近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Fan, Kangnan,Jin, Zhuji,Bao, Yan,Wang, Qiulin,Niu, Lin,Sun, Jing,Song, Jinlong.A facile and less-polluting electrochemical method to fabricate multifunctional superhydrophobi...[J],COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS,2020,590
Guo, Xiaoguang,Yuan, Song,Gou, Yongjun,Wang, Xiaoli,Guo, Jiang,Jin, Zhuji,Kang, Renke.Study on chemical effects of H2O2 and glycine in the Copper CMP process using ReaxFF MD[J],APPLIED SURFACE SCIENCE,2020,508
Guo, Xiaoguang,Yuan, Song,Huang, Junxin,Chen, Chong,Kang, Renke,Jin, Zhuji,Guo, Dongming.Effects of pressure and slurry on removal mechanism during the chemical mechanical polishing of...[J],APPLIED SURFACE SCIENCE,2020,505
Liu, Jiyu,Zhao, Danyang,Chen, Yang,Zhang, Jichao,Wu, Libo,Yang, Zhikang,Zhang, Fan,Sun, Jing,Liu, Xin,Jin, Zhuji.Atmospheric pressure plasma jet and minimum quantity lubrication assisted micro-grinding of que...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2020,106(1-2):191-199
Guo, Xiaoguang,Chen, Chong,Kang, Renke,Jin, Zhuji.REAXFF MOLECULAR DYNAMICS SIMULATION OF MATERIAL REMOVAL MECHANISMS DURING CMP PROCESS OF SILIC...[A],2019
施远,金洙吉,姜冠楠,刘作涛,周忠正,王泽北.YG15硬质合金电化学腐蚀机理研究[J],中国腐蚀与防护学报,2019,03:253-259
Shi, Zhuoying,Jin, Zhuji,Guo, Xiaoguang,Shi, Xiaolin,Guo, Jiang.Interfacial friction properties in diamond polishing process and its molecular dynamic analysis[J],DIAMOND AND RELATED MATERIALS,2019,100
Guo, Xiaoguang,Huang, Junxin,Yuan, Song,Chen, Chong,Jin, Zhuji,Kang, Renke,Guo, Dongming.Effect of surface hydroxylation on ultra-precision machining of quartz glass[J],APPLIED SURFACE SCIENCE,2020,501
Zhang, Shuohua,Guo, Xiaoguang,Jin, Zhuji,Kang, Renke,Guo, Dongming.Material removal characteristics of precorroded Lu2O3 laser crystals and elastic deformation mo...[J],TRIBOLOGY INTERNATIONAL,2020,143
马进,金洙吉,朱祥龙,康仁科,李俊卿.环抛机直驱电机转台系统设计[J],组合机床与自动化加工技术,2019,9:68-71
徐振哲,金洙吉,姜冠楠,施远,郭东明.控制浅小孔电解加工深度的研究[J],现代制造工程,2019,8:68-73
周忠正,金洙吉,牛林,刘作涛,王泽北,施远.钨合金电化学腐蚀层性质的研究[J],新技术新工艺,2019,5:53-57
万策,金洙吉,吴頔,刘作涛,司立坤.大径厚比铜片的化学机械抛光[J],金刚石与磨料磨具工程,2018,38(3):81-85
孙志明,金洙吉,韩晓龙,范康男,司立坤.钇铝石榴石晶体的机械抛光工艺[J],金刚石与磨料磨具工程,2018,38(1):73-77
孙晶,程玮,宋金龙,陆遥,孙延奎,黄柳,刘新,金洙吉.Fabrication of Superhydrophobic Micro Post Array on Aluminum Substrates Using Mask Electrochemica...[J],Chinese Journal of Mechanical Engineering,2018,31(1)
牛林,金洙吉,周中正,董志刚,朱祥龙.Study on Electrochemical Effect in Electrochemical Grinding of Tungsten Alloy[A],2018
安润莉,韩晓龙,朱祥龙,金洙吉,白倩,郭东明.Effect of polishing plate properties on YAG crystal disk polishing[A],2018
Liu, Jiyu,Liu, Xin,Liu, Shuo,Chen, Faze,Wang, Guansong,Sun, Jin,Song, Jinlong,Huang, Liu,Zheng, Huanxi,Jin, Zhuji.Long-lasting oil wettability patterns fabrication on superoleophobic surfaces by atmospheric pr...[J],MICRO & NANO LETTERS,2017,12(12):1000-1005
