近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1]Li, Zihui,Wang, Xuyue.Analytical model for estimating bending angle in laser bending of 304 stainless steel/Q235 carbon steel laminated plate[J],JOURNAL OF LASER APPLICATIONS,2019,31(4)
[2]Luo, Yonghao,Wang, Huanan,Li, Zihui,Wang, Xuyue,Xie, Gengqiao.Morphology investigation of sectional stripes and adhering slag based on vapor-to-melt ratio in Nd:YAG laser cutting of Al2O3 ceramics[J],JOURNAL OF LASER APPLICATIONS,2019,31(3)
[3]Liu, Ziai,Yang, Xiaolong,Pang, Guibing,Zhang, Fan,Han, Yuqi,Wang, Xuyue,Liu, Xin,Xue, Lin.Temperature-based adhesion tuning and superwettability switching on superhydrophobic aluminum surface for droplet manipulations[J],SURFACE & COATINGS TECHNOLOGY,2019,375:527-533
[4]韩旭,王续跃.双层碳纤维复合板材激光切割试验研究[J],现代机械,2019,4:50-56
[5]Wei, Haibo,Gao, Hang,Wang, Xuyue.Development of novel guar gum hydrogel based media for abrasive flow machining: Shear-thickening behavior and finishing performance[J],INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2019,157:758-772
[6]王焕捷,王续跃.金属扇形层合板激光圆弧扫描变形特征研究[J],红外与激光工程,2019,48(z1):27-34
[7]Wei, Haibo,Peng, Can,Gao, Hang,Wang, Xuanping,Wang, Xuyue.On establishment and validation of a new predictive model for material removal in abrasive flow machining[J],INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE,2019,138:66-79
[8]户亚娜,王续跃.百微米级微流道模具掩膜电解加工试验[J],机械设计与制造,2019,1:194-197,201
[9]李紫慧,王续跃.层合板激光往复扫描弯曲中翘曲变形数值模拟[J],红外与激光工程,2018,47(12):48-55
[10]Li, Zihui,Wang, Xuyue,Luo, Yonghao.Equivalent Properties of Transition Layer Based on Element Distribution in Laser Bending of 304 Stainless Steel/Q235 Carbon Steel Laminated Plate[J],MATERIALS,2018,11(11)
[11]王高烽,王续跃,王焕捷.矩形金属层合板激光圆弧扫描弯曲曲面变形分析[J],红外与激光工程,2018,48(2):138-145
[12]王高烽,王续跃.金属层合板激光圆弧扫描弯曲成形试验研究[J],现代机械,2018,5:1-6
[13]Huang, Liu,Song, Jinlong,Wang, Xuyue,Zhao, Changlin,Liu, Ziai,Liu, Jiyu.Soft elastic superhydrophobic cotton: A new material for contact time reduction in droplet bouncing[J],SURFACE & COATINGS TECHNOLOGY,2018,347:420-426
[14]Luo, Yonghao,Wang, Xuyue,Wu, Di.Quality investigation of alumina ceramic laser cutting based on vapor-to-melt ratio[J],JOURNAL OF LASER APPLICATIONS,2018,30(3)
