近期论文
查看导师新发文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
霍军周.Anti-vibration design for TBM main drive system based on multi-directional coupling dynamic cha...[J],JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY,2021,34(11):4405-4421
Huo, Junzhou,Li, Jianbin,Dong, Jianghui,Wang, Liping,Xu, Zhaohui,Meng, Zhichao.Coupled modeling and dynamic characteristics of TBM cutterhead system under uncertain factors[J],MECHANICAL SYSTEMS AND SIGNAL PROCESSING,2020,140
Wu, Hanyang,Zhang, Zhange,Huo, Junzhou,Meng, Zhichao,Xue, Lin,Xie, Liyang.Load characteristics study with a multi-coupling dynamic model for TBM supporting system based ...[J],TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY,2019,91
叶尔肯,聂晓东,胡爱莲,霍军周,周林伟.机车车辆耦合动力学特性及实验研究[J],中国工程机械学报,2019,17(1):34-38
张伟,霍军周,宋学官,石茂林.基于代理模型的机械式挖掘机动臂轻量化设计[J],机械设计与制造,2019,4:1-4
叶尔肯,聂晓东,贾国朋,陈立和,苗斌,霍军周.基于数值分析的TBM动态载荷拟合[J],组合机床与自动化加工技术,2018,12:47-50
聂晓东,张恒,霍军周,郭金池.一种等强度微锥结构螺栓设计及有限元分析[J],机械设计,2018,11:74-78
Huo, Junzhou,Zhu, Dong,Sun, Wei,Wang, Liping,Dong, Jianghui,Wu, Hanyang.The rigid-flexible coupling dynamic mode and response analysis of bearing-wheel-rail system und...[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE,2018,232(21):3859-3880
霍军周.模糊偏好的TBM刀盘溜碴结构设计[J],中国工程机械学报,2018,16(5):421-426
聂晓东,胡军,李旋旋,霍军周,欧阳湘宇.基于改进准静态法的刀盘动应力分析及实测验证[J],机械工程与自动化,2018,3:5-7
Nie, Xiaodong,Hu, Ailian,Huo, Junzhou,Guo, Jinchi.Load Distribution Analysis and Experimental Verification of TBM Thread Connection Structure[A],2018,78:367-375
王亚彪,孙振生,张旭,李铎,霍军周,孙伟.风电圆锥滚子轴承大挡边-滚子球端面接触分析方法[J],太阳能学报,2018,39(1):258-263
霍军周,吴瀚洋,朱冬,孙伟,鲍有能.TBM机电耦合建模与同步控制策略对比分析[J],机械工程学报,2018,54(1):120-126
Huo, Junzhou,Wu, Hanyang,Dong, Jianghui,Sun, Wei,Zhang, Zhange,Wang, Liping.Electromechanical coupling dynamics of TBM main drive system[J],NONLINEAR DYNAMICS,2017,90(4):2687-2710
邓立营,赵明,卜睿,王伟政,霍军周.不同加载下的TBM刀盘瞬态动力学分析[J],机械工程与自动化,2017,6:69-71
赵明,邓立营,卜睿,王伟政,霍军周.复杂工况下的TBM刀盘力学特性仿真分析[J],机械工程与自动化,2017,6:74-75,78
Yuan, Yongliang,Du, Li,Sun, Wei,Song, Xueguan,Huo, Junzhou.Modeling and Simulation of Hoist Rope for Excavator Based on Virtual Prototype[A],2017,55:873-887
Huo, Junzhou,Zhu, Dong,Wang, Weizheng,Sun, Wei,Wang, Liping,Dong, Jianghui.Theoretical crack growth prediction model for thick plate butt welding joints based on stress/s...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2017,93(1-4):1183-1198
