近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Zhang, Zhenyu,Lin, Cheng-Te,Li, Suzhi,Parkin, Ivan P.,Guo, Dongming,Du, Yuefeng,Huang, Siling,Meng, Fanning,Chen, Leilei,Xie, Wenxiang,Chang, Keke,Zhang, Chenhui,Lu, Yao.Macroscale Superlubricity Enabled by Graphene-Coated Surfaces[J],ADVANCED SCIENCE,2020,7(4):1903239
Zhang, Zhenyu,Wang, Xinze,Xie, Wenxiang,Guo, Dongming,Liao, Longxing.Development of a novel chemical mechanical polishing slurry and its polishing mechanisms on a n...[J],APPLIED SURFACE SCIENCE,2020,506
Guo, Xiaoguang,Yuan, Song,Huang, Junxin,Chen, Chong,Kang, Renke,Jin, Zhuji,Guo, Dongming.Effects of pressure and slurry on removal mechanism during the chemical mechanical polishing of...[J],APPLIED SURFACE SCIENCE,2020,505
Zhang, Yuan,Kang, Renke,Dong, Zhigang,Wang, Qing,Zhu, Xianglong,Xu, Rui,Guo, Dongming.Microstructural evolution of soft magnetic 49Fe-49Co-2V alloy induced by drilling[J],MATERIALS & DESIGN,2020,189
Yuan, Song,Jin, Zhuji,Kang, Renke,Guo, Dongming,Guo, Xiaoguang,Huang, Junxin,Lu, Menggang.Sub-nanoscale polishing of single crystal diamond(100) and the chemical behavior of nanoparticl...[J],DIAMOND AND RELATED MATERIALS,2019,100
Guo, Xiaoguang,Huang, Junxin,Yuan, Song,Chen, Chong,Jin, Zhuji,Kang, Renke,Guo, Dongming.Effect of surface hydroxylation on ultra-precision machining of quartz glass[J],APPLIED SURFACE SCIENCE,2020,501
Zhang, Shuohua,Jin, Zhuji,Kang, Renke,Guo, Dongming,Guo, Xiaoguang.Material removal characteristics of precorroded Lu2O3 laser crystals and elastic deformation mo...[J],TRIBOLOGY INTERNATIONAL,2020,143
徐振哲,金洙吉,姜冠楠,施远,郭东明.控制浅小孔电解加工深度的研究[J],现代制造工程,2019,8:68-73
Guo, Xiaoguang,Zhai, Ruifeng,Kang, Renke,Jin, Zhuji,Guo, Dongming.Study of the influence of tool rake angle in ductile machining of optical quartz glass[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,104(1-4):803-813
Liu, Ning,Sheng, Xianjun,Zhang, Chunbo,Guo, Dongming.Design of Dual-Band Composite Radome Wall With High Angular Stability Using Frequency Selective...[J],IEEE ACCESS,2019,7:123393-123401
郭民政,周平,闫英,郭东明.大面积液浮平面电极稳定性分析[J],现代机械,2019,4:16-20
Cui, Junfeng,Tang, Chun,Jiang, Nan,Parkin, Ivan P.,Guo, Dongming,Zhang, Zhenyu,Liu, Dongdong,Zhang, Danli,Hu, Wei,Zou, Li,Lu, Yao,Zhang, Chi,Lu, Huanhuan.Unprecedented Piezoresistance Coefficient in Strained Silicon Carbide[J],NANO LETTERS,2019,19(9):6569-6576
Wang, Lin,Zhou, Ping,Yan, Ying,Kang, Renke,Guo, Dongming.Physically-based modeling of pad-asperity scale chemical-mechanical synergy in chemical mechani...[J],TRIBOLOGY INTERNATIONAL,2019,138:307-315
Yan, Ying,Huang, Ning,Guo, Dongming,Wang, Yonghao,Zhou, Ping.Near-field microscopy inspection of nano scratch defects on the monocrystalline silicon surface[J],PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY,2019,56:506-512
Liu, Ziyuan,Gao, Hang,Guo, Dongming.Polishing technique for KDP crystal based on two-phase air-water fluid[J],PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY,2019,56:404-411
