近期论文
查看导师新发文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
[1]代一诚,屈福政,贾天,苏政.环行起重机抗震模拟实验研究及有限元分析[J],起重运输机械,2019,10:37-42
[2]Zheng, Feng Jie,Zong, Chao Yong,Dempster, William,Qu, Fu Zheng,Song, Xue Guan.A Multidimensional and Multiscale Model for Pressure Analysis in a Reservoir-Pipe-Valve System[J],JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME,2019,141(5)
[3]张春光,屈福政,杨煜兵,李上青,张俊峰,安磊.TBM驱动系统结构刚度对刀盘螺栓性能的影响[J],工程机械,2019,50(4):15-23
[4]袁任远,屈福政,贾天,代一诚.核环吊缩尺模型抗震性能动力时程分析[J],世界地震工程,2019,35(1):36-44
[5]杨庆乐,屈福政,于志远,谢正义.考虑基础弹性的履带式起重机回转工况分析[J],大连理工大学学报,2019,59(2):146-153
[6]张春光,屈福政,宁诗哲,谢正义.基于载荷分布和统计的TBM主轴承寿命计算[J],东北大学学报(自然科学版),2018,39(7):1022-1027
[7]Gao, Pei-xin,Zhai, Jing-yu,Qu, Fu-zheng,Han, Qing-kai.Vibration and damping analysis of aerospace pipeline conveying fluid with constrained layer damping treatment[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OFAEROSPACE ENGINEERING,2018,232(8):1529-1541
[8]孙杰锋,屈福政,张春光.核电站环行起重机轮压时程分析[J],起重运输机械,2018,4:109-113
[9]宁诗哲,屈福政,张春光.圆柱滚子轴承接触分析方法对比[J],起重运输机械,2018,2:130-134
[10]李守巨,王荣成,屈福政,苏冬,刘大强,徐宏伟.地震作用下核环吊楼层反应谱特性研究[J],自然灾害学报,2018,27(1):175-185
[11]Wang, Kefei,Xu, Hongwei,Qu, Fuzheng,Wang, Xin,Shi, Yanjun.A Reliability Analysis framework with Monte Carlo Simulation for Weld Structure of Crane's Beam[A],ADVANCES IN MATERIALS, MACHINERY, ELECTRONICS II,2018,1955
[12]贾天,屈福政,袁任远,代一诚.核环行起重机相似缩尺抗震实验模型设计[J],起重运输机械,2018,10:78-82
[13]武力,李欣芯,关天民,屈福政,张佳媛.盾构刀盘系统掘进性能评价方法研究[J],现代隧道技术,2017,54(5):108-114,121
[14]李守巨,付佳星,王荣成,屈福政,苏冬,刘大强,徐宏伟.地震作用下核环吊动力响应模型的实验相似准则[J],黑龙江科技大学学报,2017,27(5):537-542
[15]潘德国,屈福政,谢正义,孙杰锋.基于蒙特卡罗法的汽车起重机起重臂结构可靠性分析[J],起重运输机械,2017,9:72-76
[16]史聪聪,屈福政,张春光,袁任远.钢丝绳径向力学参数反演[J],起重运输机械,2017,8:4-7
[17]刘俊,屈福政.恒压紧力模组箱体设计研究[J],机械设计与制造,2017,8:190-193
[18]屈福政,孙杰锋,张春光,潘德国.可调被动补偿器海上起重特性研究[J],哈尔滨工程大学学报,2017,38(7):1041-1047
[19]赵丹,屈福政.基于柔性环境的塔式起重机附着特性研究[J],起重运输机械,2017,6:37-41,68
[20]林久标,屈福政.动力蓄电池包冲击累积损伤数值模拟研究[J],机械科学与技术,2017,36(6):938-942
[21]屈福政,孙杰锋,张春光,潘德国.可调被动海上起重补偿器特性研究[J],哈尔滨工程大学学报,2017,07:1-7
[22]刘伟,张春光,屈福政.动臂变幅起重机安全拉索安全性研究[J],起重运输机械,2017,4:1-3
[23]Wang, Kefei,Sun, Xueyan,Zhang, Zihui,Qu, Fuzheng,Shi, Yanjun.Parameter Optimization in GA for Job-Shop Scheduling Problem[A],2017 CHINESE AUTOMATION CONGRESS (CAC),2017,3801-3806
