近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
张军.Development of piezoelectric three-dimensional dynamometer for φ300mm wafer grinder[A],The 5th International Conference on Manufacturing Science and Engineering,2014,945:2017-2020
任宗金.一种压电式大扭矩测力仪设计与实验研究[J],压电与声光,2017,39(6):817-820
任宗金.一种毫牛级微小力产生方法及装置研究[A],中国航天第三专业信息网第三十八届技术交流会暨第二届空天动力联合会议,2017,7
任宗金.三向力作用下石英晶块应力分布及力传感研究[J],压电与声光,2019,41(5):661-665
李盼.全动舵面载荷测量的压电天平设计与误差分析[J],哈尔滨工业大学学报,2018,50(1):181-185
贾振元.六维力压电天平研制与静态性能测试研究[J],大连理工大学学报,2014,1:43-48
张军.羽流力/力矩测量系统在线标定研究[J],传感器技术,2017,1:13-15,19
任宗金.舱门冲击力测量数学模型与惯性载荷补偿方法研究[J],传感器技术,2012,2:11-14
戴恒震.传感器十字布置型测力仪研制[J],传感器与微系统,2021,40(10):75-78
张军.用于脆硬材料加工中压电测力仪研制[J],传感器与微系统,2021,39(7):69-71
张军.基于压电测力仪的模拟加载标定方法研究[J],压电与声光,2021,42(3):369-373
张军.Research on effect of seed crystal on piezoelectric effect characteristics in quartz wafer[J],Australian Journal of Mechanical Engineering,2021
张军.High-accuracy calibration method based on piezoelectric dynamometer for large vector force[J],AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING,2021
张军.压电测力仪的联立标定方法研究[J],传感器与微系统,2021,38(6):39-41,45
Qin, Ji-Yun.An efficient 5-axis toolpath optimization algorithm for machining parts with abrupt curvature[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE,2021,231(9):1609-1621
卢晓红,刘海波,刘阔,任宗金,江一波.新工科机电课程项目引导式改革必要性及改革方向[J],教育教学论坛,2019,46:96-98
Zhang, J.,Tian, Y.,Ren, Z. J.,Han, Y.,Jia, Z. Y..Rotation Calibration Method for Thrust Based on Force Error Analysis[J],EXPERIMENTAL TECHNIQUES,2020,44(1):85-98
张军,徐宏,任宗金.压电式推力测量装置模态参数辨识研究[J],传感器与微系统,2019,38(4):48-50
任宗金,何小龙,张军,范宏伟.一种压电式大扭矩测力仪设计与实验研究[J],压电与声光,2017,39(6):817-820
任宗金,张军,孙晶,崔岩,马建伟,陈星,温锋.面向工程专业认证的大学生实践能力评价方法研究[J],山东农业工程学院学报,2017,34(12):11-12
Tian, Yu,Zhang, Jun,Ren, Zong-jin,Liu, Wei,Jia, Zhenyuan,Qi, Yazhou.A novel piezoelectric dynamometer based on double-sensor for thermal compensation[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE,2017,231(23):4479-4491
孙晶,张伟,任宗金,王殿龙,崔岩.工程教育专业认证毕业要求达成度的成果导向评价[J],清华大学教育研究,2017,38(4):117-124
张军,徐成帅,任宗金,齐亚州.羽流力/力矩测量系统在线标定研究[J],传感器与微系统,2017,36(1):13-15,19
卢晓红,王殿龙,陈星,任宗金.机械专业"自动控制系统"教学体系改革研究[J],教育教学论坛,2016,3:84-85
Lu, Xiaohong,Jia, Zhenyuan,Wang, Xinxin,Li, Guangjun,Ren, Zongjin.Three-dimensional dynamic cutting forces prediction model during micro-milling nickel-based sup...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2015,81(9-12):2067-2086
Jia, Zhenyuan,Zhao, Liqi,Ren, Zongjin,Wang, Fei,Li, Dong,Ji, Weilei.Investigation into Influence of Feed Speed on Surface Roughness in Wire Sawing[J],MATERIALS AND MANUFACTURING PROCESSES,2015,30(7):875-881
卢晓红,王文韬,司立坤,韩鹏卓,任宗金.基于双PSD的机械手运动轨迹跟踪测量装置[J],制造技术与机床,2015,6:61-66