Huo, Junzhou,Wang, Weizheng,Sun, Wei,Ling, Jingxiu,Dong, Jianghui.The multi-stage rock fragmentation load prediction model of tunnel boring machine cutter group ...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2017,90(1-4):277-289
凌静秀,孙伟,霍军周,邓立营.TBM刀盘系统多自由度耦合振动响应灵敏度研究[J],中南大学学报(自然科学版),2017,48(3):650-657
霍军周,周林伟,朱冬,张伟,王伟政,孙伟.复合式土压平衡盾构机刀盘开口模式设计[J],哈尔滨工程大学学报,2017,38(3):433-439
Li, Tao,Wu, Hanyang,Zhu, Dong,Meng, Zhichao,Huang, Xiaoqi,Huo, Junzhou.Dynamic characteristics and experimental research of locomotive wheelset[A],2017,167-170
孙伟,宋学官,霍军周.Modeling and Simulation of Hoist Rope for Excavator Based on Virtual Prototype[A],2017,873-887
孙伟,朱烨,霍军周,黄晓琦.基于裂纹失效区域划分的TBM刀盘裂纹位置预估及分析[J],机械工程学报,2017,54(1):27-35
徐兆辉,张占葛,李多,霍军周.Factor analysis of bearing temperature distribution based on thermal network model[J],International Journal of Smart Engineering,2017
张占葛,朱冬,李多,霍军周.Friction Properties of Axlebox Bearing Based on Quasi-static Theory and Elastohydrodynamic Lubric...[J],International Journal of Smart Engineering,2017
吴瀚洋,朱冬,霍军周.The Main Driving System Vibration Analysis Under Different Rotating Speed Of TBM Cutterhead[A],2017
Zhu, Zhudong,Chen, Kui,Huang, Xiao-Qi,Hou, Nan,Wang, Wei-Zheng,Huo, Jun-Zhou.Finite Element Analysis of a New Welding Structure of Cutter Mount in TBM[A],2017,105:908-915
Huo, Junzhou,Zhu, Dong,Hou, Nan,Sun, Wei,Dong, Jianghui.Application of a small-timescale fatigue, crack-growth model to the plane stress/strain transit...[J],ENGINEERING FAILURE ANALYSIS,2017,71:11-30
Huo, Junzhou,Hou, Nan,Sun, Wei,Wang, Liping,Dong, Jianghui.Analyses of dynamic characteristics and structure optimization of tunnel boring machine cutter ...[J],NONLINEAR DYNAMICS,2017,87(1):237-254
Zhang, Chunguang,Qu, Fuzheng,Guo, Li,Huo, Junzhou,Xie, Zhengyi.Influence of cutterhead system structure on load distribution and life of main bearing[J],JOURNAL OF VIBROENGINEERING,2016,18(7):4164-4177
欧阳湘宇,孙伟,霍军周.多点分布载荷作用下TBM刀盘裂纹萌生寿命预测[J],机械科学与技术,2016,35(10):1484-1488
Wu, Hanyang,Huo, Junzhou,Zhang, Wei,Zhu, Dong,Hou, Nan.An electromechanical coupling model of TBM's main driving system[A],2016
孙伟,朱晔,凌静秀,霍军周.基于裂纹失效区域的分体式刀盘可靠性计算[J],东北大学学报(自然科学版),2016,37(8):1144-1148
霍军周,李广庆,吴瀚洋,孙伟,孙晓龙.TBM刀盘缩尺试验台设计及其静动态特性分析[J],哈尔滨工程大学学报,2016,37(5):713-717,723
凌静秀,孙伟,霍军周,李广庆.TBM 刀盘系统动态特性及参数影响[J],哈尔滨工程大学学报,2016,37(4):598-602
霍军周,孙伟.Application of a small-timescale fatigue, crack-growth model to the plane stress/strain transitio...[J],Engineering Failure Analysis,2016,71(1):11-30
