近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1]Xu, Zheng,Zhu, Ping,Xu, Xiaoyu,Zhao, Wei,Wang, Xiaodong,Liu, Junshan,Wang, Liding.Droplet-patterning of viscous adhesive assisted with microfluidic technique[J],INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES,2020,98
[2]Zhu, Ping,Xu, Zheng,Xu, Xiaoyu,Wang, Dazhi,Wang, Xiaodong,Yan, Ying,Wang, Liding.Squeezing Dynamic Mechanism of High-Viscosity Droplet and its Application for Adhesive Dispensing in Sub-Nanoliter Resolution[J],MICROMACHINES,2019,10(11)
[3]金仕亚,王晓东.导电游丝激光锡膏微焊接[J],焊接,2019,6:15-21
[4]牛文婷,张志勇,王晓东,高习义.面向生产线的全自动微小零件装配系统研制[J],内燃机与配件,2019,7:17-20
[5]娄志峰,郝秀朋,刘力,王晓东.圆光栅配合自准直仪测量主轴径向运动误差[J],光学精密工程,2019,27(9):2053-2061
[6]由博,王晓东.衔铁压装偏摆误差的仿真研究[J],机械设计与制造,2019,4:70-72,77
[7]Hamidnia, M.,Luo, Y.,Wang, X. D..Application of micro/nano technology for thermal management of high power LED packaging - A review[J],APPLIED THERMAL ENGINEERING,2018,145:637-651
[8]张伟超,娄志峰,王兴远,王晓东.过盈连接组件超声辅助压装减摩分析[J],现代机械,2018,4:1-5
[9]李凯,罗怡,王晓东,孙屹博.胶层热传递对挠性摆式微加速度计温度滞环的影响[J],传感技术学报,2018,31(7):981-986
[10]王晓东,张梦迪,孙屹博,罗怡.力矩器磁场对微小加速度计非线性误差的影响[J],传感技术学报,2018,31(7):993-997
[11]由博,王晓东.射流盘组件压装技术研究[J],制造技术与机床,2018,7:134-137
[12]Hamidnia, Mohammad,Luo, Yi,Wang, Xiaodong,Jing, Gang.Thermal performance optimization of Si micro flat heat pipes by Box-Behnken design[J],MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE ANDPROCESSING SYSTEMS,2018,24(7):3085-3094
[13]任同群,黄海亭,王晓东,刘钰.微装配中变焦变倍视觉系统标定及自动聚焦[J],红外与激光工程,2018,47(11):193-202
[14]由博,王晓东.衔铁组件精密压装技术及设备[J],机械设计与制造,2018,3:140-143
[15]Ren, Tongqun,Hui, Meiling,Wang, Xiaodong,Zhang, Zhiyong,Liang, Junsheng.Structural state inspection using dual-tree quaternion wavelet transform[J],Journal of Vibroengineering,2018,20(1):138-151
[16]Hamidnia, Mohammad,Luo, Yi,Wang, Xiaodong,Li, Congming.Experimental investigation on the thermal performance of Si micro-heat pipe with different cross-sections[J],MODERN PHYSICS LETTERS B,2017,31(30)
[17]凌四营,李军,于佃清,王坤,王晓东,王立鼎.安装误差对直齿标准齿轮螺旋线偏差的影响规律[J],光学精密工程,2017,25(9):2367-2376
[18]许崇林,娄志峰,王兴远,王晓东.过盈连接组件超声辅助压装装置及技术[J],现代机械,2017,4:1-3,106
[19]徐征,陈聿夫,王晓东,孙谦.基于显微视觉的伺服阀力矩马达气隙检测系统[J],纳米技术与精密工程,2017,15(4):300-304
[20]罗怡,于子程,甲宸,王晓东.蒸汽腔平板微热管仿真及传热性能测试[J],航空制造技术,2017,14:30-36,43
[21]由博,王晓东.基于压力-位移曲线和最大压装力的衔铁组件压装质量预测[J],制造技术与机床,2017,7:119-123
[22]Li, Congming,Wang, Xiaodong,Zhou, Chuanpeng,Luo, Yi,Li, Zhixin,Li, Sidi.New encapsulation method using low-melting-point alloy for sealing micro heat pipes[J],Joint 18th International Heat Pipe Conference (IHPC) / 12thInternational Heat Pipe Symposium (IHPS),2017,31(6):2621-2626
