当前位置: X-MOL首页全球导师 国内导师 › 王福吉

个人简介

教育经历 2001.32005.7大连理工大学机械设计及理论博士 1998.92001.2南方冶金学院机械设计及理论硕士 1994.91998.7南方冶金学院机械设计及理论学士 工作经历 2005.7至今大连理工大学校现代制造技术实验室主任

研究领域

难加工材料高速切削机理及加工工具 功能材料传感器与执行器 加工过程检测与控制 连续碳纤维增强树脂基复合材料 增材制造技术及装备

近期论文

查看导师新发文章 (温馨提示:请注意重名现象,建议点开原文通过作者单位确认)

马建伟.Research of discrete curvature estimation method based on local space parabola[A],The 6th International Conference on Mechanical and Electronics Engineering,2022,577:802-805 王福吉.Reversed-air cooling technology for high-quality drilling of CFRP[J],APPLIED COMPOSITE MATERIALS,2022,录用 王福吉.Reversed-Air Cooling Technology for High-Quality Drilling of CFRP[J],APPLIED COMPOSITE MATERIALS,2022,26(3):857-870 贾振元.Research on the Key Technology of a Testing System of Piezomagnetic Force Transducer[J],JOURNAL OF TESTING AND EVALUATION,2022,37(6):556-565 王福吉.Research on the carbon fibre-reinforced plastic (CFRP) cutting mechanism using macroscopic and mic[J],JOURNAL OF REINFORCED PLASTICS AND COMPOSITES,2022,36(8):555-562 刘慧芳.Research on the constant output force control system for giant magnetostrictive actuator disturbed[J],MECHATRONICS,2022,22(7):911-922 马建伟.Sampling of IGES trimmed surface for an online inspection system[J],INTERNATIONAL JOURNAL OF MATERIALS PRODUCT TECHNOLOGY,2022,46(4):232-243 王福吉.Secondary cutting edge wear of one-shot drill bit in drilling CFRP and its impact on hole quality[J],COMPOSITE STRUCTURES,2022,178:341-352 卢晓红.Simulation Study of Multi-agent-based Network Manufacturing ASP System[A],IEEE International Conference on Service Operations and Logistics and Informatics,2022,2:1849-1853 张博宇.Simulation and experimental analysis on influences of axial cutting-induced vibration on edge trimmi[J],JOURNAL OF MANUFACTURING PROCESSES,2022,68:632-645 Zhao, G.K..Solution space analysis and feasible genetic algorithm for assembly job-shop scheduling problems[J],MATERIALS SCIENCE FORUM,2022,626 627:705-710 Wang, Linping.Solving Complete Job Shop Scheduling Problem Using Genetic Algorithm[A],7th World Congress on Intelligent Control and Automation,2022,8307-8310 贾振元.Strain hysteresis of giant magnetostrictive transducer under varied external stress and magnetic f[A],9th International Symposium on Advances in Abrasive Technology,2022,655-660 贾振元.Statistical Description of Debris Particle Size Distribution in Electrical Discharge Machining[J],Chinese Journal of Mechanical Engineering,2022,24(1):67-72 马建伟.Spindle Speed Selection for High-Speed Milling of Titanium Alloy Curved Surface[J],MATERIALS AND MANUFACTURING PROCESSES,2022,29(3):364-369 Liu H.-F..Study on a giant magnetostrictive actuator with constant output force[J],International Journal of Industrial and Systems Engineering,2022,13(2):197-218 王福吉.Study of Giant Magnetostrictive Thin Films with Gas Sensitive Layer for Use as Gas Concentration S[J],IEEE SENSORS JOURNAL,2022,12(6):1703-1708 王福吉.Study on Characteristics of CU Substrate Giant Magnetostrictive Thin Film based in the Direction o[A],International Conference on Optoelectronics and Microelectronics (ICOM),2022,423-427 马建伟.Study of machining parameter optimization in high speed milling of Inconel 718 curved surface base[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,75(1-4):269-277 王福吉.Structural optimization method of multitooth cutter for surface damages suppression in edge trimmi[J],Journal of Manufacturing Processes,2022,46:204-213 刘华.Study on the design method of giant magnetostrictive force sensor[A],2011 IEEE International Conference on Mechatronics and Automation, ICMA 2011,2022,1098-1103 赵蒙.Study on Step Drill in Drilling CFRP /Al Stack[A],Advances in Transdisciplinary Engineering,2022,9:259-264 马建伟.Surface re-design modelling technology for parts with complex curved surface based on performance co[A],Proceedings of the 11th International Conference on Frontiers of Design and Manufacturing,2022 王飞.RESEARCH ON PIEZOELECTRIC QUARTZ UNDER MULTIDIMENSIONAL FORCES[J],MATERIALS PHYSICS AND MECHANICS,2022,22(1):94-100 王福吉.Research on repair operators in the whole space search genetic algorithm of assembly job shop schedu[A],2012 7th IEEE Conference on Industrial Electronics and Applications, ICIEA 2012,2022,1922-1927 贾振元.Research on a novel force sensor based on giant magnetostrictive material and its model[J],JOURNAL OF ALLOYS AND COMPOUNDS,2022,509(5):1760-1767 马建伟.Research on sample point repairing for