近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[29] Y.-F. Jia, R.-J. Pan, P.-Y. Zhang, Z.-T. Sun, X.-R. Chen, X.-C. Zhang*, X.-J. Wu*, Enhanced surface strengthening of titanium treated by combined surface deep-rolling and oxygen boost diffusion technique, Corrosion Science 157 (2019) 256-267.
[28] Y.-F. Jia, Y.-X. Liu, J. Huang, Y. Fu, X.-C. Zhang*, Y.-C. Xin*, S.-T. Tu, M.-D. Mao, F. Yang*, Fatigue-induced evolution of nanograins and residual stress in the nanostructured surface layer of Ti–6Al–4V, Materials Science and Engineering: A 764 (2019) 138205.
[27] Y.-X. Liu, Y.-F. Jia, X.-C. Zhang, H. Li, R.-Z. Wang, S.-T. Tu, Effect of Ultrasonic Deep Rolling on High-Frequency and Ultrasonic Fatigue Behavior of TC4, Springer International Publishing, Cham, 2019, pp. 311-318.
[26] Y. Li, W. Mao, K. Zhang, Y.-F. Jia, F. Yang, Rate-dependent plastic buckling of a core–shell wire, Journal of Physics D: Applied Physics 52(43) (2019) 435502.
[25] Yu Sun, Yun-Fei Jia*, Muhammad Haroon, Huan-Sheng Lai, Wenchun Jiang, Shan-Tung Tu*. Welding residual stress in HDPE pipes: measurement and numerical simulation, Journal of Pressure Vessel Technology-Transactions of the ASME, 2019, 141(14).
[24] Xumin Zhu, Congyang Gong, Yun-Fei Jia*, Runzi Wang, Chengcheng Zhang, Yao Fu, Shan-Tung Tu, Xian-Cheng Zhang*. Influence of grain size on the small fatigue crack initiation and propagation behaviors of a nickel-based superalloy at 650 °C, Journal of Materials Science & Technology, 2019, 39(8): 1607-1617.
[23] Xiao Li, Bo Guan, Yun-Fei Jia*, Yun-Chang Xin, Cheng-Cheng Zhang, Xian-Cheng Zhang*, Shan-Tung Tu. Microstructural evolution, mechanical properties and thermal stability of gradient structured pure nickel, Acta Metallurgica Sinica (English Letters), 2019, 32(8): 951-960.
[22] Zi-Meng Wang, Yun-Fei Jia*, Xian-Cheng Zhang*, Yao Fu, Cheng-Cheng Zhang, Shan-Tung Tu. Effects of Different Mechanical Surface Enhancement Techniques on Surface Integrity and Fatigue Properties of Ti-6Al-4V: A Review, Critical Reviews in Solid State and Materials Sciences, 2019.
[21] Jie Huang , Kai-Ming Zhang , Yun-Fei Jia , Cheng-Cheng Zhang , Xian-Cheng Zhang *, Xian-Feng Ma*, Shan-Tung Tu. Effect of thermal annealing on the microstructure, mechanical properties and residual stress relaxation of pure titanium after deep rolling treatment, Journal of Materials Science & Technology, 2019, 35: 409-417.
[20] A. Li, Y. Jia, S. Sun, Y. Xu, B.B. Minsky, M.A.C. Stuart, H. Cölfen, R. von Klitzing, X. Guo, Mineral-Enhanced Polyacrylic Acid Hydrogel as an Oyster-Inspired Organic–Inorganic Hybrid Adhesive, ACS Applied Materials & Interfaces, 2018, 10(12): 10471-10479.
[19] Cui Y-Y, Jia Y-F*, Xuan F-Z*. Micro-deformation evolutions of the constituent phases in duplex stainless steel during cyclic nanoindentation. Scientific Reports, 2018, 8(1): 6199.
[18] Jiang Y, Li Y, Jia Y-F, Zhang X-C, Gong J-M. Gradient Elastic–Plastic Properties of Expanded Austenite Layer in 316L Stainless Steel. Acta Metallurgica Sinica (English Letters), 2018, 31(8): 831-841.
