近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1]Yang, Rui,Zhang, Shaoxing,Tang, Chang,Niu, Bin.Efficient tolerance design of topology-optimized functional structures[J],Computer-Aided Design and Applications,2020,17(3):475-486
[2]杨晴,杨睿,牛斌.一种面向热膨胀性能的公差设计方法[J],现代机械,2019,4:11-15
[3]He, Changbo,Niu, Pei,Yang, Rui,Wang, Chaoge,Li, Zhixiong,Li, Hongkun.Incipient rolling element bearing weak fault feature extraction based on adaptive second-order stochastic resonance incorporated by mode decomposition[J],MEASUREMENT,2019,145:687-701
[4]Li, Hongkun,Wang, Chaoge,Hou, Mengfan,Yang, Rui,Tang, Daolong.Weak fault feature extraction of gear based on KVMD and singular value difference spectrum[A],2018,211
[5]郭锋,孙士勇,杨睿,李盼.表面形貌对GFRP/铝合金粘接剪切强度的影响研究[J],玻璃钢/复合材料,2018,10:51-55
[6]Niu, Bin,He, Xiaomeng,Shan, Yao,Yang, Rui.On objective functions of minimizing the vibration response of continuum structures subjected to external harmonic excitation[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2018,57(6):2291-2307
[7]马建伟,司立坤,孙士勇,郭晓光,杨睿.“机械精度设计与检测技术”教学改革与实践[J],实验室科学,2018,21(2):122-124,127
[8]李盼,杨睿,任宗金,钱卫.全动舵面载荷测量的压电天平设计与误差分析[J],哈尔滨工业大学学报,2018,50(1):181-185
[9]李春晖,孙士勇,牛斌,杨睿.MFC驱动的可变形机翼缩比模型主动变形研究[J],压电与声光,2018,40(1):104-107
[10]韩剑,孙士勇,邢灵冰,杨睿.CFRP表面纳米晶镀层的制备[J],宇航材料工艺,2017,47(6):55-58
[11]詹东,杨睿,孙士勇.RTM成型工艺中纤维体积密度不均匀性对树脂流动的影响[J],玻璃钢/复合材料,2017,10:62-67
[12]邢灵冰,孙士勇,杨睿,孙国钟,秦进,刘锦华.玻璃纤维/环氧树脂复合材料表面金属化工艺研究[J],玻璃钢/复合材料,2017,9:67-72
[13]Wang, Fuji,Wang, Xiaonan,Yang, Rui,Gao, Hanqing,Su, Youliang,Bi, Guangjian.Research on the carbon fibre-reinforced plastic (CFRP) cutting mechanism using macroscopic and microscopic numerical simulations[J],JOURNAL OF REINFORCED PLASTICS AND COMPOSITES,2017,36(8):555-562
[14]郭东明,贾振元,杨睿,钱卫.大型风洞气动弹性试验模型/支撑制造、感知与控制的科学问题[J],中国科学基金,2017,31(5):428-431
[15]牛斌,孙士勇,杨睿.Microscopic analytical and numerical investigation of orthogonal cutting CFRP[A],2017
[16]Niu, Bin,Su, Youliang,Yang, Rui,Jia, Zhenyuan.Micro-macro-mechanical model and material removal mechanism of machining carbon fiber reinforced polymer[J],INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE,2016,111:43-54
[17]Yan Z.,Qian W.,Yang R.,Sheng X..The manufacture and application for composites aeroelastic model of civil airliner wing in FL-26 transonic wind-tunnel[A],30th Congress of the International Council of the Aeronautical Sciences, ICAS 2016,2016
[18]Wang, D.,Dorey, R. A.,Li, X.,Shi, P.,Zhao, X.,Liang, J.,Ren, T.,Dong, W.,Yang, R.,Wang, Y..Electrohydrodynamic atomization deposition and mechanical polishing of PZT thick films[J],CERAMICS INTERNATIONAL,2016,42(11):12623-12629
[19]Sun, Shiyong,Yang, Rui,Han, Jian,Guo, Huafeng,Xing, Lingbing.Effect of nickel particles on the interfacial adhesive strength between a Ni-P composite coating and a polymeric composite substrate[J],SURFACE & COATINGS TECHNOLOGY,2016,297:19-26
[20]Niu, Bin,Su, Youliang,Wang, Fuji,Yang, Rui,Sun, Shiyong.Characterization of dynamic forces in orthogonal cutting of CFRP[A],17th European Conference on Composite Materials, ECCM 2016,2016