[24]Zhang, Chunguang,Qu, Fuzheng,Guo, Li,Huo, Junzhou,Xie, Zhengyi.Influence of cutterhead system structure on load distribution and life of main bearing[J],JOURNAL OF VIBROENGINEERING,2016,18(7):4164-4177
[25]谢正义,屈福政,张春光,潘德国.基于虚拟样机技术的履带起重机腰绳计算分析[J],机械设计与制造,2016,9:19-22
[26]张春光,屈福政,谢正义,柴荣峰.TBM主轴承中径对滚刀轴向载荷分布的影响[J],哈尔滨工程大学学报,2016,37(9):1269-1274
[27]Gao, Pei-xin,Zhai, Jing-yu,Yan, Yang-yang,Han, Qing-kai,Qu, Fu-zheng,Chen, Xi-hong.A model reduction approach for the vibration analysis of hydraulic pipeline system in aircraft[J],AEROSPACE SCIENCE AND TECHNOLOGY,2016,49:144-153
[28]刘金,屈福政,刘俊.海上风机整体安装拖航过程动力学仿真[J],机械设计与制造,2016,1:76-79
[29]屈福政,王琪,张春光,潘德国,谢正义.基于光弹实验的销轴连接应力分析[J],机械强度,2016,38(4):686-690
[30]Xie, Z. Y.,Qu, F. Z.,Pan, D. G.,Yang, Q. L.,Zhao, X..Failure calculating and risk assessment method of crane parts[A],5th International Conference on Machinery, Materials Science andEngineering Applications (MMSE),2016,355-361
[31]李钊,张春光,屈福政,宋海洋.基于多目标满意度的履带架拓扑优化研究[J],机械科学与技术,2015,34(10):1488-1492
[32]王丕贵,谢正义,屈福政.依靠塔筒承压实现海上风机整体安装的结构稳定性研究[J],机械设计与制造,2015,9:243-246
[33]Xie Z.Y.,Qu F.Z.,Pan D.G.,Yang Q.L.,Zhao X..Failure calculating and risk assessment method of crane parts[A],5th International Conference on Machinery, Materials Science and Engineering Applications, MMSE 2015,2015,355-362
[34]贾乾忠,李嫚,张弘弢,董海,屈福政.聚晶金刚石复合片非脆性去除磨削机理研究[J],大连理工大学学报,2015,55(3):281-285
[35]冯凯,屈福政.大吨位履带起重机行走机构设计及动力学分析?[J],起重运输机械,2015,3:16-18,19
[36]屈福政,孙奇,谢正义.基于概率-非概率混合模型和贝叶斯网络的汽车起重机起重臂屈曲可靠性分析[J],机械强度,2015,37(1):74-78
[37]孙伟,张旭,屈福政,李守巨,张立勇.基于压力动态平衡的盾构密封舱压力控制方法[J],机械工程学报,2014,50(21):38-44
[38]Sun Qi,Xie Zhengyi,Qu Fuzheng.Truck Crane Hoisting Boom Reliability Analysis Based on Probabilistic and Interval Hybrid Model and Bayesian Network[A],3rd International Conference on Machine Design and ManufacturingEngineering (ICMDME),2014,607:235-241
[39]王彦龙,屈福政.基于ANSYS和MATLAB智能算法的电石热物性参数反演[J],冶金设备,2014,2:23-28
[40]Li Shou-ju,Yu Shen,Qu Fu-zheng.Modeling approaches to pressure balance dynamic system in shield tunneling[J],JOURNAL OF CENTRAL SOUTH UNIVERSITY,2014,21(3):1206-1216
[41]翁志容,屈福政.多卷扬机构同步性能仿真与控制[J],起重运输机械,2013,10:43-46,47
