of Sunlight Guide Film with Wide Outgoing Angle”, International Journal of Automation Technology, Vol.5, pp. 212-217.
27.Hocheng, H., Huang, T.Y., Chou, T.H., Yang, W.H., 2011, "Microstructural Fabrication and Design of Sunlight Guide Panels of Inorganic-Organic Hybrid Material Energy and Buildings", Energy and Buildings, Vol.43, pp.1011-1019.
28.H. Hocheng, C. M. Chen, Y. C. Chou, and C. H. Lin, “Study of a Novel Electrical Routing and Integrated Package on Bio-compatible Flexible Substrates,” Microsystem Technologies, Vol. 16, pp. 423-430, 2010.
29.H. Hocheng and T. T. Wen, “Submicron Imprint of Trench Structures by External and Intrinsic Electromagnetic Force,” CIRP Annals - Manufacturing Technology, Vol. 460, pp. 25-28, 2010.
30.Hocheng, H., Huang, Z.Y., Chou, T.S. and Yang, W.H., 2010, "A Brighter Place: Overview of Submicron-Patterned Sunlight Guide", Journal of Achievements in Materials and Manufacturing Engineering celebrating the 65th Anniversary of Materials Science and Engineering in Silesia Vol. 43, pp.409-417.
31.Hocheng, H. and Hsu, W.S., 2009, “An Innovative Method for Uniform Pattern Transfer in Nanoimprint”, Journal of NanoScience and NanoTechnology, Vol.9, pp.4267-4272.
32.Hocheng, H., Wang, J.C. Chang, J.H. and Shen, W.C., 2009, “Laser-guided Pattern Writing through Thiobacillus Ferrooxidans Metabolite”, Microelectronic Engineering, Vol. 86, pp.565-568.
33.Hocheng, H. and Tsao, C. C., 2009, “A Treatment of Drilling-Induced Delamination of Composite Materials”, Chapter 1 in Drilling of Composite Materials, Ed. J.P. Davim, Nova Science, USA.
34.Hocheng, H. and Wen, T.T., 2009, “Innovative Rapid Replication of Microlens Arrays using Electromagnetic Force-assisted UV-imprinting”, Journal of Micromechanics and Microengineering, Vol.19, pp.1-6.
京公网安备 11010802027423号