近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Qiang Li*, Suwei Ma, Mingxia Feng, Hong Lei, Zongshu Zou. Energy Efficiency Characterization and Optimization of Mechanical Stirring Multiphase Dispersion Processes: Applied to Kanbara Reactors for Hot Metal Desulfurization, Journal of Materials Research and Technology. 2023, 23, 5642-5659.
Qiang Li*, P.C. Pistorius. Large bubble-resolved direct numerical simulation for multiphase flow applied to gas-stirred ladles: Grid resolution and plug eccentricity effects. Metallurgical and Materials Transactions B, 2023, 54, 1290–1313. (https://doi.org/10.1007/s11663-023-02762-z)
Qiang Li*, Ran Tang, Shuai Wang, Zongshu Zou. A coupled LES-LBM-IMB-DEM modeling for evaluating pressure drop of a heterogeneous alternating-layer packed bed. Chemical Engineering Journal, 2022. 433, 133529. (https://doi.org/10.1016/j.cej.2021.133529), IF = 16.744.
Qiang Li*, Suwei Ma, Zongshu Zou. Droplet-Resolved Modeling on Dispersion Kinetics of Desulfurization Flux in a Mechanically Agitated Ladle for Hot Metal Treatment. Metallurgical and Materials Transactions B, 2022, 53, 3648-67. (https://doi.org/10.1007/s11663-022-02627-x)
Qiang Li*, Suwei Ma, Xiaoyang Shen, Zongshu Zou. Computational Evaluation of Flow-Induced Abrasion of Blade and Ladle in Kanbara Reactors for Hot Metal Desulfurization. JOM, 2022, 74, 1588–1600. (https://doi.org/10.1007/s11837-021-05120-z)
Qiang Li*, Zijia Wang, Shuai Wang, Mingming Li, Hong Lei, Zongshu Zou. A Deep Learning-Based Diagnosis Model Driven by Tuyere Images Big Data for Iron-Making Blast Furnace. Steel Research International, 2022, 93(10), 2100826. (https://doi.org/10.1002/srin.202100826).
Qiang Li*, Shuai Guo, Shuai Wang, Zongshu Zou. CFD-DEM Investigation on Pressure Drops of Heterogeneous Alternative-Layer Particle Beds for Low-Carbon Operating Blast Furnaces.Metals, 2022, 12(9), 1507. (https://doi.org/10.3390/met12091507)
Qiang Li*, P.C. Pistorius. Interface-Resolved Simulation of Bubbles-Metal-Slag Multiphase System in a Gas-Stirred Ladle. Metallurgical and Materials TransactionsB, 2021, 52(3), 1532-1549.
Qiang Li*, P.C. Pistorius. Toward Multiscale Model Development for Multiphase Flow: Direct Numerical Simulation of Dispersed Phases and Multiscale Interfaces in a Gas-Stirred Ladle. JOM, 2021, 73, 2888-2899. 封面论文(https://doi.org/10.1007/s11837-021-04806-8)
Qiang Li*, Xiaoyang Shen, Shuai Guo, Mingming Li, Zongshu Zou. Computational Investigation on Effect of Impeller Dimension on Fluid Flow and Interface Behavior for Kanbara Reactor Hot Metal Treatment. Steel Research International, 2021, 92 (11), 2100239. (https://doi.org/10.1002/srin.202100239)
Qiang Li*, Suwei Ma, Xiaoyang Shen, Mingming Li, Zongshu Zou. Effects of Impeller Rotational Speed and Immersion Depth on Flow Pattern, Mixing and Interface Characteristics for Kanbara Reactors Using VOF-SMM Simulations. Metals, 2021,11(10), 1596. (https://doi.org/10.3390/met11101596)