[42]梁亚朋,屈福政.核电工程大吨位环轨起重机参数优化研究[J],起重运输机械,2013,8:28-31
[43]李守巨,于申,孟庆琳,曹丽娟,屈福政.盾构机土仓压力平衡模型参数辨识方法研究[J],地下空间与工程学报,2013,9(4):819-824
[44]宋海洋,屈福政.过山车轮轨摩擦实验台设计及动态性能研究[J],冶金设备,2013,z1:43-46
[45]滕儒民,屈福政,曹旭阳.Research on the section type for telescopic boom of 100M AWP based on similarity theorem[J],Journal of Convergence Information Technology,2013,8(3):812-820
[46]Liu Chang,Qu Fu-zheng,Li Shou-ju,Meng Qing-lin.Optimal arrangement for pressure measurement points in working chamber of earth pressure balance shield[J],JOURNAL OF CENTRAL SOUTH UNIVERSITY,2012,19(7):1883-1891
[47]徐毅,金博,滕弘飞,屈福政.面向中小企业的变粒度双知识网映射零部件设计重用[J],大连理工大学学报,2012,52(1):119-125
[48]滕儒民,屈福政,张志刚,朱苛娄.高空作业车的轨迹控制设计研究[J],大连理工大学学报,2012,52(4):522-528
[49]Teng, Rumin,Qu, Fuzheng,Teng, Yanwei,Cao, Xuyang,He, Hao.Design and Assessment of the Telescopic Boom of 100m AWP Based on Similarity Theorem[A],8th International Conference on Computing and Networking Technology(ICCNT),2012,301-305
[50]李守巨,陈禹臻,王吉喆,屈福政.盾构机密封舱压力控制模型参数辨识[J],计算机工程与应用,2011,47(29):239-241
[51]Meng, Qinglin,Qu, Fuzheng,Li, Shouju.Experimental investigation on viscoplastic parameters of conditioned sands in earth pressure balance shield tunneling[J],JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY,2011,25(9):2259-2266
[52]Li Shouju,Cao Lijuan,Qu Fuzheng,Shangguan Zichang.Control of Dynamical System in Shield Tunneling Using Neural Network[A],9th World Congress on Intelligent Control and Automation (WCICA),2011,28-31
[53]李守巨,屈福政,曹丽娟,孙伟,刘博.土压平衡盾构机密封舱压力控制实验研究[J],煤炭学报,2011,36(6):934-937
[54]孟庆琳,屈福政,李守巨.土体旋转流变仪开发与土压平衡盾构改性土体塑性流动特性实验[J],岩土工程学报,2011,33(10):1642-1648
[55]刘畅,孙铁兵,孟庆琳,于志远,屈福政.土压平衡盾构密封舱压力场模拟实验台设计[J],中国机械工程,2011,22(1):19
[56]武力,屈福政,李守巨.土压平衡盾构改性砂土离散元模型参数反演方法研究[J],大连理工大学学报,2010,50(6):860-866
[57]Li S.,Wu L.,Qu F.,Sun W..Parameter estimation of particle flow model for soils using neural networks[J],Journal of Convergence Information Technology,2010,5(8):3-
[58]车超,金博,滕弘飞,屈福政.基于义原关系的多策略汉语词义消歧方法[J],大连理工大学学报,2010,50(4):603-608
[59]武力,屈福政,孙伟,李守巨,刘畅.基于离散元的土压平衡盾构密封舱压力分析[J],岩土工程学报,2010,32(1):18-23
[60]史彦军,屈福政.A Differential Evolution with Scatter Search for Project Scheduling[A],Applied Mechanics and Materials,2010,26:724-727