近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1]Liu, Jiyu,Zhao, Danyang,Chen, Yang,Zhang, Jichao,Wu, Libo,Yang, Zhikang,Zhang, Fan,Sun, Jing,Liu, Xin,Jin, Zhuji.Atmospheric pressure plasma jet and minimum quantity lubrication assisted micro-grinding of quenched GCr15[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2020,106(1-2):191-199
[2]赵丹阳,李佳泽,于同敏.玻纤增强聚丙烯制件凝聚态结构及老化性能研究[J],塑料科技,2019,47(11):17-23
[3]Wang, Hairui,Zhao, Danyang,Jin, Yifei,Wang, Minjie,You, Zhong,Yu, Guangrui.Study of collapsed deformation and energy absorption of polymeric origami-based tubes with viscoelasticity[J],THIN-WALLED STRUCTURES,2019,144
[4]魏云波,王敏杰,赵丹阳,李红霞.可降解聚合物血管支架体外力学性能测试实验研究[J],生物医学工程学杂志,2019,36(04):604-612
[5]Liu, Jiyu,Jin, Zhuji,Zhao, Danyang,Liu, Xin,Chen, Yang,Zheng, Huanxi,Zhang, Jichao,Liu, Ziai,Zhang, Fan,Chen, Faze,Huang, Liu,Sun, Jing.An environmentally-friendly method to fabricate extreme wettability patterns on metal substrates with good time stability[J],APPLIED SURFACE SCIENCE,2019,494:880-885
[6]孙建兴,郭纯方,赵丹阳.生物可降解血管支架四轴联动3D打印技术研究[J],机械设计与制造,2019,4:107-109,114
[7]周为,张诚,赵丹阳.细胞3D打印技术及应用[J],生物化工,2019,5(2):146-150
[8]Zhao, Danyang,Sun, Yanjun,Liu, Cong,Zhan, Haiyang,Wang, Minjie,Liu, Junshan,Liu, Yahua.Temperature-regulated directional bounce of impacting droplets on gradient grooves[J],SURFACE & COATINGS TECHNOLOGY,2018,356:132-137
[9]Wang, Hairui,Zhao, Danyang,Jin, Yifei,Wang, Minjie,You, Zhong.Unified parametric modeling of origami-based tube[J],THIN-WALLED STRUCTURES,2018,133:226-234
[10]刘亚华,孙炎俊,郭纯方,赵丹阳.高温表面液滴沸腾模式及其定向运动的研究进展[J],机械工程学报,2018,54(20):24-39
[11]Li, Hongxia,Liu, Kui,Zhao, Danyang,Wang, Minjie,Li, Qian,Hou, Jianhua.Multi-Objective Optimizations for Microinjection Molding Process Parameters of Biodegradable Polymer Stent[J],MATERIALS,2018,11(11)
[12]Guo, Chunfang,Sun, Jianxing,Sun, Yanjun,Wang, Minjie,Zhao, Danyang.Droplet impact on cross-scale cylindrical superhydrophobic surfaces[J],APPLIED PHYSICS LETTERS,2018,112(26)
[13]孙炎俊,赵丹阳.液滴撞击高温曲面动力学特性试验研究[J],表面工程与再制造,2018,18(2):28-32
[14]Guo, Chunfang,Zhao, Danyang,Sun, Yanjun,Wang, Minjie,Liu, Yahua.Droplet Impact on Anisotropic Superhydrophobic Surfaces[J],LANGMUIR,2018,34(11):3533-3540
[15]Song, Jinlong,Parkin, Ivan P.,Li, Shude,Zhao, Changlin,Lu, Yao,Zhao, Danyang,Sun, Jing,Roy, Tamal,Carmalt, Claire J.,Deng, Xu.A superhydrophilic cement-coated mesh: an acid, alkali, and organic reagent-free material for oil/water separation[J],NANOSCALE,2018,10(4):1920-1929
[16]李红霞,赵丹阳,王敏杰.Multi-Objective Optimizations for Microinjection Molding Process Parameters of Biodegradable Polymer Stent[J],Materials,2018,11(11):1-16
[17]金翼飞,赵丹阳,黄勇.Study of extrudability and standoff distance effect duringnanoclay-enabled direct printing[J],Bio-Design and Manufacturing,2018,1:123-134
[18]Jin, Guobao,Jin, Yifei,Zhao, Danyang,Dai, Guanghui,Zhang, Qingqing.Cross-section design of multi-lumen extrusion dies: study on the effects of die swell and gas flow rate of the lumen[J],MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE ANDPROCESSING SYSTEMS,2017,23(10):5093-5104
[19]Liu, Ziai,Zhao, Danyang,Wang, Xuyue,Song, Jinlong,Roy, Tamal,Li, Shude,Liu, Jiyu,Huang, Liu,Liu, Xin,Jin, Zhuji.Pouring-type gravity-driven oil-water separation without water bridge[J],MICRO & NANO LETTERS,2017,12(10):744-748
