当前位置: X-MOL首页全球导师 国内导师 › 李涛

个人简介

教育经历 2002.3 -- 2006.4 哈尔滨工业大学 机械设计及理论 博士 1999.9 -- 2002.2 燕山大学 机械设计及理论 硕士 1995.9 -- 1999.7 燕山大学 机械设计及理论 学士 工作经历 2006.5 -- 2013.12 大连理工大学 机械工程学院 讲师 2013.12 -- 至今 大连理工大学 机械工程学院 副教授

研究领域

产品可持续性评价方法 激光增材修复技术 机械装备能耗分析与评估方法 企业信息化技术

近期论文

查看导师新发文章 (温馨提示:请注意重名现象,建议点开原文通过作者单位确认)

李琦.基于神经网络的激光熔覆层面积及气孔率预测[J],应用激光,2021,40(1):29-34 Zhichao Liu.Recent advances and current developments of molten pool temperature measurement for laser additive m[J],Recent Patents on Mechanical Engineering,2021,13(1):13-23 Li, Xiangbo,Li, Tao,Shi, Bowen,Wang, Dong,Adnan, Muhammad,Lu, Huitian.The influence of substrate tilt angle on the morphology of laser cladding layer[J],SURFACE & COATINGS TECHNOLOGY,2020,391 Peng, Shitong,Li, Tao,Zhao, Jiali,Guo, Yanchun,Lv, Shengping,Tan, George Z.,Zhang, Hongchao.Petri net-based scheduling strategy and energy modeling for the cylinder block remanufacturing und[J],ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING,2019,58:208-219 Peng, Shitong,Li, Tao,Zhao, Jiali,Lv, Shengping,Tan, George Z.,Dong, Mengmeng,Zhang, Hongchao.Towards energy and material efficient laser cladding process: Modeling and optimization using a hy[J],JOURNAL OF CLEANER PRODUCTION,2019,227:58-69 Li, Tao,Liu, Zhi-Chao,Zhang, Hong-Chao,Jiang, Qiu-Hong.Environmental emissions and energy consumptions assessment of a diesel engine from the life cycle [J],JOURNAL OF CLEANER PRODUCTION,2013,53:7-12 李涛.A system boundary identification method for life cycle assessment[J],INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT,2021,19(3):646-660 李涛.A PCA-based method for construction of composite sustainability indicators[J],INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT,2021,17(5):593-603 Gao, Wang,Li, Tao,Tang, Zijue,Peng, Shitong,Zhang, Hong-chao.Investigation on the Comparative Life Cycle Assessment between Newly Manufacturing and Remanufactu[A],2017,61:750-755 Peng, Shitong,Li, Tao,Wang, Yue,Liu, Zhichao,Tan, George Z.,Zhang, Hongchao.Prospective Life Cycle Assessment Based on System Dynamics Approach: A Case Study on the Large-Sca[J],JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME,2019,141(2,SI) Peng, Shitong,Li, Tao,Li, Mengyun,Guo, Yanchun,Shi, Junli,Tan, George Z.,Zhang, Hongchao.An integrated decision model of restoring technologies selection for engine remanufacturing practi[J],JOURNAL OF CLEANER PRODUCTION,2019,206:598-610 Jiang, Qiuhong,Liu, Zhichao,Liu, Weiwei,Li, Tao,Cong, Weilong,Zhang, Hongchao,Shi, Junli.A principal component analysis based three-dimensional sustainability assessment model to evaluate[J],JOURNAL OF CLEANER PRODUCTION,2018,187:625-637 Wang F.,Li T.,Zhang H.-C.,Yuan C.Y..Exergy analysis of atomic layer deposition for Al2O3 nano-film preparation[A],2013,285-290 Li T.,Zhuang J.,Zhang H.-C.,Liu Z.-C..Energy consumption assessment of remanufacturing processes[A],2013,649-653 Shi, Junli,Li, Tao,Peng, Shitong,Liu, Zhichao,Zhang, Hongchao,Jiang, Qiuhong.Comparative Life Cycle Assessment of remanufactured liquefied natural gas and diesel engines in Ch[J],JOURNAL OF CLEANER PRODUCTION,2015,101:129-136 Li T.,Yang J.,Zhang H.