近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
张桥杰,朱祥龙,董志刚,康仁科,卢成,张小民.基于激光位移传感器在机测量砂轮直径[J],组合机床与自动化加工技术,2020,2:84-88,92
Zhang, Yuan,Kang, Renke,Dong, Zhigang,Wang, Qing,Zhu, Xianglong,Xu, Rui,Guo, Dongming.Microstructural evolution of soft magnetic 49Fe-49Co-2V alloy induced by drilling[J],MATERIALS & DESIGN,2020,189
王紫光,康仁科,周平,高尚,董志刚.单晶硅反射镜的超精密磨削工艺[J],光学精密工程,2019,27(5):1087-1095
刘春青,康仁科,李志远,董志刚,邹明虎,王文汉,杨强强.4J29可伐合金超声振动辅助钻削试验研究[J],航空制造技术,2019,62(16):94-101
张倩,康仁科,闫宁,朱祥龙,董志刚,刘海军,王紫光.金刚石砂轮磨削贴膜硅片崩边的研究[J],金刚石与磨料磨具工程,2019,39(4):66-69
康仁科,赵凡,鲍岩,朱祥龙,董志刚.超声辅助磨削SiCf/SiC陶瓷基复合材料[J],金刚石与磨料磨具工程,2019,39(4):85-91
郑非非,董志刚,张嘉桐,刘津廷,康仁科.超声振动对单颗金刚石工具划擦RB-SiC材料去除行为的影响[J],机械工程学报,2019,55(1):225-232
Ou, Li -Wei,Wang, Ya-Hui,Hu, Hui-Qing,Zhang, Liang-Liang,Dong, Zhi-Gang,Kang, Ren-Ke,Guo, Dong-Ming,Shi, Kang.Photochemically combined mechanical polishing of N-type gallium nitride wafer in high efficienc...[J],PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY,2019,55:14-21
郑伟帅,康仁科,刘津廷,赵凡,董志刚.超声辅助磨削专用电源的研制[J],金刚石与磨料磨具工程,2018,38(6):86-91
王毅丹,康仁科,白杜娟,马义新,董志刚,史耀辉.高密度芳纶纸蜂窝的磨削试验[J],金刚石与磨料磨具工程,2018,38(6):48-53
白倩,董志刚,闫英,高尚,朱祥龙,段春争,刘冲,崔岩.金属增减材复合制造专业硕士实践教学平台建设[J],实验室科学,2018,21(2):158-160,163
王昌瑞,康仁科,鲍岩,朱祥龙,董志刚,郭东明.飞机蒙皮镜像铣加工稳定性分析[J],航空学报,2018,39(11):204-216
李崎岩,朱祥龙,董志刚,宋洪侠,康仁科.Deviation analysis of wall thickness measurement for tube parts with large depth to diameter rati...[A],2018
牛林,金洙吉,周中正,董志刚,朱祥龙.Study on Electrochemical Effect in Electrochemical Grinding of Tungsten Alloy[A],2018
朱祥龙,李俊卿,董志刚,康仁科,高尚,郭东明.Design of Ultra-precision Machine for Integrated Grinding and Polishing of Silicon Wafers[A],2018
郭江,朱祥龙,董志刚,郭晓光,康仁科,郭东明.6th International Conference on Nanomanufacturing[A],2018
秦炎,康仁科,董志刚,王毅丹,杨洁,朱祥龙.Burr removal from measurement data of honeycomb core surface based on dimensionality reduction an...[J],Measurement Science and Technology,2018,29(11):115010-115010
Bao, Yan,Kang, Renke,Dong, Zhigang,Zhu, Xianglong,Wang, Changrui,Guo, Dongming.Multipoint support technology for mirror milling of aircraft skins[J],MATERIALS AND MANUFACTURING PROCESSES,2018,33(9):996-1002
鲍岩,董志刚,朱祥龙,王昌瑞,郭东明,康仁科.蒙皮镜像铣削支撑技术的研究现状和发展趋势[J],航空学报,2018,39(4):42-53
郭江,朱祥龙,董志刚,郭晓光,康仁科,郭东明.Finishing of rectangular microfeatures by localized vibration-assisted magnetic abrasive polishin...[A],2018
