近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1]苏猛猛,张红哲,梁延德,何福本.基于Kriging代理模型的液压阀块管道结构的优化设计[J],机械工程师,2018,10:22-23,26
[2]梁延德,王瑞锋,何福本,张红哲,张晓蕾.基于工业机器人的三维扫描技术研究[J],组合机床与自动化加工技术,2018,8:57-59,67
[3]张晓蕾,梁延德,何福本,王瑞锋.基于动态路径规划的三维扫描方法设计与应用[J],组合机床与自动化加工技术,2018,3:49-51,55
[4]戴明华,张红哲,梁延德,杨春,王永青.Investigation and Practice of Elective Course for “Internet + Laser Processing Training”[A],Proceedings of the12th International Conference on Modern Industrial Training,2018,129-133
[5]He, F. B.,Liang, Y. D.,Wang, R. F.,Lin, Y. S..A Two-stage Improvement Method for Robot Based 3D Surface Scanning[A],INTERNATIONAL CONFERENCE ON ROBOTICS AND MECHANTRONICS (ICROM 2017),2018,320(1)
[6]段春争,杨春,姜开宇,徐晓慧,李喆,梁延德,张红哲.基于创新项目驱动的机械国际班工程训练课程教学模式的研究和实践[J],教育教学论坛,2017,23:148-150
[7]何福本,梁延德,张红哲,王克欣,吴涛.增强现实技术在车削加工实训教学中的应用[J],实验技术与管理,2017,34(3):127-129,150
[8]梁延德,李瑞峰,张红哲,张晓蕾.基于时间最优的PTP轨迹规划问题[J],计算机工程与设计,2017,38(1):231-237
[9]孙康宁,傅水根,梁延德.浅论大学生创业能力的可训练性[J],中国大学教学,2016,4:27-30
[10]梁延德,张红哲,王克欣.增强现实技术在车削加工实训教学中的应用[A],2016
[11]梁延德,魏剑宇,何福本,陈冬.超声波近场悬浮稳定性提高方法与实验研究[J],机械设计与制造,2015,11:46-49
[12]王克欣,张红哲,梁延德,唐勇超.工程训练中设置“3D打印技术”实训课程的研究[J],实验室科学,2015,18(4):138-140
[13]何福本,梁延德,孙捷夫,王治雄,郭超.基于包容球理论的大型桨叶去重平衡的优化研究[J],机械工程学报,2015,51(11):64-70
[14]梁延德,孙捷夫,何福本,鲁亚恒.组合式螺旋桨重心误差评价与修正[J],中国机械工程,2015,26(6):756-761
[15]Liang, Yande,Shu, Liming,Natsu, Wataru,He, Fuben.Anisotropic wetting characteristics versus roughness on machined surfaces of hydrophilic and hydrophobic materials[J],APPLIED SURFACE SCIENCE,2015,331:41-49
[16]梁延德,梅景放,何福本,周其波,魏剑宇.频率修正在超声变幅杆设计中的研究与应用[J],机械科学与技术,2015,34(2):212-215
[17]梁延德.Anisotropic wetting characteristics versus roughness on machinedsurfaces of hydrophilic and hydrophobic materials[J],Applied Surface Science,2015,331(3):41-49
[18]梁延德.Evaluation of Barycenter and Weight RemovingBalance of Large Modular Rotator[A],2015
[19]梁延德,王克欣,张红哲.Heat Dissipative Effects on Forming Quality of Filmaments in FDM Process.[A],The 38th International MATADOR Conference on Advanced Manufacturing,2015
[20]梁延德,王克欣,张红哲.Study on Frequency Correction in Ultrasonic Horn Design[A],The 38th International MATADOR Conference on Advanced Manufacturing,2015
[21]梁延德,张红哲.Study on process parameters affecting thegeometry of micro-stripe array during Nd:YAG pulsed laser beam machining on surface of Ti-6Al-4V Titanium alloy[A],2015
[22]shu Liming,梁延德,He Fuben,张红哲.Effects of Chemical Properties and Roughness on Anisotropic Wetting[J],Materials Transactions,2015,56(1):149-153
[23]梁延德,魏剑宇,何福本,陈冬. 超声波近场悬浮稳定性提高方法与实验研究[J].[J],机械设计与制造,2015,11:45-49
[24]Shu Liming,Liang Yande,He Fuben,Zhang Hongzhe.Effects of Chemical Properties and Roughness on Anisotropic Wetting Observed on Machined Surfaces[J],MATERIALS TRANSACTIONS,2015,56(1):149-153
[25]梁延德.Experimental study of contact angle hysteresison micro periodic grooved surface by laser beam machining[A],2015
[26]张红哲,梁延德,戴明华.Teaching Reform of Engineering Training to Cultivate Engineering Talents[A],Proceedings of the11th International Conference on Modern Industrial Training,2015