[23]王晓东,罗怡.Effect of Adhesion Force on Reliable Operation of Micro Parts[A],中国微米纳米技术学会第十九届学术年会,2017
[24]罗怡,王晓东.Improve the Performance of Micro Heat Pipe by Surface Modification[A],2017
[25]王晓东,罗怡.LabVIEW Based Control System for Automatic Precise Indium Packaging[A],2017
[26]Ling, Siying,Wang, Kun,Yu, Baodi,Wang, Xiaodong,Wang, Liding.Improvement of gear pitch machining accuracy based on the principle of phase-transfer gear-grinding technique[A],PROCEEDINGS OF THE 2017 3RD INTERNATIONAL FORUM ON ENERGY, ENVIRONMENTSCIENCE AND MATERIALS (IFEESM 2017),2017,120:607-614
[27]王晓东,罗怡.The Influence of Moment Magnetic Field on Nonlinear Error of Micro Accelerometer[A],中国微米纳米技术学会第十九届学术年会,2017
[28]罗怡,王晓东.The influence of heat transfer and creep effect to bias error of hysteresis for micro accelerometer[A],2017
[29]李聪明,罗怡,周传鹏,王晓东.微热管红外测温系统的设计[J],光学精密工程,2016,34(10):2449-2455
[30]Yang J.,Ren T.-Q.,Wang X.-D..Automatic measurement equipment for micrometric displacement of piezoelectric ceramic piece of displacement compensator[J],Guangxue Jingmi Gongcheng/Optics and Precision Engineering,2016,24:461-467
[31]徐征,陈聿夫,孙谦,王晓东,周宗磊.机器视觉精密测量中的显微光学聚焦[J],光学精密工程,2016,24(9):2095-2100
[32]Luo, Yi,Yu, Beike,Wang, Xiaodong,Li, Congming.A Novel Flat Micro Heat Pipe With a Patterned Glass Cover[J],IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY,2016,6(7):1053-1057
[33]Wang, Dazhi,Ren, Tongqun,Wang, Xiaodong,Zha, Wen,Feng, Li,Ma, Qian,Liu, Xianming,Yang, Ning,Xu, Zheng,Zhao, Xiaojun,Liang, Junsheng.Electrohydrodynamic jet printing and a preliminary electrochemistry test of graphene micro-scale electrodes[J],JOURNAL OF MICROMECHANICS AND MICROENGINEERING,2016,26(4)
[34]Luo Y.,Li Z.-X.,Zhou C.-P.,Wang X.-D.,You B..Thermal behavior of silicon-copper micro vapor chamber for high power LEDs[J],Optoelectronics Letters,2016,12(2):124-127
[35]张宗波,贺庆强,罗怡,王晓东,王立鼎.超声波塑料焊接临界温度场分析[J],焊接学报,2016,37(1):20-22
[36]罗怡,王晓东.Experimental investigation on the thermal performance of Si micro heat pipe with different cross-sections[A],2016
[37]罗怡,王晓东.Flat Micro Heat Pipe with Reservoir-Groove Combined Wick Structure[A],2016
[38]王晓东,罗怡.A new encapsulation method using low-melting-point alloy to seal micro heat pipe[A],2016
[39]罗怡,王晓东.Influence of Parallel and Trapezoidal Wick Structures to the Heat Transfer Capability of MHPs[A],2016
[40]任同群,王晓东.位移补偿器压电陶瓷微位移自动测量设备[J],光学精密工程(增刊),2016,24(10):461-467
[41]罗怡,王晓东,王大志.Graphene Modified Micro Heat Pipe for LED Modules[A],2016
[42]李聪明,罗怡,周传鹏,王晓东.微热管红外测温系统的设计与实验[J],光学精密工程,2016,24(10):2449-2455
