当前位置: X-MOL首页全球导师 国内导师 › 白倩

个人简介

教育经历 2008.122012.8 伦敦帝国理工学院机械工程博士 2000.92004.7 西北工业大学材料加工学士 工作经历 2015.1至今 大连理工大学机械工程学院副教授 2012.82015.1 英国伦敦帝国理工学院研究助理 2007.102008.11 英国伯明翰大学机械工程学院研究助理

近期论文

查看导师新发文章 (温馨提示:请注意重名现象,建议点开原文通过作者单位确认)

Yin, Jingfei,Bai, Qian,Haitjema, Han.Two-dimensional detection of subsurface damage in silicon wafers with polarized laser scatterin...[J],JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2022,284 Bai, Qian,Wu, Bingzhe,Qiu, Xiaoling,Zhang, Bi,Chen, Juanjuan.Experimental study on additive/subtractive hybrid manufacturing of 6511 steel: process optimiza...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2020,108(5-6):1389-1398 Bai, Qian,Feng, Heng,Si, Likun,Pan, Ran.A Novel Stress Relaxation Modeling for Predicting the Change of Residual Stress During Annealin...[J],METALLURGICAL AND MATERIALS TRANSACTIONS A PHYSICAL METALLURGY AND MATERIAL,2022,50(12):5750-5759 Bai, Qian,Shi, Zhusheng,Lin, Jianguo,Trevor Dean.Application of a continuum damage mechanics (CDM)-based model for predicting formability of war...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,88(9-12):3437-3446 Du, Wei,Bai, Qian,Zhang, Bi.Machining characteristics of 18Ni-300 steel in additive/subtractive hybrid manufacturing[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,95(5-8):2509-2519 Zhang, Bi,Li, Yongtao,Bai, Qian.Defect Formation Mechanisms in Selective Laser Melting: A Review[J],Chinese Journal of Mechanical Engineering,2022,30(3):515-527 Yin, Jingfei,Bai, Qian.Methods for Detection of Subsurface Damage: A Review[J],Chinese Journal of Mechanical Engineering,2022,31(1) Du, Wei,Bai, Qian,Wang, Yibo.Eddy current detection of subsurface defects for additive/subtractive hybrid manufacturing[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,95(9-12):3185-3195 Yin, Jingfei,Bai, Qian.Subsurface Damage Detection on Ground Silicon Wafers Using Polarized Laser Scattering[J],JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING TRANSACTIONS OF THE ASME,2022,141(10) Yang, Xiuxuan,Bai, Qian,Zhang, Bi.Grain size influence on chip formation in high-speed machining of pure iron[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,108(5-6):1357-1366 Yang, Xiuxuan,Zhang, Bi,Xie, Guoyin.Correlation of microstructure and mechanical properties of Ti2AlNb manufactured by SLM and heat t...[J],INTERMETALLICS,2022,139 Qiao, Guowen,Zhang, Bi,Dilnoza, Yuvasheva.Effect of Heat Treatment on Microstructure and Residual Stress of GH3536 Superalloy Fabricated by...[J],JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2022 丁宝洋,白倩,刘具龙,张璧.基于Simulink反馈方法的钛合金铣削刀具磨损预测[J],机械工程学报,2022,55(11):224-232 王龙群,张璧,彭颖,谢国印,白倩,王义博.增减材复合制造内部缺陷的涡流检测[J],航空学报,2022,41(3):287-295 冯一琦,谢国印,张璧,乔国文,高尚,白倩.激光功率与底面状态对选区激光熔化球化的影响[J],航空学报,2022,40(12):229-238 白倩,马浩,殷景飞.基于偏振激光共聚焦的研磨石英玻璃亚表面损伤检测[J],Guangxue Jingmi Gongcheng/Optics and Precision Engineering,2022,29(8):1795-1803 李庆鹏,张璧,白倩.Detection of subsurface microcracks after grinding of single crystal silicon wafer by polarized l...[J],Jingangshi yu Moliao Moju Gongcheng/Diamond and Abrasives Engineering,2022,40(4):87-92 刘具龙,张璧,白倩,程博.钛合金铣削刀具/工件接触区域温度预测[J],航空学报,2022,39(12):358-369 Yin, Jingfei,Bai, Qian,Li, Yinnan.Formation of subsurface cracks in silicon wafers by grinding[J],纳米技术与精密工程,2022,1(3):172-179 Zhao, Linjie,Wang, Yiqi,Zhou, Ping,Bai, Qian.Surface roughness measurement accuracy analysis of grinded silicon wafer by white light scannin...[A],OPTICAL MEASUREMENT SYSTEMS FOR INDUSTRIAL INSPECTION XI,2022,11056 程博,张璧,白倩,乔国文.