当前位置: X-MOL首页全球导师 国内导师 › 周平

个人简介

教育经历 2003.82001.2大连理工大学工程力学博士 1999.82003.7大连理工大学工程力学学士 1996.91999.7浙江省余姚市余姚中学 工作经历 2019.12至今 机械工程学院教授 2013.1至今机械工程学院副教授 2010.12012.12机械工程学院讲师

研究领域

(1)高性能制造理论与技术 (2)精密/超精密加工技术 (3)原子与近原子尺度制造理论与方法 (4)智能制造技术 (5)机械基础件制造原理与工艺

近期论文

查看导师新发文章 (温馨提示:请注意重名现象,建议点开原文通过作者单位确认)

周平.化学机械平坦化中晶圆姿态瞬态调整的数值模拟研究[J],机械工程学报,2022,1:199-204,212 王紫光.单晶硅反射镜的超精密磨削工艺[J],光学精密工程,2022,27(5):1087-1095 刘博.非圆胀圈型密封环的设计方法与性能分析[J],北京理工大学学报,2022,3:245-249 单坤.铜电致化学抛光抛光液的成分及其作用[J],机械工程学报,2022,5:88-94 陈霄.Structural optimization design of water-cooling mirror with straight flow channels[J],APPLIED THERMAL ENGINEERING,2022,81:154-160 周平.Simulation of cmp process based on mixed elastohydrodynamic lubrication model with layered elasti...[J],Advanced materials research,2022,565:330-335 周平.Simulation of CMP Process Based on Mixed Elastohydrodynamic Lubrication Model with[A],15th International Symposium on Advances in Abrasive Technology,2022 周平.Sensitivity analysis of the surface integrity of monocrystalline silicon to grinding speed with...[J],Advances in Manufacturing,2022,8(1,SI):97-106 周平.Residual Stress Distribution in Silicon Wafers Machined by Rotational Grinding[J],JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING TRANSACTIONS OF THE ASME,2022,139(8) 王科.Preparation of Flat and Smooth Copper Surface by Jet Electrochemical Machining and Electrochemi...[J],JOURNAL OF THE ELECTROCHEMICAL SOCIETY,2022,167(16) 王林.Physically-based modeling of pad-asperity scale chemical-mechanical synergy in chemical mechani...[J],TRIBOLOGY INTERNATIONAL,2022,138:307-315 陈霄.Numerical study on thermal deformation characteristic of water-cooled mirror with interdigitate...[J],APPLIED THERMAL ENGINEERING,2022,98:357-364 周平.Numerical studies on scavenging reaction in confined etchant layer technique (CELT)[J],JOURNAL OF ELECTROANALYTICAL CHEMISTRY,2022,705:1-7 周平.Nonlinear Compression Behavior of the Grooved Polishing Pad: AModel and Its Validation[J],ECS Journal of Solid State Science and Technology,2022 闫英.Near-field microscopy inspection of nano scratch defects on the monocrystalline silicon surface[J],PRECISION ENGINEERING JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEE,2022,56:506-512 周平.超薄石英片抛光加工胶结固持变形[J],光学精密工程,2022,27(11):2402-2409 任晓.粗糙表面的气体密封性能研究[J],机械工程学报,2022,16:176-181 李治伟.粗糙薄层弹性体接触刚度分析[J],摩擦学学报,2022,1:53-58 周平.电化学机械平坦化抛光垫混合软弹流润滑行为数值研究[J],机械工程学报,2022,7:180-185 左云盛.Cu2+浓度对于铜电致化学抛光过程的影响[A],2016年全国电化学加工技术研讨会,2022,7-12 王林.Chemical-mechanical wear of monocrystalline silicon by a single pad asperity[J],INTERNATIONAL JOURNAL OF MACHINE TOOLS MANUFACTURE,2022,120:61-71 张振宇.A novel approach of chemical mechanical polishing using environment-friendly slurry for mercury...[J],Scientific Reports,2022,6:22466 周平.Analysis of Laminar Flow Over a Non-Conventional Random Rough Surface Based on Lattice Boltzman...[J],JOURNAL OF TRIBOLOGY TRANSACTIONS OF THE ASME,2022,134(1) Shan, Kun.Analysis of the polishing ability of electrogenerated chemical polishing[J],PRECISION ENGINEERING JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEE,2022,47:122-130 林彬.Analytical Elastic Plastic Cutting Model for Predicting Grain Depth-of-Cut in Ultrafine Grindin...[J],JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING TRANSACTIONS OF THE ASME,2022,140(12) 周平.A mixed elastohydrodynamic lubrication model with layered elastic theory for simulation of chem...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,69(5-8):1009-1016 周平.A mixed elastohydrodynamic lubrication model for simulation of chemical mechanical polishing wi...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,77(1-4):107-116 周平.A load identification method for the grinding damage induced stress (GDIS) distribution in sili...