[21]牛斌,杨睿.On objective functions in topology optimization for vibration and wave propagation problems[A],2016
[22]牛斌,王福吉,杨睿,孙士勇.Characterization of dynamic forces in orthogonal cutting of CFRPs[A],2016,110
[23]Sheng, Xianjun,Kong, Yuanli,Zhang, Fengyun,Yang, Rui.Identification for Active Vibration Control of Flexible Structure Based on Prony Algorithm[J],SHOCK AND VIBRATION,2016,2016
[24]孙士勇,杨睿,郭华锋,韩剑.玻璃纤维/环氧树脂复合材料与镀层界面的Ni颗粒强化工艺[J],复合材料学报,2015,33(7):1408-1415
[25]孙士勇,闫子彬,赵延广,杨睿,贾振元.基于短纤维增韧的复合材料制孔毛刺和分层抑制研究[J],机械工程学报,2015,51(21):206-212
[26]闫子彬,杨睿,孙士勇,钱卫,郭东明.高性能风洞颤振模型的性能精确制造研究[J],机械工程学报,2015,52(9):72-78
[27]林家冠,杨睿,王廷霞,詹东.大型复合材料构件热压罐成型温度分析与均匀性改善研究[J],玻璃钢/复合材料,2015,5:61-65
[28]孙士勇,杨睿,张少辉,王晓宇,史文华.叉指形电极压电执行器的热弹性比拟分析方法[J],压电与声光,2015,37(1):32-34
[29]牛斌,杨睿.Micro-mechanical model and material removal mechanism of machining carbon fiber reinforced polymer composite[A],The 20th International Conference on Composite Materials,2015
[30]Sun, Shiyong,Yang, Rui,Yan, Zibin,Qian, Wei.Effect of Interfacial Debonding on the Strength of Composite Structure-Similarity Scale Model for the Wing-Box[J],INTERNATIONAL JOURNAL OF AEROSPACE ENGINEERING,2015,2015
[31]杨睿,孙士勇,钱卫,郭东明.A Precise Manufacturing Method of the Composite Structure-Similar Flutter Model[J],Advances in Mechanical Engineering,2014,2014:1-10
[32]Sun, Shiyong,Yang, Rui,Jia, Zhenyuan.Finite Element Analyses of Face/Core Interfacial Fracture Toughness of Composite Sandwich with Reinforced Chopped Fibers[J],ADVANCES IN MECHANICAL ENGINEERING,2014
[33]杨睿,张强,孙士勇,赵博文,郭东明.机翼结构相似颤振模型制造的模态频率误差修正方法[J],机械工程学报,2013,49(8):57-64
[34]杨睿.A distribution medium considered resin flow simulation model for vacuum infusion molding process[A],Advanced Materials Research,2013,753:221-224
[35]米大海,杨睿,周亮,刘玚,郭东明.以频率为目标的加筋平板结构优化设计研究[J],机械强度,2013,35(2):179-182
[36]Sun, Shi-yong,Yan, Zi-bin,Yang, Rui.Numerical Study on the Delamination Onset in Drilling Composite Materials[A],3rd International Conference on Manufacturing Science and Engineering(ICMSE 2012),2012,472-475:2256-2259
[37]Mi, Dahai,Yang, Rui,Zhou, Liang,Liu, Yang,Guo, Dongming.Optimal structural frequency design of stiffened shell[A],International Conference on Mechatronics and Applied Mechanics (ICMAM2011),2011,157-158:1636-1639
[38]Mi, Dahai,Yang, Rui,Zhou, Liang,Liu, Yang,Guo, Dongming.Frequency-aimed structural optimal design of stiffened plate[A],International Conference on Management, Manufacturing and MaterialsEngineering (ICMMM 2011),2011,452-453:1475-1480
[39]Ren, Li,Yang, Rui,Zhang, Wenxiao.Research on Topology Optimization Method for Continuum Structure under Geometric Constraints[A],International Conference on Advanced Engineering Materials andTechnology (AEMT2011),2011,291-294:1589-+
[40]Ren L.,Yang R.,Zhang W..Topology optimization design for two-material micro compliant mechanism with stress constraint[A],2011 2nd International Conference on Mechanic Automation and Control Engineering, MACE 2011,2011,1843-1846
[41]杨睿,刘玚,钱卫,杨绪印.面向机身颤振模型结构设计的拓扑优化方法[J],机械工程学报,2011,47(11):59-63
[42]脱朝智,钱卫,杨睿.主动压电纤维的驱动仿真与试验研究[A],第十二届全国空气弹性学术交流会,2011,581-586
