近期论文
查看导师新发文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
[1]孙刚;仇晓黎;彭子平;SUNGang;QIUXiaoli;PENGZiping, 2015, 基于SolidWorks的ATC凸轮机构CAD系统开发, 机械制造与自动化, (1), p 91-93
[2]仇晓黎, 2014, 第六章机床及系统卷, 机床数字控制技术手册, 王先逵,易红, 国防工业出版社, pp 001-082, 中国
[3]Qiu, Xiao-Li; Sun, Gang, 2014, The approachment for developing a CAD system for cam mechanisms of ATC, 2014 International Conference on Applied Mechanics and Mechanical Automation, AMMA 2014, 2014/5/20-2014/5/21, pp 591-595, ChinaMacao, China
[4]Liu, Xiaojun; Hong, Yi; Zhonghua, Ni; Jianchang, Qi; Xiaoli, Qiu, 2013, Process planning optimization of hole-making operations using ant colony algorithm, International Journal of Advanced Manufacturing Technology, 69(1-4), pp 753-769 (EI, SCI)
[5]汤文成;倪俊;幸研;仇晓黎;赵勇;吴晓飞;庄建凯, 2013, 金属薄壁件铆接装配的铆钉镦粗方向确定方法, CN201310185506.X
[6]王树桥;幸研;田秘;仇晓黎;齐建昌;WANGShuqiao;XINGYan;TIANMi;QIUXiaoli;QIJianchang, 2013, 混合进化算法的Metropolis蒙特卡罗MEMS单晶硅湿法刻蚀工艺模型, 机械工程学报, 49(5), p 167-172
[7]邹里云;仇晓黎;赵义顺;ZOULiyun;QIUXiaoli;ZHAOYishun, 2013, Ckh1463精密数控车削中心电主轴热特性分析, 机床与液压, 41(13), p 20-25
[8]崔柳燕;仇晓黎;CUIliu-yan;QIUXiao-li, 2013, 笔记本计算机机身和硬盘支架系统的振动分析, 机械制造与自动化, 42(5), p 123-126,129
[9]Xiaoli, Qiu; Xingyan; Shuang, Feng, 2013, The Implement of Robotic Cutting Trajectory Plan for Pressure Vessel, 3rd International Conference on Frontiers of Manufacturing and Design Science (ICFMD 2012), 2012/12/11-2012/12/13, pp 570-574, 中国Hong Kong, PEOPLES R CHINA
[10]王引;仇晓黎;刘明灯;赵鹏;WANGYin;QIUXiao-li;LIUMing-deng;ZHAOPeng, 2012, 基于nc代码的工业机器人加工轨迹规划研究, 组合机床与自动化加工技术, (8), p 14-17
[11]Qiu, Xiao Li; Xu, Xun; Liu, Xiao Jun, 2011, Interoperable STEP-NC Enabled Process Planning for Intelligent Machining, International Conference on Mechatronics and Intelligent Materials, 2011/5/21-2011/5/22, pp 850-855, 中国Lijiang, PEOPLES R CHINA
[12]Liu, Xiaojun; Ni, Zhonghua; Qiu, Xiaoli; Liu, Tingyu, 2010, Recognising 2.5D manufacturing feature using neural network, International Journal of Computer Applications in Technology, 39(1-3), pp 19-26 (EI)
[13]Ding, Lian; Qiu, Xiao Li; Mullineux, Glen; Matthews, Jason, 2010, The development of the sustainable manufacturing processes, 2nd International Conference on Advances in Product Development and Reliability, PDR'2010, 2010/7/28-2010/7/30, pp 767-774, 中国Shenyang, China
[14]仇晓黎, 2009, Chap. 3Digital Product Information Sharing Based on STEP and XML, Collaborative Design and Planning for Digital Manufacturing, Xun Xu, Springer: 1 edition, pp 293-316, England
[15]刘晓军;易红;仇晓黎;倪中华;LIUXiao-jun;YIHong;QIUXiao-li;NIZhong-hua, 2009, 基于step-nc的可互操作capp/cam系统, 计算机集成制造系统, 15(3), p 502-507,565
[16]刘莉莉;仇晓黎;龚振;LIULi-li;QIUXiao-li;GONGZhen, 2009, 应用step-nc实现数控加工工艺设计, 现代制造工程, (6), p 31-34,101
[17]戴乐薇;幸研;仇晓黎;汤文成;DAILe-wei;XINGYan;QIUXiao-li;TANGWen-cheng, 2009, 动力学蒙特卡罗法体硅湿法刻蚀工艺仿真的研究与开发, 中国制造业信息化, 38(9), p 13-16
[18]卢正君;刘洋;程学刚;幸研;仇晓黎;张弢;刘少辉;LuZhengJun;LiuYang;ChengXueGang;XingYan;QiuXiaoLi;ZhangTao;LiuShaoHui, 2009, 基于cad的机器人焊接、切割离线编程系统, 机器人技术与应用, (6), p 36-40
[19]Xing, Yan; Qiu, Xiaoli, 2009, Kinetic Monte Carlo Simulation for the Evolution of Complex Surface in Fabrication of MEMS Devices, 1st International Conference of Chinese-Society-of-Micro-Nano-Technology, 2008/11/19-2008/11/22, pp 99-104, 中国Beijing, PEOPLES R CHINA
[20]仇晓黎;徐旬;刘晓军;QIUXiaoli;XUXun;LIUXiaojun, 2008, 应用step-nc实现智能加工特征信息处理, 制造技术与机床, (12), p 123-127
[21]Liu, Xiaojun; Yi, Hong; Ni, Zhonghua; Qiu, Xiaoli; Liu, Tingyu, 2008, Recognizing 2.5D manufacturing feature using neural network, 15th International Conference on Mechatronics and Machine Vision in Practice, 2008/12/2-2008/12/4, pp 306-311, 新西兰Auckland, NEW ZEALAND
[22]Qiu, Xiaoli; Xu, N.; Zhonghua, Ni, 2008, Digital Product Information Sharing Based on STEP and XML, 9th International Conference for Young Computer Scientists, 2008/11/18-2008/11/21, pp 708-713, 中国Zhangjiajie, PEOPLES R CHINA