Liu, Ziai,Zhao, Danyang,Wang, Xuyue,Song, Jinlong,Roy, Tamal,Li, Shude,Liu, Jiyu,Huang, Liu,Liu, Xin,Jin, Zhuji.Pouring-type gravity-driven oil-water separation without water bridge[J],MICRO & NANO LETTERS,2017,12(10):744-748
魏东光,金洙吉,姜冠楠.超硬涂层磨削工艺实验研究[J],精密制造与自动化,2017,2:60-64
张浩然,金洙吉,王紫光,韩晓龙.聚氨酯抛光垫机械抛光钆镓石榴石晶片[J],金刚石与磨料磨具工程,2017,37(2):26-30
李金元,金洙吉.高纯钨磨削加工试验研究[J],航空制造技术,2017,6:55-59
Guo, Xiaoguang,Li, Qiang,Liu, Tao,Kang, Renke,Jin, Zhuji,Guo, Dongming.Advances in molecular dynamics simulation of ultra-precision machining of hard and brittle mate...[J],FRONTIERS OF MECHANICAL ENGINEERING,2017,12(1,SI):89-98
郭晓光,李洋,翟昌恒,康仁科,金洙吉.单晶硅多次加工时的亚表面损伤仿真分析[J],中国科技论文,2017,12(4):374-378
Huang, Liu,Song, Jinlong,Lu, Yao,Chen, Faze,Liu, Xin,Jin, Zhuji,Zhao, Danyang,Carmalt, Claire J.,Parkin, Ivan P..Superoleophobic surfaces on stainless steel substrates obtained by chemical bath deposition[J],MICRO & NANO LETTERS,2017,12(2):76-81
宋金龙,金洙吉,刘新.A Twice Electrochemical Etching Method to Fabricate Superhydrophobic-Superhydrophilic Patterns fo...[J],Scientific Reports,2017,7:8816-8828
金洙吉,谢飞,郭晓光,史双佶.单晶金刚石切削模具钢磨损机理的分子动力学仿真[J],纳米技术与精密工程,2016,14(6):410-415
Li Z.,Bao Y.,Kang R.K.,Dong Z.G.,Zhou P.,Jin Z.J..An advanced support method of aircraft skin mirror milling - Fluid lubricating support[A],2016,874:469-474
戴恒震,油艳红,戴智弘,金洙吉.使用雾化液的K9光学玻璃化学机械磨削[J],金刚石与磨料磨具工程,2016,36(4):6-12
Song, Jinlong,Parkin, Ivan P.,Huang, Liu,Lu, Yao,Liu, Xin,Deng, Xu,Yang, Xiaolong,Huang, Shuai,Sun, Jing,Jin, Zhuji.Fabrication of Long-Term Underwater Superoleophobic Al Surfaces and Application on Underwater L...[J],SCIENTIFIC REPORTS,2016,6:31818
郭晓光,刘涛,翟昌恒,苑泽伟,金洙吉,郭东明.过渡金属作用下的金刚石石墨化机理研究[J],机械工程学报,2016,52(20):23-29
Niu, Fangyong,Wu, Dongjiang,Ma, Guangyi,Wang, Jiangtian,Zhuang, Juan,Jin, Zhuji.Rapid Fabrication of Eutectic Ceramic Structures by Laser Engineered Net Shaping[A],2016,42:91-95
朱祥龙,康仁科,金洙吉,张璧.Experimental research on dressing parameters of the plate in planetary double[A],2016,874:172-177
刘新,宋金龙,金洙吉,徐文骥.Controllable Water Adhesion and Anisotropic Sliding on Patterned Superhydrophobic Surface for Dro...[J],Journal of Physical Chemistry C,2016,120(3):7233-7240
马广义,金洙吉,吴东江.Effects of Pulse Parameters on Weld Geometry and Microstructure in Pulsed Laser Welding Ni-base A...[J],Metals,2016,6(10):237-237
宋金龙,刘新,金洙吉,赵丹阳.Superoleophobic surfaces on tainless steel substrates obtained by chemical bath deposition[J],Micro & Nano Letters,2016,12(2):76-81
Liu, Jiyu,Chen, Faze,Zheng, Huanxi,Liu, Shuo,Sun, Jing,Huang, Shuai,Song, Jinlong,Jin, Zhuji,Liu, Xin.Adjusting the stability of plasma treated superhydrophobic surfaces by different modifications ...[J],RSC ADVANCES,2016,6(83):79437-79447
