近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
xulei.基准级渐开线测量仪的轮轨蠕滑有限元分析[J],机械设计与制造,2022,5:11-13
娄志峰.基圆盘与导轨间滑移对双盘式渐开线测量仪测量精度的影响[J],光学精密工程,2022,10:2450-2456
xulei.基圆盘圆度误差的测量系统设计[J],计量技术,2022,52(5):62-65
huangqi.多齿分度盘动态分度误差分析[J],振动与冲击,2022,9:172-175
凌四营.控制大平面砂轮磨削面锥形误差提高齿轮螺旋线精度[J],光学精密工程,2022,3:630-637
凌四营.扩大分度盘加工齿坯齿数范围的精密磨齿工艺[J],纳米技术与精密工程,2022,2:179-184
蔡引娣.Development of a Compact Three-Degree-of-Freedom Laser Measurement System with Self-Wavelength ...[J],Applied Sciences Basel,2022,8(11)
王立鼎.Effects of Comprehensive Eccentricity of Involute Cam on Gear Profile Deviations[J],Chinese Journal of Mechanical Engineering,2022,24(3):392-398
蔡引娣.Error Analysis and Compensation of a Laser Measurement System for Simultaneously Measuring Five...[J],SENSORS,2022,19(18)
Xu, Liang.Error Analysis of a Kind of 3D Laser Ball Bar[A],IOP Conference Series: Materials Science and Engineering,2022,627(1)
Fan, Yuchao.Fast volumetric error assessment of a gantry-type machine using multi-degree-of-freedom laser-bas...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022
Zheng, Yuansong.Laser-based precision alignment for multiple span rotary shafts[J],APPLIED OPTICS,2022,60(12):3358-3364
Zheng, Yuansong.The Automatic Measurement System for Harmonic-drive Devices[A],4th International Conference on Design and Manufacturing Engineering,2022,627(1)
娄志峰.Tests for position and orientation errors of axes of a 2D rotary stage[J],MEASUREMENT SCIENCE TECHNOLOGY,2022,31(11)
凌四营.The periodical translocation gear-grinding technique to improve the indexing accuracy of ultra-pr...[A],2022,941-944:2134-2139
王晓东.The Measurement Technology for Precision Peg-in-hole Assembly[A],TENTH INTERNATIONAL SYMPOSIUM ON PRECISION ENGINEERING MEASUREMENTS AND INSTRUMENTATION,2022,11053
Wang, Yue.Ultrasonic Characteristics of Contact Stress of Small Interference Fitting Parts[A],TENTH INTERNATIONAL SYMPOSIUM ON PRECISION ENGINEERING MEASUREMENTS AND INSTRUMENTATION,2022,11053
娄志峰.Two-step Method for Measuring Gear Pitch Deviation[A],8th International Symposium on Precision Engineering Measurements and Instrumentation (ISPEMI),2022,8759
高立嵩.一种新型齿距偏差评价方法研究[J],机械设计与制造,2022,11:18-20
王明海.一种导轨直线度与平行度测量系统的研究与应用[J],现代机械,2022,5:20-24
徐良.三维激光球杆仪的系统误差分析与补偿[J],仪表技术与传感器,2022,3:118-123
王大志.仪器学科研究生培养中“理工融合”的构建[J],教育教学论坛,2022,32:276-277,278
李影.光电水平仪的新型设计与平面度测量[J],现代机械,2022,4:57-62
田雨辰.3D激光球杆仪伸缩导轨运动误差调整与测量[J],现代机械,2022,4:6-11
娄志峰.Adjustment of the measurement point's position in a double-disc instrument for measuring an inv...[J],METROLOGIA,2022,47(5):583-587
刘丽.A five degrees-of-freedom errors measurement system for rotary axis with reference laser for re...[J],REVIEW OF SCIENTIFIC INSTRUMENTS,2022,91(7)
娄志峰.A kind of multi-step method for measuring pitch deviation of a gear[J],MEASUREMENT SCIENCE TECHNOLOGY,2022,23(11)
YuansongZheng.A Measuring Method of Coaxiality Errors for Apart Axis[A],TENTH INTERNATIONAL SYMPOSIUM ON PRECISION ENGINEERING MEASUREMENTS AND INSTRUMENTATION,2022,11053
娄志峰.Analysis of a precise instrument for measuring reference level involute[A],3rd International Symposium on Precision Mechanical Measurements,2022,6280:U608-U613
娄志峰.An Analysis of Angular Indexing Error of a Gear Measuring Machine[J],Applied Sciences Basel,2022,8(2)
娄志峰.An Embedded Sensor System for Real-Time Detecting 5-DOF Error Motions of Rotary Stages[J],SENSORS,2022,19(13)
Wang, Xingyuan.A new analytical method for press-fit curve prediction of interference fitting parts[J],JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2022,250:16-24
Huang, Yubin.An Innovative Dual-Axis Precision Level Based on Light Transmission and Refraction for Angle Me...[J],Applied Sciences Basel,2022,10(17)
Huang, Y. B..A novel modeling of volumetric errors of three-axis machine tools based on Abbe and Bryan princ...[J],INTERNATIONAL JOURNAL OF MACHINE TOOLS MANUFACTURE,2022,151
娄志峰.Application of Monte Carlo Method for Analyzing Reference Involute's Measurement Accuracy[A],6TH INTERNATIONAL SYMPOSIUM ON PRECISION ENGINEERING MEASUREMENTS AND INSTRUMENTATION,2022,7544
