近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
王琪.残余应力对激光修复紧凑拉伸试件疲劳性能的影响[J],热加工工艺,2021,49(4):11-16
马书泽.激光修复金属表面缺陷检测系统研究与开发[J],机电工程技术,2021,49(8):7-10
郭风雷.基于J积分的裂纹尖端激光修复效果研究[J],应用激光,2021,40(6):991-997
Hulio, Zahid Hussain.Does wind speed effects performance and cost of energy? A case study of wind farm[J],International Journal of Energy Sector Management,2021,14(5):953-974
Yinyin Li.Crystal plasticity assessment of the effect of material parameters on contact depth during spheri...[J],Continuum Mechanics and Thermodynamic,2021
Wang, Jie.Numerical assessment on fatigue damage evolution of materials at crack tip of CT specimen based...[J],THEORETICAL AND APPLIED FRACTURE MECHANICS,2021,109
Jiang, Wei,Wang, Cunshan,Li, Yinyin,Guo, Fenglei,Fang, Guanglei,Yu, Qun.Optimization of laser repair parameters for precracked 304 stainless steel components with nano...[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS,2020,234(9):1280-1288
Liu, Huahan,Dong, Qiang,Jiang, Wei.A dynamic reliability assessment methodology of gear transmission system of wind turbine[J],ENGINEERING COMPUTATIONS,2020,37(8):2685-2710
Jiang, Wei,Guo, FengLei,Fang, Guanglei,Li, Yinyin.Effect of Laser Parameters on Microstructure and Fracture Properties of Repaired Cracks with Mi...[J],JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME,2020,142(5)
Hulio, Zahid Hussain,Jiang, Wei.Wind energy potential assessment for KPT with a comparison of different methods of determining We...[J],International Journal of Energy Sector Management,2020,14(1):59-84
Hulio, Zahid Hussain,Jiang, Wei,Rehman, S..Techno - Economic assessment of wind power potential of Hawke's Bay using Weibull parameter: A ...[J],ENERGY STRATEGY REVIEWS,2019,26
Li, Yinyin,Jiang, Wei.DIC-based J-integral evaluation of laser repaired cracks with micro/nanomaterial addition[J],FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES,2019,42(10):2262-2275
蒋玮,王琪,王杰.基于ABAQUS的激光修复裂纹尖端热力耦合仿真分析平台开发[A],2019,6
徐强,蒋玮.基于Web的疲劳寿命分析网络平台的研发[J],机械,2019,46(6):23-26,37
Li, Yinyin,Jiang, Wei.Multiscale finite element based trans-scale calculation method for polycrystalline materials[J],MATERIALS RESEARCH EXPRESS,2019,6(3)
Jiang, Wei,Liu, Huahan.Reliability analysis of the precision assembly process of a scaled stator can of the AP1000 rea...[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE,2019,233(5):1504-1519
房广雷,蒋玮,王琪.激光止裂过程中温度场数值模拟研究[J],机械工程师,2019,1:34-37
Wang, Jie,Jiang, Wei.Fatigue Failure Analysis on Precracked 304 Stainless Steel Components Repaired by Laser with Ad...[J],SOLDAGEM & INSPECAO,2019,24:2408-2418
Wang, Jie,Jiang, Wei,Wang, Qi.Experimental and numerical evaluation of fatigue crack growth rate based on critical plasticall...[J],INTERNATIONAL JOURNAL OF FATIGUE,2019,118:87-97
Wang, Jie,Jiang, Wei,Wang, Qi.Numerical Simulation and Experimental Studies on Elastic-Plastic Fatigue Crack Growth[J],CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES,2019,118(2):377-395
Wang, Jie,Jiang, Wei,Li, Yinyin,Wang, Qi,Xu, Qiang.Numerical assessment of cyclic J-integral Delta J for predicting fatigue crack growth rate[J],ENGINEERING FRACTURE MECHANICS,2019,205:455-469
YY. Li,蒋玮.Crystal plasticity assessment of the effect of material parameters on contact depth during spheri...[A],2019,87-88
Hulio, Zahid H.,Jiang, Wei.Assessment of the apparent performance characterization along with levelized cost of energy of ...[J],ENERGY EXPLORATION & EXPLOITATION,2018,36(6):1708-1728
Wei, Jiang,Hulio, Zahid Hussain,Rashid, Haroon.Site specific assessment of wind characteristics and determination of wind loads effects on wind ...[J],International Journal of Energy Sector Management,2018,12(3):341-363
邵志龙,蒋玮.基于Fluent的金属粉末气体输送喷嘴结构设计及优化[J],现代机械,2018,4:6-10
崔玉,蒋玮.基于JAVA的多轴疲劳寿命可视化平台开发[J],科学技术与工程,2018,18(21):212-218
蒋玮,蒋险峰,黄裕龙.基于数字图像相关的J积分测量方法[J],机械强度,2018,03:687-694
房广雷,蒋玮,王琪.激光止裂过程中温度场数值模拟研究[J],机械工程师,2018
Zahid Hussain Hulio,蒋玮.Site specific technical and economic analysis of wind potential and energy generation using Weibu...[J],World Journal of Science, Technology and Sustainable Development,2018,5(1):35-53
蒋玮,刘华汉.Reliability analysis of the precision assembly process of a scaled stator can of the AP1000 react...[J],Proc IMechE Part C: J Mechanical Engineering Science,2018
