近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
1.Li Yushuo, DongYanwu, Jiang Zhouhua, et al. Optimizing the Hot Deformation Microstructure of GH4975 Superalloy by Sup-solvus Temperature Holding Followed by Extremely Slow Cooling[J]. Metals and Materials International, 2023, DOI10.1007/s12540-023-01570-z
2.Du Yaoxin, Dong Yanwu, Jiang Zhouhua, Stovpchenko Ganna, Li Yushuo, Huang Jun, Wang Xinwei, Liu Yuxiao. Dissolution kinetics and reaction mechanism of Al2O3 in molten CaF2-CaO-Al2O3 slag[J]. Journal of Iron and Steel Research, International, 2023, DOI10.1007/s42243-023-01112-2
3.Qi Wang , Yanwu Dong, Zhouhua Jiang, Jun Huang. Enhancing low thermal expansion behavior and strength via induced Zr-rich intermetallic phase in Fe-36Ni Invar alloy[J]. Materials & Design, 2023, 226, 111644
4.Li Yushuo, Dong Yanwu, Jiang Zhouhua, Tang Qingfei, Du Shuyang, Hou Zhiwen. Influence of rare earth Ce on hot deformation behavior of as-cast Mn18Cr18N high nitrogen austenitic stainless steel[J]. International Journal of Minerals Metallurgy and Materials, 2023, 30(2): 324-334.
5.Medovar Lev, Stovpchenko Ganna, Lisova Liudmila, Jiang Zhouhua, Dong Yanwu, Kang Congpeng. Features and restrictions of electroslag remelting with silica-bearing slags for lightweight high manganese steel[J]. Steel Research International, 2023, 94(11): 2300161
6.Yao, Kean, Dong Yanwu, Jiang Zhouhua, Wang Yong, Li Yushuo, Du Shuyang. Effect of Magnesium Treatment on Cleanliness, Microstructure, and Magnetic Properties of Fe-80Ni Permalloy[J]. Steel Research International, 2023, 94(12): 2300179
7.Liu Yuxiao, Dong Yanwu, Jiang Zhouhua, Li Yushuo, Zh Wei, Du Yaoxin, Du Shuyang. XGBoost-based model for predicting hydrogen content in electroslag remelting[J]. Journal of Iron and Steel Research International, 2023, 30(5): 887-896.
8.Wang Qi, Dong Yanwu, Jiang Zhouhua, Huang Jun. Effects of trace additions of magnesium on microstructure and properties of Fe-36Ni invar alloy[J]. Steel Research International, 2023, 94(8): 2300047
9.Hou Zhiwen, Dong Yanwu, Jiang Zhouhua, Hu Zhihao, Liu Limeng and Tian Kunjie. Effect of an external magnetic field on improved electroslag remelting cladding process[J]. International Journal of Minerals Metallurgy and Materials, 2022, 29(8): 1511-1521.
10.Hou Zhiwen, Dong Yanwu, Jiang Zhouhua, Medovar Lev, Stovpchenko, Ganna, Zou Tao, Huang Jun, Wang Xinwei, Dong Junwei. Interface bonding mechanism and heat treatment of the composite roll manufactured by electroslag remelting cladding method[J]. Journal of Materials Research and Technology-JMR&T[J]. 2022, 19: 4115-4127.
11.Li Yushuo, Dong Yanwu, Jiang Zhouhua, Yao Kean, Du Shuyang, Liu Yuxiao and Hou Zhiwen. Study on microsegregation and homogenization process of a novel nickel-based wrought superalloy[J]. Journal of Materials Research and Technology-JMR&T[J]. 2022, 19: 3366-3379.
12.Cao Yulong, Zhao Zhengrong, Wan Xiangliang, Li Guangqiang, Jiang Zhouhua and Dong Yanwu. Carbide Characteristics of High Vanadium High-speed Steel Manufactured by Electroslag Remelting[J]. ISIJ International, 2022, 62(7): 1430-1438.
13.Cao Yulong, Li Jiawei, Li Guangqiang, DongYanwu and Jiang Zhouhua. Effect of Conductive Circuits on Bonding Quality of Bimetallic Composite Roll Produced by Electroslag Remelting Cladding[J]. JOM, 2021, 73(10): 2973-2984.
14.Cao Yulong, Dong Yanwu, Li Guangqiang, Jiang Zhouhua and Zhao Zhengrong. Solid-state phase transformation of ductile cast iron during electroslag remelting cladding[J]. International Journal of Cast Metals Research, 2021, 34(3-6): 111-119.
15.Hou Zhiwen, Dong Yanwu, Jiang Zhouhua, Liu Limeng, Du Shuyang and Hu Zhihao. Effect of Current-Carrying Mold Current on Multi-physics Fields and Interface Bonding Quality of Compound Rolls[J]. Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 2021, 52(5): 3332-3345.
16.Cao Yulong, Dong Yanwu, Jiang Zhouhua, Li Guangqiang, Zhao Zhengrong. Characteristics of High Speed Steel/ductile Cast Iron Composite Roll Manufactured by Electroslag Remelting Cladding[J]. ISIJ International, 2021, 61(7): 2127-2134.
17.Hou Zhiwen, Dong Yanwu, Jiang Zhouhua, Yao Kean, Li Yushuo, Cao Yulong. Transient Simulations and Experiments on Compound Roll Produced by Electroslag Remelting Cladding[J]. Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 2021, 52(2): 598-610.
