近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
期刊論文
1.Y. H. Chen, F. Y. Shih, M. T. Lee, Y. C. Lee, Y. B. Chen, "Development of lightweight energy-saving glass and its near-field electromagnetic analysis." Energy (2020) 193, 116812
2.K. R. Pyun, Y. Jung, M. T. Lee, S. H. Ko, "A review on investigation of graphene thermal property: Recent development in measurement techniques." Multiscale Science and Engineering (2019) 1-13 (Springer)
3.W. K Chen, J. C. Huang, Y. C. Chen, M. T. Lee, J. Y. Juang, "Deposition of highly transparent and conductive Ga-doped zinc oxide films on tilted substrates by atmospheric pressure plasma jet." Journal of Alloys and Compounds (2019) 802 (25) 458-466 (SCI)
4.C. K. Yang and M. T. Lee*, "An optimization analysis of cooling channel design in a CNC lathe spindle system." Journal of the Chinese Society of Mechanical Engineering (2019) 40 (3) 231-238 (SCI)
5.M. J. Gu, M. T. Lee, C.H. Huang, C. C. Wu, and Y. B. Chen*, "Synchronous scattering and diffraction from gold nanotextured surfaces with structure factors." Journal of Quantitative Spectroscopy and Radiative Transfer (2018) 210 165-172 (SCIE)
6.C. J. Lan, S. L. Tsai, M. T. Lee*, "Direct silver micro circuit patterning on transparent polyethylene terephthalate film using laser-induced photothermochemical synthesis." Micromachines (2017) 8 (2) 32 (SCIE) [invited paper, featured on cover]
7.H. Nakajima, D. Lee, M. T. Lee, C. P. Grigoropoulos, "Hydrogen production with CuO/ZnO nanowire catalyst for a nanocatalytic solar thermal steam-methanol reformer." International Journal of Hydrogen Energy (2016) 41 (38) 16927-16931 (SCI)
8.Y. H. Huang, C. W. Huang, Y. D. Chou, C. C. Ho, M. T. Lee*, "An experimental and numerical study of the thermal issues of a high-speed built-in motor spindle." Smart Science (2016) 1-7 (Scopus) [thesis award invited article]
9.K. S. Yang, W. T. Ding, C. T. Yeh, M. T. Lee*, C. C. Wang. "An experimental and analytical investigation of the photo-thermal-electro characteristics of a high power InGaN LED module." Applied Thermal Engineering, 98 (5) (2016) 756-765 (SCI)
10.S. L. Tsai, Y. K. Liu, H. Pan, C. H. Liu, M. T. Lee*. "The coupled photothermal reaction and transport in a laser additive metal nanolayer simultaneous synthesis and pattering for flexible electronics." Nanomaterials, 6 (2016) 12 (SCIE)
11.A. K. Sekone, Y. B. Chen, M. C. Lu, W. K. Chen, C. A. Liu and M. T. Lee*. "Silicon nanowires for solar thermal energy harvesting: An experimental evaluation on the trade-off effects of the spectral optical properties." Nanoscale Research Letters 11 (1) (2016) 1-8 (SCIE)
12.C. F. Tseng, T. Y. Tsai, Y. H. Huang, M. T. Lee*, R. H. Horng. "Transport phenomena and the effects of reactor geometry for epitaxial GaN growth in a vertical MOCVD reactor." Journal of Crystal Growth 432 (2015) 54-63 (SCI)
13.A. K. Sekone, Y. Y. Hung, C. T. Yeh, M. T. Lee*. "Experimental study and analysis of porous thin plate drying in a convection dryer." International Communications in Heat and Mass Transfer 68 (2015) 200-207 (SCI)
14.J. Kwon, H. Cho, H. Lee, S. Hong, Y. D. Suh, H. Moon, D. Kim, J. Cho, M. T. Lee, J. Yeo, S. H. Ko. "Facile photoreduction process for ZnO/Ag hierarchical nanostructured photoelectrochemical cell integrated with supercapacitor." ECS Journal of Solid State Science and Technology 4 (12) (2015) 424-428 (SCI)
15.K. S. Yang, T. Y. Yang, C. W. Tu, M. T. Lee*. "A novel flat polymer heat pipe with thermal via for cooling electronic devices." Energy Conversion and Management 100 (2015) 37-44 (SCI)
16.Y.K. Liu, Y.Y. Sie, C.A. Liu, M.T. Lee*. "A novel laser direct writing system integrated with A&F XXY alignment platform for rapid fabrication of flexible electronics." Smart Science 3 (2) (2015) 87-91 (Scopus) [thesis award invited article]
17.J. Yeo, G. Kim, S. Hong, J. Lee, J. Kwon, H. Lee, H. Park, W. Manoroktul, M. T. Lee, B. J. Lee, C. P. Grigoropoulos, S. H. Ko. "Single nanowire resistive nano-heater for highly localized thermo-chemical reactions: Localized hierarchical heterojunction nanowire growth." Small 10 (24) 5014 (2014) (SCI) [featured on cover]
18.Y. K. Liu and M. T. Lee*. "Laser direct synthesis and patterning of silver nano/microstructures on a polymer substrate." ACS Applied Materials & Interfaces 6 (2014) 14576-14582 (SCI)
