近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1]李凯,罗怡,王晓东,孙屹博.胶层热传递对挠性摆式微加速度计温度滞环的影响[J],传感技术学报,2018,31(7):981-986
[2]王晓东,张梦迪,孙屹博,罗怡.力矩器磁场对微小加速度计非线性误差的影响[J],传感技术学报,2018,31(7):993-997
[3]Hamidnia, Mohammad,Luo, Yi,Wang, Xiaodong,Li, Congming.Experimental investigation on the thermal performance of Si micro-heat pipe with different cross-sections[J],MODERN PHYSICS LETTERS B,2017,31(30)
[4]罗怡,于子程,甲宸,王晓东.蒸汽腔平板微热管仿真及传热性能测试[J],航空制造技术,2017,14:30-36,43
[5]Li, Congming,Wang, Xiaodong,Zhou, Chuanpeng,Luo, Yi,Li, Zhixin,Li, Sidi.New encapsulation method using low-melting-point alloy for sealing micro heat pipes[J],Joint 18th International Heat Pipe Conference (IHPC) / 12thInternational Heat Pipe Symposium (IHPS),2017,31(6):2621-2626
[6]罗怡,王晓东.Improve the Performance of Micro Heat Pipe by Surface Modification[A],Applied Mechanics and Materials,2017
[7]罗怡,王晓东.The influence of heat transfer and creep effect to bias error of hysteresis for micro accelerometer[A],2017
[8]王晓东,罗怡.The Influence of Moment Magnetic Field on Nonlinear Error of Micro Accelerometer[A],2017
[9]王晓东,罗怡.LabVIEW Based Control System for Automatic Precise Indium Packaging[A],2017
[10]王晓东,罗怡.Effect of Adhesion Force on Reliable Operation of Micro Parts[A],2017
[11]李聪明,罗怡,周传鹏,王晓东.微热管红外测温系统的设计[J],光学精密工程,2016,34(10):2449-2455
[12]Luo, Yi,Yu, Beike,Wang, Xiaodong,Li, Congming.A Novel Flat Micro Heat Pipe With a Patterned Glass Cover[J],IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY,2016,6(7):1053-1057
[13]Luo Y.,Li Z.-X.,Zhou C.-P.,Wang X.-D.,You B..Thermal behavior of silicon-copper micro vapor chamber for high power LEDs[J],Optoelectronics Letters,2016,12(2):124-127
[14]张宗波,贺庆强,罗怡,王晓东,王立鼎.超声波塑料焊接临界温度场分析[J],焊接学报,2016,37(1):20-22
[15]罗怡,王晓东.Experimental investigation on the thermal performance of Si micro heat pipe with different cross-sections[A],2016
[16]罗怡,王晓东.Flat Micro Heat Pipe with Reservoir-Groove Combined Wick Structure[A],International Conference of Microfluidics, Nanofluidics and Lab-on-a-Chip,2016
[17]王晓东,罗怡.A new encapsulation method using low-melting-point alloy to seal micro heat pipe[A],2016
[18]罗怡,王晓东.Influence of Parallel and Trapezoidal Wick Structures to the Heat Transfer Capability of MHPs[A],.20th International Conference on Mechatronics Technology ICMT 2016,2016
[19]罗怡,王晓东,王大志.Graphene Modified Micro Heat Pipe for LED Modules[A],International Conference of Microfluidics, Nanofluidics and Lab-on-a-Chip,2016
[20]李聪明,罗怡,周传鹏,王晓东.微热管红外测温系统的设计与实验[J],光学精密工程,2016,24(10):2449-2455
[21]李聪明,周传鹏,罗怡,哈米迪,王晓东,由博.Experimental study on high-power LED device integrated with micro heat pipe[J],OPTOELECTRONICS LETTERS,2016,12(1):31-34
[22]Li, Congming,Luo, Yi,Zhou, Chuanpeng,Shan, Qing,Wang, Xiaodong.Charging method of micro heat pipe for high-power light-emitting diode[J],MICRO & NANO LETTERS,2015,10(10):518-522
[23]Hamidnia, Mohammad,Zou, Liangliang,Luo, Yi,Wang, Xiaodong.Investigation of Thermal Characteristics of a Silicon-Based LED Packaging Module[A],16 int conf elect packaging technology,2015,530-533
[24]Wang, Xiaodong,Zhou, Chuanpeng,Li, Congming,Li, Zhixin,Luo, Yi.Comparison of thermal characteristics of Light-emitting Diode chips and electrical heating source[A],16 int conf elect packaging technology,2015,638-641
[25]Luo, Yi,Yu, Beike,Shan, Qing,Wang, Xiaodong.A silicon-aluminum micro heat sink for light emitting diode (LED) chips[A],16 int conf elect packaging technology,2015,526-529
[26]Luo, Yi,Yu, Beike,Zhou, Chuanpeng,Wang, Xiaodong.Micro Heatpipe Integrated with LED Silicon Substrate[A],16 int conf elect packaging technology,2015,85-88
[27]Luo, Yi,Zhou, Zonglei,Wang, Xiaodong,Zhang, Qingqing,Shi, Ke.Automatic Array Jet Dispensing System Based on Visual System[A],IEEE International Conference on Information and Automation 2015,2015,2148-2152
[28]Qi, Na,Luo, Yi,Wang, Xiao-dong,Wang, Li-ding,Zhang, Zong-bo.Local thermal-assisted ultrasonic embossing for the fabrication of polymer microstructures[J],MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE ANDPROCESSING SYSTEMS,2015,21(5,SI):1101-1110
