近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Qinghua Wang, Haoxuan You, Zach Lowery, Songwei Li, Hao Fu, Ruoxing Wang, Caterina Lamuta, Fatima Toor, Wenzhuo Wu, Albert Ratner, Hongtao Ding, 2020, “An Innovative Laser Metasurface Fabrication Technique for Highly Flexible Optoelectronic Devices”. Journal of Micro and Nano-Manufacturing, 8(1), 010901. (EI)
Qinghua Wang*, Avik Samanta*(共同一作), Scott Shaw, Hui Hu, Hongtao Ding, 2020, “Nanosecond Laser-based High-throughput Surface Nanostructuring (nHSN) ”. Applied Surface Science, 507: 145136. (SCI，IF: 6.182)
Qinghua Wang, Bingtao Gao, Michaella Raglione, Huixing Wang, Baojia Li, Fatima Toor, Mark A. Arnold, Hongtao Ding, 2019, “Review of THz Bandpass Metamaterials: Design, Fabrication and Modulation”. Laser & Photonics Reviews, 1900071. (Frontispiece of Volume 13, Issue 11，SCI，IF: 10.655)
Qinghua Wang, Avik Samanta, Scott Shaw, Fatima Toor, Hongtao Ding, 2019, “Colorizing Hydrophobic Ti-6Al-4V Surface via High-Throughput Laser Surface Nanostructuring”. Journal of Manufacturing Processes, 43(Part B): 70-75. (SCI，IF: 4.086)
Avik Samanta*, Qinghua Wang*(共同一作), Scott Shaw, Hongtao Ding, 2019, “Nanostructuring of laser textured surface to achieve superhydrophobicity on engineering metal surface”. Journal of Laser Applications, 31, 022515 (2019). (SCI，IF: 1.41)
Qinghua Wang, Bao-jia Li, Fatima Toor, Hongtao Ding, 2019, “Novel laser-based metasurface fabrication process for transparent conducting surfaces”. Journal of Laser Applications, 31, 022505 (2019). (SCI，IF: 1.41)
Qinghua Wang, Michaella Raglione, Baojia Li, Xin Jin, Fatima Toor, Mark A. Arnold, Hongtao Ding, 2019, “High Throughput Laser Textured Transparent Conducting Surfaces for Terahertz Bandpass Metamaterials”. Scientific Reports, 9:3083. (SCI，IF: 3.998)
Avik Samanta*, Qinghua Wang*(共同一作), Hongtao Ding, 2018, “A Novel Selective Laser Melting Process for Glass Fiber-Reinforced Metal Matrix Composites”. Manufacturing Letters, 18:27-30. (EI)
Qinghua Wang, Justin D. Morrow, Chao Ma, Neil A. Duffie, Frank E. Pfefferkorn, 2015, “Surface prediction model for thermocapillary regime pulsed laser micro polishing of metals”. Journal of Manufacturing Processes, 20(Part 1): 340-348. (SCI，IF: 4.086)
Avik Samanta, Qinghua Wang, Scott Shaw, Hongtao Ding, 2020, 'Roles of Chemistry Modification for Laser Textured Metal Alloys to Achieve Extreme Surface Wetting Behaviors”. Materials and Design, 192: 108744. (SCI，IF: 6.289)
Avik Samanta, Wuji Huang, Hassan Chaudhry, Qinghua Wang, Scott Shaw, Hongtao Ding, 2020, 'Design of Chemical Surface Treatment for Laser Textured Metal Alloy to Achieve Extreme Wetting Behavior”. ACS Applied Materials & Interfaces, 12(15): 18032-18045. (SCI，IF: 8.758)
Avik Samanta, Qinghua Wang, Gurjap Singh, Scott Shaw, Fatima Toor, Albert Ratner, Hongtao Ding, 2020, “Nanosecond Pulsed Laser Processing Turns Engineering Metals Antireflective and Superwetting”. Journal of Manufacturing Processes, 54: 28-37. (SCI，IF: 4.086)
Yang Liu, Zichen Zhang, Haiyang Hu, Hui Hu, Avik Samanta, Qinghua Wang, Hongtao Ding, 2019, “An Experimental Study to Characterize the Wettability and Icephobicity of a Surface Treated with a Novel Laser-based Surface Texturing Technique”. Surface and Coatings Technology, 374: 634-644. (SCI，IF: 3.784)
Tim Heiderscheit, Ninggang Shen, Qinghua Wang, Avik Samanta, Benxin Wu, Hongtao Ding, 2019, “Keyhole Laser Cutting of Carbon Fiber Reinforced Polymer using a Long-Duration Nanosecond Pulse Laser”. Optics and Lasers in Engineering, 120: 101-109. (SCI，IF: 4.273)