Qiang Li, Mingming Li*, S.B. Kuang, Zongshu Zou. Understanding Characteristic of Abrasion of Refractory Lining Caused by Bath Oscillation in BOF Steelmaking. JOM, 2016, 68(12), 3126-3133. (https://doi.org/10.1007/s11837-016-2078-8)
Qiang Li*, Mingming Li, Shibo Kuang, Zongshu Zou. Numerical Simulation of the Interaction Between Supersonic Oxygen Jets and Molten Slag–Metal Bath in Steelmaking BOF Process. Metallurgical and Materials TransactionsB, 2015, 46(3), 1494-1509. (https://doi.org/10.1007/s11663-015-0292-3)
Qiang Li*, Mingming Li, S.B. Kuang, Zongshu Zou. Computational study on the behaviours of supersonic jets and their impingement onto molten liquid free surface in BOF steelmaking. Canadian Metallurgical Quarterly, 2014, 53(3), 340-351. (https://doi.org/10.1179/1879139514Y.0000000124)
Qiang Li*, Mingxia Feng, Zongshu Zou. Validation and Calibration Approach for Discrete Element Simulation of Burden Charging in Pre-reduction Shaft Furnace of COREX Process, ISIJ International, 2013, 53(8): 1366-1371. (https://doi.org/10.2355/isijinternational.53.1365)
Shifu Chen, Hong Lei*, Qiang Li, Changyou Ding, Weixue Dou, Lishan Chang. Effect of Nonequilibrium Decarburization on Inclusion Transfer During Single Snorkel RH Vacuum Refining. JOM, 2022 (https://doi.org/10.1007/s11837-022-05182-7)
Changyou Ding, Hong Lei*, Hong Niu, Han Zhang, Bin Yang, Qiang Li. Effects of Tracer Solute Buoyancy on Flow Behavior in a Single-Strand Tundish. Metallurgical and Materials Transactions B, 2021, 52, 3788-3804. (https://doi.org/10.1007/s11663-021-02292-6)
Mingming Li*, Lei Shao, Qiang Li, Zongshu Zou. A Numerical Study on Particle-Induced Erosion to Laval Nozzle in Powder-Oxygen Injection Using BOF Lance. JOM, 2021, 73, 2946-2952.
Mingming Li*, Lei Shao, Qiang Li, Zongshu Zou. A Numerical Study on Blowing Characteristics of a Dynamic Free Oxygen Lance Converter for Hot Metal Dephosphorization Technology Using a Coupled VOF-SMM Method. Metallurgical and Materials Transactions B, 2021, 52, 2026-2037. (https://doi.org/10.1007/s11663-021-02155-0)
Mingming Li*, Lin Li, Lei Shao, Qiang Li, Zongshu Zou, Baokuan Li. Numerical Analysis of the Particle Dynamics in a Supersonic Gas Stream with a Modified Point-Particle Euler–Lagrange Approach. Metallurgical and Materials Transactions B, 2021, 52, 1034-1051.
Mingming Li*, Lin Li, Bo Zhang, Qiang Li, Wei Wu, Zongshu Zou. Numerical Analysis of the Particle-Induced Effect on Gas Flow in a Supersonic Powder-Laden Oxygen Jet. Metallurgical and Materials Transactions B, 2020, 51, 1718-1730.
Lin Li, Mingming Li*, Lei Shao, Qiang Li, Zongshu Zou. Physical and Mathematical Modeling of Swirling Gas Jets Impinging onto a Liquid Bath Using a Novel Nozzles-Twisted Lance. Steel Research International, 2020, 91(7), 1900684.
