近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1]罗琨,王连吉,王续跃.大型轴承实体保持架铆接机的设计及支架分析[J],机械设计与制造,2017,10:109-112,116
[2]王禹,王连吉,王续跃.液体静压推力轴承设计与FLUENT仿真分析[J],机械设计与制造,2017,9:220-224
[3]吕愿宏,王续跃,宝图雅,李晓杰,王连吉.粉末药型罩聚能射流形成过程中温度分布及影响分析[J],工程爆破,2016,22(4):16-21
[4]吕彩霞,王连吉,李兴林,尹福刚,高秀娥.航空发动机双转子轴承试验机主轴动静态性能分析[J],轴承,2016,8:35-38,39
[5]董众豹,王续跃,李晓杰,王连吉.基于IPP图像处理的粉末药型罩面密度评价方法[J],机械设计与制造,2016,2:59-63
[6]宁海静,王连吉,李兴林,王续跃.轮毂轴承内圈端面平行度误差测量仪的研制[J],轴承,2016,2:53-57
[7]朱晓松,王连吉,李兴林,王续跃.一种成品轴承高效清洗方式[J],轴承,2016,1:18-20
[8]王续跃,王连吉.粉末药型罩石油射孔弹侵彻性能的数值模拟[J],工程爆破,2016,4:1-4
[9]贾卫,王连吉,张宏伟,王续跃,艾麟.基于LabVIEW和PLC的风电轴承试验机测控系统设计[J],制造业自动化,2015,10:16-18,25
[10]吕愿宏,王续跃,李晓杰,王连吉.粉末药型罩石油射孔弹侵彻性能的数值模拟[J],工程爆破,2015,21(2):1-4
[11]廖宇轩,王连吉,王续跃.轴承滚道旋转刷洗定位技术研究[J],轻工机械,2014,32(4):42-46
[12]尤松,王续跃,王连吉.自动纸箱胶带封口装置[J],轻工机械,2014,32(1):82-86
[13]杨湘达,王连吉,李兴林,温春盛,王续跃.有装球缺口深沟球轴承自动装球机的研制[J],轴承,2012,12:14-16
[14]王续跃,孟庆轩,徐文骥,王连吉,梁延德.角接头激光无填充焊接成形试验研究[J],电加工与模具,2011,2:37-41
[15]王连吉,邹国伟,李兴林,王续跃.非接触测量式圆柱滚子自动分选机[J],轴承,2011,3:34-37
[16]Wang, X. Y.,Guo, H. R.,Xu, W. J.,Guo, D. M.,Wang, L. J..Laser Cladding of a Ramp Thin Wall with a Variable[A],International Conference on Optical, Electronic Materials andApplications,2011,216:419-423
[17]王续跃,郭东明,王连吉.倾斜薄壁件激光熔覆成形试验研究[J],光学精密工程,2011,19(s):29-34
[18]Wang Xuyue,Meng Qingxuan,Kang Renke,Xu Wenji,Guo Dongming,Wang Lianji.Vapor-melt Ratio in Laser Fine Cutting of Slot Arrays[A],14th International Conference on Material Forming ESAFORM,2011,1353:657-662
[19]王续跃,徐文骥,王连吉.Laser cladding of Micro-fluidic Channel Mold[J],Advanced Materials Research,2011,216(3):424-429
[20]王续跃,梁延德,徐文骥,王连吉,赵福令.小孔分流法电火花加工的分流状态研究[J],电加工与模具,2010,4:28-31
[21]刘宏伟,王连吉,李兴林,王续跃.碳氢清洗技术在轴承行业中的应用[J],轴承,2010,7:59-62
[22]季广科,温春盛,李兴林,王连吉.电动机轴承自动清洗装配线的研制[J],轴承,2010,6:22-25
[23]王续跃,吕书森,胡亚峰,王连吉,徐文骥.模具钢微流道沟槽的激光铣削试验研究[J],兵工学报,2010,31(5):592-597
[24]王续跃,孟庆轩,徐文骥,王连吉.多边形异型管激光无填充焊接的试验研究[A],第二届民用飞机制造技术及装备高层论坛,2010,5
[25]王续跃,孟庆轩,康仁科,徐文骥,郭东明,王连吉.气熔比法铝合金薄板激光切割试验研究[J],中国激光,2010,37(10):2648-2652
[26]Xu, W.J.,Dou, Q.L.,Wang, X.Y.,Sun, J.,Wang, L.J..Fabrication of superhydrophobic surface on aluminum substrate[A],AIP Conference Proceedings,2010,1315:1323-1328
[27]Xu, W. J.,Dou, Q. L.,Wang, X. Y.,Sun, J.,Wang, L. J..Fabrication of Superhydrophobic Surface on Aluminum Substrate[A],International Conference on Advances in Materials and ProcessingTechnologies,2010,1315:1323-1328
[28]王续跃,徐文骥,郭东明,王连吉.Laser milling of ceramic based on deteriorative layer[A],Advanced Materials Research,2010,83(3):1-6
[29]王续跃,李建丽,胡亚峰,吴勇波,王连吉,徐文骥.真空环境下微流道沟槽的激光铣削试验[J],中国激光,2010,37(4):1138-1142
