近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
2019
Hongqin Ding , Shuyun Jiang, Jiang Xu. Cavitation erosion resistance of ZrC nanoceramic coating. Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science (Proc IMechE Part J: J Engineering Tribology). 2019, 0(0) 1–9
Hongqin Ding, Shuyun Jiang, Jiang Xu. Effect of chemical heat treatment on cavitation erosion resistance of stainless steel. Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science (Proc IMechE Part J: J Engineering Tribology). 2019, Vol. 233(11) 1753–1762
Shuyun Jiang, Yao Wang,Yiming Wang. Modelling of Static Stiffness for Linear Motion Roller Guide, Journal of Tribology, Transactions of ASME, NOVEMBER 2019, Vol. 141 / 111102-1-111102-11
Shengye Lin, Shuyun Jiang. Dynamic Characteristics of Motorized Spindle with Tandem Duplex Angular Contact Ball Bearings, Journal of Vibration and Acoustics,Transactions of ASME, DECEMBER 2019, Vol. 141 / 061004-1-061004-12
Shuyun Jiang, Yujiang Qiu. Reducing friction power losses of flywheel energy storage systems using PTFE composites: A technical note. Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science (Proc IMechE Part J: J Engineering Tribology). 2019, Vol. 233(10) 1616–1621
Xiaohui Lin, Ruiqi Wang, Shaowen Zhang, Chibin Zhang, Shuyun Jiang. Study of Cavitation Bubbles Evolution for High-Speed Water-Lubricated Spiral Groove Thrust Bearings. Journal of Tribology, Transactions of ASME, 2019,141 (5): 051703-1-051703-13
Shengye Lin, Shuyun Jiang, Study of the Stiffness Matrix of Preloaded Duplex Angular Contact Ball Bearings, Journal of Tribology, Transactions of ASME, 2019,141 (3): 032204-1-032204-13
Yujiang Qiu, Shuyun Jiang. Suppression of low-frequency vibration for rotor-bearing system of flywheel energy storage system. Mechanical Systems and Signal Processing. 2019 (121) APR 15 : 496-508
Huihui Feng, Shuyun Jiang, Aimin Ji. Investigations of the static and dynamic characteristics of water-lubricated hydrodynamic journal bearing considering turbulent, thermohydrodynamic and misaligned effects. Tribology International, 130 (2019) 245-260
J.Xu, S.K. Zhang, X.L. Lu, S.Y. Jiang, P.Munroe, Z.H. Xie , Effect of Al alloying on cavitation erosion behavior of TaSi2 nanocrystalline coatings, Ultrasonics – Sonochemistry, 59 (2019) 104742
B.Guo, J.Xu, X.L. Lu, S.Y. Jiang, P.Munroe, Z.H. Xie , Electronic structure, mechanical and physical properties of Ag alloyed alpha-Nb5Si3: First-principles calculations, Physica B: Condensed Matter 564 (2019) 80–90
J.Xu, S.Peng, B.Guo, S.Y. Jiang, P.Munroe, Z.H. Xie , Erosion-corrosion resistance of a beta-Ta2O5 nanocrystalline coating in two-phase fluid impingement environments, Materials Science and Technology,35(2019) 925-938
Jiang Xu, Wei Liu, Shuyun Jiang, Paul Munroe, Zong-Han Xie, Enhancing the cavitation erosion resistance of D8m-Ta5Si3 nanocrystalline coatings through Al alloying, Ultrasonics - Sonochemistry 50 (2019) 138–156
S.Peng, J.Xu,Z.Y.Li, S.Y. Jiang, P.Munroe, Z.H. Xie , A reactive-sputter-deposited TiSiN nanocomposite coating for the protection of metallic bipolar plates in proton exchange membrane fuel cells, Ceramics International
Chibin Zhang, Kangli Xia, Keya Xu, Xiaohui Lin, Shuyun Jiang, Changbao. Two-Phase Fluid Modeling of Magnetic Drug Targeting in a Permeable Microvessel Implanted with a Toroidal Permanent Magnetic Stent. Journal of Fluids Engineering, Transactions of ASME, AUGUST 2019, Vol. 141 / 081301-1-9
2018
Shuyun Jiang, Deyang Shen, Research onThermal Characteristics of Spindle System With Tilting Pad Bearing.Journal ofThermal Science and Engineering Application,Transactions of ASME. 2018,10(5):051005-051005-11.