[15]Luo, Yonghao,Wang, Xuyue,Wang, Chenglin,Hu, Yebing,Liu, Mucan.Alpha-to-gamma reverse phase transformation of molten removal in alumina ceramics laser processing[J],CERAMICS INTERNATIONAL,2018,44(9):10412-10419
[16]李紫慧,王续跃.金属复合板激光弯曲过程中翘曲变形数值模拟[J],红外与激光工程,2018,47(5):106-112
[17]Luo, Yonghao,Wang, Xuyue.Morphology investigation of removal particles during laser cutting of Al2O3 ceramics based on vapor-to-melt ratio[J],JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2018,255:340-346
[18]Luo, Yonghao,Wang, Xuyue,Hu, Yebing.Nucleation mode selection during formation and growth of molten removal particles in Al2O3 ceramics laser cutting[J],CERAMICS INTERNATIONAL,2018,44(4):4176-4182
[19]Wang, Xuyue,Luo, Yonghao.Diameter prediction of removal particles in Al2O3 ceramic laser cutting based on vapor-to-melt ratio[J],JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2018,251:109-117
[20]王高烽,王续跃,王焕捷.矩形金属层合板激光圆弧扫描弯曲曲面变形分析[J],红外与激光工程,2018,47(2)
[21]户亚娜,王续跃.微流道模具掩模电解加工多场耦合数值模拟[A],特种加工技术智能化与精密化——第17届全国特种加工学术会议,2017,1
[22]罗琨,王连吉,王续跃.大型轴承实体保持架铆接机的设计及支架分析[J],机械设计与制造,2017,10:109-112,116
[23]Liu, Ziai,Zhao, Danyang,Wang, Xuyue,Song, Jinlong,Roy, Tamal,Li, Shude,Liu, Jiyu,Huang, Liu,Liu, Xin,Jin, Zhuji.Pouring-type gravity-driven oil-water separation without water bridge[J],MICRO & NANO LETTERS,2017,12(10):744-748
[24]王禹,王连吉,王续跃.液体静压推力轴承设计与FLUENT仿真分析[J],机械设计与制造,2017,9:220-224
[25]吴迪,王续跃.基于气熔比的氧化锆陶瓷薄板激光切割质量研究[J],中国机械工程,2017,28(5):570-575
[26]于冬洋,王续跃.单层碳纤维复合材料激光多向切割的温度场模拟[J],激光与光电子学进展,2017,54(11):111409
[27]于冬洋,王续跃.激光同向切割单层碳纤维复合材料的温度场模拟[J],激光与光电子学进展,2017,54(4):041401
[28]Yu D.,Wang X..Temperature field simulation of single layer carbon fiber reinforced plastics in parallel laser cutting[J],Laser and Optoelectronics Progress,2017,54(4)
[29]王续跃.A kerf Simulation of Laser Cutting Single-layer CFRP as Scanning Parallel to Fiber Orientation[A],2017,175-181
[30]于冬洋,王续跃.单层CFRP激光同方向切割的温度场数值模拟[J],激光与光电子学进展,2016,04:1-15
[31]吴迪,王续跃.氧化锆陶瓷板激光切割熔化物颗粒形态研究[J],中国光学,2016,9(5):554-562
[32]吕愿宏,王续跃,宝图雅,李晓杰,王连吉.粉末药型罩聚能射流形成过程中温度分布及影响分析[J],工程爆破,2016,22(4):16-21
[33]Wang, Xuyue,Ma, Xupeng,Li, Zihui,Wang, Rui.A Study of Thickening Phenomenon in Laser Bending Zone of a Metal Laminated Plate[A],18th CIRP Conference on Electro Physical and Chemical Machining, ISEM 2016,2016,42:454-459