[20]赵丹阳,刘韬,李红霞,王敏杰.可降解聚合物血管支架结构优化设计[J],力学学报,2017,49(6):1409-1417
[21]Song, Jinlong,Parkin, Ivan P.,Zhao, Danyang,Han, Zhengjin,Xu, Wei,Lu, Yao,Liu, Xin,Liu, Bo,Carmalt, Claire J.,Deng, Xu.Super-robust superhydrophobic concrete[J],JOURNAL OF MATERIALS CHEMISTRY A,2017,5(28):14542-14550
[22]Tian, Huiqing,Zhao, Danyang,Wang, Minjie,Jin, Yifei.Effect of Die Lip Geometry on Polymer Extrudate Deformation in Complex Small Profile Extrusion[J],JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THEASME,2017,139(6)
[23]Zhao, Danyang,Wang, Hairui,Wang, Longxian,Wang, Minjie,Yao, Donggang.Experimental and numerical study of microchannel formation in rubber-assisted hot embossing with an open-channel mold[J],3rd International Conference of Smart Systems Engineering (SmaSys),2017,23(5,SI):1221-1227
[24]Yang, Xiaolong,Song, Jinlong,Zheng, Huanxi,Deng, Xu,Liu, Xin,Lu, Xiaohong,Sun, Jing,Zhao, Danyang.Anisotropic sliding on dual-rail hydrophilic tracks[J],LAB ON A CHIP,2017,17(6):1041-1050
[25]Huang, Liu,Song, Jinlong,Lu, Yao,Chen, Faze,Liu, Xin,Jin, Zhuji,Zhao, Danyang,Carmalt, Claire J.,Parkin, Ivan P..Superoleophobic surfaces on stainless steel substrates obtained by chemical bath deposition[J],MICRO & NANO LETTERS,2017,12(2):76-81
[26]魏兆成,赵丹阳,王敏杰.基于错位分屑原理的难加工材料插铣刀具[A],2017
[27]赵丹阳.Fabrication of Double-layered Alginate Microcapsules using Coaxial Nozzle[J],Journal of Micro- and Nano-Manufacturing by ASME,2017,5
[28]李红霞,王敏杰,赵丹阳.可降解聚合物血管支架结构与注塑成型工艺优化设计[A],2017第十四届先进成型与材料加工技术国际研讨会,2017
[29]Li, Hongxia,Liu, Yahua,Wang, Xinyu,Wei, Yunbo,Liu, Tao,Gu, Junfeng,Li, Zheng,Wang, Minjie,Zhao, Danyang,Qiao, Aike.Multi-Objective Optimizations of Biodegradable Polymer Stent Structure and Stent Microinjection Molding Process[J],POLYMERS,2017,9(1)
[30]魏兆成,王敏杰,王学文,赵丹阳.球头铣刀曲面多轴加工的刀具接触区半解析建模[J],机械工程学报,2016,53(1):198-205
[31]Wang, Hairui,Guo, Chunfang,Li, Yujie,Liu, Yahua,Wang, Minjie,You, Zhong,Zhao, Danyang.STRUCTURAL DESIGN AND FORMING METHOD OF SINGLE-CURVED SURFACE STRUCTURE BASED ON MIURA-ORIGAMI[A],ASME International Design Engineering Technical Conferences andComputers and Information in Engineering Conference (IDETC/CIE),2016,5B-2016
[32]Jiang, Kaiyu,Cai, Keqian,Wang, Minjie,Zhao, Danyang,You, Zhong.Experimental Study of Manufacture and Mechanical Behavior of Sandwich Structure with Composite Foldcores[A],ASME International Design Engineering Technical Conferences andComputers and Information in Engineering Conference,2016
[33]Zhao, Danyang,Li, Yujie,Wang, Minjie,Duan, Chunzheng,You, Zhong.FABRICATION OF POLYMER ORIGAMI-BASED V-TYPE FOLDED CORE[A],ASME International Design Engineering Technical Conferences andComputers and Information in Engineering Conference,2016
[34]Liu, Ziai,Wang, Xuyue,Gao, Mingqian,Song, Jinlong,Huang, Liu,Liu, Jiyu,Liu, Xin,Xu, Wei,Zhao, Danyang.Unpowered oil absorption by a wettability sponge based oil skimmer[J],RSC ADVANCES,2016,6(91):88001-88009
[35]Huang, Shuai,Parkin, Ivan P.,Song, Jinlong,Lu, Yao,Lv, Cunjing,Zheng, Huanxi,Liu, Xin,Jin, Zhuji,Zhao, Danyang,Carmalt, Claire J..Power-free water pump based on a superhydrophobic surface: generation of a mushroom-like jet and anti-gravity long-distance transport[J],JOURNAL OF MATERIALS CHEMISTRY A,2016,4(36):13771-13777
