当前位置: X-MOL首页全球导师 国内导师 › 马建伟

个人简介

教育经历 2002.9 - 2006.7 大连理工大学 机械设计制造及其自动化 学士 2006.9 - 2011.11 大连理工大学 机械电子工程 博士 2002.9 - 2006.7 大连理工大学 机械设计制造及其自动化 学士 1999.9 - 2002.7 山西省晋城市晋城一中 无 工作经历 2014.12 - 至今 大连理工大学机械工程学院 副教授 2013.11 - 2014.12 大连理工大学机械工程学院 讲师 2011.10 - 2013.11 大连理工大学机械工程学院 师资博士后

研究领域

机器人辅助加工规划及控制 激光精密加工与过程控制 难加工材料曲面加工与过程控制

近期论文

查看导师新发文章 (温馨提示:请注意重名现象,建议点开原文通过作者单位确认)

Ma, Jian-wei,Chen, Si-yu,Li, Guan-lin,Qu, Zi-wen,Lu, Xiao.Study on tool orientation feasible region with constraint of non-linear error for high-precision f[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2020,106(9-10):4169-4181 Ma, Jian-wei,Lu, Xiao,Li, Guan-lin,Qu, Zi-wen,Qin, Feng-ze.Toolpath topology design based on vector field of tool feeding direction in sub-regional processin[J],JOURNAL OF MANUFACTURING PROCESSES,2020,52:44-57 王福吉,胡海波,张博宇,马建伟,赵猛.复合材料成型分层缺陷在钻削横刃挤压阶段的扩展行为[J],机械工程学报,2018,55(11):197-204 司立坤,马建伟,贾振元,刘鑫,王瑞利.激光干涉仪测量机床精度的准直调节技巧[J],实验室科学,2018,21(5):72-74,78 司立坤,马建伟,贾振元,崔岩,孙晶.创新型实践课层次化教学模式探讨[J],实验室科学,2018,21(5):124-126 马建伟,司立坤,刘冲,崔岩,李经民,孙晶.全日制专业学位硕士的工程实践课程创新模式[J],实验室科学,2018,21(5):152-155 Song, De-Ning,Ma, Jian-Wei,Jia, Zhen-Yuan,Qin, Feng-Ze,Zhao, Xiao-Xuan.Synergistic real-time compensation of tracking and contouring errors for precise parametric curved[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE,2018,232(19):3367-3383 Wang, Fu-ji,Yin, Jun-wei,Ma, Jian-wei,Niu, Bin.Heat partition in dry orthogonal cutting of unidirectional CFRP composite laminates[J],COMPOSITE STRUCTURES,2018,197:28-38 Ma, Jianwei,Gao, Yuanyuan,Jia, Zhenyuan,Song, Dening,Si, Likun.Influence of spindle speed on tool wear in high-speed milling of Inconel 718 curved surface parts[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE,2018,232(8):1331-1341 刘巍,严洪悦,李肖,李辉,马建伟.机床动态检测中的高速图像运动去模糊还原[J],仪器仪表学报,2018,39(05):224-232 马建伟,司立坤,孙士勇,郭晓光,杨睿.“机械精度设计与检测技术”教学改革与实践[J],实验室科学,2018,21(2):122-124,127 司立坤,马建伟,王福吉,刘巍.慕课在实验室管理中的应用探索[J],实验室科学,2018,21(2):180-182 Ma, Jian-wei,Hu, Guo-qing,Jia, Zhen-yuan,Zhang, Ning,Wang, Fu-ji.Effect of geometric feature and cutting direction on variation of force and vibration in high-spee[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2018,95(5-8):2207-2218 司立坤,崔岩,马建伟,闫英,周平.慕课在机械精度实验课中的应用[J],实验室科学,2018,21(1):130-132 Jia, Zhen-Yuan,Song, De-Ning,Ma, Jian-Wei,Zhao, Xiao-Xuan,Zhang, Ning.Real-Time Contour-Error Estimation Methods for Three-Dimensional Free-Form Parametric Curves in Co[J],INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING,2018,19(2):173-182 王福吉,殷俊伟,贾振元,马建伟,王东,徐震宇.CFRP复合材料铣削力、温度及表层损伤分析[J],机械工程学报,2018,54(3):186-195 马建伟,张宁,陈思宇,苏伟伟,胡国庆. Deformation analyzing for thin-walled parts based on analysis of single-tooth or multi-tooth millin[J],International Journal of Machining and Machinability of Materials,2018,20(6):575-593 王福吉,闫建博,马建伟,王泽刚,王帅飞,成德,张博宇.Reversed-air cooling technology for high-quality drilling of CFRP[J],Applied composite materials,2018,录用 贾振元,白玉,王福吉,马建伟,张中标,成德.Effect of drill flute direction on delamination at the exit in drilling Carbon Fiber Reinforced Plas[J],Polymer composites,2018,录用 王福吉,胡海波,张博宇,马建伟,赵猛.