free-form curved surface[J],International Journal of Modelling Identification and Control,2022,22(2):178-184 贾振元.Researches on the computer digital control system of giant magnetostrictive actuator[J],MECHATRONICS,2022,19(7):1191-1196 卢晓红.Design and realization of complete software type copying manufacturing CNC system[A],2010 International Conference on Computer Application and System Modeling, ICCASM 2010,2022,9:V939-V943 付饶.Design of a new tool with intermittent-sawtooth structure for damage reduction in drilling of CFRP c[A],17th European Conference on Composite Materials, ECCM 2016,2022 Hao, Jiaxuan.Drill bit with clip-edges based on the force control model for reducing the CFRP damage[J],JOURNAL OF REINFORCED PLASTICS AND COMPOSITES,2022,40(5-6):206-219 阎晋.Editorial for the special issue on manufacturing the future[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE,2022,235(14):2203-2204 马建伟.Effect of geometric feature and cutting direction on variation of force and vibration in high-spee[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,95(5-8):2207-2218 王福吉.Effects of cooling position on tool wear reduction of secondary cutting edge corner of one-shot dr[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,94(9-12,SI):4277-4287 王福吉.Effects of cutting edge radius and fiber cutting angle on the cutting-induced surface damage in ma[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,91(9-12):3107-3120 贾振元.Effect of tool wear on drilling unidirectional CFRP laminates in different fiber cutting angles[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,110(1-2):89-99 Shi, Yu.Effects of inkjet printed toughener on delamination suppression in drilling of carbon fibre reinfo[J],COMPOSITE STRUCTURES,2022,245 王福吉.Evolution laws of fiber-matrix interface cracks in machining of carbon fiber reinforced polymer[J],The International Journal of Advanced Manufacturing Technology,2022,录用 贾振元.Experimental study on drilling temperature and hole quality in drilling of carbon fiber reinforced[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C JOURNAL OF ME,2022,234(13):2662-2672 王琦.Experimental Study on Tool Wear of Step Drill During Drilling Ti/CFRP Stacks[A],RECENT ADVANCES IN INTELLIGENT MANUFACTURING, PT I,2022,923:440-450 王琦.Experimental Study on Tool Wear of Step Drill during Drilling Ti/CFRP Stacks[A],IMIOT2018&ICSEE2018,2022,440-450 贾振元.Explicit Correlation Model of Multi-source Constraints for Re-design Parts with Complex Curved Sur[J],Chinese Journal of Mechanical Engineering,2022,27(2):385-391 王福吉.Heat partition in dry orthogonal cutting of unidirectional CFRP composite laminates[J],COMPOSITE STRUCTURES,2022,197:28-38 刘伟.Geometrical nonlinear deformation model and its experimental study of bimorph giant magnetostrictive[J],Dalian Ligong Daxue Xuebao/Journal of Dalian University of Technology,2022,47(1):34-38 刘巍.Geometrical nonlinear deformation model and its experimental study on bimorph giant magnetostrictive[J],Frontiers of Mechanical Engineering in China,2022,3(3):313-317 马建伟.Geometric parameters interval estimation of hydraulic valve by combining interval grey correlation a[J],International Journal of Industrial and Systems Engineering,2022,20(1):84-103 卢晓红.Hardware circuit design of copying manufacturing oriented complete software type CNC system[A],2010 International Conference on Computer Application and System Modeling, ICCASM 2010,2022,6:V6371-V6375 贾振元.Functional material driven microactuator and its key technology[J],Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering,2022,39(11):61-67 王福吉.Generation of geometric measurement collision-free path for curved part[A],4th International Conference on Information Technology for Manufacturing Systems, ITMS 2013,2022,421:427-432 王福吉.Fiber-matrix impregnation behavior during additive manufacturing of continuous carbon fiber reinforc[J],ADDITIVE MANUFACTURING,2022,37 王福吉.GENETIC ALGORITHMS WITH A NEW REPAIR OPERATOR FOR ASSEMBLY JOB SHOP SCHEDULING[J],INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING THEORY APPLICATIONS AND PRACTICE,2022,18(7):377-385 贾振元.Hybrid of simulated annealing and SVM for hydraulic valve characteristics prediction[J],EXPERT SYSTEMS WITH APPLICATIONS,2022,38(7):8030-8036 张洋.Improved separated-parameter calibration method for binocular vision measurements with a large fie[J],OPTICS EXPRESS,2022,28(3):2956-2974 