朱祥龙,高尚,康仁科,董志刚,崔岩.全日制专业型硕士实践能力培养体系之探析[J],实验室科学,2017,20(5):229-232
王毅丹,王宣平,康仁科,孙健淞,贾振元,董志刚.直刃尖刀超声辅助切割Nomex蜂窝芯切削力分析[J],机械工程学报,2017,53(19):73-82
张迅,董志刚,王毅丹,宿增迪,宋洪侠,康仁科.Nomex蜂窝芯直刃尖刀超声切割表面微观形貌特征[J],机械工程学报,2017,53(19):90-99
孙健淞,董志刚,王毅丹,刘津廷,秦炎,康仁科.超声切割铝蜂窝试验研究[J],机械工程学报,2017,53(19):128-135
王紫光,高尚,朱祥龙,董志刚,康仁科.硅片低损伤磨削砂轮及其磨削性能[J],光学精密工程,2017,25(10):2689-2696
董志刚,段佳冬,康仁科,朱祥龙,郑非非.超声辅助磨削硬脆材料芯棒直径预测模型[J],光学精密工程,2017,25(8):2106-2112
牛景露,朱祥龙,康仁科,王毅丹,董志刚.圆片刀超声切削蜂窝芯材料试验研究[J],金刚石与磨料磨具工程,2017,37(3):62-68
Zhu, Xianglong,Chen, Xiuyi,Liu, Haijun,Kang, Renke,Zhang, Bi,Dong, Zhigang.An empirical equation for prediction of silicon wafer deformation[J],MATERIALS RESEARCH EXPRESS,2017,4(6)
陈修艺,朱祥龙,康仁科,董志刚,刘海军.金刚石砂轮磨削单晶硅片面形变化规律[J],金刚石与磨料磨具工程,2017,37(2):6-10
Hu, Rui,Chen, Wenjiong,Li, Quhao,Liu, Shutian,Zhou, Ping,Dong, Zhigang,Kang, Renke.Design Optimization Method for Additive Manufacturing of the Primary Mirror of a Large-Aperture...[J],JOURNAL OF AEROSPACE ENGINEERING,2017,30(3)
张园,康仁科,刘津廷,张一鸣,郑伟帅,董志刚.超声振动辅助钻削技术综述[J],机械工程学报,2017,53(19):33-44
Gao, Shang,Kang, Ren-Ke,Dong, Zhi-Gang,Zhang, Bi,Wang, Zi-Guang.Surface integrity and removal mechanism in grinding sapphire wafers with novel vitrified bond d...[J],MATERIALS AND MANUFACTURING PROCESSES,2017,32(2):121-126
董志刚,朱祥龙,康仁科,张璧.Characterisation of material removal in ultrasonically assisted grinding of SiCp/Al with high vol...[J],The International Journal of Advanced Manufacturing Technology,2017,93:2827-2839
高尚,康仁科,董志刚.Surface layer damage of quartz glass induced by ultra-precision grinding with different grit size[A],2017,872:19-24
吴鑫,董志刚,康仁科,朱祥龙,王毅丹,刘津廷.直刃尖刀形状对超声辅助切削系统振动性能的影响[J],航空制造技术,2016,22:52-57
曹克,董志刚,康仁科,朱祥龙,刘津廷.微晶刚玉砂轮磨削钛合金TC17磨削力研究[J],金刚石与磨料磨具工程,2016,36(5):1-7,14
Li Z.,Bao Y.,Kang R.K.,Dong Z.G.,Zhou P.,Jin Z.J..An advanced support method of aircraft skin mirror milling - Fluid lubricating support[A],2016,874:469-474
张园,康仁科,刘津廷,张一鸣,董志刚.超声辅助振动钻削技术综述[A],2016,9
张迅,董志刚,王毅丹,康仁科,宋洪侠.Nomex蜂窝芯直刃尖刀超声切割表面微观形貌特征研究[A],2016,10
郑非非,张嘉桐,董志刚,刘津廷,康仁科.超声振动对单颗金刚石工具划擦RB-SiC的材料去除行为的影响[A],2016,7
孙健淞,董志刚,王毅丹,刘津廷,康仁科.超声切割铝蜂窝可行性研究[A],2016,8
王毅丹,王宣平,董志刚,康仁科,贾振元.直刃尖刀超声辅助切割Nomex蜂窝芯切削力分析[A],2016,10