[17] Zhao P-C, Li S-X, Jia Y-F*, Zhang C-C, Zhang X-C*, Tu S-T. Very high-cycle fatigue behaviour of Ti-6Al-4V alloy under corrosive environment, Fatigue & Fracture of Engineering Materials & Structures, 2018, 41(4): 881-893.
[16] Liu L-L, Jia Y-F*, Xuan F-Z. Gradient effect in the waved interfacial layer of 304L/533B bimetallic plates induced by explosive welding, Materials Science and Engineering: A, 2017, 704: 493-502.
[15] Jia Y-F, Cui Y-Y, Xuan F-Z*, Yang FQ*. Comparison between single loading-unloading indentation and continuous stiffness indentation, RSC Advances, 2017, 57(7): 35655-35665.
[14] Y.Y. Cui, Y.F. Jia, F.Z. Xuan, A Comparative Study on the Cyclic Behavior of Austenite/Ferrite Phases Characterized by the Nanoindentation, Applied Mechanics and Materials 853 (2017) 137-141.
[13] 李豪赛, 贾云飞*, 轩福贞. 基于柔性布技术的梯度WC增强的NiCrBSi合金涂层制备及性能研究. 机械工程材料, 2018, 42(6): 59-64.
[12] 刘丽丽, 贾云飞*, 轩福贞. 304L/533B 复合钢板界面几何参数对界面力学性能影响. 压力容器, 2017, 34(9): 1-7.
[11] 赖焕生, 范登帅, 贾云飞, 刘康林, 徐书丰, 涂善东, 高密度聚乙烯管在核设备中应用的关键技术挑战, 压力容器, 34 (2017) 45-54.
[10] Chen Y-H, Jia Y-F, Yang F, Huang C-C, Lee S*. Boussinesq type solution for a viscoelastic thin film on an elastic substrate, International Journal of Mechanical Sciences, 2016, 117, 79-92.
[9] Jia Y-F, Xuan F-Z, Yang FQ*. Numerical Analysis of Indentation of an Elastic Hemispherical Shell, Journal of Mechanics, 2016, 32, 245-253.
[8] Chen Y-H, Jia Y-F, Yang F, Huang C-C, Lee S*. Boussinesq problem of a Burgers viscoelastic layer on an elastic substrate, Mechanics of Materials, 2015, 87, 27-39.
[7] Jia Y-F, Xuan F-Z*, Yang FQ*. Viscoplastic response of tooth enamel under cyclic microindentation, Materials Science and Engineering: C, 2015, 55, 448-456.
[6] Jia Y-F, Xuan F-Z*, Chen XP, Yang FQ*. Finite element analysis of cyclic indentation of bi-layer enamel, Journal of Physics D: Applied Physics, 2014, 47, 175401.
[5] Jia Y-F, Xuan F-Z*, Yang F*. Finite element analysis of depth effect on measuring elastic modulus of a core-shell structure for application of instrumented indentation in tooth enamel, Materials Science and Engineering: C, 2014, 37, 84-89.
[4] Jia Y-F, Xuan F-Z*, Yang F*. Analysis of the effect of a compliant layer on indentation of an elastic material, Journal of the Mechanical Behavior of Biomedical Materials, 2013, 25, 33-40.
[3] Jia Y-F, Xuan F-Z*, Tu S-T. A modified analysis for thermal–mechanical properties of staggered structure in biomimetic materials, Journal of the Mechanical Behavior of Biomedical Materials, 2012, 16, 109-120.
[2] Jia Y-F, Xuan F-Z*. Anisotropic fatigue behavior of human enamel characterized by multi-cycling nanoindentation, Journal of the Mechanical Behavior of Biomedical Materials, 2012, 16, 163-168.
[1] Jia Y-F, Xuan F-Z*. Anisotropic wear behavior of human enamel at the rod level in terms of nanoscratching, Wear, 2012, 290, 124-132.
京公网安备 11010802027423号