Mingming Li*, Qiang Li, Zongshu Zou, Baokuan Li. Characterization of Cavity Oscillation and Splashing Distribution Under Excitation by Bottom Gas Blowing in a Steelmaking Converter. JOM, 2019, 71, 729–736. (https://doi.org/10.1007/s11837-018-3203-7)
Mingming Li, Lin Li, Qiang Li*, Zongshu Zou. Modeling of Mixing Behavior in a Combined Blowing Steelmaking Converter with a Filter-Based Euler–Lagrange Model. JOM, 2018, 70, 2051–2058. (https://doi.org/10.1007/s11837-018-2889-x)
Peng Zhao, Qiang Li*, S. B. Kuang*, Zongshu Zou. LBM-LES Simulation of the Transient Asymmetric Flow and Free Surface Fluctuations under Steady Operating Conditions of Slab Continuous Casting Process. Metallurgical and Materials Transactions B, 2017, 48, 456–470 (https://doi.org/10.1007/s11663-016-0830-7)
Mingming Li, Qiang Li*, Zongshu Zou, Xizhong An. Computational Investigation of Swirling Flow Generated by a Supersonic Jets Lance with Twist Nozzles. Metallurgical and Materials Transactions B, 2017, 48, 713–725. (https://doi.org/10.1007/s11663-016-0851-2)
Peng Zhao, Qiang Li*, Shi Bo Kuang and Zongshu Zou. Mathematical Modeling of Liquid Slag Layer Fluctuation and Slag Droplets Entrainment in a Continuous Casting Mold Based on VOF-LES Method. High Temperature Materials and Processes, 2017, 36(5), 551-565. (https://doi.org/10.1515/htmp-2016-0143)
Mingming Li, Qiang Li*, Shibo Kuang, and Zongshu Zou. Computational Investigation of the Splashing Phenomenon Induced by the Impingement of Multiple Supersonic Jets onto a Molten Slag–Metal Bath. Industrial & Engineering Chemistry Research, 2016, 55(12) 3630–3640.
Mingming Li, Qiang Li*, Shibo Kuang & Zongshu Zou. Determination of Cavity Dimensions Induced by Impingement of Gas Jets onto a Liquid Bath. Metallurgical and Materials Transactions B,2016, 47, 116–126. (https://doi.org/10.1007/s11663-015-0490-z)
Mingming Li, Qiang Li*, Shibo Kuang, Zongshu Zou. Transferring Characteristics of Momentum/Energy during Oxygen Jetting into the Molten Bath in BOFs: A Computational Exploration. Steel Research International, 2015, 87(3), 288-300. 封面论文(https://doi.org/10.1002/srin.201500034)
Yibo He, Biao Tang, Qiang Li, Zongshu Zou. A Comprehensive Static Model of an Iron Bath Smelting Reduction Process with Thick Slag for Alumina-Rich Iron Ore. ISIJ International, 2015, 55(10), 2125-2134. (https://doi.org/10.2355/isijinternational.ISIJINT-2015-255)
Bingnan Liu, Qiang Li*, Zongshu Zou, Aibing Yu. Theoretical Evaluation on Merits of the Processes of Gas-Based Shaft Furnace with Top Gas Recycling. Steel Research International, 2015, 87(5), 653-661. (https://doi.org/10.1002/srin.201500190)
Mingming Li, Qiang Li*, S. B. Kuang, Zongshu Zou. Coalescence Characteristics of Supersonic Jets From Multi-Nozzle Oxygen Lance in Steelmaking BOF. Steel Research International, 2015, 86(12), 1517-1529. (https://doi.org/10.1002/srin.201400506)
Mingming Li, Qiang Li*, Lin Li, Yibo He, Zongshu Zou. Effect of operation parameters on supersonic jet behaviour of BOF six-nozzle oxygen lance. Ironmaking & Steelmaking, 2014, 41(9), 699-709. (https://doi.org/10.1179/1743281213Y.0000000154)
Wei Zhang, J.H. Zhang, Zongshu Zou*, Qiang Li, Yuanhong Qi. Influences of non-stoichiometry on thermodynamics and kinetics of iron oxides reduction processes. Ironmaking & Steelmaking, 2014, 41(9), 715-720. (https://doi.org/10.1179/1743281213Y.0000000167)
Bingnan Liu, Qiang Li*, Zongshu Zou, Aibing Yu. Discussion on chemical energy utilisation of reducing gas in reduction shaft furnace. Ironmaking & Steelmaking, 2014, 41(8), 568-574.
Zuoliang Zhang, Qiang Li, Zongshu Zou*. Reduction properties of high alumina iron ore cold bonded pellet with CO–H2 mixtures. Ironmaking & Steelmaking, 2014, 41(8), 561-567.
京公网安备 11010802027423号