19.K. S. Yang, C. H. Chung, C. W. Tu, C. C. Wong, T. Y. Yang, M. T. Lee*. “Thermal spreading resistance characteristics of a high power light emitting diode module.” Applied Thermal Engineering 70 (1) (2014) 361-368 (SCI)
20.C. H. Chung, K. S. Yang*, K. H. Chien, M. S. Jeng, M. T. Lee*. “Heat transfer characteristics in high power LED packaging.” Smart Science 2 (1) (2014) 1-6 [thesis award invited article]
21.M. T. Lee*, C. P. Grigoropoulos and R. Greif. “A Study of the transport phenomena in a wall coated micro steam methanol reformer.” International Journal of Hydrogen Energy 39 (2014) 2008-2017 (SCI)
22.C. Chen, J. T. Teng, C. H. Cheng, S. Jin, S. Huang, C. Liu, M. T. Lee, H. H. Pan and R. Greif. “A study on fluid flow and heat transfer in rectangular microchannels with various longitudinal vortex generators.” International Journal of Heat and Mass Transfer 69 (2014) 203-214 (SCI)
23.K.S. Yang, C. H. Chung, M. T. Lee, S. B. Chiang, C. C. Wong, C. C. Wang. “An experimental study on the heat dissipation of LED lighting module using metal/carbon foam.” International Communications in Heat and Mass Transfer 48 (2013) 73-79 (SCI)
24.J. Yeo, S. Hong, D. Lee, N. Hotz, M. T. Lee, C. P. Grigoropoulos, S. H. Ko. “Next generation non-vacuum, maskless, low temperature nanoparticle ink laser digital direct metal patterning for a large area flexible electronics.” PLoS ONE 7 (8): e42315 (2012) (SCI)
25.D. Lee, H. Pan, A. Sherry, S. H. Ko, M. T. Lee, E. Kim, C. P. Grigoropoulos. “Large-area nanoimprinting on various substrates by reconfigurable maskless laser direct writing.” Nanotechnology 23 (2012) 344012 (SCI)
26.C. Kullmann, N. C. Schirmer, M. T. Lee, S. H. Ko, N. Hotz, C. P. Grigoropoulos, D. Poulikakos. “3D micro-structures by piezoelectric inkjet printing of gold nanofluids.”Journal of Micromechanics and Microengineering 22 (2012) 055022 (SCI)
27.M. T. Lee*, D. Lee, A. Sherry and C. P. Grigoropoulos. “Rapid selective metal patterning on polydimethylsiloxane (PDMS) fabricated by capillarity-assisted laser direct write.” Journal of Micromechanics and Microengineering 21 (2011) 095018 (SCI)
28.T. Xu, N. Zhao, F. Ren, R. Hourani, M. T. Lee, J. Y. Shu, S. Mao, B. A. Helms. “Sub-nanometer porous thin films by the co-assembly of nanotube subunits and block copolymers.” ACS Nano, 5 (2) (2011) 1376-1384 (SCI)
29.M. T. Lee*, M. Werhahn, D.J. Hwang, N. Hotz, R. Greif, D. Poulikakos, C.P. Grigoropoulos. “Hydrogen production with a solar steam-methanol reformer and colloid nanocatalyst.” International Journal of Hydrogen Energy. 35 (2010) 118-126 (SCI)
30.N. Hotz, R. Zimmerman, C. Weinmueller, M. T. Lee, C. P. Grigoropoulos, G. Rosengarten, D. Poulikakos. “Exergetic analysis and optimization of a solar-powered reformed methanol fuel cell micro-powerplant.”Journal of Power Sources,195 (2010)1676-1687 (SCI)
31.M. T. Lee*, D.J. Hwang, R. Greif and C.P. Grigoropoulos. “Nanocatalyst fabrication and the production of hydrogen by using photon energy.” International Journal of Hydrogen Energy, 34 (2009) 1835-1843 (SCI)
32.J. S. Suh, M. T. Lee, R. Greif, C.P. Grigoropoulos. ”Transport phenomena in a steam-methanol reforming microreactor with internal heating.” International Journal of Hydrogen Energy, 34 (2009), 314-322 (SCI)
33.M. T. Lee*, R.Greif, C.P.Grigoropoulos, H.G.Park, F.K.Hsu. “Transport in packed-bed and wall-coated steam-methanol reformers.”Journal of Power Sources,166 (2007)194-20 (SCI)
34.J. S. Suh, M. T. Lee, R. Greif, C.P. Grigoropoulos. “A Study of steam methanol reforming in a microreactor.” Journal of Power Sources, 173 (2007) 458-466 (SCI)
35.N. Hotz, M. T. Lee, C.P. Grigoropoulos, S. M. Senn, D. Poulikakos. “Exergetic analysis of fuel cell micropowerplants fed by methanol.” International Journal of Heat and Mass Transfer, 49 (2006) 2397-2411 (SCI)
研討會論文
1.Invited Seminar, "Photo-thermal-fluidic transport phenomena in nano-microscales: applications to energy conversion and advanced microfabrication." April 10, 2017, Tokyo University of Science, Japan
2.M.T. Lee, Y.B. Chen, M.C. Lu, "A Study of Silicon Nanowires for Solar Thermal Energy Harvesting and Utilization." IMECE 2016, Nov. 11-17, 2016, Phoenix, AZ USA
3.Keynote Speaker, "Photo-thermal Energy Conversion Enhancement and Utilizations Using Nanomaterials." APEnergy 2016, Sep. 4~8, National Tsing Hua University, Hsinchu, Taiwan
4.M.T. Lee, "Green microfabrication for flexible electronics by laser direct synthesis and pattering technology." SPIE Photonics West, Feb. 13-18, 2016, San Francisco, CA USA.