霍军周,李广庆,吴瀚洋,孙伟,孙晓龙.基于相似理论的TBM刀盘缩尺试验台设计及其静动态特性对比分析[J],哈尔滨工程大学学报,2016,37(5):713-717
Wang W.Z.,Zhou J.J.,Zhu D.,Wu H.Y.,Wang Y.J.,Huo J.Z..Dynamics analysis of flexible shaft wheel-rail SYSTWM[A],2016,355-359
霍军周,吴瀚洋,赵奎山,李涛.基于滚刀系统耦合动力学的轴承修形设计[J],东北大学学报(自然科学版),2015,36(12):1776-1779
霍军周,李涛,李广庆,孙晓龙.滑动支撑的新型滚刀设计及其动态性能[J],哈尔滨工程大学学报,2015,36(11):1509-1514
Huo Jun-zhou,Sun Xiao-long,Li Guang-qing,Li Tao,Sun Wei.Multi-degree-of-freedom coupling dynamic characteristic of TBM disc cutter under shock excitati...[J],JOURNAL OF CENTRAL SOUTH UNIVERSITY,2015,22(9):3326-3337
Ding, Xin,Sun, Wei,Wang, Lintao,Huo, Junzhou,Sun, Qingchao,Song, Xueguan.Sensitivity Analysis of Major Equipment Based on Radial Basis Function Metamodel[A],2015,9246:469-480
Wu, Hanyang,Huo, Junzhou,Song, Xueguan,Wang, Lintao,Sun, Wei.The Vibration Analysis of TBM Tunnelling Parameters Based on Dynamic Model[A],2015,9246:489-500
Huo, Junzhou,Wu, Hanyang,Chen, Jing,Ling, Jingxiu,Li, Guangqing.Comparative analysis of Newmark and Rungekutta method for solving a TBM cutterhead multi-DOF dyna...[J],International Journal of Hybrid Information Technology,2015,8(7):363-374
霍军周,蔡宝,欧阳湘宇,王亚杰.重载冲击激励下TBM主机系统动力学建模与振动特性分析[J],机械科学与技术,2015,34(9):1322-1327
孙伟,郭莉,周建军,霍军周.TBM双滚刀破岩过程模拟及刀圈结构设计[J],煤炭学报,2015,40(6):1297-1302
霍军周,陈巍,欧阳湘宇,张旭.基于岩碴流动性的TBM出碴槽口选优设计[J],东北大学学报(自然科学版),2015,36(5):715-718
陈巍,孙伟,霍军周.TBM刀盘开口面积的确定[J],机械设计与制造,2015,5:29-31,35
霍军周,王亚杰,欧阳湘宇,蔡宝.基于BP神经网络的TBM主轴承载荷谱预测[J],哈尔滨工程大学学报,2015,36(7):965-969
凌静秀,孙伟,霍军周,邓立营.TBM刀盘系统多自由度耦合固有特性及敏感度[J],东北大学学报(自然科学版),2015,36(4):546-550
霍军周,欧阳湘宇,王亚杰,蔡宝.重载冲击激励下 TBM 刀盘振动特性的影响因素分析[J],哈尔滨工程大学学报,2015,36(4):555-559
Huo, Junzhou,Wu, Hanyang,Sun, Wei,Chen, Jing,Wang, Liping.Improved design of the transmission mechanism of the of 4-cylinder double-acting Stirling engin...[J],JOURNAL OF VIBROENGINEERING,2015,17(2):643-654
霍军周,孙伟.Improved design of the transmission mechanism of the 4-cylinder double-acting Stirling engine[J],Journal of Vibroengineering,2015,17(2)
霍军周,陈巍,欧阳湘宇,张旭.基于岩碴流动性的TBM出碴槽结构设计[J],东北大学学报,2015,36(5):715-718
Huo, Junzhou,Wu, Hanyang,Li, Guangqing,Sun, Wei,Chen, Jing.The Coupling Dynamic Analysis and Field Test of TBM Main System under Multipoint Impact Excitat...[J],SHOCK AND VIBRATION,2015,2015
Wang, Wei-Zheng,Zhou, Jian-Jun,Zhu, Dong,Wu, Han-Yang,Wang, Ya-Jie,Huo, Jun-Zhou.DYNAMICS ANALYSIS OF FLEXIBLE SHAFT WHEEL-RAIL SYSTWM[A],2015,355-359