复合材料成型分层缺陷在钻削横刃挤压阶段的扩展行为[J],机械工程学报,2018,录用 Ma, Jian-wei,Su, Wei-wei,Jia, Zhen-yuan,Song, De-ning,Hu, Guo-qing.An optimization method of tool-path parameters for curved surface by construction of cutter locati[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2018,94(1-4):701-710 Qin, Ji-yun,Jia, Zhen-yuan,Ma, Jian-wei,Song, De-ning,Si, Li-kun.Kinematical performance prediction method for rotary axes of 5-axis machine tool in processing of co[J],International Journal of Industrial and Systems Engineering,2018,28(2):178-192 Ma, Jian-Wei,Jia, Zhen-Yuan,Song, De-Ning,Qin, Feng-Ze,Zhao, Xiao-Xuan,Si, Li-Kun.Milling force-based machining parameter optimisation for titanium-alloy surface[J],International Journal of Machining and Machinability of Materials,2018,20(1):64-77 Ma, Jian-Wei,Song, De-Ning,Jia, Zhen-Yuan,Zhang, Ning,Hu, Guo-Qing,Su, Wei-Wei.ADAPTIVE PRE-COMPENSATION OF THE CONTOURING ERROR FOR HIGH-PRECISION PARAMETRIC CURVED CONTOUR FOL[A],2018 Ma, Jian-Wei,Song, De-Ning,Gao, Yuan-Yuan,Jia, Zhen-Yuan.Reduction of the Contouring Error in High-Feed-Speed Machining by Real-Time Tracking-Error Compens[A],2018,470-476 张鑫,马建伟,贾振元,宋得宁.Machining parameter optimisation for aviation aluminium-alloy thin-walled parts in high-speed millin[J],International Journal of Machining and Machinability of Materials,2018,20(2):180-192 任宗金,张军,孙晶,崔岩,马建伟,陈星,温锋.面向工程专业认证的大学生实践能力评价方法研究[J],山东农业工程学院学报,2017,34(12):11-12 王福吉,郭会彬,贾振元,马建伟,成德,胡海波.玻璃纤维增强聚丙烯复合材料制孔损伤[J],复合材料学报,2017,35(8):2023-2031 Ma, Jian-Wei,Song, De-Ning,Jia, Zhen-Yuan,Hu, Guo-Qing,Su, Wei-Wei,Zhang, Ning.Adaptive pre-compensation of the contouring error for high-precision parametric curved contour follo[A],2017,4B-2017 Jia ZhenYuan,Song DeNing,Ma JianWei,Zhao XiaoXuan,Su WeiWei.Adaptive estimation and nonlinear variable gain compensation of the contouring error for precise p[J],SCIENCE CHINA-TECHNOLOGICAL SCIENCES,2017,60(10):1494-+ Ma, Jian-wei,Jia, Zhen-yuan,Song, De-ning,Su, Wei-wei,Hu, Guo-qing,Si, Li-kun.High-adaptable prediction method of flat-end milling force based on material properties for diffic[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2017,92(1-4):1493-1506 Wang, Fu-ji,Yin, Jun-wei,Ma, Jian-wei,Jia, Zhen-yuan,Yang, Fan,Niu, Bin.Effects of cutting edge radius and fiber cutting angle on the cutting-induced surface damage in ma[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2017,91(9-12):3107-3120 Ma, Jian-wei,Liu, Zhen,Jia, Zhen-yuan,Song, De-ning,Gao, Yuan-yuan,Si, Li-kun.Stability recognition for high-speed milling of TC4 thin-walled parts with curved surface[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2017,91(5-8):2819-2829 Jia, Zhen-yuan,Song, De-ning,Ma, Jian-wei,Hu, Guo-qing,Su, Wei-wei.A NURBS interpolator with constant speed at feedrate-sensitive regions under drive and contour-err[J],INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE,2017,116:1-17 Song, De-ning,Ma, Jian-wei,Jia, Zhen-yuan,Gao, Yuan-yuan.Estimation and compensation for continuous-path