Shuyun Jiang, Shenye Lin, A technical note: an ultra-high-speed motorized spindle for internal grinding of small-deep hole, The International Journal of Advanced Manufacturing Technology, 2018, 97(4):1457–1463
Xiaohui Lin, Shuyun Jiang, Chibin Zhang, Xiang Liu, Thermohydrodynamic Analysis of High Speed Water-Lubricated Spiral Groove Thrust Bearing Using Cavitating Flow Model, Journal of Tribology, Transactions of ASME, 2018,140 (9): 011703-1-011703-12
Xiaohui Lin, Shuyun Jiang, Chibin Zhang, Xiang Liu, Thermohydrodynamic analysis of high speed water-lubricated spiral groove thrust bearing considering effects of cavitation, inertia and turbulence, Tribology International, 2018, 119(1): 645–658
Shuyun Jiang, Shenye Lin, Chundong Xu. Static and dynamic characteristics of externally pressurized porous gas journal bearing with 4 degrees of freedom, Journal of Tribology, Transactions of ASME, 2018,140 (1): 011702-1-011702-13
Jiang Xu, Wei Liu, Shuyun Jiang, Paul Munroe, Zong-Han Xie, Enhancing the cavitation erosion resistance of D8m-Ta5Si3 nanocrystalline coatings through Al alloying, Ultrasonics - Sonochemistry 50 (2019) 138–156
Jiang Xu, Teng Teng Sun, Shuyun Jiang, Paul Munroe, Zong-Han Xie, Antimicrobial and biocorrosion-resistant MoO3 -SiO2 nanocomposite coating prepared by double cathode glow discharge technique, Applied Surface Science, 447 (2018) 500–511
徐 江, 鲍习科,蒋书运, 纳米晶Ta2N涂层在模拟人体环境中的耐蚀性能研究,金属学报，54（2018）443-456
冯慧慧 蒋书运 姬翠翠 阶梯槽织构对水润滑止推轴承静态特性的影响 表面技术2018年11期：91-96
2017
Yujiang Qiu, Shuyun Jiang. Dynamics of Flywheel Energy Storage System with Permanent Magnetic Bearing and Spiral Groove Bearing, Journal of System Dynamics, Measurement and Control, Transactions of ASME. 2017; 140(2):021006-021006-8
Hongqin Ding, Shuyun Jiang. Cavitation Erosion Resistance of Silicified Graphite by Liquid Silicon Penetration, Journal of Tribology, Transactions of ASME, 2017,139 (1): 064501-1-064501-5
Chundong Xu; Shuyun Jiang. Dynamics characteristics of a rotary table motorized spindle with externally pressurized air bearings, Journal of Vibroengineering, 2017, 3, 19(2):801-811
Shuyun Jiang, Hongqin Ding, Jiang Xu, Cavitation Erosion Resistance of Sputter-Deposited Cr3Si Film on Stainless Steel, Journal of Tribology, Transactions of ASME, 2017,139 (1): 014501-1-014501-1-5
Huihui Feng, Shuyun Jiang, Dynamics of a motorized spindle supported on water-lubricated bearings. Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, 2017, 231(3) 459–472
Huihui Feng, Shuyun Jiang, Dynamic analysis of water-lubricated motorized spindle considering tilting effect of thrust bearing. Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, 2017,10,231（20）:3780-3790
Jiang Xu, Jian Cheng, Shuyun Jiang, Paul Munroe, Zong-Han Xie. The influence of Ti additions on the mechanical and electrochemical behavior of Ta5Si3 nanocrystalline coating. Applied Surface Science, 419 (2017) 901–915
Jiang Xu, Jian Cheng, Shuyun Jiang, Paul Munroe, Zong-Han Xie. Mechanical and electrochemical properties of a sputter-deposited b-Ta5Si3 nanocrystalline coating. Journal of Alloys and Compounds, 699 (2017) 1068-1083
2016
Shuyun Jiang; Shifei Yang; Zhaoyu Yin, Static and dynamic characteristics of externally pressurized annular porous gas thrust bearings, Proceedings of the Institution of Mechanical Engineers, Part J, Journal of Engineering Tribology. OCT, 2016（230）（10期）: 1221-1230
张海波，邱玉江，蒋书运。永磁轴承承载能力分子电流模型的积分定义求解方法。机械工程学报，第52卷 第7期 2016年4月 Vol . 52 No.7 Apr. 2016：54-59
Jian Cheng, Jiang Xu, Lin Lin Liu and Shuyun Jiang. Electrochemical Corrosion Behavior of Ta2N Nanoceramic Coating in Simulated Body Fluid. Materials 2016, 9, 772:1-21
