近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
郭正刚.Rock-breaking performance of cutters of tunnel boring machine in broken coal rock formation[J],International Journal of Safety and Security Engineering,2021,10(1):17-25
郭正刚.Rock Breaking Performance of Two Disc Cutters of Tunnel Boring Machine for Safe Tunneling in Unst...[J],International Journal of Safety and Security Engineering,2021,10(5):639-646
高飞.Discrete- and Finite-Element Analysis on the Tunneling Safety of Pipe Jacking Machine in Coal Roc...[J],International Journal of Safety and Security Engineering,2021,38(4):801-807
郭正刚.Numerical simulation analysis of coal rock crushed by disc cutter based on ABAQUS[A],2021
郭正刚.Analysis of Muck Discharge Performance of Tunneling System of Mining Model Pipe Jacker Based on E...[A],2021
郭正刚,孙伟,岳明.Rotational Moment Analysis and Posture Rectification Strategy of Shield Machine[A],2009,453-462
孙伟,李二洋,王晓邦,郭正刚,李旭东,宋学官.面向智能挖掘机的最优挖掘轨迹规划[J],大连理工大学学报,2018,58(3):246-253
郭正刚.A Method of Laser Drift Measurement for Compensation[A],2017
Guo Z.-G.,Wang F.-T.,Sun W.,Zhang X..A method of shield attitude working condition classification[J],Journal of Donghua University (English Edition),2012,29(3):259-262
李宏坤,郭正刚.Investigation on Machine Condition Classification by Using Multi-Scale Entropy Feature Extraction...[J],International Journal of Comprehensive Engineering，Part B : Intelligent Engineering,2012,1(1):67-76
马川,李宏坤,赵利华,郭正刚.运用小波包峭度包络的滚动轴承故障诊断[J],振动、测试与诊断,2011,31(6):720-723
Chen J.-G.,Wang F.-T.,Zhu H.,Guo Z.-G.,Zhang H.-Y..Sub-band ICA with selection criterion for BBS of dependent mages[J],Journal of Harbin Institute of Technology (New Series),2011,18(4):113-118
苏文胜,王奉涛,朱泓,张志新,李宏坤,郭正刚.双树复小波域隐Markov树模型降噪及在机械故障诊断中的应用[J],振动与冲击,2011,30(6):47-52
苏文胜,王奉涛,朱泓,郭正刚,张志新,张洪印.基于小波包样本熵的滚动轴承故障特征提取[J],振动、测试与诊断,2011,31(2):162-166
Guo Z.-G.,Sun W.,Yue M..A model of shield jack thrust to shield attitude[J],Journal of Donghua University (English Edition),2011,28(2):124-127
李宏坤,赵利华,张志新,郭正刚.非线性刚度转子-轴承支承松动故障的特征分析[A],2011,6
郭正刚,王奉涛.Shield attitude rectification decision function based on support vector data description[A],2011
李宏坤,张志新,郭正刚,邹拴庆,王奉涛.时频图像Hough变换在滚动轴承故障诊断中的应用[J],振动、测试与诊断,2010,30(6):634-637