Huang, Shuai,Parkin, Ivan P.,Song, Jinlong,Lu, Yao,Lv, Cunjing,Zheng, Huanxi,Liu, Xin,Jin, Zhuji,Zhao, Danyang,Carmalt, Claire J..Power-free water pump based on a superhydrophobic surface: generation of a mushroom-like jet an...[J],JOURNAL OF MATERIALS CHEMISTRY A,2016,4(36):13771-13777
Guo, Xiaoguang,Zheng, Guilin,Kang, Renke,Jin, Zhuji,Guo, Dongming.光滑粒子流体动力学方法模拟石英玻璃超精密切削过程[J],硅酸盐学报,2015,44(1):142-147
李娟,杨晓龙,周诗宁,金洙吉,徐文骥.铝基超疏水表面亲水微坑粘附性能研究[A],2015,5
耿星,郭东明,金洙吉,张兰芳.精密导电滑环表面微槽车削性能[J],宇航材料工艺,2015,45(4):108-113
郭晓光,翟昌恒,金洙吉,郭东明.铁基作用下的金刚石石墨化研究[J],机械工程学报,2015,51(17):162-168
Guo, Xiaoguang,Zhai, Changheng,Kang, Renke,Jin, Zhuji.The mechanical properties of the scratched surface for silica glass by molecular dynamics simul...[J],JOURNAL OF NON-CRYSTALLINE SOLIDS,2015,420:1-6
刘彩红,金洙吉.核主泵用流体静压密封环热装式夹具设计及预变形分析[J],机械工程师,2015,7:7-9
张涛,金洙吉,王鹏川.滚镀法制备磁性磨料的工艺研究[J],电镀与涂饰,2015,34(8):449-453
林佳志,金洙吉,史双佶,钟秀虹,姜冠楠.金刚石抛光用钨合金的热压烧结[J],中国有色金属学报,2015,25(3):682-689
薛洪明,金洙吉,史卓颖.单晶金刚石机械研磨与化学机械抛光工艺[J],纳米技术与精密工程,2015,13(2):102-107
Zhou, Ping,Dong, Zhigang,Kang, Renke,Jin, Zhuji,Guo, Dongming.A mixed elastohydrodynamic lubrication model for simulation of chemical mechanical polishing wi...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2015,77(1-4):107-116
翟昌恒,张亮,郭晓光,金洙吉,郭东明.光学石英玻璃纳米划痕性能仿真研究（英文）[J],强激光与粒子束,2015,02:267-271
翟昌恒,郭晓光,金洙吉,郭东明,张亮.光学石英玻璃纳米划痕性能仿真研究[J],强激光与粒子束,2015,27(2):259-263
李治伟,周平,金洙吉.粗糙薄层弹性体接触刚度分析[J],摩擦学学报,2015,35(1):53-58
钟秀虹,郭东明,史双佶,金洙吉,林佳志.金刚石抛光用W-Mo-Cr合金粉末的机械合金化工艺研究[J],热加工工艺,2015,44(20):25-29
郭晓光,金洙吉,郭东明.Simulation of nanoscratch properties of quartz glass with molecular dynamics method[J],High power laser and particle beams,2015,27(2):1-5
郭晓光,金洙吉,郭东明.Modelling the effects of tool edge radius on micromachining based on smooth particle hydrodynamic...[J],Int. J. Machining and Machinability of Material,2015,16(3-4)
郭晓光,翟昌恒,张亮,金洙吉,郭东明.光学石英玻璃纳米级加工性能[J],光学精密工程,2014,22(11):2959-2966
周平,戴恒震,金洙吉,王宇,康仁科,郭东明.周向波度密封环预变形平面研磨加工中的变形分析[J],机械工程学报,2014,51(11):171-176
金洙吉,史双佶.化学机械协同作用抛光金刚石的发展与研究[A],2014,457-462
Li, Shou-Zhe,Li, Hong,Zhang, Jialiang,Wang, Shangmin,Wang, Yong-Xing,Jin, Zhu-Ji.Effect of Transmission Line on Impedance Matching of Atmospheric-Pressure Radio-Frequency Capac...[J],IEEE TRANSACTIONS ON PLASMA SCIENCE,2014,42(6):1654-1660
郭晓光,金洙吉,康仁科.Research on elastic-plastic transition and hardening effect on monocrystalline silicon surfaces[A],2014,101-106
Guo X.,Zhang X.,Liu Z.,Zhang D.,Jin Z.,Guo D..Modelling the effects of tool edge radius on micro machining based on smooth particle hydrodynami...[J],International Journal of Machining and Machinability of Materials,2014,16(3-4):303-317
京公网安备 11010802027423号