选区激光熔化马氏体时效钢(18Ni300)工艺参数研究[J],大连理工大学学报,2022,58(5):471-478 Dong, Xinghan,Zhang, Bi,Feng, Heng,Bai, Qian.Evaluation of Internal Residual Stresses in Rolled Pure Copper Plate[A],25th Congress of International Federation for Heat Treatment and Surface Engineering,2022 Wang, Yibo,Bai, Qian,Du, Wei,Zhang, Bi.Effect on Eddy Current Detection for Subsurface Defects in Titanium Alloys[A],The 8th International Conference on Computational Methods,2022,1445-1452 Feng, Heng,Bai, Qian,Dong, Xinghan.A study of Residual Stress in Rolled Copper before and after Heat Treatment[A],The 17th International Manufacturing Conference in China,2022,617-622 Guo, Chao,Tang, Hanyu,Wang, Lihang,Bai, Qian.Microstructure Evolution of Cold-rolled Pure Iron under Different Heat Treatments[A],The 17th International Manufacturing Conference in China,2022,598-603 Huo, Yuanming,Lin, Jianguo,Bai, Qian,Wang, Baoyu,Tang, Xuefeng,Ji, Hongchao.Prediction of microstructure and ductile damage of a high-speed railway axle steel during cross...[J],JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2022,239:359-369 白倩.金属增减材复合制造专业硕士实践教学平台建设[J],实验室科学,2022,21(2):158-160,163 闫英,周平,郭晓光,王一奇,白倩,司立坤.P SD法在超精密加工质量评价中的应用[J],实验室科学,2022,21(4):11-14 Zhang, Bi,Li, Yongtao,Bai, Qian.Defect Formation Mechanisms in Selective Laser Melting: A Review (vol 30, pg 515, 2017)[J],Chinese Journal of Mechanical Engineering,2022,30(6):1476-1476 Yin, Jingfei,Bai, Qian,Han, Haitjema,Zhang, Bi.Depolarization of surface scattering in polarized laser scattering detection for machined silicon...[J],PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY,2022,73:203-213 Zhang, Zhenyu,Huang, Siling,Wang, Bo,Bai, Qian,Zhang, Bi,Kang, Renke,Guo, Dongming.A novel approach of high-performance grinding using developed diamond wheels[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,91(9-12):3315-3326 Du, Wei,Bai, Qian,Zhang, Bi.A Novel Method for Additive/Subtractive Hybrid Manufacturing of Metallic Parts[A],44th North American Manufacturing Research Conference (NAMRC),2022,5:1018-1030 Fang, Shuang,Shi, Zhusheng,Bai, Qian,Jiang, Jiaying,Wang, Shuyun,Lin, Jianguo.An investigation of direct powder forging of nickel superalloy FGH96[A],16th Metal Forming International Conference, 2016,2022,716:793-799 Yin, Jingfei,Bai, Qian,Goel, Saurav,Zhou, Ping.An analytical model to predict the depth of sub-surface damage for grinding of brittle materials[J],CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY,2022,33:454-464 Huo, Yuanming,Bai, Qian,Wang, Baoyu,Lin, Jianguo.A new application of unified constitutive equations for cross wedge rolling of a high-speed rai...[J],JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2022,223:274-283 Ma, Xueli,Wang, Shuyun,Bai, Qian,Sardar M.N. Islam,Liu, Xiaobing.Coordinating a three-echelon fresh agricultural products supply chain considering freshness-kee...[J],APPLIED MATHEMATICAL MODELLING,2022,67:337-356 Huo, Yuanming,Wang, Baoyu,Lin, Jianguo,Bai, Qian,Ji, Hongchao,Tang, Xuefeng.Hot compression deformation behavior and microstructure evolution rule of a high-speed railway ...[J],INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES,2022,24(6):447-454 Li, Shuai,Bai, Qian,Zhang, Bi.Effect of temperature buildup on milling forces in additive/subtractive hybrid manufacturing of...