[27]梁延德,王松婵,吴卓平,张红哲.高等工程实践教育研究热点及变迁分析[J],中国大学教学,2014,9:86-91
[28]梁延德,舒利明,夏恒,何福本.电解制备同轴微细电极组件偏心误差的分析与修正研究[J],电加工与模具,2014,4:24-27
[29]He, Fuben,Zhang, Haohan,Bortoletto, Roberto,Liang, Yande,Pagello, Enrico.Adaptive Design and Control of a Robot-Assisted Lower Back Exoskeletal Spine System[A],13th International Conference on Intelligent Autonomous Systems (IAS),2014,302:1503-1513
[30]何福本,梁延德,孙捷夫,郭超.基于SEA的机器人仿肌弹性驱动关节研究[J],中国机械工程,2014,25(7):900-905
[31]梁延德,张红哲.高等工程实践教育研究热点及变迁可视化分析[J],中国大学教学,2014,86-91
[32]梁延德.Experimental study of effect of machining surface roughness on wetting characteristics[A],The 1st symposium for international cooperation on micro and precision electrical machining,2014,94-99
[33]梁延德,郭超,王治雄,何福本,孙捷夫.大型复杂曲面工件的重心倾测方法研究[J],组合机床与自动化加工技术,2013,12:1-3
[34]鲍永杰,高航,梁延德,朱国平.碳纤维/环氧树脂复合材料钻削温度场建模与试验[J],兵工学报,2013,34(7):846-852
[35]段春争,王殿龙,崔岩,梁延德.基于“独立制造岛”概念的柔性制造实践教学系统的建设[J],中国现代教育装备,2013,13:35-37
[36]王续跃,胡辉,梁延德,徐文骥.钛合金小孔电火花加工有限元仿真研究[J],中国机械工程,2013,24(13):1738-1742,1748
[37]陈葆娟,梁延德,何福本.熔融沉积成形试件翘曲成因的分析与优化[J],电加工与模具,2012,4:33-36
[38]He, Fuben,Liang, Yande,Zhang, Haohan,Pagello, Enrico.Modeling, Dynamics and Control of an Extended Elastic Actuator in Musculoskeletal Robot System[A],12th International Conference of Intelligent Autonomous Systems,2012,194(VOL. 2):671-+
[39]唐勇超,梁延德.翻转法测量工件重心技术研究[J],机械研究与应用,2012,2:44-46
[40]孙天夫,李哲,罗婧,梁延德.包含新型机构的仿水黾机器人设计及实现[J],机电工程,2012,29(1):38-41
[41]梁延德.Development of engineering training centers for colleges and universities in China[A],Proceeding of The 10th International Conference on Modern Industrial Training,2012,12-16
[42]张红哲,梁延德,侯文彬.Discussion On The Reform Of Engineering Training Content Curriculum[A],Proceeding of The 10th International Conference on Modern Industrial Training,2012,212-216
[43]梁延德,程敏,何福本,李航.基于互补滤波器的四旋翼飞行器姿态解算[J],传感器与微系统,2011,30(11):56-58,61
[44]胡辉,王续跃,梁延德,徐文骥.钛合金小孔电火花快速加工试验研究[J],电加工与模具,2011,5:9-13
[45]孙康宁,傅水根,梁延德,王仁卿.浅论工程实践教育中的问题、对策及通识教育属性[J],中国大学教学,2011,9:17-20
[46]王续跃,孟庆轩,徐文骥,王连吉,梁延德.角接头激光无填充焊接成形试验研究[J],电加工与模具,2011,2:37-41
[47]Wang Xu-yue,Xu Wei-xing,Xu Wen-ji,Hu Ya-feng,Liang Yan-de,Wang Lian-ji.Simulation and prediction in laser bending of silicon sheet[J],TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA,2011,21(SUPPL. 1):S188-S193
[48]何福本,梁延德,何太云.类人机器人仿真平台构建及其Matlab实现[J],机械科学与技术,2011,30(5):703-707
[49]梁延德,凌宏,张媛.超声系统辐射声场的研究[J],机械设计与制造,2010,11:194-196
[50]Yuan H.P.,Gao H.,Liang Y.D..Fabrication of a new-type electroplated wheel with controlled abrasive cluster and its application in dry grinding of CFRP[J],International Journal of Abrasive Technology,2010,3(4):299-315
[51]孟庆轩,王续跃,梁延德,徐文骥,李建丽.分流法小孔电火花加工数值模拟及实验[J],电加工与模具,2010,5:16-19,23
[52]王续跃,梁延德,徐文骥,王连吉,赵福令.小孔分流法电火花加工的分流状态研究[J],电加工与模具,2010,4:28-31
[53]梁延德.Methods for the Construction and Realization of a Humanoid Robots Simulation Platform.[J],International Journal of a Plant Engineering and Management.12,2010,2010,15(4):229-235
[54]王续跃,贾振元,梁延德,郭晓光.机械制造技术基础课程设计教学创新[J],大连理工大学学报,2010,31(z2):27-29