[43]Yang, Rui,Liu, Yang,Zhou, Liang.A Topology Optimization Method in Fuselage Flutter Model Design[A],2nd International Conference on Manufacturing Science and Engineering,2011,199-200:1297-1302
[44]Yang, Rui,Liu, Xiaoshun,Ren, Haoyi.Research on Simulation and Experiment for Piezoelectric Smart Structures[A],2nd International Conference on Manufacturing Science and Engineering,2011,201-203:2039-2044
[45]杨睿.Research on simulation and experiment for Piezoelectric smartstructures[A],2nd The International Conference on Manufacturing Science and Engineering,2011,201-203:2039-2044
[46]Dahai Mi,杨睿,Liang Zhou,Yang Liu,郭东明.Optimal structural frequency design of stiffened shell[A],Applied Mechanics and Materials,2011,157:1636-1639
[47]Mi Dahai,杨睿,Zhou Liang,Liu Yang,郭东明.Frequency-aimed structural optimal design of stiffened plate[A],Advanced Materials Research,2011,452:1478-1480
[48]Ren L.,Yang R.,Zhang W..Topology and shape optimization design in cooling system of vacuum calibrator for plastic profile extrusion[A],2010 International Conference on E-Product E-Service and E-Entertainment, ICEEE2010,2010
[49]Ren L.,Yang R.,Zhang W.X..Optimization design in cooling system of heterogeneous calibrator for plastic profile extrusion[A],2010 International Conference on Artificial Intelligence and Computational Intelligence, AICI 2010,2010,2:468-472
[50]盛贤君,王爱武,杨睿.基于LaRC-MFC致动器的振动主动控制[J],压电与声光,2010,32(4):568-570
[51]杨睿,杨绪印,张颖颖,任莉.面向飞机颤振模型设计的结构拓扑优化研究[J],中国机械工程,2010,21(5):585
[52]Yang Xuyin,Yang Rui,Wang Xianlin.Topology Optimum Design of Loading Plate in Fuselage Flutter Model[A],10th IEEE International Conference on Computer-Aided Industrial Designand Conceptual Design,2009,2229-2231
[53]Zhang, Zhenyu,Jia, Zhenyuan,Wang, Yongqing,Wang, Fuji,Yang, Rui.Microstructure and characterization of La2O3 and CeO2 doped diamond-like carbon nanofilms[J],SURFACE & COATINGS TECHNOLOGY,2008,202(24):5947-5952
[54]任莉,杨睿,郭东明.非均质材料零件几何和材料的并行设计研究[J],中国机械工程,2008,19(4):461-465
[55]Ren, Li,Guo, Dongming,Yang, Rui,Jia, Zhenyuan.Optimization design of heterogeneous mold based on genetic algorithm[A],12th International Manufacturing Conference in China,2006,532-533:825-+
[56]杨睿,贾振元,郭东明.理想材料零件材料信息表述及处理的研究[J],中国机械工程,2006,17(2):164-167
[57]杨睿,贾振元,刘碧静,郭东明,康仁科.理想材料零件RP制造中的生长方向优化研究[J],中国机械工程,2003,14(19):1701-1703
[58]郭东明,刘碧静,杨睿,贾振元,康仁科.理想材料零件数字化设计制造研究现状[J],机械科学与技术,2003,22(5):702-704
[59]杨睿,郭东明,徐道明,贾振元,王晓明.理想材料零件数字化制造中的自适应切片算法研究[J],中国机械工程,2003,14(9):770-772
[60]郭东明,贾振元,杨睿.理想材料零件数字化设计与制造中的科学问题[A],中国科学院《技术科学论坛》学术报告会,2002,29-34
[61]郭东明,杨睿,贾振元,王晓明.理想材料零件CAD/CAM中的数据格式及切片算法研究[J],计算机辅助设计与图形学学报,2002,14(5):447-449,455
[62]郭东明,杨睿,贾振元,刘碧静,徐道明.理想材料零件CAD模型研究[A],第五届海内外青年设计与制造科学会议,2002,1
[63]Guo, DM,Yang, R,Jia, ZY,Liu, BJ,Xu, DM.A framework for ideal functional material components modeling[A],5th International Conference on Frontiers of Design and Manufacturing(ICFDM 2002),2002,102-105
[64]杨睿,郭东明,王晓明,贾振元,杜尚俭.理想材料零件的CAD模型研究[J],中国机械工程,2002,13(1):5-8
[65]郭东明,杨睿,贾振元,王晓明.理想材料零件分层制造中的自适应切片算法研究[A],中国机械工程学会生产工程分会面向21世纪学术会议论文集中国机械工程学会,2001,31-34
[66]贾振元,王东兴,杨睿,邹国林,郭东明.数字化喷射成形功能梯度材料零件的方法[J],中国机械工程,2000,11(z1):100-102
京公网安备 11010802027423号