[J],INTERNATIONAL JOURNAL OF MACHINE TOOLS MANUFACTURE,2022,107:1-7 Wang, Ziguang.A high-efficient precision grinding for fabricating moderately thick plane mirror (MTPM)[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,96(5-8):2559-2566 Lin, P..A high efficient assembly technique for large proton exchange membrane fuel cell stacks: Part I...[J],JOURNAL OF POWER SOURCES,2022,195(5):1383-1392 Pan, Yuhang.Activation functions selection for BP neural network model of ground surface roughness[J],JOURNAL OF INTELLIGENT MANUFACTURING,2022,31(8):1825-1836 兰天.一种基于等效平行间隙的静密封漏率预测方法[J],润滑与密封,2022,45(3):102-106 周平.Liquid water transport mechanism in the gas diffusion layer[J],JOURNAL OF POWER SOURCES,2022,195(5):1408-1415 Shan, Kun.Electrogenerated chemical polishing of copper[J],PRECISION ENGINEERING JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEE,2022,39:161-166 Li, Weisi.Effects of needle inner surface topography on friction and biopsy length[J],INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2022,119:412-418 黄宁.Elastic recovery of monocrystalline silicon during ultra-fine rotational grinding[J],PRECISION ENGINEERING JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEE,2022,65:64-71 闫英.Effect of substrate curvature on thickness distribution of polydimethylsiloxane thin film in sp...[J],Chinese Physics B,2022,27(6) 周平.Effect of nonuniformity of the contact pressure distribution on the electrical contact resistan...[J],INTERNATIONAL JOURNAL OF HYDROGEN ENERGY,2022,36(10):6039-6044 王科.Effect of cupric ion concentration on the etching behavior of copper in Electrogenerated Chemic...[J],PRECISION ENGINEERING JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEE,2022,55:70-76 Hu, Rui.Design Optimization Method for Additive Manufacturing of the Primary Mirror of a Large-Aperture...[J],JOURNAL OF AEROSPACE ENGINEERING,2022,30(3) Wang, Ke.Preparation of Flat and Smooth Copper Surface by Jet Electrochemical Machining and Electrochemi...[J],JOURNAL OF THE ELECTROCHEMICAL SOCIETY,2021,167(16) Pan, Yuhang.Activation functions selection for BP neural network model of ground surface roughness[J],JOURNAL OF INTELLIGENT MANUFACTURING,2021,31(8):1825-1836 Huang, Ning.Elastic recovery of monocrystalline silicon during ultra-fine rotational grinding[J],PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY,2021,65:64-71 Zhou, Ping,Wang, Zi-Guang,Yan, Ying,Huang, Ning,Kang, Ren-Ke,Guo, Dong-Ming.Sensitivity analysis of the surface integrity of monocrystalline silicon to grinding speed with...[J],ADVANCES IN MANUFACTURING,2020,8(1,SI):97-106 Wang, Lin,Zhou, Ping,Yan, Ying,Kang, Renke,Guo, Dongming.Physically-based modeling of pad-asperity scale chemical-mechanical synergy in chemical mechani...[J],TRIBOLOGY INTERNATIONAL,2019,138:307-315 王紫光,康仁科,周平,高尚,董志刚.单晶硅反射镜的超精密磨削工艺[J],光学精密工程,2019,27(5):1087-1095 周向波度密封环预变形平面研磨加工中的变形分析,2019 Three-point bending Young’s modulus of nanowires,2019 Effect of nonuniformity of the contact pressure distribution on the electrical contact resistance...,2019 Influence of Clamping Force on the Performance of PEM fuel cells,2019 Contact Resistance Prediction and Structure Optimization of Bipolar Plates,2019 ECMP抛光垫混合软弹流润滑行为研究,2019 多级粗糙表面对抛光液微流动影响的数值分析,2019 Numerical Simulation of Electrocapillary Driven Flows,2019 粗糙薄层弹性体接触刚度分析,2019 Numerical studies on scavenging reaction in confined etchant layer technique (CELT),2019 A mixed elastohydrodynamic lubrication model with layered elastic theory for simulation of chemic...,2019 Analysis of laminar flow over a non-conventional random rough surface based on lattice Boltzmann ...,2019 The Novel Mechanical Property of Tongue of a Woodpecker,2019 Nonlinear boundary slip of fluid flowing over solid surface,2019

推荐链接
down
wechat
bug