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,107(9-10):4191-4200 Shao, Zhutao,Bai, Qian,Li, Nan,Lin, Jianguo,Shi, Zhusheng,Stanton, Matthew,Watson, Douglas,Dean, Trevor.Experimental investigation of forming limit curves and deformation features in warm forming of ...[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B JOURNAL OF EN,2022,232(3):465-474 An, Runli,Guo, Dongming,Bai, Qian,Jin, Zhuji,Zhu, Xianglong,Han, Xiaolong.Effect of polishing plate properties on YAG crystal disk polishing[A],6th International Conference on Nanomanufacturing,2022 Wu, Bingzhe,Qiu, Xiaoling,Zhang, Bi,Chen, Juanjuan.Experimental study on additive/subtractive hybrid manufacturing of 6511 steel: process optimiza...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,108(5-6):1389-1398 Yin, Jingfei,Bai, Qian,Haitjema, Han,Zhang, Bi.Two-dimensional detection of subsurface damage in silicon wafers with polarized laser scatterin...[J],JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2020,284 Yang, Xiuxuan,Zhang, Bi,Bai, Qian,Zheng, Meng,Tang, Jingang.Grain size influence on chip formation in high-speed machining of pure iron[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2020,108(5-6):1357-1366 王龙群,张璧,彭颖,谢国印,白倩,王义博.增减材复合制造内部缺陷的涡流检测[J],航空学报,2020,41(3):287-295 冯一琦,谢国印,张璧,乔国文,高尚,白倩.激光功率与底面状态对选区激光熔化球化的影响[J],航空学报,2019,40(12):229-238 Yin, Jingfei,Bai, Qian,Zhang, Bi.Methods for Detection of Subsurface Damage: A Review[J],CHINESE JOURNAL OF MECHANICAL ENGINEERING,2018,31(1) 程博,张璧,白倩,乔国文.选区激光熔化马氏体时效钢(18Ni300)工艺参数研究[J],大连理工大学学报,2018,58(5):471-478 丁宝洋,白倩,刘具龙,张璧.基于Simulink反馈方法的钛合金铣削刀具磨损预测[J],机械工程学报,2018,55(11):224-232 闫英,周平,郭晓光,王一奇,白倩,司立坤.P SD法在超精密加工质量评价中的应用[J],实验室科学,2018,21(4):11-14 白倩,董志刚,闫英,段春争,刘冲,崔岩,高尚,朱祥龙.金属增减材复合制造专业硕士实践教学平台建设[J],实验室科学,2018,21(2):158-160,163 刘具龙,张璧,白倩,程博.钛合金铣削刀具/工件接触区域温度预测[J],航空学报,2018,39(12):358-369 Du, Wei,Bai, Qian,Wang, Yibo,Zhang, Bi.Eddy current detection of subsurface defects for additive/subtractive hybrid manufacturing[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2018,95(9-12):3185-3195 Du, Wei,Bai, Qian,Zhang, Bi.Machining characteristics of 18Ni-300 steel in additive/subtractive hybrid manufacturing[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2018,95(5-8):2509-2519 Shao, Zhutao,Bai, Qian,Li, Nan,Lin, Jianguo,Shi, Zhusheng,Dean, Trevor,Stanton, Matthew,Watson, Douglas.Experimental investigation of forming limit curves and deformation features in warm forming of ...[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE,2018,232(3):465-474 闫英,周平,郭晓光,王一奇,白倩,司立坤.PSD法在超精密加工质量评价中的应用[J],实验室科学,2018 Yin, Jingfei,Bai, Qian,Li, Yinnan,Zhang, Bi.Formation of subsurface cracks in silicon wafers by grinding[J],Nanotechnology and Precision Engineering,2018,1(3):172-179 An, Runli,Han, Xiaolong,Zhu, Xianglong,Jin, Zhuji,Bai, Qian,Guo, Dongming.Effect of polishing plate properties on YAG crystal disk polishing[A],2018 Huo, Yuanming,Lin, Jianguo,Bai, Qian,Ji, Hongchao,Tang, Xuefeng,Wang, Baoyu.Hot compression deformation behavior and microstructure evolution rule of a high-speed railway ...[J],INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES,2017,24(6):447-454 Zhang, Bi,Li, Yongtao,Bai, Qian.Defect Formation Mechanisms in Selective Laser Melting: A Review (vol 30, pg 515, 2017)[J],CHINESE JOURNAL OF MECHANICAL ENGINEERING,2017,30(6):1476-1476 Zhang, Zhenyu,Huang, Siling,Wang, Shaochen,Wang, Bo,Bai, Qian,Zhang, Bi,Kang, Renke,Guo, Dongming.A novel approach of high-performance grinding using developed diamond wheels[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2017,91(9-12):3315-3326

推荐链接
down
wechat
bug