-C.,Yuan C..Chemical reaction thermodynamic model of low pressure CVD for Nano-TiO 2 film preparation[A],2012 郭燕春,董萌萌,李涛,彭世通,李梦云.零件再制造过程的不确定能耗建模与评估方法[J],大连理工大学学报,2019,59(1):45-52 Liu, Zhichao,Jiang, Qiuhong,Cong, Weilong,Li, Tao,Zhang, Hong-Chao.Comparative study for environmental performances of traditional manufacturing and directed energy [J],INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY,2018,15(11):2273-2282 董萌萌,李涛,郭燕春,吴祖鹏,唐梓珏,彭世通.激光熔覆系统能耗建模分析方法研究[J],大连理工大学学报,2018,58(3):229-237 李梦云,李涛,彭世通,郭燕春.Batch Scheduling of Remanufacturing Flexible Job Shop for Minimal Electricity- and Time-Cost[A],2018,923:300-308 徐海岩,李涛,李海波,王鑫林,张洪潮.316L激光熔覆质量预测及路径选择研究[J],激光技术,2018,42(1):53-59 徐海岩,李涛,李海波,王鑫林,张洪潮.激光熔覆成形薄壁件离焦量和Z轴提升量选择方法[J],大连理工大学学报,2017,57(6):557-563 Peng, Shitong,Li, Tao,Wang, Xinlin,Dong, Mengmeng,Liu, Zhichao,Shi, Junli,Zhang, Hongchao.Toward a Sustainable Impeller Production: Environmental Impact Comparison of Different Impeller Ma[J],JOURNAL OF INDUSTRIAL ECOLOGY,2017,21(,SI):S216-S229 沈毅鸿,张元良,李涛,王金龙.激光熔覆中工艺参数对形成层几何特征及硬度影响分析[J],大连理工大学学报,2017,57(3):247-251 李海波,李涛,王鑫林,徐海岩,张洪潮.倾斜基体对激光熔覆能量分布的影响研究[J],应用激光,2017,37(3):333-339 徐敬通,李涛,陈俊超,杨淑德,张洪潮.数控机床的能耗模型及实验研究[J],中南大学学报(自然科学版),2017,48(8):2024-2033 Wang, Liang,Li, Tao.Life Cycle Assessment of a Compressor Rotor with a Hybrid Analysis Model[A],2017,112:240-247 李涛,张洪潮.Toward a sustainable impeller production: environmental impact comparison among different impeller m[J],Journal of Industrial Ecology,2017,21(S1):216-229 Peng, Shitong,Li, Tao,Dong, Mengmeng,Shi, Junli,Zhang, Hongchao.Life cycle assessment of a large-scale centrifugal compressor: A case study in China[J],JOURNAL OF CLEANER PRODUCTION,2016,139:810-820 Peng, Shitong,Tang, Zijue,Shi, Junli,Zhang, Hongchao,Li, Tao.Comparative life cycle assessment of remanufacturing cleaning technologies[J],JOURNAL OF CLEANER PRODUCTION,2016,137:475-489 Liu, Zhichao,Jiang, Qiuhong,Zhang, Hongchao,Xu, Binshi,Dong, Shiyun,Yan, Shixing,Li, Tao.Environmental benefits of remanufacturing: A case study of cylinder heads remanufactured through l[J],JOURNAL OF CLEANER PRODUCTION,2016,133:1027-1033 Liu, Zhichao,Ning, Fuda,Cong, Weilong,Jiang, Qiuhong,Li, Tao,Zhang, Hongchao,Zhou, Yingge.Energy Consumption and Saving Analysis for Laser Engineered Net Shaping of Metal Powders[J],ENERGIES,2016,9(10) 陈俊超,孔露露,徐敬通,李涛,张洪潮.数控机床切削比能建模及其参数影响分析[J],组合机床与自动化加工技术,2016,1:24-28,32 李涛,张洪潮.Comparative lifecycle assessment of remanufacturing cleaning technologies[J],ournal of Cleaner Production,2016,137(0):475-489 高旺,李涛,彭世通,王亮,张洪潮.Optimal Timing and Recycling Operation Mode for Electro-Mechanical Products Active Remanufacturing[J],Frontiers of Engineering Management,2016,3(2):115-121 Shi J.,Liu Z.,Zhang H.,Jiang Q.,Li T..Life cycle assessment: State of the art and future perspectives[J],Recent Patents on Mechanical Engineering,2015,8(3):211-221 Shi, Junli,Li, Tao,Zhang, Hongchao,Peng, Shitong,Liu, Zhichao,Jiang, Qiuhong.Energy consummation and environmental emissions assessment of a refrigeration compressor based on [J],INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT,2015,20(7):947-956 张洪潮,孔露露,李涛,陈俊超.