Liu, Haijun,Zhu, Xianglong,Kang, Renke,Dong, Zhigang,Chen, Xiuyi.Three-point-support method based on position determination of supports and wafers to eliminate ...[J],PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY,2016,46:339-348
高尚,王紫光,康仁科,董志刚,张璧.工件旋转法磨削硅片的磨粒切削深度模型[J],机械工程学报,2016,52(17):86-93
Gao, Feng,Zheng, Fei Fei,Dong, Zhi Gang,Kang, Ren Ke,Duan, Jia Dong.Grinding force of RB-SiC in ultrasonic assisted grinding with sintered diamond grinding wheel[A],2016,861:56-62
Li, Xiao Feng,Dong, Zhi Gang,Kang, Ren Ke,Wang, Yi Dan,Liu, Jin Ting,Zhang, Yuan.Comparison of thrust force in ultrasonic assisted drilling and conventional drilling of aluminum ...[A],2016,861:38-43
康仁科,杨国林,董志刚,朱祥龙,郭东明.飞机装配中的先进制孔技术与装备[J],航空制造技术,2016,10:16-24
王欢,董志刚,康仁科,杨国林,谢海龙.钛合金螺旋铣孔的切削力和切削温度试验研究[J],航空制造技术,2016,9:91-97
谢海龙,董志刚,康仁科,杨国林,许君,郭东明.C/E复合材料螺旋铣孔切屑形状与切削温度研究[J],北京航空航天大学学报,2016,43(2):328-334
马付建,董志刚,康仁科,张生芳,沙智华.超声变幅杆与杯型工具一体化设计[J],振动工程学报,2016,29(2):231-236
Chen, Xiao,Zhou, Ping,Kang, Ren-ke,Dong, Zhi-gang.Numerical study on thermal deformation characteristic of water-cooled mirror with interdigitate...[J],APPLIED THERMAL ENGINEERING,2016,98:357-364
Dong, Zhigang,Gao, Shang,Huang, Han,Kang, Renke,Wang, Ziguang.Surface integrity and removal mechanism of chemical mechanical grinding of silicon wafers using...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2016,83(5-8):1231-1239
刘海军,朱祥龙,康仁科,董志刚.反转法消除硅片重力附加变形适用性研究[J],人工晶体学报,2015,44(12):3439-3443,3454
Liu, Haijun,Dong, Zhigang,Kang, Renke,Zhou, Ping,Gao, Shang.ANALYSIS OF FACTORS AFFECTING GRAVITY-INDUCED DEFLECTION FOR LARGE AND THIN WAFERS IN FLATNESS ...[J],METROLOGY AND MEASUREMENT SYSTEMS,2015,22(4):531-546
Liu, Haijun,Dong, Zhigang,Huang, Han,Kang, Renke,Zhou, Ping.A new method for measuring the flatness of large and thin silicon substrates using a liquid imm...[J],MEASUREMENT SCIENCE AND TECHNOLOGY,2015,26(11)
刘津廷,董志刚,康仁科,王毅丹,郑非非.石英纤维增强聚酰亚胺材料超声辅助磨削[A],2015,5
王健,郑非非,董志刚,康仁科,刘津廷,郭东明.碳化硅磨削亚表面损伤检测方法[J],金刚石与磨料磨具工程,2015,35(4):60-65
Chen, Xiao,Zhou, Ping,Kang, Ren-ke,Dong, Zhi-gang,Ai, Xiao-chen.Structural optimization design of water-cooling mirror with straight flow channels[J],APPLIED THERMAL ENGINEERING,2015,81:154-160
董志刚,曹克,康仁科,郝丙君,郑非非.微晶刚玉砂轮磨削钛合金 TC17试验研究[J],金刚石与磨料磨具工程,2015,35(2):14-20
艾小忱,董志刚,周平,康仁科,陈晓,郭东明.金刚石砂轮缓进给磨削单晶硅沟槽研究[J],金刚石与磨料磨具工程,2015,35(2):26-32
京公网安备 11010802027423号