娄志峰.A Precision Press-fit Instrument for Assembling Small Parts[A],NINTH INTERNATIONAL SYMPOSIUM ON PRECISION ENGINEERING MEASUREMENTS AND INSTRUMENTATION,2022,9446
娄志峰.A self-calibration method for rotary tables' five degrees-of-freedom error motions[J],MEASUREMENT,2022,174
任同群.Automatic Deformation Measurement Equipment for PZT Wafer[A],IOP Conference Series: Materials Science and Engineering,2022,627(1)
Wang, Xingyuan.Automatic press-fit assembly of small precision interference fitting parts: armature of electro...[J],ASSEMBLY AUTOMATION,2022,39(5):986-998
凌四营.Closure measuring technique on the datum of an end-tooth indexing table[J],MEASUREMENT SCIENCE TECHNOLOGY,2022,23(4)
蔡引娣.Construction of a system for simultaneous measurements of the diameter and roundness of ball[A],6th International Conference on Nanomanufacturing,2022
蔡引娣.Correction of the laser diode wavelength by grating diffraction effect[A],The 7th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2017),2022
罗怡.玻璃微流控芯片的制作[J],纳米技术与精密工程,2022,1:20-23
罗怡.电沉积技术制作高聚物微流控芯片模具[J],电化学,2022,11(2):204-207
凌四营.磨齿机分度误差传递规律[J],光学精密工程,2022,8:1934-1939
凌四营.磨齿机床分度误差传递规律[J],光学精密工程,2022,24(8):109-114
赵壮.符合阿贝原则的数控机床几何误差建模[J],光学精密工程,2022,28(4):885-897
娄志峰.精密微小组件压装技术及仪器[J],光学精密工程,2022,6:1605-1611
王立鼎.精密、超精密圆柱渐开线齿轮的加工方法[J],光学精密工程,2022,2:321-326
娄志峰.Measurement errors caused by radius deviation of base disc in double-disc instrument for measur...[J],MEASUREMENT SCIENCE TECHNOLOGY,2022,22(11)
娄志峰.转子质心微位移精密调整装置[J],传感器技术,2022,5:130-133
马勇.Measuring instrument for radial composite deviations of high-precision master gear[A],6th International Symposium on Precision Engineering Measurements and Instrumentation,2022,7544
马勇.Measuring technology for runout of high-precision master gear[A],7th International Symposium on Precision Engineering Measurements and Instrumentation (ISPEMI),2022,8321
王同祥.超精密标准齿轮径向综合偏差测试系统的研究[J],机械传动,2022,4:5-8
王立鼎.超精密渐开线齿形的测量方法[J],光学精密工程,2022,6:980-985
凌四营.超精密齿距偏差测量中测点位置的误差补偿[J],仪器仪表学报,2022,3:691-696
凌四营.Optimal forming principle and grinding experiment of the ultra-precision involute profile[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B JOURNAL OF EN,2022,227(B3):375-382
娄志峰.Prediction of pressing quality for press fit assembly based on press fit curve and maximum pressi...[J],International Journal of Aerospace Engineering,2022,15(823019)
You, Bo.Prediction of Pressing Quality for Press-Fit Assembly Based on Press-Fit Curve and Maximum Pres...[J],International Journal of Aerospace Engineering,2022,2015
Wang, Xingyuan.Prediction of stress distribution in press-fit process of interference fit with a new theoretic...[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C JOURNAL OF ME,2022,233(8):2834-2846
娄志峰.Precision assembly method of a kind of small interference fitting parts[J],SADHANA ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES,2022,44(6)
Fan, Yuchao.Self-compensation method for dual-beam roll angle measurement of linear stages[J],OPTICS EXPRESS,2022,29(17):26340-26352
马勇.Study on the effect of ways of gear relief on contact force of teeth face[A],2nd International Conference on Advances in Materials and Manufacturing Processes (ICAMMP 2011),2022,415-417:66-70
张伟超.过盈连接组件超声辅助压装减摩分析[J],现代机械,2022,4:1-5
许崇林.过盈连接组件超声辅助压装装置及技术[J],现代机械,2022,4:1-3,106
王兴远.过盈配合应力分布超声测量与连接力预测[J],推进技术,2022,40(12):2827-2836
张广威.陀螺转子动平衡精密调整方法?[J],组合机床与自动化加工技术,2022,12:27-29,34
张锋.陀螺转子质心调整中的爬行机理与改善[J],机械工程与自动化,2022,6:12-14
宋洪侠.降低齿轮齿距累积偏差的方法[J],光学精密工程,2022,8:1796-1801
娄志峰.齿距偏差测量中系统误差的分离方法[J],纳米技术与精密工程,2022,6:537-540
郭宝余.齿轮全齿面偏差的拟合及分离技术[A],2014中国国际齿轮产业大会,2022,114-116,130
郭宝余.齿轮全齿面偏差的拟合及分离技术[J],机械传动,2022,38(10):114
凌四营.高等级渐开线样板精密磨削实验研究[J],大连理工大学学报,2022,4:508-513
李树伟.双盘式渐开线测试仪无回差传递杠杆的设计[J],机械传动,2022,3:31-33
郝炎辉.双盘式渐开线测试仪齿廓偏差测量的采样分析[J],机械科学与技术,2022,11:1394-1397
娄志峰.双盘式渐开线测量仪数据采集与控制系统的研制[J],仪器仪表学报,2022,1:61-64
娄志峰.双盘式渐开线测量仪测点位置调整方式[J],光学精密工程,2022,10:1553-1557
王立鼎.双盘式渐开线测量仪精度分析[J],计量学报,2022,5:393-398
娄志峰.圆光栅配合自准直仪测量主轴径向运动误差[J],光学精密工程,2022,27(9):2053-2061
郝炎辉.基于VC++6.0的双盘式渐开线测试仪齿廓偏差测量控制系统设计[J],工业控制计算机,2022,21(1):7-8
京公网安备 11010802027423号