[34]董众豹,王续跃,李晓杰,王连吉.基于IPP图像处理的粉末药型罩面密度评价方法[J],机械设计与制造,2016,2:59-63
[35]宁海静,王连吉,李兴林,王续跃.轮毂轴承内圈端面平行度误差测量仪的研制[J],轴承,2016,2:53-57
[36]刘超,王续跃,孙建立,杨连文.弯管内表面铣削加工粗糙度仿真研究[J],机械设计与制造,2016,1:172-175
[37]朱晓松,王连吉,李兴林,王续跃.一种成品轴承高效清洗方式[J],轴承,2016,1:18-20
[38]Luo, Yonghao,Wang, Xuyue,Meng, Qingxuan,Xu, Wenji,Kang, Renke,Guo, Dongming.Modeling of vapor-to-melt ratio in laser cutting aluminum alloy sheet[J],MACHINING SCIENCE AND TECHNOLOGY,2016,20(1):44-61
[39]张攀,王续跃.层合板激光弯折区过渡层元素扩散及材料性能[J],中国激光,2016,43(7):0702001
[40]王续跃.层合板激光弯折区过渡元素扩散及材料性能[J],中国激光,2016,43(7):702001-702007
[41]王续跃.弯管外表面5轴数控铣削表面粗糙度仿真[J],制造技术与机床,2016,3:122-130
[42]王续跃,王连吉.粉末药型罩石油射孔弹侵彻性能的数值模拟[J],工程爆破,2016,4:1-4
[43]Wang, Xuyue,Ma, Xupeng,Li, Zihui,Wang, Rui.A Study of Thickening Phenomenon in Laser bending Zone of a Metal[A],18th CIRP Conference on Electro Physical and Chemical Machining (ISEM),2016,42:454-459
[44]Liu, Ziai,Wang, Xuyue,Gao, Mingqian,Song, Jinlong,Huang, Liu,Liu, Jiyu,Liu, Xin,Xu, Wei,Zhao, Danyang.Unpowered oil absorption by a wettability sponge based oil skimmer[J],RSC ADVANCES,2016,6(91):88001-88009
[45]赵志伟,王续跃,徐文骥.钛/钢层合板激光熔覆制备及其组织和性能[J],机械设计与制造,2015,10:117-119,123
[46]贾卫,王连吉,张宏伟,王续跃,艾麟.基于LabVIEW和PLC的风电轴承试验机测控系统设计[J],制造业自动化,2015,10:16-18,25
[47]吕愿宏,王续跃,李晓杰,王连吉.粉末药型罩石油射孔弹侵彻性能的数值模拟[J],工程爆破,2015,21(2):1-4
[48]郑晰月,王续跃.弯管外表面五轴数控铣削表面粗糙度仿真[J],制造技术与机床,2015,3:122-127,130
[49]赵振华,王续跃,高航,魏兆成.弯管内表面球头铣刀加工的铣削力预报[J],机械设计与制造,2014,11:211-215
[50]廖宇轩,王连吉,王续跃.轴承滚道旋转刷洗定位技术研究[J],轻工机械,2014,32(4):42-46
[51]Wang, X. Y.,Wang, J.,Xu, W. J.,Guo, D. M..Scanning path planning for laser bending of straight tube into curve tube[J],OPTICS AND LASER TECHNOLOGY,2014,56:43-51
[52]尤松,王续跃,王连吉.自动纸箱胶带封口装置[J],轻工机械,2014,32(1):82-86
[53]王续跃,王彦飞,江豪,徐文骥,郭东明.圆形倾斜薄壁件的激光熔覆成形[J],中国激光,2014,41(1):0103006
[54]高美娜,王续跃,徐文骥,郭东明.激光熔覆不锈钢-碳钢层合板的材料性能[J],激光与光电子学进展,2014,51(7):71603
[55]池闪闪,王续跃,徐文骥.考虑结合面的不锈钢-碳钢层合板脉冲激光弯曲数值模拟[J],中国激光,2014,41(11):1103002
[56]Wang, Xuyue,Wang, Yanfei,Jiang, Hao,Xu, Wenji,Guo, Dongming.Laser cladding forming of round thin-walled parts with slope angle[J],Zhongguo Jiguang/Chinese Journal of Lasers,2014,41(1)
[57]王续跃,徐文骥,郭东明.不锈钢碳钢层合板激光熔覆制备方法试验研究[J],激光与光电子学进展,2014,51(2):1-8
[58]王续跃,徐文骥.考虑结合面的不锈钢－碳钢层合板脉冲激光弯曲[J],中国激光,2014,41(11):1-7