Linlin Liu, Jiang Xu and Shuyun Jiang. Nanocrystalline -Ta Coating Enhances the Longevity and Bioactivity of Medical Titanium Alloys. Metals 2016, 6, 221:1-27
Jin jin Ma, Jiang Xu, Shuyun Jiang, Paul Munroe, Zong-Han Xie. Effects of pH value and temperature on the corrosion behavior of a Ta2N nanoceramic coating in simulated polymer electrolyte membrane fuel cell environment. Ceramics International 42 (2016): 16833–16851
Lei Liu; Zhengquan Liu; Peng Huang; Ze Wu; Shuyun Jiang, Protein-induced ultrathin molybdenum disulfide (MoS2) flakes for a water-based lubricating system, RSC ADVANCES, 2016, 6 (114): 113315-113321
Lei Liu; Zhengquan Liu; Peng Huang, Novel POSS based nanohybrids for improving tribological properties of liquid paraffin, RSC ADVANCES, 2016,6 (97): 94876-94883
2015
Chundong Xu; Shuyun Jiang. Analysis of the Static Characteristics of a Self-compensation Hydrostatic Spherical Hinge. Journal of Tribology, Transactions of ASME, 2015(137): 044503-1- 044503-5
Xiaohui Lin, Shuyun Jiang. Chengyu Hua, Feng Cheng. A thermohydrodynamic coupling model of oil aeration turbulent lubrication for journal bearing with interface effect. Journal of Tribology, Transactions of ASME, 2015(137): 041705-1- 041705-11
Chundong Xu, Shuyun Jiang. Dynamic Analysis of a Motorized Spindle with Externally Pressurized Air Bearings. Journal of Vibration and Acoustics, Transactions of ASME, 2015(137): 041001-1- 041001-16
Chundong Xu; Shuyun Jiang. Analysis of static and dynamic characteristic of hydrostatic spherical hinge. Journal of Tribology, Transactions of ASME, 2015(137):021701-1- 021701-7
2014
Shuyun Jiang, Hongchang Wang, Shaobo Wen. Flywheel energy storage system with a permanent magnet bearing and a pair of hybrid ceramic ball bearings, Journal of Mechanical Science and Technology2014, 28 (12): 5043-5053
Feng Cheng, Shuyun Jiang. Cavitation erosion resistance of diamond-like carbon coating onstainless steel. Applied Surface Science. 2014 (292):16– 26
Lei Wang, Shuyun Jiang. Centrifugal effects on the dynamic characteristics of high speed hydrostatic thrust bearing lubricated by low viscosity fluid. Proceedings of the Institution of Mechanical Engineers, Part J, Journal of Engineering Tribology. 2014, 228(8):860–871
LIN XiaoHui, ZHANG ChiBin, GU Jun, JIANG ShuYun ,YANG JueKuan, Poisson-Fokker- Planck model for biomolecules translocation through nanopore driven by electroosmotic flow. SCIENCE CHINA（中国科学） Physics, Mechanics & Astronomy 2014(10) 57 No. 11: 2104–2113
2013
Feng Cheng; Shuyun Jiang; Jun Liang. Cavitation erosion resistance of microarc oxidation coating on aluminium alloy. Applied Surface Science 2013 (280) 9: 287-296
HuihuiFeng, Shuyun Jiang. Multicriteria design of a rotary table with a hybrid constant flow and constant pressure supply system. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2013 (227) 10: 1165-1176
Lin, XH (Lin Xiaohui) ; Zhang, CB (Zhang Chibin) ; Yang, JK (Yang Juekuan) ; Jiang, SY (Jiang Shuyun) ; Ren, WS (Ren Weisong) ; Gu, J (Gu Jun). Nanofluids Transport Model Based on Fokker-Planck Equation and the Convection Heat Transfer Calculation. CHINESE JOURNAL OF MECHANICAL ENGINEERING 2013年26 卷 6期1277-1284页
2012
Shaobo Wen, Shuyun Jiang, Optimum Design of Hybrid Composite Multi-ring Flywheel Rotor Based on Displacement Method, Composites Science and Technology,2012 (72): 982–988
LIN Xiaohui, CHEN Haiquan, JIANG Shuyun & ZHANG Chibin. A coulomb explosion theoretical model of femtosecond laser ablation materials，SCIENCE CHINA（中国科学），Technological Sciences 2012 (55) No.2: 1–8
林晓辉, 张赤斌, 马传浩, 陈海全, 蒋书运 纳米流体在圆管中输运的两相流理论模型及黏度计算 中国科学: 物理学 力学 天文学 2012(42) 6: 647–656