蒋玮,Zahid Hussain Hulio,Haroon Rashid.Site specific assessment of wind characteristics and determination of wind loads effects on wind ...[J],International Journal of Energy Sector management,2018,12(3):341-363
Hulio, Zahid Hussain,Jiang, Wei,Rehman, S..Technical and economic assessment of wind power potential of Nooriabad, Pakistan[J],ENERGY SUSTAINABILITY AND SOCIETY,2017,7(1)
Jiang, Wei,Jiang, Xianfeng.Laser Repair With Addition of Nano-WC on Microstructure and Fracture Behavior of 304 Stainless ...[J],JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME,2017,139(4)
Jiang, Wei,Jiang, Xianfeng,Huang, Yulong.Influence of welding conditions on crack opening displacements in welded CT specimens[J],MATERIALS TESTING,2017,59(7-8):635-641
Hulio Z.H.,Jiang W..Wind climate parameters, performance and reliability assessment of wind energy farm[J],International Journal of Energy Sector Management,2017,11(3):503-520
Hulio, Zahid Hussain,Jiang, Wei.Wind climate parameters, performance and reliability assessment of wind energy farm[J],International Journal of Energy Sector Management,2017,11(3):503-520
Liu, H. H.,Jiang, W..Measurement and control system design for the assembly of stator can[A],2017,52
蒋玮.Assessment of site specific wind potential, energy generation and sensitivity analysis[A],2017
Liu H.H.,Jiang W..Measurement and control system design for the assembly of stator can[A],International Conference on Energy Engineering and Environmental Protection, EEEP 2016,2016,52(1)
Liu, H.H.,Jiang, W..Measurement and control system design for the assembly of stator can[A],2016,52(1
王秋志,蒋玮,刘华汉.制造与装配误差对圆柱滚子轴承接触应力的影响[J],现代机械,2016,4:32-37
Liu H.,Jiang W..A Weighted Saddlepoint Approximation Method for System Reliability Analysis[J],International Journal of Reliability, Quality and Safety Engineering,2016,23(4)
蒋玮.Measurement and control system design for the assembly of stator can on the stator core[A],2016,52(1):1-7
Liu H.,Jiang W.,Hulio Z.H.,Wang Q..Estimation of system reliability by using the PLS-regression based corrected response surface met...[J],Eksploatacja i Niezawodnosc,2016,18(2):260-270
Liu, Huahan,Jiang, Wei,Hulio, Zahid Hussain,Wang, Qiuzhi.ESTIMATION OF SYSTEM RELIABILITY BY USING THE PLS-REGRESSION BASED CORRECTED RESPONSE SURFACE M...[J],EKSPLOATACJA I NIEZAWODNOSC-MAINTENANCE AND RELIABILITY,2016,18(2):260-270
黄裕龙,蒋玮,蒋险峰.含裂纹缺陷结构J积分计算方法研究[J],现代机械,2015,4:33-37
曾庆团,蒋玮,刘海林.基于LabVIEW与DS18B20的实时温度采集系统设计[J],自动化应用,2015,7:92-94
刘华汉,蒋玮,杨光辉,吕海霆.随机变量非正态分布且相关的机械零件单模失效可靠度分析[J],大连理工大学学报,2015,55(1):22-30
Syed, Rizwanulhaque,Jiang, Wei,Wang, Cunshan,Sabir, M. Iqbal.Fatigue life of stainless steel 304 enhancement by addition of multi-walled carbon nanotubes (M...[J],JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY,2015,29(1):291-296
周璇,蒋玮,杨光辉,刘华汉.风电齿轮齿根弯曲应力及裂纹特性分析[J],现代机械,2014,6:24-28
Wu Mingbo,Wang Yuwei,Jiang Wei,Sun Qiqian,Zheng Jingtang,Qiu Jieshan,Li Shibin.Improvements of heat resistance and adhesive property of condensed poly-nuclear aromatic resin ...[J],PETROLEUM SCIENCE,2014,11(4):578-583
Rizwanulhaque Syed,蒋玮,裴斐,曾庆团,于子淳,高远长.一种新型简捷式疲劳裂纹修复仪概念设计[J],大连理工大学学报,2014,54(5):511-515
刘华汉,蒋玮.内压法装配屏蔽构件与空槽定子铁芯的数值分析[J],中国机械工程,2014,25(14):1967-1971,1972
Syed, Rizwanulhaque,Jiang, Wei.Fatigue Crack Behavior of Stainless Steel 304 by the Addition of Carbon Nanotubes[J],JOURNAL OF NANOMATERIALS,2014,2014
Hao, M.,Jiang, W..AMEsim based simulation on hydraulic experiment rig for assembly of stator components[J],Journal of Shanghai Jiaotong University (Science),2013,18(5):570-576
郝明,蒋玮.核主泵定子屏蔽套装配中PLC控制系统设计[J],液压与气动,2013,6:54-58
Liu, Huahan,Jiang, Wei,Hao, Ming.A new method used in assembly of the stator component and its limit fluid pressure determinatio...[J],NUCLEAR ENGINEERING AND DESIGN,2013,256:256-263
蒋玮.A New Method Used in Assembly the Stator Component and Its Limit Fluid Pressure Determination[J],Nuclear Engineering and Design,2013,256(3):256-263
Ren, Deliang,Jiang, Wei,Yang, Jinsong.XFEM Based Analysis of the Crack Tip Stress Fields on a Three-Point Bending Specimen[A],2012,300-301:1114-1117
Rizwan U.H.S.,Jiang W.,Wen J.X.,Mussie A.H..Advancement of laser micro-welding[A],2012,628:183-186
京公网安备 11010802027423号