Jia Z.,Gao Y.,Ren Z.,Liu W.,Shang Y.,Gao S..Research on the characteristics of a piezoelectric balance for the dynamic motion device[J],International Journal of Industrial and Systems Engineering,2014,18(3):364-381
刘巍,任宗金,马建伟,王殿龙.《机械工程测试技术》研究型教学模式改革探讨[J],科技创新导报,2014,11(9):95-96
贾振元,高翼飞,任宗金,刘巍.六维力压电天平研制与静态性能测试研究[J],大连理工大学学报,2014,54(1):43-48
贾振元,卢晓红,任宗金.Design and dynamic deformation analysis for elastic cutter fixture of tool grasper mechanism on d...[A],2014,494(495):341-344
卢晓红,贾振元,任宗金,司立坤.Reliability Oriented Performance Testing System of Chain-type Magazine and ATC[J],Sensors & Transducers,2014,177(8):113-121
任宗金,张军,贾振元.Design and Calibration of a Cutting Force Dynamometer[A],2014,945:2191-2194
张军,钱敏,康仁科,任宗金.Development of piezoelectric three-dimensional dynamometer for φ300mm wafer grinder[A],2014,945:2017-2020
Li, Dong,Ren, Zongjin,Jia, Zhenyuan,Zhao, Liqi,Wang, Fei.Stress analysis and simulation on piezoelectric quartz wafer under multidimensional forces[J],Materials Physics and Mechanics,2014,21(1):17-28
Jia, Z.Y.,Zou, J.,Lu, X.H.,Ren, Z.J..Design and dynamic deformation analysis for elastic cutter fixture of tool grasper mechanism on d...[J],Applied Mechanics and Materials,2013,494-495:341-344
Gao, Yifei,Ren, Zongjin,Jia, Zhenyuan,Liu, Wei.A study on the dynamic six-component force measurement with wind loads[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE,2013,227(11):2456-2466
Gao S.,Ren Z.,Zhang J.,Shang Y.,Gao Y..Research on dynamic calibration of piezo-two-dimensional force sensor[J],Sensors and Transducers,2013,155(8):34-38
Jia, Zhenyuan,Gao, Yifei,Ren, Zongjin,Gao, Shengnan,Shang, Yongyan.Design and calibration method for a novel six-component piezoelectric balance[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE,2013,227(8):1841-1852
Ren Z.,Gao S.,Jia Z.,Shang Y.,Gao Y..Piezoelectric sensor of control surface hinge moment[J],Sensors and Transducers,2013,152(5):11-17
Ren Z.,Jia Z.,Zhang J.,Gao S.,Shang Y..Study on a method of dynamic response function for the piezoelectric measurement system[J],Sensors and Transducers,2013,153(6):111-117
Ren Z.,Jia Z.,Zhang J.,Shang Y.,Gao S..Research on the dynamic error and acceleration compensation for the piezoelectric sensor[J],Sensors and Transducers,2013,153(6):118-123
Jia Z.,Shang Y.,Ren Z.,Gao Y.,Gao S..Research on the structure and signal transmission of rotary piezoelectric dynamometer[J],Sensors and Transducers,2013,152(5):1-10
任宗金,贾振元,王浩然,高翼飞,陈皞.基于压电式传感器的力矢量测量模型研究[J],压电与声光,2012,34(3):380-383
任宗金,贾振元,高翼飞,王浩然,陈皞.舱门冲击力测量数学模型与惯性载荷补偿方法研究[J],传感器与微系统,2012,31(2):11-14
任宗金,孙宝元,张军,钱敏.轨/姿控火箭发动机推力矢量动态测试系统测量原理与动态性能[J],航空学报,2009,30(11):2037-2044
京公网安备 11010802027423号