[59]高美娜,王续跃,徐文骥,郭东明.不锈钢-碳钢层合板激光熔覆制备方法试验研究[J],激光与光电子学进展,2014,51(2):021403
[60]王彦飞,王续跃,徐文骥,郭东明.基于图像处理的铝合金薄板激光切割质量研究[J],中国激光,2014,41(1):0103002
[61]马绪鹏,王续跃,徐文骥,郭东明.不锈钢-碳钢层合板激光弯折区增厚现象研究[J],中国激光,2014,41(8):0803001
[62]Wang, Yanfei,Wang, Xuyue,Xu, Wenji,Guo, Dongming.Study on laser cutting quality of aluminum alloy sheet based on imagine processing[J],Zhongguo Jiguang/Chinese Journal of Lasers,2014,41(1)
[63]Xu, Weixing,Zhang, L. C.,Wang, Xuyue.Laser Bending of Silicon Sheet: Absorption Factor and Mechanisms[J],JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THEASME,2013,135(6)
[64]孙建立,王续跃,高航,杨连文.弯管内表面数控铣削加工方法研究[J],中国机械工程,2013,24(21):2872-2875,2920
[65]马绪鹏,王续跃,徐文骥,郭东明.不锈钢-碳钢层合板激光弯折区的热传导特性[J],激光与光电子学进展,2013,10:124-130
[66]Wang, X. Y.,Luo, Y. H.,Wang, J.,Xu, W. J.,Guo, D. M..Scanning path planning for laser bending of straight tube into coil-shape tube[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2013,69(1-4):909-917
[67]王续跃,刘超,孙建立,高航,杨连文.基于内置导轨的弯管内表面铣削加工装置设计[J],机械工程师,2013,8:7-10
[68]王续跃,胡辉,梁延德,徐文骥.钛合金小孔电火花加工有限元仿真研究[J],中国机械工程,2013,24(13):1738-1742,1748
[69]Pei, W.,Yu, Z.,Li, J.,Ma, C.,Xu, W.,Wang, X.,Natsu, W..Influence of abrasive particle movement in micro USM[A],17th CIRP Conference on Electro Physical and Chemical Machining (ISEM),2013,6:551-555
[70]马绪鹏,王续跃,徐文骥,郭东明.不锈钢碳钢层合板激光弯折区的热传导特性[J],激光与光电子学进展,2013,50(10):101401
[71]杨湘达,王连吉,李兴林,温春盛,王续跃.有装球缺口深沟球轴承自动装球机的研制[J],轴承,2012,12:14-16
[72]王彦飞,王续跃,康仁科,徐文骥,郭东明.基于去除熔化物形态分析的铝合金薄板激光切割试验研究[J],中国激光,2012,39(8):0803007
[73]徐文骥,王续跃.Fabrication Technology of Superhydrophobic Surfaces Based on Electrochemical Machining Method[A],2012,306-313
[74]王续跃,郭东明,康仁科,徐文骥.基于去除熔化物分析的铝合金薄板激光切割质量研究[J],中国激光,2012,39(8):1-7
[75]杨冰冰,王续跃,徐文骥,郭东明.不锈钢-碳钢层合板激光弯曲试验研究[J],激光与光电子学进展,2012,49(9):091403
[76]徐文骥,刘新,孙晶,王续跃.淬硬钢干式静电冷却切削机理及试验研究[J],机械工程学报,2011,47(23):180-185
[77]胡辉,王续跃,梁延德,徐文骥.钛合金小孔电火花快速加工试验研究[J],电加工与模具,2011,5:9-13
[78]池永涛,徐文骥,王续跃,李冉.导电加热渐进成形实验与温度场模拟[A],第14届全国特种加工学术会议,2011,5
[79]Wang, Xuyue,Kang, Renke,Xu, Wenji,Guo, Dongming,Wang, Jun.A THRESHOLD MODEL FOR LASER CLEANING OF LARGER SILICON WAFERS[J],MACHINING SCIENCE AND TECHNOLOGY,2011,15(4):415-428
[80]孟庆轩,王续跃,徐文骥,康仁科,郭东明.薄板激光切割气熔比数学建模及试验验证[J],机械工程学报,2011,47(17):172-178
京公网安备 11010802027423号