近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
华顺刚.Direct manipulation of 3D mesh deformation[A],3rd International Symposium on Information Science and Engineering, ISISE 2010,2022,202-206
Huang, Liu.Drop impact on elastic superhydrophobic films: From pancake bouncing to saucer bouncing[J],MATERIALS LETTERS,2022,285
苏铁明.Efficient Computing Resource Utilization in Network Collaborative Design[A],Proceedings of the 8th International Conference on Frontiers of Design and Manufacturing,2022,526-538
yangchen.Energy conversion based on superhydrophobic surfaces[J],PHYSICAL CHEMISTRY CHEMICAL PHYSICS,2022,22(44):25430-25444
华顺刚.Fast image retargeting based on strip dividing and resizing[J],Journal of Systems Engineering and Electronics,2022,25(6):1072-1081
Yu S..Image and video retargeting using Graph Cuts[A],2010 International Conference on Intelligent Control and Information Processing, ICICIP 2010,2022,PART 2:334-339
华顺刚.Image deformation based on cubic splines and moving least squares[A],2009 International Conference on Computational Intelligence and Software Engineering, CiSE 2009,2022
刘欣.Investigating the effect of water-mixing nitrogen atmospheric pressure plasma jet on polyether-et...[J],JOURNAL OF APPLIED POLYMER SCIENCE,2022,138(25)
Huang, Gangjin.Just Another Attention Network for Remaining Useful Life Prediction of Rolling Element Bearings[J],IEEE Access,2022,8:204144-204152
张军.Kernel scatter-difference based discriminant locality preserving projection for image recognition[J],Journal of Information and Computational Science,2022,5(6):2537-2544
刘迪.IR and visible-light face recognition using canonical correlation analysis[J],Journal of Computational Information Systems,2022,5(1):291-298
Ren, Shenzhuang.Maintenance of superhydrophobic concrete for high compressive strength[J],JOURNAL OF MATERIALS SCIENCE,2022,56(7):4588-4598
Zhang Jing.View synthesis based on the serial images from camera lengthways motion[J],Journal of Systems Engineering and Electronics,2022,17(2):284-289
华顺刚.Vehicle body structural parameter optimization based on dynamics simulation[A],International Conference on Advanced Technology of Design and Manufacture, ATDM 2010,2022,2010(576 CP):51-55
华顺刚.3D Model Retrieval Based on Multi-View SIFT Feature[A],2011 International Conference on Electric and Electronics (EEIC 2011),2022,163-170
Dong, Jiannan.A Joint Optimization Algorithm Using Adaptive Minimum Coset Number Based Discrete Multi-Coset S...[J],IEEE Access,2022,8:168659-168670
华顺刚.Analysis of the mechanism for averaging and reversing the velocity of rotation for hydro-mechanic...[J],Ji Xie She Ji Yu Yian Jiu/Machine Design and Research,2022,14(3):47-48
刘斌.An automatic segmentation system of acetabulum in sequential CT images for the personalized art...[J],COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE,2022,127:318-335
刘斌.A personalized ellipsoid modeling method and matching error analysis for the artificial femoral...[J],COMPUTER AIDED DESIGN,2022,56:88-103
华顺刚.Assembly model retrieval combining parts-level and global-level parameter descriptions[J],Computer-Aided Design and Applications,2022,19(1):26-37