Huo, Junzhou,Wu, Hanyang,Chen, Jing,Ling, Jingxiu,Sun, Xiaolong.The dynamic comparative analysis between two TBM main system structures[J],International Journal of u- and e- Service, Science and Technology,2015,8(11):283-294
霍军周,陈静,张旭.A cooperative co-evolutionary method with consistency coordination mechanisms and its application...[J],Journal of software engineering,2015,9(1):77-86
蔡宝,李震,王亚杰,霍军周.TBM刀盘自动装配系统开发[J],机械设计与制造,2014,12:179-182,186
李守巨,霍军周,曹丽娟.盾构机土压平衡系统的ARMA模型及其参数估计[J],煤炭学报,2014,39(11):2201-2205
霍军周,杨静,孙伟,凌静秀.不同TBM支撑结构形式下的围岩稳定性分析[J],东北大学学报(自然科学版),2014,35(11):1602-1606
霍军周,蔡宝,王亚杰,欧阳湘宇.盾构机刀盘的力学分析与优化设计[J],机械设计与制造,2014,10:57-60
霍军周,杨静,孙伟,李庆宇.不同模式下 TBM 刀群三维回转切削仿真与优化设计[J],哈尔滨工程大学学报,2014,35(11):1403-1408
霍军周,杨静,孙伟,张旭.TBM刀盘支撑筋结构设计及静动态特性分析[J],哈尔滨工程大学学报,2014,35(7):883-888
霍军周,李涛,张旭,杨静,路林.四缸双作用斯特林发动机平衡改进设计[J],哈尔滨工程大学学报,2014,35(8):987-992
霍军周,孙伟,欧阳湘宇,虞诗强,张旭.隧道掘进机刀群与盘体支撑筋耦合布置设计[J],机械工程学报,2014,50(21):23-30
霍军周,张旭,邓立营.交互式优化设计方法综述[J],机械工程与自动化,2014,3:215-217
Huo Junzhou,Ouyang Xiangyu,Zhang Xu,Chen Jing.The Influence of Front Support on Vibration Behaviors of TBM Cutterhead under Impact Heavy Load...[A],2014,541-542:641-+
霍军周,李涛,虞诗强,杨静.重型板式给料机驱动链轮结构参数优化设计[J],机械设计与制造,2014,2:4-7
霍军周,张旭,欧阳湘宇,蔡宝.盘形滚刀垂向-轴向动力学模型及振动特性分析[J],机械设计与研究,2014,30(5):114
Huo J.,Wu H.,Chen J..Dynamics simulation of stirling engine for solar energy based on the time-varying support stiffne...[J],Open Mechanical Engineering Journal,2014,8(1):710-715
霍军周.Multiobjective Human-Computer Cooperative Co-evolutionary Method Based on Non-dominated Sorting S...[J],Open Electrical & Electronic Engineering Journal,2014,8(8):213-217
霍军周.Numerical simulation of the multi-disc-cutters crushing rock process based on different cutting w...[J],Energy Education Science and Technology Part A: Energy Science and Research,2014,32(6):6249-6436
霍军周.Simulation of TBM mucking process based on the ballast fluidity[A],2014,541:832-835
霍军周,孙伟.不同模式下TBM刀群三维回转切削仿真与优化设计[J],哈尔滨工程大学,2014,35(11):1602-1606
Huo J.,Zhang X.,Chen J..Numerical simulation of the multi-disc-cutters crushing in different cutting ways[J],Energy Education Science and Technology Part A: Energy Science and Research,2014,32(6):6429-6436
虞诗强,霍军周,吴承原,孙伟.EPB盾构机刀盘开口模式与刀盘盘体结构耦合设计[J],机械设计与制造,2013,10:242-245
Zhang X.,Sun W.,Huo J.,Ling J..RETRACTED ARTICLE: Interval physical programming and its application to evaluation of soil state ...[A],2013,85-89
孙伟,凌静秀,霍军周,邓立营,巫思荣,党军锋.TBM水平支撑不同接触面积下的围岩稳定性分析[J],哈尔滨工程大学学报,2013,34(7):899-906