Bao-jia Li, Yong-ying Wang, Li-jing Huang, Hai-di Cao, Qinghua Wang, Nai-fei Ren, Hongtao Ding, 2018, “Ultrasonic-vibration-assisted laser annealing of fluorine-doped tin oxide thin films for improving optical and electrical properties: Overlapping rate optimization”. Ceramics International, 44(18): 22225-22234. (SCI，IF: 3.83)
Bao-jia Li, Yong-ying Wang, Li-jing Huang, Hai-di Cao, Qinghua Wang, Hongtao Ding, Nai-fei Ren, 2018, “Influences of ultrasonic vibration on morphology and photoelectric properties of F-doped SnO2 thin films during laser annealing”. Applied Surface Science, 458: 940-948. (SCI，IF: 6.182)
Ninggang Shen, Avik Samanta, Qinghua Wang, Hongtao Ding, 2017, “Selective Laser Melting of Fiber-Reinforced Glass Composites”. Manufacturing Letters, 14: 6-9. (EI)
Shuangyu Liu, Shixian Chen, Qinghua Wang, Yanqing Li, Hong Zhang, Hongtao Ding, 2017, “Analysis of plasma characteristics and conductive mechanism of laser assisted pulsed arc welding”. Optics and Lasers in Engineering, 92: 39-47. (SCI，IF: 4.273)
Baoqing Zhang, Qinghua Wang, Ninggang Shen, Hongtao Ding, 2017, “Experimental Investigation and Numerical Analysis of Mechanical Ruling for an Aluminum Coated Diffraction Grating”. ASME Journal of Manufacturing Science and Engineering, 139: 021003. (SCI，IF: 2.875)
Ninggang Shen, Hongtao Ding, Qinghua Wang, Hua Ding, 2016, “Effect of Confinement on Surface Modification for Laser Peen Forming without Protective Coating”. Surface and Coatings Technology, 289: 194-205. (SCI，IF: 3.784)
Frank E. Pfefferkorn, Neil A. Duffie, Justin D. Morrow, Qinghua Wang, 2014, “Effect of Beam Diameter on Pulsed Laser Polishing of S7 Tool Steel”. CIRP Annals Manufacturing Technology, 63(1): 237-240. (SCI，IF: 3.641)
Anguo Huang, Yuan Liu, Shuhui Hu, Qinghua Wang, Liling Zhen, 2013, “Laser Cladding of Fluoridated Hydroxyapatite Coatings on Titanium Alloy for Bone Replacement Structures”. Advanced Materials Research 815: 540–546. (EI)
Lu Yang, Qinghua Wang, Jie Li, Yuan Liu, Anguo Huang, 2013, “Reaction Kinetics of Mg2Si in the Laser Welding Pool of Aluminum Alloys”. Advanced Materials Research 813: 55–63. (EI)
会议论文
Qinghua Wang, Avik Samanta, Amanuel Hailu, Scott K. Shaw, Hongtao Ding, 'Fabrication of mechanically enhanced superhydrophobic surface using nanosecond laser-based high-throughput surface nanostructuring (nHSN)'. 5th CIRP Conference on Surface Integrity, June 3-5, 2020, Vitoria-Gasteiz, Spain.
Qinghua Wang, Bingtao Gao, Fatima Toor, Mark Arnold, Hongtao Ding, 'Laser process of transparent conducting surfaces for terahertz bandpass ultrathin metamaterials'. SPIE Proceedings Volume 11268, Laser-based Micro- and Nanoprocessing XIV; 112680H (2020). Conference: SPIE Photonics West 2020, February 1-6, 2020, San Francisco, CA, USA.
Qinghua Wang, Caterina Lamuta, Fatima Toor, Mark Arnold, Hongtao Ding, 'Laser-based Metamaterial Fabrication of Flexible THz Optics'. 56th Annual Technical Meeting of the Society of Engineering Science (SES2019), October 13-15, 2019, Washington University, St. Louis, MO, USA.
Haoxuan You, Zach Lowery*(共同一作), Qinghua Wang*(共同一作), Ruoxing Wang, Caterina Lamuta, Fatima Toor, Wenzhuo Wu, Albert Ratner, Hongtao Ding, “A Novel Laser Patterning Process for Highly Flexible Transparent Conducting Heater”. 3rd World Congress on Micro and Nano Manufacturing, Paper No. 35, September 10-12, 2019, Raleigh, NC, USA.