切削比能模型的建立及参数影响分析[J],中国机械工程,2015,26(8):1098-1104 Shi, Junli,Li, Tao,Liu, Zhichao,Zhang, Hongchao,Peng, Shitong,Jiang, Qiuhong,Yin, Jinsong.Life Cycle Environmental Impact Evaluation of Newly Manufactured Diesel Engine and Remanufactured [A],2015,29:402-407 Peng, Shitong,Li, Tao,Shi, Junli,Zhang, Hongchao.Simplified Life Cycle Assessment and Analysis of Remanufacturing Cleaning Technologies[A],2015,29:810-815 张应中,张洪潮,李涛,刘伟嵬,刘淑杰.机械工程类本科专业可持续发展知识教学探讨[J],教育教学论坛,2015,3:143-144 李涛,张洪潮.Comparative in engines diesel and gas liquefied natural Cycle Assessment of remanufactured China[J],Journal of Cleaner Production,2015,101(0):129-136 张应中,刘伟嵬,刘淑杰,李涛.融合可持续发展知识的机械工程类本科教学[J],教育教学论坛,2015,3:143-144 Shi J.,Li T.,Liu Z..A three-dimensional method for evaluating the remanufacturability of used engines[J],International Journal of Sustainable Manufacturing,2015,3(4):363-388 Jiang, Qiuhong,Li, Tao,Liu, Zhichao,Zhang, Hongchao,Ren, Keda.Life Cycle Assessment of an Engine with Input-Output Based Hybrid Analysis Method[J],JOURNAL OF CLEANER PRODUCTION,2014,78:131-138 Liu, Zhichao,Li, Tao,Jiang, Qiuhong,Zhang, Hongchao.Life Cycle Assessment-based Comparative Evaluation of Originally Manufactured and Remanufactured D[J],JOURNAL OF INDUSTRIAL ECOLOGY,2014,18(4,SI):567-576 Jiang, Qiuhong,Liu, Zhichao,Li, Tao,Zhang, Hongchao,Ibal, Asif.Life Cycle Assessment of a Diesel Engine Based on an Integrated Hybrid Inventory Analysis Model[A],2014,15:496-501 Li, Tao,Wang, Fenfen,Zhang, Hong-Chao,Yuan, Chris.Energy and exergy analyses of atomic layer deposition of Al2O3 nano-film process[J],INTERNATIONAL JOURNAL OF EXERGY,2014,15(1):62-75 Pan, Dongqing,Li, Tao,Jen, Tien Chien,Yuan, Chris.Numerical modeling of carrier gas flow in atomic layer deposition vacuum reactor: A comparative st[J],JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A,2014,32(1) Wang, Fenfen,Zhu, Nanjing,Li, Tao,Zhang, Hong-Chao.Material and Energy Efficiency Analysis of Low Pressure Chemical Vapor Deposition of TiO2 Film[A],2014,15:32-37 Liu, Zhichao,Jiang, Qiuhong,Li, Tao,Zhang, Hongchao.An Optimal Timing of Engine Remanufacturing - A Real Option Approach[A],2014,15:223-227 李涛,孔露露,张洪潮,ASIF Iqbal.典型切削机床能耗模型的研究现状及发展趋势[J],机械工程学报,2013,50(7):102-111 李涛,张洪潮.Numerical Simulation on Motion and Diffusion of Carrier Gas Transport Process for Nano-TiO2 Films Pr[A],2012 Li, Tao,Yang, Junfeng,Zhang, Hong-Chao,Yuan, Chris.Chemical Reaction Thermodynamic Model of Low Pressure CVD for Nano-TiO2 Film Preparation[A],2012 Li Tao,Sun Wei,Ma Tie-qiang.Directed Acyclic Graph Version Model Applied in Product Structure Configuration[A],2008,7615-7618 孙伟,高天一,黄玉军,李涛,马铁强.异构三维CAD模型集成转换及共享方法研究[J],计算机应用研究,2008,25(8):2342-2344,2348 Zhong, S.-S.,Li, T..A version management model of PDM system and its realization[J],Journal of Harbin Institute of Technology (New Series),2008,15(4):459-464 孙伟,马铁强,李涛.Constraint Conversation Method in Feature-Based Heterogeneous CAD Model Exchange[J],Information Technology Journal,2008,7(5):783-789

推荐链接
down
wechat
bug