Wu, Dongjiang,Liu, Hanchao,Lu, Fan,Ma, Guangyi,Yan, Shuai,Niu, Fangyong,Guo, Dongming.Al2O3-YAG eutectic ceramic prepared by laser additive manufacturing with water-cooled substrate[J],CERAMICS INTERNATIONAL,2019,45(3):4119-4122
Zhang, Zhenyu,Cui, Junfeng,Zhang, Jiabo,Liu, Dongdong,Yu, Zhijian,Guo, Dongming.Environment friendly chemical mechanical polishing of copper[J],APPLIED SURFACE SCIENCE,2019,467:5-11
Wang, Ke,Yan, Ying,Zhou, Ping,Shi, Kang,Guo, Dongming.Effect of cupric ion concentration on the etching behavior of copper in Electrogenerated Chemic...[J],PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY,2019,55:70-76
刘宁,盛贤君,高祥,张春波,郭东明.Design of Dual-Band Miniaturized Frequency Selective Surface Using Branched Tortuous Structure[J],ACES JOURNAL,2019,33(1):49-55
Ou, Li -Wei,Wang, Ya-Hui,Hu, Hui-Qing,Zhang, Liang-Liang,Dong, Zhi-Gang,Kang, Ren-Ke,Guo, Dong-Ming,Shi, Kang.Photochemically combined mechanical polishing of N-type gallium nitride wafer in high efficienc...[J],PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY,2019,55:14-21
Lin, Bin,Zhou, Ping,Yan, Ying,Kang, Renke,Guo, Dongming,Wang, Ziguang.Analytical Elastic Plastic Cutting Model for Predicting Grain Depth-of-Cut in Ultrafine Grindin...[J],JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME,2018,140(12)
程诚,郭东明,姜冠楠.基于蒙乃尔合金电化学特性的电解液研究[J],现代制造工程,2018,9:108-112,153
牛方勇,吴东江,闫帅,马广义,郭东明.Al2O3/TiO2复相陶瓷结构激光近净成形研究[J],稀有金属材料与工程,2018,47(S1):388-392
Bao, Yan,Zhu, Xianglong,Kang, Renke,Dong, Zhigang,Zhang, Bi,Guo, Dongming.Optimization of support location in mirror-milling of aircraft skins[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE,2018,232(9):1569-1576
Wang, Bo,Luo, Jun,Jiang, Nan,Guo, Dongming,Zhang, Zhenyu,Chang, Keke,Cui, Junfeng,Rosenkranz, Andreas,Yu, Jinhong,Lin, Cheng-Te,Chen, Guoxin,Zang, Ketao.New Deformation-Induced Nanostructure in Silicon[J],NANO LETTERS,2018,18(7):4611-4617
Liu, Ziyuan,Gao, Hang,Guo, Dongming.A novel approach of precision polishing for KDP crystal based on the reversal growth property[J],PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY,2018,53:1-8
Yan, Ying,Guo, Xiao-Guang,Guo, Dong-Ming,Zhang, Shang-Xiong,Zhou, Ping.Effect of substrate curvature on thickness distribution of polydimethylsiloxane thin film in sp...[J],CHINESE PHYSICS B,2018,27(6)
Wang, Ziguang,Yan, Ying,Zhou, Ping,Si, Likun,Kang, Renke,Guo, Dongming.A high-efficient precision grinding for fabricating moderately thick plane mirror (MTPM)[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2018,96(5-8):2559-2566
单坤,郭东明.铜电致化学抛光机理及性能研究[J],金属加工（冷加工）,2018,5:83
Guo, Jiang,Jong, Henry Jia Hua,Kang, Renke,Guo, Dongming.Novel localized vibration-assisted magnetic abrasive polishing method using loose abrasives for...[J],OPTICS EXPRESS,2018,26(9):11608-11619
王昌瑞,康仁科,鲍岩,朱祥龙,董志刚,郭东明.飞机蒙皮镜像铣加工稳定性分析[J],航空学报,2018,39(11):204-216
Zhang, Guohui,Yan, Shuai,Niu, Fangyong,Ma, Guangyi,Wu, Dongjiang,Guo, Dongming.Microstructure and Mechanical Properties of Inconel718-NiCrAlY Composites Prepared by Laser Eng...[J],ADVANCED ENGINEERING MATERIALS,2018,20(4)