Qinghua Wang, Avik Samanta, Scott Shaw, Fatima Toor, Hongtao Ding, “Colorizing Hydrophobic Ti-6Al-4V Surface via High-Throughput Laser Surface Nanostructuring”. Proceedings of the 47th SME North American Manufacturing Research Conference (NAMRC), Paper No. NAMRC-191, June 10-14, 2019, Erie, PA, USA.
Qinghua Wang, Bao-jia Li, Fatima Toor, Hongtao Ding, “A novel laser-based metasurface fabrication (LMF) process for transparent conducting surfaces”. Paper # M506, The International Congress on Applications of Lasers & Electro-Optics (ICALEO), 2018.
Qinghua Wang, Baoqing Zhang, Ninggang Shen, Hongtao Ding, “Mechanical Ruling of Diffraction Grating — Part I: Aluminum Film Preparation and Characterization”. 2016 ASME Manufacturing Science and Engineering Conference (MSEC 2016), June 27-July 1, 2016, Blacksburg, Virginia, USA, MSEC 2016-8713.
Qinghua Wang, Ninggang Shen, Baoqing Zhang, Hongtao Ding, “Mechanical Ruling of Diffraction Grating — Part II: Experimental Investigation and Numerical Simulation”. 2016 ASME Manufacturing Science and Engineering Conference (MSEC 2016), June 27-July 1, 2016, Blacksburg, Virginia, USA, MSEC 2016-8715.
Qinghua Wang, Justin D. Morrow, Chao Ma, Neil A. Duffie, Frank E. Pfefferkorn, “Surface Prediction Model for Thermocapillary Regime Pulsed Laser Micro Polishing of Metals”. 43rd SME North America Manufacturing Research Conference (NAMRC 43), June 8-12, Charlotte, NC, NARMC 43-0067.
Qinghua Wang, Justin D. Morrow, Neil A. Duffie, Frank E. Pfefferkorn, “Effects of Initial Surface Texture on Pulsed Laser Micro Polishing of S7 Tool Steel”. 10th International Conference on MicroManufacturing, March 31- April 2, 2015, Milan, 4M/ICOMM 2015-0591.
Avik Samanta, Qinghua Wang, Scott Shaw, Hongtao Ding, “Laser Chemical Processes to Tune Metal Surface Wettability”. 56th Annual Technical Meeting of the Society of Engineering Science (SES2019), October 13-15, 2019, Washington University, St. Louis, MO, USA.
Avik Samanta, Qinghua Wang, Gurjap Singh, Scott Shaw, Fatima Toor, Albert Ratner, Hongtao Ding, “Nanosecond Pulsed Laser Processing Turns Engineering Metals Antireflective and Superwetting”. Proceedings of the 47th SME North American Manufacturing Research Conference (NAMRC), Paper No. NAMRC-190, June 10-14, 2019, Erie, PA, USA.
Avik Samanta, Qinghua Wang, Scott Shaw, Fatima Toor, Hongtao Ding, “Laser-silanization nanostructuring process for superwicking metal surfaces'. The 8th International Congress on Laser Advanced Materials Processing, May 21-24, Hiroshima, Japan.
Avik Samanta, Qinghua Wang, Scott Shaw, Hongtao Ding, “Nanostructuring of laser textured surface to achieve superhydrophobicity on engineering metal surface”. Paper # P103, The International Congress on Applications of Lasers & Electro-Optics (ICALEO), 2018.
Justin D. Morrow, Qinghua Wang, Neil A. Duffie, Frank E. Pfefferkorn, “A Hybrid Surface Processing Method using Surface Alloying and Pulsed Laser Micro Melting on S7 Tool Steel”. 2015 ASME Manufacturing Science and Engineering Conference (MSEC 2015), June 8-12, Charlotte, NC, MSEC 2015-9446.
Justin D. Morrow, Qinghua Wang, Frank E. Pfefferkorn, “Microstructure of S7 Tool Steel after Pulsed Laser Micro Polishing”. 10th International Conference on MicroManufacturing, March 31- April 2, 2015, Milan, 4M/ICOMM 2015-0592.
Justin D. Morrow, Qinghua Wang, Neil A. Duffie, Frank E. Pfefferkorn, “Effects of Pulsed Laser Micro Polishing on Microstructure and Mechanical Properties of S7 Tool Steel”. 9th International Conference on MicroManufacturing, March 26-8, 2014, Singapore, ICOMM 2014-0103.
京公网安备 11010802027423号