Song, Weiwei.Automatic measurement of morphological parameters of hip joint from CT images[A],2nd International Conference on Bioinformatics and Biomedical Engineering, iCBBE 2008,2022,2382-2385
华顺刚.Beam layout optimization for vehicle body stiffness[A],Advanced materials research,2022,548:667-671
Song, Weiwei.Modeling for Rehabilitation of Collapsing Femoral Head Based on 3D Statistical Shape Knowledge[A],3rd International Conference on Bioinformatics and Biomedical Engineering,2022,2231-+
Song, Weiwei.Octree based representation and volume rendering of three-dimensional medical data sets[A],1st International Conference on Biomedical Engineering and Informatics,2022,1:316-+
华顺刚.Photographs alignment and high dynamic range image composition based on varying exposure levels[A],ADVANCES IN ARTIFICIAL REALITY AND TELE-EXISTENCE, PROCEEDINGS,2022,4282:1146-+
华顺刚.Practice of Teaching Reform and Curriculum Construction Aiming at Cultivating Student’s Programm...[A],The 3rd International Annual Conference on Teaching Management and Curriculum Construction,2022,106-110
刘伟伟.Review on scanning pattern evaluation in laser-based additive manufacturing[J],OPTICAL ENGINEERING,2022,60(7)
华顺刚.Similarity criterion for image resizing[J],EURASIP Journal on Advances in Signal Processing,2022
华顺刚.Similarity measure for image resizing using SIFT feature[J],EURASIP Journal on Image and Video Processing,2022,2012(1):1-11
华顺刚.Study on the theoretical rules governing continuous stageless hydro-mechanical synthetic transmis...[J],Binggong Xuebao/Acta Armamentarii,2022,18(1):1-4
华顺刚.Direct Manipulation of 3D Mesh Deformation[A],Third International Symposium on Information Science and Engineering,2010,202-206
Liu, Dianting.Face recognition using hierarchical isomap[A],5th IEEE Workshop on Automatic Identification Advanced Technologies,2007,103-+
华顺刚.一种基于条分割及缩放的图像重定算法[J],大连理工大学学报,2013,6:824-830
杨眉.一种基于神经网络的扇贝图像识别方法[J],大连海洋大学学报,2014,1:70-74
魏鸿磊.一种采用脊线特征的指纹模糊匹配方法[J],智能系统学报,2012,07(3):235-240
华顺刚.一种基于角点检测的图像密集匹配算法[J],计算机工程与设计,2007,28(5):1092-1095
李涛.一种新的敏感数字水印技术[J],小型微型计算机系统,2001,22(7):842-844
华顺刚.一种快速的柱面全景图像拼接算法[J],数据采集与处理,2006,21.0(4):434-438
华顺刚.一种改进的Hough变换算法及图象特征点提取[A],第十一届全国图象图形学术会议,2003,153-156
华顺刚.一种改进的Hough变换算法及图象特征点提取[J],中国图象图形学报,2003,8(z1):153-156
陈伟卿.互信息医学图像配准中PV插值算法的改进[J],计算机工程与应用,2010,20:113-115
唐旭晟.人脸识别中基于互信息的特征优选[J],大连理工大学学报,2008,1:84-89
张建新.低定位精度条件下掌纹图像识别[J],大连理工大学学报,2010,3:356-361
华顺刚.利用Autolisp及DCL语言建立机械零件图形库[J],机械工程师,1998,06:52-53
华顺刚.利用控制曲线和移动最小二乘法实现图像变形[J],小型微型计算机系统,2010,11:2251-2254
华顺刚.利用梯度与人体区域信息的图像分条及缩放[J],计算机辅助设计与图形学学报,2014,7:1167-1175
华顺刚.利用移动最小二乘法实现图像变形[J],计算机应用,2009,1:71-73
华顺刚.AutoCAD中有关字符处理问题的解决方法和技巧[J],微型电脑应用,2000,2:54-55
华顺刚.AutoCAD图象菜单设计与应用[J],机械设计与制造,1999,03:40
何清刚.AutoCAD环境下哑图数据的自动替换[J],工程设计CAD与智能建筑,1999,06:32-34
雷康华.Bi-RRT算法在装配序列生成中的应用[J],电脑知识与技术,2015,21:160-164
白茂东.组件匹配与融合的三维形状建模研究[J],大连理工大学学报,2017,3:241-246
戴恒震.绝缘纸板微水分测量传感器的接触压力研究[J],传感器技术,2008,27(11):57-59
王丽丹.自适应阈值SSDA图像匹配拼接算法的研究[J],光电技术应用,2006,21(3):54-57,72
杨淑德.装箱布局三维可视化控件开发[J],港口装卸,2016,2:8-13
华顺刚.车用液压机械综合传动系转速平均反向机构分析[J],机械设计与研究,1998,03:44-46+5
高兆法.Pro/ENGINEER特征造型分析与应用[J],工程设计CAD与智能建筑,1999,08:52-54
华顺刚.零件模型的铸件毛坯自动生成方法[J],计算机集成制造系统,2018,24(11):2827-2835
华顺刚.面向局部突起的三维网格分割算法研究[J],机械工程师,2019,1:1-4
华顺刚.高动态范围图像及其色彩迁移[J],计算机工程与应用,2008,8:63-66
京公网安备 11010802027423号