赵利华,李宏坤,郭正刚,丁兴国.轴心轨迹的仿真计算及特征参数提取[A],2010,Vol.29:37-39
Su, Wensheng,Wang, Fengtao,Zhu, Hong,Zhang, Zhixin,Guo, Zhenggang.Rolling element bearing faults diagnosis based on optimal Morlet wavelet filter and autocorrela...[J],MECHANICAL SYSTEMS AND SIGNAL PROCESSING,2010,24(5,SI):1458-1472
陈建国,王奉涛,郭正刚,张志新,李宏坤.信号源相关的独立分量分析研究及应用[A],2010,Vol.31:4
苏文胜,王奉涛,张志新,郭正刚,李宏坤.EMD降噪和谱峭度法在滚动轴承早期故障诊断中的应用[J],振动与冲击,2010,29(3):18-21
王雷,王奉涛,朱泓,张志新,郭正刚.基于核主分量分析的经验模式分解及其工程应用[J],振动与冲击,2010,29(2):39-41,68
王奉涛,郭正刚,张志新,李宏坤.信号源相关的独立分量分析研究及应用[J],仪器仪表学报,2010,31(4):32-35
张莉瑶,朱泓,郭正刚,侯永强.汽车前轴应力采集系统的设计[J],汽车零部件,2009,12:65-67
张莉瑶,郭正刚,朱泓,张志新.在线修正大型起重机剩余寿命的研究[J],起重运输机械,2009,12:26-28
赵俊龙,张志新,郭正刚,李宏坤,王奉涛.往复式压缩机气缸压力模拟曲线提取[J],振动、测试与诊断,2009,29(1):79-82
陈建国,张志新,郭正刚,王奉涛,李宏坤.独立分量分析方法在经验模式分解中的应用[J],振动与冲击,2009,28(1):109-111,130
郭正刚,孙伟,岳明.Rotational Moment Analysis and Posture Rectification Strategy of Shield Machine[A],Int. Conf. on Intelligent Robotics and Application,2009,453-462
岳明,孙伟,郭正刚.Dynamic Mechanism and Key Rectification Techniques of Shield Machine in the Vertical Plane[A],2009,412-422
赵俊龙,郭正刚,张志新,王奉涛,李宏坤.梳状滤波器在滚动轴承早期故障诊断中的应用[J],振动与冲击,2008,27(12):171-174
郭建平,王亮,郭正刚,张志新.单通道信号处理的前端信号调理模块的设计[J],仪表技术与传感器,2008,9:99-101
赵俊龙,郭正刚,张志新,李宏坤,王奉涛.往复式压缩机气阀信号特征提取及故障分类[A],2008,Vol.29:438-441
苏文胜,郭正刚,张志新,李宏坤,王奉涛.基于虚拟仪器的汽车后桥性能检测系统的设计[A],2008,Vol.29:594-597
别锋锋,郭正刚,张志新,李宏坤,王奉涛.往复式压缩机故障信息模糊二元树诊断方法研究[J],大连理工大学学报,2008,48(3):383-386
别锋锋,郭正刚,张志新,李宏坤,王奉涛.基于局域波时频谱的系统级故障诊断方法研究[J],仪器仪表学报,2008,29(5):1092-1095
王亮,郭正刚,张志新.一种实用机械设备振动信号的调理模块设计[J],设备管理与维修,2008,2:48-50
李宏坤,郭正刚.Gearbox’s Noise Level Prediction by Combination Vibration and Sound Signal[A],2008,1(1):1-6
郭正刚,张志新,李宏坤,王奉涛.基于虚拟仪器的汽车后桥性能监测系统的设计[J],仪器仪表学报,2008,29(4):594-597
郭正刚,张志新,李宏坤,王奉涛.往复式压缩机气阀信号特征提取及故障分类[J],仪器仪表学报,2008,29(4):438-440
李艳军,郭正刚,张志新,马孝江.基于FPGA多通道同步数据采集系统设计[J],微计算机信息,2007,23(26):212-213,154
汪崇,郭正刚,张志新,马孝江.远程多通道数据采集卡的设计[J],仪器仪表用户,2007,14(2):53-54
方加宝,张树坤,尹祥杰,刘欣,郭正刚.基于无线射频的轮胎安全监测系统的研制[J],工业控制计算机,2005,18(12):29-30
张元良,陈翰军,黄春英,郭正刚,石忠晓.新型焦炉三车联锁控制系统的开发[J],电子机械工程,2003,19(5):60-64
刘欣,郭正刚,石忠晓,陈翰军.焦炉三车联锁的自动化研究[J],燃料与化工,2003,34(2):62-65
张元良,陈翰军,邓华,郭正刚,石忠晓.基于CAN总线的多功能汽车行驶记录仪[J],电子工程师,2002,28(12):38-40
京公网安备 11010802027423号