[36]宋金龙,刘新,金洙吉,赵丹阳.Superoleophobic surfaces on tainless steel substrates obtained by chemical bath deposition[J],Micro & Nano Letters,2016,12(2):76-81
[37]Jin, Guo-Bao,Zhao, Dan-Yang,Wang, Min-Jie,Jin, Yi-Fei,Tian, Hui-Qing,Zhang, Jian.Study on design and experiments of extrusion die for polypropylene single-lumen micro tubes[J],MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE ANDPROCESSING SYSTEMS,2015,21(11):2495-2503
[38]Tian, Huiqing,Zhao, Danyang,Wang, Minjie,Jin, Guobao,Jin, Yifei.Study on extrudate swell of polypropylene in double-lumen micro profile extrusion[J],JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2015,225:357-368
[39]Jiang K.,Cai K.,Wang M.,Zhao D.,You Z..Experimental study of manufacture and mechanical behavior of sandwich structure with composite foldcores[A],ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2015,2015,5B-2015
[40]Zhao D.,Li Y.,Wang M.,Duan C.,You Z..Fabrication of polymer origami-based V-type folded core[A],ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2015,2015,5B-2015
[41]王敏杰,赵丹阳,宋满仓,于同敏.聚合物微成型模具设计与制造技术[J],模具工业,2015,5:7-16,21
[42]魏兆成,王敏杰,赵丹阳.Calibration of Cutting Coefficients for Mechanistic Ball-end Milling Force Model[A],2015,313-318
[43]魏兆成,王敏杰,赵丹阳.Tool deflection error compensation in curved surface machining with contouring tool path[A],ASIA JOINT SYMPOSIUM: MOULD & DIE IN AUTOMOTIVE ENGINEERING,2015,94-103
[44]魏兆成,王敏杰,赵丹阳.A mapping-based analysis method for sculptured surface machining[A],The 38th International MATADOR Conference,2015
[45]赵丹阳,李涛,王敏杰,郭纯方.鲨鱼皮微结构微电铸复制工艺研究[J],模具工业,2014,11:52-55
[46]赵丹阳,郭纯方,田倩倩,杜立群,王敏杰.仿生鲨鱼皮减阻微沟槽滚压复制技术基础研究[A],第十一届先进成型与材料加工技术国际研讨会,2014,95-99
[47]徐斌,王敏杰,于同敏,赵丹阳.微通道聚合熔体粘性耗散尺度效应[J],高分子材料科学与工程,2014,30(7):105-109
[48]赵丹阳,郭纯方.高等学校模具课程教学改革的探索与实践[J],教育教学论坛,2014,29:37-37,38
[49]Zhao D.,Tian H.,Wang M.,Yao D..Device for measuring microscale viscosity in a self-aligned microgap[A],72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference, ANTEC 2014,2014,1(January):88-93
[50]Zhao, Danyang,Tian, Qianqian,Wang, Minjie,Jin, Yifei.Study on the Hydrophobic Property of Shark-Skin-Inspired Micro-Riblets[J],JOURNAL OF BIONIC ENGINEERING,2014,11(2):296-302
[51]Bian, Jinyao,Wang, Minjie,Zhao, Danyang,Xian, Qinchuan.Water discharge time from the conical surface of an underwater launched vehicle[J],OCEAN ENGINEERING,2014,78:45-51
[52]赵丹阳,顿锁,田慧卿,王敏杰,于同敏,刘永云.生物可降解聚合物血管支架膨胀性能有限元分析[J],大连理工大学学报,2014,54(1):54-59
[53]赵丹阳.Research on Roll-to-Roll Embossing of Shark-skin-inspired Drag-reduction Micro-riblets[A],The asia joint symposium 2014 on academia-industry cooperation,2014,249-262
[54]赵丹阳,王敏杰.Experimental Studies on Extrusion Process of Polyproplene Dounle-Lumen Micro Tube in Medical Applications[A],ANTEC2014,2014,1105-1110
[55]Jin, Guo-Bao,Wang, Min-Jie,Zhao, Dan-Yang,Tian, Hui-Qing,Jin, Yi-Fei.Design and experiments of extrusion die for polypropylene five-lumen micro tube[J],JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2014,214(1):50-59
[56]赵丹阳,田倩倩,王敏杰,黄志平,王涛.仿鲨鱼皮微沟槽结构疏水机理实验研究[J],大连理工大学学报,2013,53(4):503-507
[57]徐斌,王敏杰,于同敏,赵丹阳.采用紫外光刻电铸技术的微型腔注塑成型[J],高分子材料科学与工程,2013,29(6):169-172
[58]边金尧,王敏杰,李玉龙,赵丹阳.基于数值分析的潜航体壁面压力分布研究[J],船舶力学,2013,17(1):1-7
[59]徐斌,王敏杰,于同敏,赵丹阳.细胞皿微型塑件注射模设计关键技术[J],模具工业,2013,1:51-55
[60]靳国宝,王敏杰,赵丹阳,田慧卿.聚合物双腔微管挤出成型工艺试验研究[J],机械工程学报,2012,48(24):19-27
京公网安备 11010802027423号