近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Lu, Yong,Jiang, Kaiyu,Liu, Yuying,Zhang, Yan,Wang, Minjie.Study on mechanical properties of co-injection self-reinforced single polymer composites based ...[J],POLYMER TESTING,2020,83
Wang, Hairui,Zhao, Danyang,Jin, Yifei,Wang, Minjie,You, Zhong,Yu, Guangrui.Study of collapsed deformation and energy absorption of polymeric origami-based tubes with visc...[J],THIN-WALLED STRUCTURES,2019,144
Wei, Z. C.,Guo, M. L.,Wang, M. J.,Li, S. Q.,Wang, J..Prediction of cutting force for ball end mill in sculptured surface based on analytic model of ...[J],MACHINING SCIENCE AND TECHNOLOGY,2019,23(5):688-711
候磊,魏兆成,王敏杰,马日光.结晶器铜管内腔加工数控机床结构与工艺研究[J],组合机床与自动化加工技术,2019,6:113-118
胡礼文,魏兆成,王敏杰,马日光.冷却温度对难加工合金切屑形貌影响机理研究[J],工具技术,2019,53(9):22-27
魏云波,王敏杰,赵丹阳,李红霞.可降解聚合物血管支架体外力学性能测试实验研究[J],生物医学工程学杂志,2019,36(04):604-612
张佳琪,王敏杰,刘建业,牛留辉,王金海,李花霞.3D打印直接制造金属模具零件的研究进展[J],模具制造,2019,19(2):72-79
郭明龙,魏兆成,王敏杰,李世泉,刘胜贤.自由曲面平头立铣刀五轴加工铣削力预报[J],机械工程学报,2017,55(7):225-233
刘奎,王敏杰,申振楠,刘潮,马日光.尼龙6棒材挤出成型及制品性能[J],高分子材料科学与工程,2019,35(4):115-121
Wei, Z. C.,Guo, M. L.,Wang, M. J.,Li, S. Q.,Liu, S. X..Prediction of cutting force of ball-end mill for pencil-cut machining[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,100(1-4):577-588
Zhao, Danyang,Sun, Yanjun,Liu, Cong,Zhan, Haiyang,Wang, Minjie,Liu, Junshan,Liu, Yahua.Temperature-regulated directional bounce of impacting droplets on gradient grooves[J],SURFACE & COATINGS TECHNOLOGY,2018,356:132-137
Wang, Hairui,Zhao, Danyang,Jin, Yifei,Wang, Minjie,You, Zhong.Unified parametric modeling of origami-based tube[J],THIN-WALLED STRUCTURES,2018,133:226-234
Li, Hongxia,Liu, Kui,Zhao, Danyang,Wang, Minjie,Li, Qian,Hou, Jianhua.Multi-Objective Optimizations for Microinjection Molding Process Parameters of Biodegradable Po...[J],MATERIALS,2018,11(11)
彭亚运,王敏杰,张富城,刘潮.PEEK微小齿轮注射成型过程的传热分析[J],模具工业,2018,44(9):50-57
王敏杰,唐叶,兰明,王长林,丁国军.滴灌灌水器侧壁斜度和外形曲率对其性能的影响[J],节水灌溉,2018,9:31-36
Zhang Fang-yuan,Duan Chun-zheng,Xu Xin-xin,Wang Min-jie.Influence of cutting condition on white layer induced by high speed machining of hardened steel[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2018,98(1-4):77-84
Duan Chunzheng,Qin Siwei,Sun Wei,Wang Minjie,Zhang Fangyuan.Modeling of dynamic recrystallization in white layer in dry hard cutting by finite elementcellu...[J],JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY,2018,32(9):4299-4312
吴优,王敏杰,魏兆成,马日光.中大直径钢材棒料二辊矫直机凹辊设计方法[J],锻压技术,2018,43(6):80-88
Guo, Chunfang,Sun, Jianxing,Sun, Yanjun,Wang, Minjie,Zhao, Danyang.Droplet impact on cross-scale cylindrical superhydrophobic surfaces[J],APPLIED PHYSICS LETTERS,2018,112(26)