2011
Shuyun Jiang, Hebing Mao. Investigation of the High Speed Rolling Bearing Temperature Rise with Oil-air Lubrication. Journal of Tribology, Transactions of ASME, 2011 (133): 021101-1-021101-9
Shuyun Jiang, Hongjun Xie. Tribological behavior of plasma-spray TiO2 coating against metallic bearing materials under oil lubrication. Proceedings of the Institution of Mechanical Engineers, Part J, Journal of Engineering Tribology, 2011(225): 128-138
Shuyun Jiang, Hongjun Xie. Synergistic effect of diisopropyl phosphite and ultra alkaline calcium sulfonate additives on tribological properties of AISI 52100 steel/Al2O3 ceramics. Lubrication Science. 2011(23) :279-291
Shuyun Jiang, Hongjun Xie.Synergistic effect of diisopropyl phosphite and ashless organic ammonium phosphate salt additives on tribological properties of AISI 52100 steel/Al2O3 ceramics. Proceedings of the Institution of Mechanical Engineers, Part J, Journal of Engineering Tribology, 2011(225):263-275
Shuyun Jiang, Xiang Min, Thermal design of the vertical machining center headstock by the forcedcooling method. Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, 2011(225): 773-780
Xiang Min, Shuyun Jiang. A thermal model of the ball screw feed drive system for machine tool, Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, 2011(225):186-193
Jiang Xu, Linlin Liu, Shuyun Jiang. Effect of carbon doping on electrochemical behaviour of nanocrystalline Ti5Si3 film in NaCl solution, Electrochemistry Communications. 2011（1）:102-105
Xu, J ; Zhuo, CZ ; Han, DZ ; Tao, J ; Liu, LL ; Jiang, SYEffect of nano-Al(2)O(3) on erosion-corrosion behaviour of composite alloying layer under two phase flow conditions. Corrosion Engineering Science and Technology 2011(46): 285-295
2010年
Shuyun Jiang, Yunjian Zheng. A contact stiffness model of machined joint surfaces, Journal of Tribology, Transactions of ASME, 2010 (132):011401-1
011401-7
Shuyun Jiang, Shufei Zhen. Dynamic design of a high speed motorized spindle-bearing system, Journal of Mechanical Design, Transactions of ASME, 2010（131）:034501-1
034501-5
Shuyun Jiang, Shufei Zheng, A modeling approach for analysis and improvement of spindle-drawbar-bearing assembly dynamics. International Journal of Machine Tools and Manufacture, 2010（50）: 131
142
Shuyun Jiang, Hebing Mao, Investigation of variable optimum preload for a machine tool spindle, International Journal of Machine Tools and Manufacture, 2010（50）：19
28
Shuyun Jiang, Yunjian Zheng, Analytical model of thermal contact resistance based on Weierstrass-Mandelbrot (W-M) fractal function. Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, 2010(224): 959-967
Shuyun Jiang, Yufei Liang, A simplified calculating method of axial force for permanent magnetic bearing. Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, 2010(224): 703-708
Shuyun Jiang, Shifei Yang. Synergistic effect of diisopropyl phosphite and triphenyl thiophosphate additives on tribological properties of T8 Steel/Al2o3 ceramics, Wear, 2010（258）: 777-783
蒋书运，祝书龙。带滚珠丝杠副直线导轨副动态特性参数分析。机械工程学报。2010, (46)2:92-98
Jiang Xu, Yue Wang and Shuyun Jiang. The effects of substitution of Cr for Mo on the mechanical properties of nanocrystalline Mo5Si3 films. Nanoscale. 2010(1) ：394-398
Chenghou Zhou, Jiang Xu, Shuyun Jiang.Reactive sputter deposition of alumina films on magnesium alloy by double cathode glow-discharge plasma technique.Materials Characterization, 2010 (61): 249 – 256
Jiang Xu, Shuyun Jiang, and Yue Wang. Influence of chromium alloying on the cyclic oxidation behavior of nanocrystalline (MoxCr1-x)5Si3 films at 800 °C in air. ACSApplied Materials and Interfaces. 2010 (2): 301-311