running trajectory error in high-feed-speed machin[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2017,89(5-8):1495-1508 马建伟.Contouring-error reduction by combination of tracking-error compensation and cross-coupled control[A],2017,565-574 王福吉,马建伟,贾振元,牛斌.Effects of cutting edge radius and fiber cutting angle on the cutting-induced surface damage formati[J],The International Journal of Advanced Manufacturing Technology,2017,91(9-12):3107-3120 Jia Zhenyuan,Gao Yuanyuan,Ma Jianwei,Song Dening.Pre-compensation for continuous-path running trajectory error in high-speed machining of parts wit[J],CHINESE JOURNAL OF MECHANICAL ENGINEERING,2017,30(1):37-45 王福吉,贾振元,牛斌,马建伟.Modelling of Cutting Induced Heat Partition for CFRP Composites[A],2017 Ma, Jian-Wei,Wang, Fu-Ji,Jia, Zhen-Yuan,Gao, Yuan-Yuan.Machining Parameter Optimization in High-Speed Milling for Inconel 718 Curved Surface[J],MATERIALS AND MANUFACTURING PROCESSES,2016,31(13):1692-1699 Jia, Zhen-yuan,Ge, Jie,Ma, Jian-wei,Gao, Yuan-yuan,Liu, Zhen.A new cutting force prediction method in ball-end milling based on material properties for difficu[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2016,86(9-12):2807-2822 Ma, Jian-wei,Jia, Zhen-yuan,Wang, Fu-ji,Gao, Yuan-yuan,Liu, Zhen.A new cutting force modeling method in high-speed milling of curved surface with difficult-to-mach[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2016,84(9-12):2195-2205 Gao, Yuan-yuan,Ma, Jian-wei,Jia, Zhen-yuan,Wang, Fu-ji,Si, Li-kun,Song, De-ning.Tool path planning and machining deformation compensation in high-speed milling for difficult-to-m[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2016,84(9-12):1757-1767 Zhao, Kai,Jia, Zhenyuan,Liu, Wei,Ma, Jianwei,Ding, Lichao.Burr Control for Removal of Metal Coating from Plastics Substrate by Micro-Milling[J],MATERIALS AND MANUFACTURING PROCESSES,2016,31(5):641-647 马建伟,贾振元,王福吉.new cutting force modeling method in high-speed milling of curved surface with difficult-to-machine [J],The International Journal of Advanced Manufacturing Technology,2016,84(9-12):2195-2205 许强,贾振元,马建伟.基于Open CASCADE的复杂曲面零件快速分割[J],制造业自动化,2015,8:26-27,32 马建伟,贾振元,王福吉,王泠,许强.局部几何特征急变类零件分区变参工艺制定方法[J],机械工程学报,2015,51(11):109-115 Zhao, Kai,Jia, Zhenyuan,Liu, Wei,Ma, Jianwei,Wang, Ling.Material removal with constant depth in CNC laser milling based on adaptive control of laser fluen[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2015,77(5-8):797-806 Ma J.,Wang F.,Jia Z.,Wei W..A new planning method for sample points of free-form curved surface[J],International Journal of Computer Applications in Technology,2015,52(1):39-47 Ma J.-W.,Qin J.-Y.,Jia Z.-Y.,Ding L.-C.,Wang F.-J..Control method of tool axis vector based on kinematics characteristics for five-axis NC machining[J],International Journal of Mechatronics and Manufacturing Systems,2015,8(1-2):49-62 Ma J.-W.,Jia Z.-Y.,Wang F.