Zhang Fang-yuan,Duan Chun-zheng,Wang Min-jie,Sun Wei.White and dark layer formation mechanism in hard cutting of AISI52100 steel[J],JOURNAL OF MANUFACTURING PROCESSES,2018,32:878-887
Wei, Z. C.,Guo, M. L.,Wang, M. J.,Li, S. Q.,Liu, S. X..Prediction of cutting force in five-axis flat-end milling[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2018,96(1-4):137-152
Guo, Chunfang,Zhao, Danyang,Sun, Yanjun,Wang, Minjie,Liu, Yahua.Droplet Impact on Anisotropic Superhydrophobic Surfaces[J],LANGMUIR,2018,34(11):3533-3540
Gu, Li-Yao,Wang, Min-Jie.Adiabatic shear fracture prediction in high-speed cutting at various negative rake angles and f...[J],ADVANCES IN MANUFACTURING,2018,6(1):41-51
李红霞,付旭,王敏杰,李征,李召军.汽轮发电机基础动力特性分析及优化设计[J],应用力学学报,2018,35(1):178-184
李红霞,赵丹阳,王敏杰.Multi-Objective Optimizations for Microinjection Molding Process Parameters of Biodegradable Poly...[J],Materials,2018,11(11):1-16
Duan, Chunzheng,Zhang, Fangyuan,Sun, Wei,Xu, Xinxin,Wang, Minjie.White layer formation mechanism in dry turning hardened steel[J],JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING,2018,12(2)
Li, Zhen,Wang, Minjie,Cai, Yujun,Jia, Haili.Experimental study on surface topography and fracture strength of worn saw wire in multi-wire s...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2017,93(9-12):4125-4132
赵丹阳,刘韬,李红霞,王敏杰.可降解聚合物血管支架结构优化设计[J],力学学报,2017,49(6):1409-1417
Jiang, K.Y.,Ji, Z.,Li, H.,Wang, M.J.,Yu, T.M..Polymer Flow Behavior Analysis Based on Physical Visualization Technology for Ultrasonic Vibrat...[J],INTERNATIONAL POLYMER PROCESSING,2017,32(3):290-297
Tian, Huiqing,Zhao, Danyang,Wang, Minjie,Jin, Yifei.Effect of Die Lip Geometry on Polymer Extrudate Deformation in Complex Small Profile Extrusion[J],JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME,2017,139(6)
Zhao, Danyang,Wang, Hairui,Wang, Longxian,Wang, Minjie,Yao, Donggang.Experimental and numerical study of microchannel formation in rubber-assisted hot embossing wit...[J],3rd International Conference of Smart Systems Engineering (SmaSys),2017,23(5,SI):1221-1227
Wang, Xinyu,Li, Hongxia,Gu, Junfeng,Li, Zheng,Ruan, Shilun,Shen, Changyu,Wang, Minjie.Pressure Analysis of Dynamic Injection Molding and Process Parameter Optimization for Reducing ...[J],POLYMERS,2017,9(3)
魏兆成,王敏杰,赵丹阳.基于错位分屑原理的难加工材料插铣刀具[A],2017
李红霞,王敏杰,赵丹阳.可降解聚合物血管支架结构与注塑成型工艺优化设计[A],2017
黎振,王敏杰,蔡玉俊,李国和,潘鑫.多线切割中线网可靠度评价方法研究[J],机械工程学报,2017,53(23):174-181
Li, Hongxia,Liu, Yahua,Wang, Xinyu,Wei, Yunbo,Liu, Tao,Gu, Junfeng,Li, Zheng,Wang, Minjie,Zhao, Danyang,Qiao, Aike.Multi-Objective Optimizations of Biodegradable Polymer Stent Structure and Stent Microinjection...[J],POLYMERS,2017,9(1)