[55]Liang, Yande,Ling, Hong,Zhang, Yuan.Study on the conditions of near-field acoustic levitation[A],International Conference on Manufacturing Science and Engineering (ICMSE2009),2009,97-101:4135-4140
[56]Wang, Xuyue,Xu, Weniji,Wang, Lianji,Wang, Jun,Liang, Yande.Heat Absorbing Rate in Laser Drilling of YG8 Alloy[A],International Conference on Manufacturing Science and Engineering (ICMSE2009),2009,97-101:4164-+
[57]Wang, X. Y.,Li, J. L.,Liang, Y. D.,Xu, W. J.,Wang, L. J..Small Hole EDM by Current Dividing Based on Discharging Area[A],International Conference on Advances in Materials and ProcessingTechnologies (AMPT),2009,264-265:925-+
[58]周彪,王续跃,李建丽,梁延德,赵福令.小孔的等面积分流法电火花加工试验研究[J],电加工与模具,2009,3:23-26,30
[59]梁延德.Study on the Conditions of Near-Field Acoustic Levitation[A],The 2009 International Conference on Manufacturing Science and Engineering (ICMSE 2009),2009,4135-4140
[60]梁延德.Seizing Opportunities and Promoting Acceleratively the Transformation of the Engineering Training Center into High-quality Educational Resources[A],Proceeding of The 9th International Conference on Modern Industrial Training,2009,360-364
[61]梁延德,张红哲.A Discussion about the Construction of Engineering Training High—quality Curriculum[A],Proceeding of The 9th International Conference on Modern Industrial Training,2009,165-167
[62]梁延德,唐勇超,林薄,杨晶.The Depth Extend Training of the Lathe Practice Teaching Content[A],Proceeding of The 9th International Conference on Modern Industrial Training,2009,248-250
[63]唐勇超,梁延德.Innovative Experiment Teaching Based on Creative Mix Models[A],Creating Contents and Enhancing Quality of Modern Industrial Training,2009,264-266
[64]王续跃,梁延德,徐文骥,王连吉.Small hole EDM by current dividing based on discharging-area equalization[A],2009,60-60
[65]王续跃,李建丽,周彪,梁延德,赵福令.分流法小孔电火花加工与试验[J],光学精密工程,2009,17(11):2730-2737
[66]贾振元,王福吉,梁延德.机械工程创新人才培养模式的改革与实践[J],中国科教创新导刊,2009,36:132-133
[67]Li, J. M.,Liu, C.,Dai, X. D.,Chen, H. H.,Liang, Y.,Sun, H. L.,Tian, H.,Ding, X. P..PMMA microfluidic devices with three-dimensional features for blood cell filtration[J],JOURNAL OF MICROMECHANICS AND MICROENGINEERING,2008,18(9)
[68]刘兵,梁延德,杨晶,徐力.火焰矫正工艺参数的选择[J],金属热处理,2008,33(6):109-112
[69]梁延德,于华玉,何福本.全方位小型足球机器人运动特性分析[J],组合机床与自动化加工技术,2008,4:5-8
[70]刘兵,孟宪嘉,梁延德,隋进.铸态球铁角型轴承箱产生石墨漂浮的原因及C、Si含量的选择[J],中国铸造装备与技术,2008,1:34-36
[71]王续跃,徐文骥,王连吉,吴东江,梁延德.Simulation and Experiments in Laser Bending of Silicon Sheet[A],HYMAP 2008,2008
[72]梁延德,刘海龙.基于虚拟样机技术的倒立摆仿真研究[A],第四届全国智能检测与运动控制技术研讨会,2007,26-28
[73]梁延德,刘海龙.基于虚拟样机技术的倒立摆仿真研究[J],机床与液压,2007,35(7):26-28
[74]梁延德,刘大维.基于到达时间差异的超声波AGV定位[J],组合机床与自动化加工技术,2007,4:66-69
[75]梁延德,宋丽娟.弧面分度凸轮的三维建模[J],机械设计与制造,2006,8:142-143
[76]刘川,梁延德,游敏,邓莹莹.超声波塑料焊接温度测量系统[J],测试技术学报,2006,20(3):205-207
[77]梁延德,赵律.现场总线在柔性制造系统中的应用[J],组合机床与自动化加工技术,2006,4:65-67
[78]刘川,游敏,梁延德,邓莹莹.基于HP VEE的超声波塑料焊接温度场检测系统[J],工业仪表与自动化装置,2006,1:31-32,56
[79]李微波,赵律,梁延德.WinCC在基于Profibus-DP柔性制造系统中的应用[J],机械工程师,2005,12:124-126
[80]刘川,梁延德,邓莹莹.超声波塑料焊接温度场有限元数值模拟[J],机械工程材料,2005,29(11):14-16
京公网安备 11010802027423号