-J.,Liu W..Geometric parameters interval estimation of hydraulic valve by combining interval grey correlation a[J],International Journal of Industrial and Systems Engineering,2015,20(1):84-103 Zhao, Kai,Jia, Zhenyuan,Ma, Jianwei,Liu, Wei,Wang, Ling.Nanosecond multi-pulse laser milling for certain area removal of metal coating on plastics surface[J],OPTICS AND LASERS IN ENGINEERING,2014,63:58-69 贾振元,赵凯,刘巍,王泠,丁立超,马建伟.工程塑料表面金属覆层的激光定域精细去除技术[A],2014,43-53 刘巍,任宗金,马建伟,王殿龙.《机械工程测试技术》研究型教学模式改革探讨[J],科技创新导报,2014,11(9):95-96 Ma, Jian-wei,Jia, Zhen-yuan,Wang, Fu-ji,Ning, Fu-da.Spindle Speed Selection for High-Speed Milling of Titanium Alloy Curved Surface[J],MATERIALS AND MANUFACTURING PROCESSES,2014,29(3):364-369 刘巍,马建伟,贾振元.Precise tool setting method for CNC machining compound spiral antenna based on binocular micro stere[A],2014,175-175 马建伟,贾振元,王福吉.Research of discrete curvature estimation method based on local space parabola[A],2014,577:802-805 马建伟,贾振元,王福吉.Surface re-design modelling technology for parts with complex curved surface based on performance co[A],2014 Jia, Zhen-yuan,Ma, Jian-wei,Wang, Fu-ji,Ding, Yi-ming.Investigation of a measurement scheme based on IGES[J],MEASUREMENT,2014,47(1):658-668 Ning, Fu-da,Wang, Fu-ji,Ma, Jian-wei.A New Modeling Method for Cutting Forces in Side Milling of Aluminum Alloy[A],2014,420-424 Ma J.-W.,Wang F.-J.,Jia Z.-Y.,Wei W.-L..Research on sample point repairing for free-form curved surface[J],International Journal of Modelling, Identification and Control,2014,22(2):178-184 Ning F.,Wang F.,Jia Z.,Ma J..Chip morphology and surface roughness in high-speed milling of nickel-based superalloy Inconel 718[J],International Journal of Machining and Machinability of Materials,2014,15(3-4):285-299 Jia Z.,Zhao K.,Liu W.,Ma J.,Wang L..Nanosecond pulsed laser processing circuits on the copper clad polyimide[J],International Journal of Machining and Machinability of Materials,2014,15(3-4):157-173 贾振元,王永青,王福吉,马建伟,郭东明.高性能复杂曲面零件测量-再设计-数字加工一体化加工方法[J],机械工程学报,2013,49(19):126-132 马建伟,王福吉,贾振元,刘巍.Precision coupling system modelling based on rough set and support vector machine[J],International Journal of Service and Computing Oriented Manufacturing,2013,1(1):92-102 王福吉,贾振元,马建伟.Generation of geometric measurement collision-free path for curved part[A],2013,421:427-432 Ma, Jian-wei,Jia, Zhen-yuan,Wang, Fu-ji,Ding, Yi-ming.Sampling of IGES trimmed surface for an online inspection system[J],INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY,2013,46(4):232-243 Wang F.,Ma J.,Song D.,Liu W.,Lu X..Research on repair operators in the whole space search genetic algorithm of assembly job shop schedu[A],2012,1922-1927 Ma J.-W.,Wang F.-J.,Jia Z.-Y..A mathematical model for design problem of hydraulic valve product[J],International Journal of Industrial and Systems Engineering,2012,11(4):331-349 马建伟,贾振元,王福吉,刘巍,卢晓红.主成分分析在偶件多影响因素重构中的应用[J],机械设计与研究,2010,26(5):122-125 马建伟,贾振元,王福吉,刘巍.液压阀件特性预测系统开发[J],组合机床与自动化加工技术,2010,9:56-59 贾振元,马建伟,刘巍,王福吉.多几何要素影响下液压阀件特性的混合神经网络预测模型[J],机械工程学报,2010,46(2):126-131 马建伟,贾振元,魏伟力.基于ANSYS的发射器挡板疲劳分析[J],装备制造技术,2009,11:9-11 贾振元,马建伟,王福吉,刘巍.多零件几何要素影响下的装配产品特性预测方法[J],机械工程学报,2009,45(7):168-173

推荐链接
down
wechat
bug