18.Cao Yulong, Li Guangqiang, Jiang Zhouhua, Dong Yanwu, Zhao Zhengrong, Niu Chenrui. Effect of Electrode Immersion Depth on the Electrical Resistance and Heat Generation in the Electroslag Remelting Process[J]. JOM, 2020, 72(11): 3826-3835.
19.Cao Yulong, Li Guangqiang, Jiang Zhouhua, Dong Yanwu, Zhao Zhengrong, Niu Chenrui. Interface Characteristics of GCr15/45 Carbon Steel Composite Billet Produced by Electroslag Remelting Cladding[J]. Materials Transactions, 2020, 61(11): 2228-2235.
20.Cao Yulong, Li Guangqiang, Jiang Zhouhua, Dong Yanwu, Zhao Zhengrong, Niu Chenrui. Microstructure evolution of roll core during the preparation of composite roll by electroslag remelting cladding technology[J]. High Temperature Materials and Processes, 2020, 39(1): 270-280.
21.Cao Yulong, Jiang Zhouhua, Dong Yanwu, Li Guangqiang, Hou Zhiwen, Wang Qiang. Research on the bimetallic composite roll produced by a new electroslag cladding method: microstructure and property of the bonding interface[J]. Ironmaking & Steelmaking, 2020, 47(6): 686-692.
22.Gong Wei, Jiang Zhouhua, Zhang Lixiang, Chen Changyong, Dong Yanwu. Influence of Mg addition on inclusions and mechanical properties of Cr12Mo1V1 steel under high pressure[J]. Materials Science And Engineering A-Structural Materials Properties Microstructure and Processing, 2020, 791(7): 139410.
23.Cao Haibo, Jiang Zhouhua, Dong Yanwu, Liu Fubin, Hou Zhiwen, Yao Kean, Yu Jia. Effect of Single Power Two Circuits Electroslag Remelting Process on the Cleanliness of the Remelted Ingot[J]. ISIJ International, 2020, 60(2): 247-257.
24.Wang Anguo, Jiang Zhouhua, Lou Yanchun, Tang Ji, Xiong Yunlong, Dong Yanwu, Liu Fubin, Cheng, Jingchang, Chen Rui. Up-pulling force analysis for ESC hollow cylindrical casting[J]. China Foundry, 2020, 17(1): 48-55.
25.Haibo Cao, Zhouhua Jiang, Yanwu Dong, Fubin Liu, Yulong Cao, Zhiwen Hou, Kean Yao, Mingxiang Xu. Effect of Single Power Two Circuits Electroslag Remelting Process on the Ingot Solidification Quality[J]. Steel Research International, 2019, 90(2): 1800337
26.Yanwu Dong, Zhiwen Hou, Zhouhua Jiang, Haibo Cao, Qianlong Feng, Yulong Cao. Study of a Single-Power Two-Circuit ESR Process with Current-Carrying Mold: Mathematical Simulation of the Process and Experimental Verification[J]. Metallurgical and Materials Transactions B, 2018, 49(1): 349-360.
27.Zhiwen Hou, Yanwu Dong, Zhouhua Jiang, Xin Deng, Yulong Cao, Haibo Cao, Lev Medovar and Ganna Stovpchenko. Simulation of Compound Rolls Produced by Electroslag Remelting Cladding Method[J]. Metals, 2018, 8(7): 504
28.Haibo Cao, Zhouhua Jiang, Yanwu Dong, Fubin Liu, Yulong Cao, Zhiwen Hou, Kean Yao, Mingxiang Xu. Effect of Single Power Two Circuits Electroslag Remelting Process on the Ingot Solidification Quality[J]. Steel Research International, 2019, 90(2): 1800337
29.Yulong Cao, Zhouhua Jiang, Yanwu Dong, Xin Deng, Lev Medovar, Ganna Stovpchenko. Research on the Bimetallic Composite Roll Produced by an Improved Electroslag Cladding Method: Mathematical Simulation of the Power Supply Circuits, ISIJ International, 2018, 58(6): 1052-1060.
30.Yulong Cao, Zhouhua Jiang, Yanwu Dong, Xin Deng, Lev Medovar, Ganna Stovpchenko. Research on the Bonding Interface of High Speed Steel/Ductile Cast Iron Composite Roll Manufactured by an Improved Electroslag Cladding Method[J]. Metals, 2018, 8(6): 390
31.Dong Hou, Fubin Liu, Tianpeng Qu, Zhouhua Jiang, Deyong Wang, Yanwu Dong. Behavior of Alloying Elements during Drawing-Ingot-Type Electroslag Remelting of Stainless Steel Containing Titanium[J]. ISIJ International, 2018, 58(5): 876-885.
32.Dong Hou, Zhouhua Jiang, Yanwu Dong, Wei Gong, Yulong Cao, Haibo Cao. Effect of Slag Composition on the Oxidation Kinetics of Alloying Elements during Electroslag Remelting of Stainless Steel: Part-1 Mass-transfer Model, ISIJ International, 2017, 57(8): 1400-1409.
33.Dong Hou, Zhouhua Jiang, Yanwu Dong, Wei Gong, Yulong Cao, Haibo Cao. Effect of Slag Composition on the Oxidation Kinetics of Alloying Elements during Electroslag Remelting of Stainless Steel: Part-2 Control of Titanium and Aluminum Content, ISIJ International, 2017, 57(8): 1410-1419.
34.Dong Hou, Zhouhua Jiang, Yanwu Dong, Yang Li, Wei Gong, Fubin Liu. Mass transfer model of desulfurization in the electroslag remelting process, Metallurgical and Materials Transactions B, 2017, 48(3): 1885-1897.
京公网安备 11010802027423号