5.M.T. Lee, Y.K. Liu. "Microscale heat and mass transport phenomena of laser synthesis and patterning of metal microstructures on a polymer substrate for flexible electronics." ASME 2016 Micro/Nanoscale Heat and Mass Transfer Inernational Conference, Jan. 4-6, 2016, Biopolis, Singapore.
6.M.T.Lee, K.S. Yang, "Thermal Spreading Resistance Characteristics of a High Power Light Emitting Diode Module." ASME IMECE, Nov. 14-20, 2014, Montreal, Canada.
7.Invited Speaker, 2014 International Workshop on Micro/Nanoscale Heat Transfer and Energy (微奈米尺度熱傳及能源國際工作坊). Nov. 2014, National Cheng Kung University, Tainan City, Taiwan
8.洪名杰、何志成、張建宏、李明蒼, "工具機主軸結構熱物理現象分析", 第三十八屆全國力學會議研討會論文, 2014年11月, Taiwan
9.劉誼凱、李明蒼, "新型雷射金屬微結構直寫技術運用於可撓性導電基板製造", 第三十八屆全國力學會議研討會論文, 2014年11月, Taiwan
10.鍾濟鴻、李明蒼、楊聰義、翁潤群、楊愷祥, "高功率LED模組擴散熱阻特性之研究", 中國機械工程學會第三十屆全國學術研討會論文集, 2013年12月, Taiwan
11.曾建富、李明蒼、洪瑞華, "以數值方法研究氮化鎵薄膜之生長", 中國機械工程學會第三十屆全國學術研討會論文集, 2013年12月, Taiwan
12.洪昱永、李明蒼, "太陽能乾燥器乾燥速率之研究", 中國機械工程學會第三十屆全國學術研討會論文集, 2013年12月, Taiwan
13.Invited Speaker, International Workshop on EEWS (Energy, Environment, Water, and Sustainability), KAIST, 2013, Daejeong, Korea
14. M.T. Lee. "Solar-Thermal Highly Conversion Efficiency Steam-Methanol Reformer with Nanocatalyst" (poster presentation) 2013 Asia Pacific Clean Energy Summit, Sep. 2013, Honolulu, Hawaii USA
15. M.T. Lee. "Solar-Thermal Steam-Methanol Reformer with Nanocatalyst" (poster presentation) 2013 International Hydrogen and Fuel Cells Conference, July 2013, Napa Valley, CA USA
16.鍾濟鴻、翁潤群、李明蒼、簡國祥、楊愷祥, "LED封裝方式對熱傳性能之研究", 中國機械工程學會第二十九屆全國學術研討會論文集, 2012年12月, Taiwan
17.M. T. Lee, N. Hotz, R. Greif, C. P. Grigoropoulos. “Transport Phenomena in a Nanocatalytic Solar thermal Steam-Methanol Reformer.” 2012 International Conference on Hydrogen Production, June 24-27, 2012 Seoul, South Korea
18.N. Hotz, M. T. Lee, C. P. Grigoropoulos, R. Zimmerman, G. Rosengarten and D. Poulikakos. “Exergetic Analysis of a Solar-Heated Fuel Cell System Fed by Methanol.” ASME 2010 4th International Conference on Energy Sustainability, ES2010-90252, May 17-22, 2010 Phonics AZ, USA
19.H.G.Park, M.T. Lee, F.K.Hsu, C.P.Grigoropoulos, R.Greif and C.H.Lin. “Transport in a methanol steam reformer as the fuel processor for fuel cell systems.” Proceedings of IMECE 2004, JMECE2004-61 208, Nov. 13-19, 2004 Anaheim CA, USA
京公网安备 11010802027423号