[30]Wang, Xuyue,Xu, Weniji,Wang, Lianji,Wang, Jun,Liang, Yande.Heat Absorbing Rate in Laser Drilling of YG8 Alloy[A],International Conference on Manufacturing Science and Engineering (ICMSE2009),2009,97-101:4164-+
[31]季广科,温春盛,李兴林,王连吉.电机轴承自动清洗装配线的研制[A],第五届中国轴承论坛,2009,111-115
[32]刘宏伟,王连吉,李兴林,王续跃.碳氢清洗技术在轴承行业中的应用[A],2009,104-110
[33]Wang, X. Y.,Wang, J.,Wang, L. J.,Xu, W. J.,Guo, D. M..Scanning Path Planning in Laser Bending of Tube Based on Curvature[A],International Conference on Advances in Materials and ProcessingTechnologies (AMPT),2009,264-265:6-+
[34]Xu, W. J.,Song, W. Q.,Wang, X. Y.,Meng, J. B.,Wang, L. J..Numerical and Experimental Research on the Flexible Forming of Metal Sheet using Magnetic-Driving Plasma Arc[A],International Conference on Advances in Materials and ProcessingTechnologies (AMPT),2009,264-265:18-23
[35]Wang, X. Y.,Li, J. L.,Liang, Y. D.,Xu, W. J.,Wang, L. J..Small Hole EDM by Current Dividing Based on Discharging Area[A],International Conference on Advances in Materials and ProcessingTechnologies (AMPT),2009,264-265:925-+
[36]Meng, J. B.,Xu, W. J.,Sun, J.,Wang, X. Y.,Wang, L. J..A Study of Jet Characteristics of Plasma Arc under Transverse Alternating Magnetic Field[A],International Conference on Advances in Materials and ProcessingTechnologies (AMPT),2009,264-265:1222-1227
[37]王续跃,徐文骥,雷明凯,陈华,王连吉,郭东明.基于变质层的Al2O3陶瓷激光铣削试验研究[J],大连理工大学学报,2009,49(2):211-215
[38]王续跃,徐文骥,王连吉.Heat Absorbing Model in Laser Drilling of Hard-Alloy Sheet[A],Proceedings of the 12th CIRP Conference on Modeling of Machining Operations,2009,779-786
[39]王连吉,王续跃,徐文骥.A study of jet characteristics of plasma arc under transverse alternating magnetic filed[A],2009,468-468
[40]王续跃,王连吉,徐文骥,郭东明.Scanning path planning in laser bending of steel tubes[A],2009,29-29
[41]王续跃,梁延德,徐文骥,王连吉.Small hole EDM by current dividing based on discharging-area equalization[A],2009,60-60
[42]王续跃,徐云飞,徐文骥,王连吉,康仁科,郭东明.辅助侧向吹气法金刚石砂轮激光修锐试验与评价[J],中国机械工程,2008,19(6):725-729
[43]王续跃,徐文骥,王连吉,郭东明.A study of laser milling based on deteriorative layer on Al2O3 ceramic[A],AMPT2008,2008
[44]王续跃,徐文骥,王连吉,吴东江,梁延德.Simulation and Experiments in Laser Bending of Silicon Sheet[A],HYMAP 2008,2008
[45]王续跃,汲丛平,康仁科,王连吉,牛伟光.青铜结合剂金刚石砂轮激光修锐试验研究[J],大连理工大学学报,2007,47(6):823-828
[46]王续跃,Wu Y.B,徐文骥,王连吉,Wang J.激光修整圆柱形CBN砂轮中偏焦量对能量分布的影响[J],中国机械工程,2006,17(7):702-705
[47]王秀军,王连吉,徐文骥,李国超.轴承成品超声清洗机的研制[J],机械工程师,2006,1:112-113
[48]徐文骥,方建成,王连吉,周锦进,马腾才.面向喷涂技术的等离子射流特性研究[J],大连理工大学学报,2004,44(1):76-79
京公网安备 11010802027423号