Jiang Xu, Chenghou Zhou, Shuyun Jiang，Investigation on corrosion behavior of sputter-deposited nanocrystalline (MoxCr1_x)5Si3 films by double cathode glow plasma. Intermetallics, (2010)18：1669-1675
Jiang Xu, Chenghou Zhou, Zhaofeng Chen，Yue Wang, Shuyun Jiang，Corrosion behaviors of (Cr,Fe)3Si/Cr13Fe5Si2 composite coating under condition of synergistic effects of electrochemical corrosion and mechanical erosion，Journal of Alloys and Compounds，2010（496）：429-432
2010年以前
Hongchang Wang, Shuyun Jiang, Zupei Shen. The dynamic analysis of an energy storage flywheel system with hybrid bearing support. Journal of Vibration and Acoustics, Transactions of ASME, 2009(131): 051006-1~051006-10
王洪昌, 蒋书运, 梁玉飞。 基于分子电流法轴向永磁轴承轴向刚度的分析。机械工程学报。 2009 (45),5:102-107
Zheng Shufei, Jiang Shuyun. An improved finite difference method for the pressure distribution of aerostatic bearing. Journal of Southeast University, 2009, 25(4): 501-505
Jiang Xu, Jian Sun, Shuyun Jiang, Mechanical properties of sputter-deposited nanocrystalline Cr3Si film, Materials Letters, 2009(63):1082-1084
Xiaohui Lin, Juekuan Yang, Yuanzheng Sun, Shuyun Jiang. Ultra-short laser ablation of dielectrics: Theoretical analysis of threshold damage fluence and ablation depth. Applied Surface Science, 2009 (256):130–135
Jiang Xu, Chengzhi Zhuo, Jie Tao, Shuyun Jiang, Improving the corrosion wear resistance of AISI 316L stainless steel by particulate reinforced Ni matrix composite alloying layer, Journal of Physics D: Applied Physics, 2009(42)：015410-015417
Jiang Xu, Chenzhi Zhuo, Dezhong Han, JieTao, Linlin Liu, Shuyun Jiang, Erosion-corrosion behaviour of nano-particle-reinforced Ni matrix composite alloying layer by duplex surface treatment in aqueous slurry environment, Corrosion Science, 2009, (51)5:1055-1068
Jiang Xu, Zheyuan Chen, Jie Tao, Shuyun Jiang, Corrosion behavior of amorphous/ nanocrystalline Al-Cr-Fe film deposited by double glow plasmas technique, Science in China（中国科学）Series E: Technological Sciences, 2009 (52), 2: 1-9
徐江，卓城之，蒋书运。纳米颗粒对Ni基复合镀渗层耐冲蚀性能的影响。物理化学学报。2009 (25),10：1958-1966
Jiang Xu, Jie Tao, Shuyun Jiang, Investigation on corrosion and wear behaviors of nanoparticles reinforced Ni-based composite alloying layer, Applied Surface Science, 2008 (254),13: 4036-4043
Jiang Xu, Jie Tao, Shuyun Jiang, Microstructure and properties of nano-Al2O3 particle reinforced Ni-Cr-Mo-Cu composite alloying layer, Materials Chemistry and Physics, 2008(112) : 966–972
Jiang Xu, Chenzhi Zhuo, Jie Tao, Shuyun Jiang, The effect of second-phase on the corrosion and wear behaviors of composite alloying layer, Applied Surface Science, 2008(255):2688–2696
Jiang Xu, yangLi Zheng, Jie Tao, Chenzhi Zhuo, Shuyun Jiang, The study of high temperature behaviors of brush plating Ni/ nano-SiO2 composite coating, Surface Review and Letters, 2008(15)5: 641-651.
Xu Min, Jiang Shuyun, Cai Ying. An improved thermal model for machine tool bearings. International Journal of Machine Tools and Manufacture. 2007 (47):53-62
吕慎刚，蒋书运。电磁轴承μ鲁棒控制。机械工程学报。2007,43(1)：133 138
Jiang Xu, Jie Tao, Zheyuan Chen, Wenhui Zhu, Shuyun Jiang and Zhong Xu .Preparation of Ni–Cu–Mo–Cr film deposited on AZ31magnesium alloy by double glow sputtering with Cu interlayer. Surface and Coatings Technology, 2007 (202)5:577-582
Jiang Shuyun, Ju Lihua. Study on electromechanical coupling nonlinear vibration of flywheel energy storage system. Science in China: Series E，2006 (49)1:61-77
鞠立华，蒋书运。飞轮储能系统机电耦合非线性动力学分析。中国科学 E辑 2006, 36(1): 68 83
蒋书运。T8钢/Al2O3陶瓷副极压抗磨减摩剂复配协同效应研究。机械工程学报。2004,40(4):119-122
京公网安备 11010802027423号