当前位置: X-MOL首页全球导师 国内导师 › 戴明华

个人简介

教育经历 2011.9-2014.6 大连理工大学 | 车辆工程 | 硕士 2007.9-2011.6 大连理工大学 | 机械设计制造及其自动化(汽 | 学士 2004.9-2007.7 江西省萍乡市上栗中学 | 无 工作经历 2014.7-至今 大连理工大学 机械工程学院 | 助理工程师

研究领域

[1]难加工材料超低温冷却加工技术 [2]高强度钢/铝合金温热成形技术研究 [3]高低温界面换热机理及换热性能的研究 [4]高性能加工技术研究

近期论文

查看导师新发文章 (温馨提示:请注意重名现象,建议点开原文通过作者单位确认)

王永卿.Optimization of Jet Parameters for Minimizing Surface Roughness in Cryogenic Milling of Ti-6Al-4V[J],JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME,2022,143(5) 王永卿.Research on surface heat transfer mechanism of liquid nitrogen jet cooling in cryogenic machini...[J],APPLIED THERMAL ENGINEERING,2022,179(,SI) 盈亮.6061-T6铝合金高温本构模型及温成形数值模拟[J],中国有色金属学报,2015,7:1815-1821 戴明华.Exponential Model of Strength-Hardness Mechanical Properties Analysis and Numerical Prediction ...[A],11th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM),2013,1532:1058-1065 盈亮.成形和淬火工艺对高强度热成形零件硬度-强度的影响[J],材料热处理学报,2022,1:205-210 盈亮.高强度热成形钢板冷却速率-强度-硬度预测[J],吉林大学学报 工学版,2014,6:1716-1722 盈亮.基于侧碰的梯度性能热成形B柱抗撞性能优化[J],机械工程学报,2017,53(12):102-109 杨春.基于大学生创新能力培养的线切割实训教学研究[J],实验技术与管理,2018,35(9):182-185 戴明华.新工科背景下激光加工实训选修课的探索实践[J],实验室科学,2022,23(2):164-167 盈亮.Multiobjective crashworthiness optimization of thin-walled structures with functionally graded ...[J],THIN-WALLED STRUCTURES,2021,117:165-177 Liu, W. Q.,Ying, L.,Dai, M. H.,Hu, P.,Wang, D. T..Parameter calibration for a shear modified GTN model and its application to forming limit predi...[A],2018,1063(1) 杨春,戴明华,刘海龙.基于大学生创新能力培养的线切割实训教学研究[J],实验技术与管理,2018,35(9):182-185 Ying, Liang,Gao, Tianhan,Dai, Minghua,Hu, Ping,Shen, Luming.Investigation of convection heat transfer coefficient of circular cross-section short pipes in ...[J],APPLIED THERMAL ENGINEERING,2018,138:133-153 戴明华,张红哲,梁延德,杨春,王永青.Investigation and Practice of Elective Course for “Internet + Laser Processing Training”[A],2018,129-133 戴明华,张红哲,姜英,王永青,杨春.新工科背景下激光加工实训选修课的探索实践[J],实验室科学,2018 刘文权,盈亮,戴明华,胡平,王丹彤.Parameter calibration for a shear modified GTN model and its application to forming limit predict...[J],Journal of Physics: Conference Series,2018,1063:12110-12116 Ying, Liang,Gao, Tianhan,Dai, Minghua,Yang, Yunhe,Hu, Ping.Experimental investigation of temperature-dependent interfacial heat transfer mechanism with sp...[J],APPLIED THERMAL ENGINEERING,2017,121:48-66 Ying, Liang,Gao, Tianhan,Dai, Minghua,Hu, Ping.Investigation of interfacial heat transfer mechanism for 7075-T6 aluminum alloy in HFQ hot form...[J],APPLIED THERMAL ENGINEERING,2017,118:266-282 盈亮,张富博,戴明华,胡平.基于侧碰的梯度性能热成形B柱抗撞性能优化[J],机械工程学报,2017,53(12):102-109 Ying, Liang,Zhang, Sizhu,Hu, Ping,Zhao, Xi,Dai, Minghua.Crashworthiness design of quenched boron steel thin-walled structures with functionally graded ...[J],INTERNATIONAL JOURNAL OF IMPACT ENGINEERING,2016,95:72-88 盈亮,张富博,戴明华,余洋,胡平.基于侧碰的热冲压强度梯度车身结构仿真优化[A],2015,Vol.3:1001-1004 盈亮,戴明华,胡平,闫巧云.6061-T6铝合金高温本构模型及温成形数值模拟[J],中国有色金属学报,2015,25(7):1815-1821 盈亮,余洋,戴明华,张立文,胡平.热冲压快速冷却工艺对22MnB5钢组织与性能的影响[J],金属热处理,2015,40(1):35-38 张红哲,梁延德,戴明华.Teaching Reform of Engineering Training to Cultivate Engineering Talents[A],2015 余洋,盈亮,胡平,戴明华,张富博.典型热冲压强度梯度结构件正碰仿真优化[A],2014,965-967

推荐链接
down
wechat
bug