Yang, Jinghao.Improved calibration method of binocular vision measurement system for large hot forging[A],25th IEEE International Symposium on Industrial Electronics (ISIE),2022,2016-November:918-922 贾振元.Improved camera calibration method based on perpendicularity compensation for binocular stereo vis[J],OPTICS EXPRESS,2022,23(12):15205-15223 王福吉.Influences of milling strategies and process parameters on the cavity defect generated during mill[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C JOURNAL OF ME,2022,235(4):723-733 王福吉.Influence of process parameters on material removal during surface milling of curved carbon fiber-re[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,116(11-12):3405-3415 白瑜光.Influence of drill helical direction on exit damage development in drilling carbon fiber reinforce[A],Global Conference on Polymer and Composite Materials (PCM),2022,213(1) 王东.Influence of Dynamic Change of Fiber Cutting Angle on Surface Damage in CFRP Milling[A],IMIOT2018&ICSEE2018,2022,428-439 马建伟.Machining error reduction by combining of feed-speed optimization and toolpath modification in hig[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C JOURNAL OF ME,2022,232(4):557-571 马建伟.Machining Parameter Optimization in High-Speed Milling for Inconel 718 Curved Surface[J],MATERIALS AND MANUFACTURING PROCESSES,2022,31(13):1692-1699 贾振元.Investigation of a measurement scheme based on IGES[J],MEASUREMENT,2022,47(1):658-668 王福吉.Investigation of Damage Reduction When Dry-Drilling Aramid Fiber-Reinforced Plastics Based on a Th[J],Materials,2022,13(23) 卢晓红.Key technologies of ASP based collaborative design[A],International Conference on Intelligent Computation Technology and Automation,2022,2:836-839 贾振元.Temperature Effects in End Milling Carbon Fiber Reinforced Polymer Composites[J],POLYMER COMPOSITES,2022,39(2):437-447 陈晨.The effect of interaction between Titanium alloy and CFRP on the interface damage in cutting Ti/CFRP[A],21st International Conference on Composite Materials, ICCM 2017,2022,2017-August 毕广健.The effect of process parameters on the machined surface quality in milling of CFRPs[A],IMIOT2018&ICSEE2018,2022,418-427 贾振元.The interaction between the cutting force and induced sub-surface damage in machining of carbon fi[J],JOURNAL OF REINFORCED PLASTICS AND COMPOSITES,2022,35(9):712-726 Gao, Yuan-yuan.Tool path planning and machining deformation compensation in high-speed milling for difficult-to-m[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,84(9-12):1757-1767 贾振元.Three-dimensional oblique cutting model for sub-surface damage analysis in CFRP/Ti stack composite[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,96(1-4):643-655 马建伟.Using support vector machine for characteristics prediction of hydraulic valve[J],INTERNATIONAL JOURNAL OF COMPUTER APPLICATIONS IN TECHNOLOGY,2022,41(3-4):287-295 卢晓红.Workshop Material Handling System Lean Planning Based on Genetic Algorithm[A],1st International Symposium on Computational Intelligence and Design,2022,1:261-264 张杨.Accurate profile measurement method for industrial stereo-vision systems[J],Sensor Review,2022,40(4):445-453 张杨.A 3D measurement method with accurate boundaries based on mutation feature detection of laser stri[J],MEASUREMENT SCIENCE TECHNOLOGY,2022,30(3) Ning, Fuda.ADDITIVE MANUFACTURING OF CFRP COMPOSITES USING FUSED DEPOSITION MODELING: EFFECTS OF PROCESS PARA[A],11th ASME International Manufacturing Science and Engineering Conference (MSEC 2016),2022,3 Wang, Gongshuo.Additive manufacturing of continuous carbon fiber reinforced thermoplastic composites: An investigat[A],ASME 2020 15th International Manufacturing Science and Engineering Conference, MSEC 2020,2022,1 Bi, Guangjian.A Dynamic Milling Forces Model Considering the 0/? Laminate Effect in Milling of Carbon Fiber Reinfo[A],Advances in Transdisciplinary Engineering,2022,9:270-276 王福吉.A mechanistic model for tensile property of continuous carbon fiber reinforced plastic composites [J],Additive Manufacturing,2022,32 贾振元.A mechanistic prediction model for thrust force and torque during drilling of CFRP/Ti stacks[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,106(7-8):3105-3115 Yang, Jinghao.A method for measuring the thermal geometric parameters of large hot rectangular forgings based on[J],MACHINE VISION AND APPLICATIONS,2022,29(3):467-476

推荐链接
down
wechat
bug