魏兆成,王敏杰,王学文,赵丹阳.球头铣刀曲面多轴加工的刀具接触区半解析建模[J],机械工程学报,2016,53(1):198-205
鲁勇,姜开宇,左军超,王敏杰.成型参数对聚合物注塑成型中困气特性影响的可视化分析[J],机械工程学报,2016,53(18):49-56
付旭,李红霞,王敏杰.汽轮发电机基础设计技术综述[J],黑龙江电力,2016,38(5):460-465
Gu, Liyao,Wang, Minjie,Chen, Hui,Kang, Guozheng.Experimental study on the process of adiabatic shear fracture in isolated segment formation in ...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2016,86(1-4):671-679
Wang, Hairui,Guo, Chunfang,Li, Yujie,Liu, Yahua,Wang, Minjie,You, Zhong,Zhao, Danyang.STRUCTURAL DESIGN AND FORMING METHOD OF SINGLE-CURVED SURFACE STRUCTURE BASED ON MIURA-ORIGAMI[A],2016,5B-2016
高毅,魏兆成,王敏杰.铣削力预测研究进展[J],工具技术,2016,50(8):3-8
Gu, Liyao,Kang, Guozheng,Chen, Hui,Wang, Minjie.On adiabatic shear fracture in high-speed machining of martensitic precipitation-hardening stai...[J],JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2016,234:208-216
汤武初,王敏杰,陈光东,孙玉超,许立.高速列车故障轴箱轴承的温度分布研究[J],铁道学报,2016,38(7):50-56
谷丽瑶,王敏杰.高速切削过程绝热剪切局部化断裂预测[J],机械工程学报,2016,52(5):186-192
姜开宇,王敏杰,王龙飞,左军超,杨磊.聚合物熔体环绕型芯充型流动行为的物理可视化分析[J],高分子材料科学与工程,2016,32(1):120-124
Zhao, Danyang,Li, Yujie,Wang, Minjie,Duan, Chunzheng,You, Zhong.FABRICATION OF POLYMER ORIGAMI-BASED V-TYPE FOLDED CORE[A],2016
魏兆成,王敏杰.基于映射的复杂曲面数控加工分析方法[A],2016,34-38
Jiang, Kaiyu,Cai, Keqian,Wang, Minjie,Zhao, Danyang,You, Zhong.Experimental Study of Manufacture and Mechanical Behavior of Sandwich Structure with Composite ...[A],2016
Tian, Huiqing,Zhao, Danyang,Wang, Minjie,Jin, Guobao,Jin, Yifei.Study on extrudate swell of polypropylene in double-lumen micro profile extrusion[J],JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2015,225:357-368
Jin, Guo-Bao,Zhao, Dan-Yang,Tian, Hui-Qing,Zhang, Jian,Wang, Min-Jie,Jin, Yi-Fei.Study on design and experiments of extrusion die for polypropylene single-lumen micro tubes[J],MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS,2015,21(11):2495-2503
Jiang K.,Cai K.,Wang M.,Zhao D.,You Z..Experimental study of manufacture and mechanical behavior of sandwich structure with composite fo...[A],2015,5B-2015
Zhao D.,Li Y.,Wang M.,Duan C.,You Z..Fabrication of polymer origami-based V-type folded core[A],2015,5B-2015
姜开宇,吉智,李豪,王敏杰,于同敏.超声外场作用下聚合物注射成型模内流动行为的物理可视化分析[J],高分子材料科学与工程,2015,31(7):101-106
于同敏,武永强,王敏杰.超声外场对微通道中熔体黏性耗散效应的影响[J],机械工程学报,2015,51(20):79-85
胡培根,王敏杰,姜开宇,蔡克乾.基于DSC实验的液态硅橡胶反应注射成型模拟[J],中国塑料,2015,29(5):70-74
王敏杰,赵丹阳,宋满仓,于同敏.聚合物微成型模具设计与制造技术[J],模具工业,2015,5:7-16,21
刘文静,高毅,王敏杰,魏兆成.锯齿形切屑对切削力影响试验研究[J],金属加工（冷加工）,2015,10:60-61,62
姜开宇,李豪,吉智,于同敏,王敏杰.超声外场对复合材料注射成型流动行为影响的可视化实验[J],高分子材料科学与工程,2015,31(1):98-102
宋满仓,王敏杰,刘冲,刘莹.Experimental Study on WEDM Machining of PCD and PCBN compacts[A],2015,645:52-57
京公网安备 11010802027423号