[29]Li, Congming,Luo, Yi,Zhou, Chuanpeng,Shan, Qing,Wang, Xiaodong.Using peristaltic pump to charge micro heat pipe for high-power LED[A],IEEE 10th International Conference on Nano/Micro Engineered andMolecular Systems (NEMS),2015,164-167
[30]罗怡,马玉辉,闫旭,祁娜,王晓东.能量控制模式下聚合物超声波微压印成形[J],哈尔滨工业大学学报,2015,47(3):103-106
[31]王晓东,单镇东,罗怡,李聪明.高精度多环片自动装配控制技术[J],纳米技术与精密工程,2015,13(2):141-147
[32]李聪明,罗怡,刘刚,王晓东.微平板热管导热性能测试系统[J],测试技术学报,2015,1:1-6
[33]祁娜,罗怡,王晓东,王立鼎.聚合物超声压印非成形面熔融缺陷形成机理及抑制[J],光学精密工程,2015,23(2):452-458
[34]罗怡,王晓东.Automatic flatness detection system for micro part[A],7th International Symposium on Precision Mechanical Measurement,2015
[35]王大志,梁军生,任同群,罗怡,王晓东,刘冲.Electrohydrodynamic atomization deposition of fuel cell catalyst-coated membrane with structure and material gradient variation[A],2015,645(1):1156-1162
[36]罗怡,王晓东.An autofocusing system for micro precision assembly[A],The 19th International Conference on Mechatronics Technology,2015
[37]娄志峰,罗怡,王晓东.Prediction of pressing quality for press fit assembly based on press fit curve and maximum pressing mounting force[J],International Journal of Aerospace Engineering,2015,15(823019)
[38]罗怡,王晓东,单庆.Experimental investigation of thermal conduction performance on silicon-based micro flat heat pipe[A],2015
[39]邹靓靓,罗怡,单庆,王晓东.Fabrication and thermal performance of copper pillars modified micro heat pipe[A],Key Engineering Materials,2015
[40]Zou L.-L.,Luo Y.,Liu J.-G.,Yu B.-K.,Shan Q.,Wang X.-D..Fabrication and thermal performance of copper pillars modified micro heat pipe (MHP)[J],Key Engineering Materials,2014,645:208-215
[41]Dazhi W.,Wen Z.,Zhu X.,Li Y.,Liang J.,Ren T.,Luo Y.,Wang X.,Liu C..Electrohydrodynamic atomization deposition of fuel cell catalyst-coated membrane with structure and material gradient variation[J],Key Engineering Materials,2014,645:1156-1162
[42]张宗波,吴宝贵,贺庆强,罗怡,王晓东,王立鼎.带有凸凹微结构的微流控基片热压成形特性研究[J],中国机械工程,2014,25(16):2231-2234,2239
[43]Wang, X. D.,Zhang, L. F.,Xin, M. Z.,Qu, Y. Q.,Luo, Y.,Ma, T. M.,Chen, L..The precision measurement and assembly for miniature parts based on double machine vision systems[A],9th International Symposium on Precision Engineering Measurements andInstrumentation (ISPEMI),2014,9446
[44]Wang, Xiao-Dong,Chi, Yong-Zhen,Luo, Yi,Zhang, Xi-Wen,Chen, Liang,Yang, Wei-Min.An Exchangeable Gripper Module Integrated in the Assembly System for Multi Miniature Parts[A],IEEE International Conference on Information and Automation (ICIA),2014,887-891
[45]You B.,Luo Y.,Wang X..The applicability of computing methods for analysis of press-fit assembly in elasto-plastic field[J],Journal of Information and Computational Science,2014,11(9):3157-3166
[46]罗怡,闫旭,陈莉,王晓东.聚合物微结构热辅助超声波压印成形[J],光学精密工程,2014,22(5):1220-1226
[47]罗怡,刘宇,王晓东.微装配中的精密点胶分液技术[J],电子世界,2014,7:89-90,91
[48]Wang, D. Z.,Li, Y.,Liang, J. S.,Xia, Z. X.,Wang, S. L.,Liu, C.,Sun, G. Q.,Luo, Y.,Wang, X. D..Fabrication and Performance of Different Structural Cathode Catalyst Layers by EHDA Deposition for DMFC[J],FUEL CELLS,2014,14(2):277-283
[49]Luo, Yi,Liu, Gang,Zou, Liang-liang,Yu, Bei-ke,Wang, Xiao-dong.Thermal behavior investigation of silicon-Pyrex micro heat pipe[J],AIP ADVANCES,2014,4(3)
[50]王晓东,罗怡.On chip micro stress test circuit for miniature component[A],2014
[51]王晓东,罗怡.Experimental investigation of copper-grooved micro heat pipes (MHPs)[J],Journal of Solid State Lighting,2014,1(14):1-8
[52]罗怡,王晓东.The Applicability of Computing Methods for Analysi[J],Journal of Information & Computational,2014,11(9):3157-3166
[53]罗怡,王晓东.微平板热管热性导热能测试系统研究[A],2014
[54]王晓东,罗怡.The precision measurement and assembly for miniature parts based on double machine vision systems[A],2014
[55]罗怡,王晓东.Design and fabrication of silicon-copper micro heat pipe[A],The 18th International Conference on Mechatronics Technology,2014
[56]罗怡,王晓东.Stress Forming of Fine Metal Wire Based on Ultrasonic Vibration[A],Applied Mechanics and Materials,2014
[57]罗怡,王晓东,单庆.Copper pillars modified silicon microgrooves changed the working style of micro heat pipe[A],2014
[58]罗怡,王晓东.Experimental investigation of thermal conduction performance on silicon-based micro flat heat pipe[A],2014
[59]王晓东,罗怡.High precision multi-ring automatic assembly system[A],2014
[60]辛明哲,罗怡,陈勇,王晓东.一种微小挠性零件的自动化精密装配系统[J],机电工程,2013,30(12):1462-1466
京公网安备 11010802027423号