近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
凡晓波.Research on the local formability of Al-Mg-Si alloy sheet during rapid hot gas forming[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,108(5-6):1839-1848
任大鑫.Resistance ceramic-filled annular welding of DP980 high-strength steel[J],MATERIALS DESIGN,2022,183
林艳丽.Constitutive Modeling of the High-Temperature Flow Behavior of alpha-Ti Alloy Tube[J],JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2022,27(5):2475-2483
凡晓波.Deformation and strengthening analysis of Al-Mg-Si alloy sheet during hot with die[J],Journal of Manufacturing Processes,2022,57:452-461
何祝斌.A Comparative Study on Arrhenius and Johnson-Cook Constitutive Models for High-Temperature Defo...[J],Metals,2022,9(2)
何祝斌.A modified Marciniak-Kuczynski model for determining the forming limit of thin-walled tube extr...[J],INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2022,151:715-723
何祝斌.An accurate determination method for constitutive model of anisotropic tubular materials with D...[J],INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2022,181
何祝斌.A novel test method for continuous nonlinear biaxial tensile deformation of sheet metals by bul...[J],INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2022,169
凡晓波.Determination of pressurizing rate during hot gas forming with integrated heat treatment of Al-...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,110(5-6):1665-1676
Wang, Kehuan.High-efficiency forming processes for complex thin-walled titanium alloys components: state-of-th...[J],INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING,2022,2(3)
任大鑫.Friction Stir Welding of 5754 Aluminum Alloy with Cover Sheet[J],Materials,2022,12(11)
郑凯伦.Fundamentals, processes and equipment for hot medium pressure forming of light material tubular c...[J],International Journal of Lightweight Materials and Manufacture,2022,3(1):1-19
何祝斌.Hot Deformation Behavior of a 2024 Aluminum Alloy Sheet and its Modeling by Fields-Backofen Mod...[J],Metals,2022,9(2)
郑凯伦.Investigation and Modeling of the Preheating Effects on Precipitation and Hot Flow Behavior for F...[J],JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING,2022,4(3)
朱海辉.The development of a novel forming limit diagram under nonlinear loading paths in tube hydrofor...[J],INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2022,172
苑世剑.轻合金复杂薄壁构件流体压力成形技术新进展[J],上海航天,2019,36(2):31-37
林艳丽.金属板材拉深制耳形状与各向异性系数的解析关系模型[J],塑性工程学报,2021,28(06):19-25
苑世剑.非理想材料塑性本构关系的研究现状及发展方向[J],塑性工程学报,2018,25(4):1-10
林艳丽.基于双轴可控加载实验的应力应变建立薄壁管各向异性屈服准则[J],Forging & Stamping Technolog,2021,46(4):17-20,55
林艳丽.Analytical relationship model of ear profile and anisotropy coefficient of sheet metal deep drawi...[J],Suxing Gongcheng Xuebao/Journal of Plasticity Engineering,2021,28(6):19-25
张琨.Experimental verification of anisotropic constitutive models under tension-tension and tension-...[J],INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2020,178
凡晓波.Deformation and strengthening analysis of Al-Mg-Si alloy sheet during hot gas forming with synchr...[J],Journal of Manufacturing Processes,2021,57:452-461
郑凯伦.Investigation and Modeling of the Preheating Effects on Precipitation and Hot Flow Behavior for F...[J],Journal of Manufacturing and Materials Processing,2021,3(4):76-76
Zhu, Haihui,He, Zhubin,Lin, Yanli,Zheng, Kailun,Fan, Xiaobo,Yuan, Shijian.The development of a novel forming limit diagram under nonlinear loading paths in tube hydrofor...[J],INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2020,172
He, Zhubin,Zhu, Haihui,Lin, Yanli,Politis, Denis J.,Wang, Liliang,Yuan, Shijian.A novel test method for continuous nonlinear biaxial tensile deformation of sheet metals by bul...[J],INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2020,169
He, Zhubin,Wang, Zhibiao,Li, Peng.A Comparative Study on Arrhenius and Johnson-Cook Constitutive Models for High-Temperature Defo...[J],METALS,2019,9(2)
He, Zhubin,Wang, Zhibiao,Lin, Yanli,Fan, Xiaobo.Hot Deformation Behavior of a 2024 Aluminum Alloy Sheet and its Modeling by Fields-Backofen Mod...[J],METALS,2019,9(2)
He, Zhubin,Wang, Zhibiao,Lin, Yanli,Zhu, Haihui,Yuan, Shijian.A modified Marciniak-Kuczynski model for determining the forming limit of thin-walled tube extr...[J],INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2019,151:715-723
Ren, Daxin,Zeng, Fanyu,Liu, Yi,Liu, Liming,He, Zhubin.Friction Stir Welding of 5754 Aluminum Alloy with Cover Sheet[J],MATERIALS,2019,12(11)
苑世剑,何祝斌,胡卫龙.非理想材料塑性本构关系的研究现状及发展方向[J],塑性工程学报,2018,25(4):1-10
Lin, Yanli,Zhang, Kun,He, Zhubin,Fan, Xiaobo,Yan, Yongda,Yuan, Shijian.Constitutive Modeling of the High-Temperature Flow Behavior of alpha-Ti Alloy Tube[J],JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2018,27(5):2475-2483
AZ31B镁合金挤压管材内高压成形性能研究,金属学报,2007,43(5(2007)
Formability testing of AZ31B magnesium alloy tube at elevated temperature,Journal of Materials Processing Technology,2010,210(2010)
管材环状试样拉伸变形的受力和变形分析,金属学报,2007,44(4(2008)
管材自由胀形时胀形区轮廓形状的影响因素,金属学报,2010,46(6(2010)
Study on the formability and deformation behavior of AZ31B tube at elevated temperature by tube b...,Journal of Materials Engineering and Performance,2011,20:(2011)
A study on the bending of a trough-shaped profile using a roller and PUR pad,Int. J. Materials and Product Technology,2010,38(2(2010)
内高压成形理论与技术的新进展,中国有色金属学报,2011,21(1(2011)
Analytical model for tube hydro-bulging test, Part I: models for stress components and bulging zo...,International Journal of Mechanical Science,2014,87:297-306
Formability determination of AZ31B tube for IHPF process at elevated temperature,Trans. Nonferrous Met. Soc. China,2011,21:(2011)
Analytical model for tube hydro-bulging test, Part II: linear model for pole thickness and its ap...,International Journal of Mechanical Science,2014,87:307-315
A modified Marciniak-Kuczynski model for determining the forming limit of thin-walled tube extrud...[J],International Journal of Mechanical Science,2018
Deformation of revolving closed-shell with multi-curvature profile under inner pressure,Journal of Materials Processing Technology,2008,206:(2008)
京公网安备 11010802027423号