[43]李聪明,周传鹏,罗怡,哈米迪,王晓东,由博.Experimental study on high-power LED device integrated with micro heat pipe[J],OPTOELECTRONICS LETTERS,2016,12(1):31-34
[44]孙屹博,李芳,苑宇,王晓东.导电游丝超声波去装配应力过程的影响因素[J],中国工程机械学报,2015,13(5):436-440
[45]Li, Congming,Luo, Yi,Zhou, Chuanpeng,Shan, Qing,Wang, Xiaodong.Charging method of micro heat pipe for high-power light-emitting diode[J],MICRO & NANO LETTERS,2015,10(10):518-522
[46]Ruan Y.,Ren T.-Q.,Wang X.-D.,Wang L.-D..Automatic precision assembly system for trans-scale miniature parts[J],Guangxue Jingmi Gongcheng/Optics and Precision Engineering,2015,23:259-265
[47]佘东生,杨一柳,魏泽飞,王晓东,王立鼎.基于激波的MEMS微结构底座冲击激励方法研究[J],仪器仪表学报,2015,36(8):1892-1900
[48]Hamidnia, Mohammad,Zou, Liangliang,Luo, Yi,Wang, Xiaodong.Investigation of Thermal Characteristics of a Silicon-Based LED Packaging Module[A],16 int conf elect packaging technology,2015,530-533
[49]Luo, Yi,Yu, Beike,Shan, Qing,Wang, Xiaodong.A silicon-aluminum micro heat sink for light emitting diode (LED) chips[A],16 int conf elect packaging technology,2015,526-529
[50]Luo, Yi,Yu, Beike,Zhou, Chuanpeng,Wang, Xiaodong.Micro Heatpipe Integrated with LED Silicon Substrate[A],16 int conf elect packaging technology,2015,85-88
[51]Wang, Xiaodong,Zhou, Chuanpeng,Li, Congming,Li, Zhixin,Luo, Yi.Comparison of thermal characteristics of Light-emitting Diode chips and electrical heating source[A],16 int conf elect packaging technology,2015,638-641
[52]Luo, Yi,Zhou, Zonglei,Wang, Xiaodong,Zhang, Qingqing,Shi, Ke.Automatic Array Jet Dispensing System Based on Visual System[A],IEEE International Conference on Information and Automation 2015,2015,2148-2152
[53]佘东生,杨一柳,李琨,王晓东,王立鼎.T型硅微悬臂梁频率温度系数的测试研究[J],仪器仪表学报,2015,36(7):1470-1478
[54]阮冶,任同群,王晓东,王立鼎.跨尺度微小零件自动精密装配系统[A],2015年光学精密工程论坛,2015,Vol.23:259-265
[55]娄志峰,王晓东,由博,许阳.精密微小组件压装技术及仪器[J],光学精密工程,2015,23(6):1605-1611
[56]Qi, Na,Luo, Yi,Wang, Xiao-dong,Wang, Li-ding,Zhang, Zong-bo.Local thermal-assisted ultrasonic embossing for the fabrication of polymer microstructures[J],MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE ANDPROCESSING SYSTEMS,2015,21(5,SI):1101-1110
[57]Li, Congming,Luo, Yi,Zhou, Chuanpeng,Shan, Qing,Wang, Xiaodong.Using peristaltic pump to charge micro heat pipe for high-power LED[A],IEEE 10th International Conference on Nano/Micro Engineered andMolecular Systems (NEMS),2015,164-167
[58]罗怡,马玉辉,闫旭,祁娜,王晓东.能量控制模式下聚合物超声波微压印成形[J],哈尔滨工业大学学报,2015,47(3):103-106
[59]王晓东,单镇东,罗怡,李聪明.高精度多环片自动装配控制技术[J],纳米技术与精密工程,2015,13(2):141-147
[60]李聪明,罗怡,刘刚,王晓东.微平板热管导热性能测试系统[J],测试技术学报,2015,1:1-6
京公网安备 11010802027423号