Shen, Yansong - University of New South Wales - School of Chemical Engineering

个人简介

BEng School of Materials and Metallurgy (Top Student Class) 1996-2001 Northeastern University, Shenyang, China MEng School of Materials and Metallurgy 2001-2003 Northeastern University, Shenyang, China PhD School of Materials Science and Engineering 2004-2009 The University of New South Wales, Sydney, Australia

研究领域

Low Carbon Smart Process Metallurgy Solid fuels Fluidisation technology Water treatment Hydrogen Energy Recycling technology

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Hu Y; Zhou H; She X; Kou M; Wu S; Zhang Z; Shen Y, 2022, 'Numerical Simulation of Combustion Characteristics in the Dome Zone of the COREX Melter-Gasifier: The Effect of Rising Gas', Industrial and Engineering Chemistry Research, vol. 61, pp. 931 - 941, http://dx.doi.org/10.1021/acs.iecr.1c03774 Jin X; Chandratilleke GR; Wang S; Shen Y, 2022, 'DEM investigation of mixing indices in a ribbon mixer', Particuology, vol. 60, pp. 37 - 47, http://dx.doi.org/10.1016/j.partic.2021.03.005 Jin X; Wang S; Shen Y, 2022, 'DEM study of mixing behaviours of cohesive particles in a U-shaped ribbon mixer', Powder Technology, vol. 399, http://dx.doi.org/10.1016/j.powtec.2021.117097 Jin X; Wang S; Shen Y, 2022, 'DEM study of the effect of impeller design on mixing performance in a U-shape ribbon mixer', Advanced Powder Technology, vol. 33, http://dx.doi.org/10.1016/j.apt.2021.10.026 Kang B; Shen Y; Zhu D; Ziveyi J, 2022, 'Valuation of guaranteed minimum maturity benefits under generalised regime-switching models using the Fourier Cosine method', Insurance: Mathematics and Economics, vol. 105, pp. 96 - 127, http://dx.doi.org/10.1016/j.insmatheco.2022.03.012 Li CX; Dong KJ; Liu SD; Chandratilleke GR; Zhou ZY; Shen YS, 2022, 'DEM study of particle segregation in the throat region of a blast furnace', Powder Technology, vol. 407, http://dx.doi.org/10.1016/j.powtec.2022.117660 Li S; Shen Y, 2022, 'An approach to simulate gas-solid flow systems with process controllers', Chemical Engineering Journal, vol. 429, http://dx.doi.org/10.1016/j.cej.2021.132443 Li S; Shen Y, 2022, 'Numerical simulation of multiphase flow in a full coal-direct chemical looping combustion process', Chemical Engineering Science, vol. 248, http://dx.doi.org/10.1016/j.ces.2021.117233 Liu Y; Shen Y, 2022, 'HMB-CFD study of oxygen-enriched pulverised coal combustion in an ironmaking blast furnace', Powder Technology, vol. 407, http://dx.doi.org/10.1016/j.powtec.2022.117610 Liu Y; Zhang H; Shen Y, 2022, 'A data-driven approach for the quick prediction of in-furnace phenomena of pulverized coal combustion in an ironmaking blast furnace', Chemical Engineering Science, vol. 260, pp. 117945 - 117945, http://dx.doi.org/10.1016/j.ces.2022.117945 Song S; Rong L; Dong K; Liu X; Le-Clech P; Shen Y, 2022, 'Pore-scale numerical study of intrinsic permeability for fluid flow through asymmetric ceramic microfiltration membranes', Journal of Membrane Science, vol. 642, pp. 119920 - 119920, http://dx.doi.org/10.1016/j.memsci.2021.119920 Song S; Rong L; Dong K; Shen Y, 2022, 'Numerical study of the hydraulic tortuosity for fluid flow through elliptical particle packings', Powder Technology, vol. 398, pp. 117047 - 117047, http://dx.doi.org/10.1016/j.powtec.2021.117047 Song S; Wang S; Le-Clech P; Shen Y, 2022, 'LBM-DEM simulation of particle deposition and resuspension of pre-deposited dynamic membrane', Powder Technology, vol. 407, pp. 117637 - 117637, http://dx.doi.org/10.1016/j.powtec.2022.117637 Wang S; Shen Y, 2022, 'Coarse-grained CFD-DEM modelling of dense gas-solid reacting flow', International Journal of Heat and Mass Transfer, vol. 184, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2021.122302 Wang S; Shen Y, 2022, 'Particle-scale modelling of the pyrolysis of end-of-life solar panel particles in fluidized bed reactors', Resources, Conservation and Recycling, vol. 183, pp. 106378 - 106378, http://dx.doi.org/10.1016/j.resconrec.2022.106378 Wang S; Shen Y, 2022, 'Super-quadric CFD-DEM simulation of chip-like particles flow in a fluidized bed', Chemical Engineering Science, vol. 251, http://dx.doi.org/10.1016/j.ces.2022.117431 Wu C; Zhuo Y; Xu X; Farajzadeh E; Dou J; Yu J; Shen Y; Zhang Z, 2022, 'A combined experimental and numerical study of coal briquettes pyrolysis using recycled gas in an industrial scale pyrolyser', Powder Technology, vol. 404, pp. 117477 - 117477, http://dx.doi.org/10.1016/j.powtec.2022.117477 Xie Z; Gu X; Shen Y, 2022, 'A Machine Learning Study of Predicting Mixing and Segregation Behaviors in a Bidisperse Solid-Liquid Fluidized Bed', Industrial and Engineering Chemistry Research, vol. 61, pp. 8551 - 8565, http://dx.doi.org/10.1021/acs.iecr.2c00071 Xu D; Shen Y, 2022, 'An improved machine learning approach for predicting granular flows', Chemical Engineering Journal, vol. 450, pp. 138036 - 138036, http://dx.doi.org/10.1016/j.cej.2022.138036 Xu D; Wang S; Shen Y, 2022, 'Coarse-grained rCFD-DEM analysis of coke gasification and iron ore reduction in the shaft region of an ironmaking blast furnace', Powder Technology, vol. 408, pp. 117706 - 117706, http://dx.doi.org/10.1016/j.powtec.2022.117706