Liu, Ning,Sheng, Xianjun,Zhang, Chunbo,Fan, Jingjing,Guo, Dongming.A Design Method for Synthesizing Miniaturized FSS Using Lumped Reactive Components[J],IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY,2018,60(2):536-539
Li, Te,Wang, Yongqing,Liu, Haibo,Zhang, Jiali,Sheng, Xianjun,Guo, Dongming,Liu, Kuo.Virtual grid and BPNN based collision avoidance control of automatic fixture system[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2018,95(5-8):2843-2853
Li, Dequn,Guo, Dongming,Huang, Qingxue,Lou, Yanchun.Special issue: Near-net shaping technology[J],FRONTIERS OF MECHANICAL ENGINEERING,2018,13(1,SI):1-2
Li, Te,Liu, Kuo,Liu, Haibo,Zhang, Jiali,Sheng, Xianjun,Guo, Dongming,Wang, Yongqing.Thermal actuation performance modification of coiled artificial muscle by controlling annealing...[J],JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS,2018,56(5):383-390
Bao, Yan,Kang, Renke,Dong, Zhigang,Zhu, Xianglong,Wang, Changrui,Guo, Dongming.Model for surface topography prediction in mirror-milling of aircraft skin parts[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2018,95(5-8):2259-2268
Zhang Zhenyu,Luo Jun,Rosenkranz Andreas,Jiang Nan,Guo Dongming,Cui Junfeng,Wang Bo,Jiang Haiyue,Chen Guoxin,Yu Jinhong,Lin Chengte,Tang Chun,Hartmaier Alexander,Zhang Junjie.In situ TEM observation of rebonding on fractured silicon carbide.[J],Nanoscale,2018,10(14):6261-6269
Yan, Shuai,Ma, Guangyi,Niu, Fangyong,Kang, Renke,Guo, Dongming,Wu, Dongjiang.Nano-sized Al2O3-ZrO2 eutectic ceramic structures prepared by ultrasonic-assisted laser enginee...[J],MATERIALS LETTERS,2018,212:8-11
郭东明.一流本科重在人才培养体系创新[J],成才之路,2018,2:前插1
Zhang, Zhenyu,Shi, Zhifeng,Du, Yuefeng,Yu, Zhijian,Guo, Liangchao,Guo, Dongming.A novel approach of chemical mechanical polishing for a titanium alloy using an environment-fri...[J],APPLIED SURFACE SCIENCE,2018,427:409-415
郭东明.高性能精密制造[J],中国机械工程,2018,29(7):757-765
孙博宇,郭东明,安润莉,王宇,金洙吉,姜冠楠.无氰脉冲电镀金-铜合金工艺的研究[J],电镀与环保,2018,38(1):8-12
朱祥龙,李俊卿,董志刚,康仁科,高尚,郭东明.Design of Ultra-precision Machine for Integrated Grinding and Polishing of Silicon Wafers[A],2018
安润莉,韩晓龙,朱祥龙,金洙吉,白倩,郭东明.Effect of polishing plate properties on YAG crystal disk polishing[A],2018
郭江,朱祥龙,董志刚,郭晓光,康仁科,郭东明.6th International Conference on Nanomanufacturing[A],2018
Bao, Yan,Kang, Renke,Dong, Zhigang,Zhu, Xianglong,Wang, Changrui,Guo, Dongming.Multipoint support technology for mirror milling of aircraft skins[J],MATERIALS AND MANUFACTURING PROCESSES,2018,33(9):996-1002
鲍岩,康仁科,郭东明,王昌瑞,朱祥龙,董志刚.蒙皮镜像铣削支撑技术的研究现状和发展趋势[J],航空学报,2018,39(4):42-53
郭江,朱祥龙,董志刚,郭晓光,康仁科,郭东明.Finishing of rectangular microfeatures by localized vibration-assisted magnetic abrasive polishin...[A],2018
Liu, Ning,Sheng, Xianjun,Zhang, Chunbo,Guo, Dongming.Design of Frequency Selective Surface Structure With High Angular Stability for Radome Applicat...[J],IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS,2018,17(1):138-141
Chen, Yuchuan,Gao, Hang,Wang, Xu,Guo, Dongming,Liu, Ziyuan.Laser Induced Damage of Potassium Dihydrogen Phosphate (KDP) Optical Crystal Machined by Water Di...[J],Materials (Basel, Switzerland),2018,11(3)
郭东明.面向新时代:培养一流创新人才[J],中国高等教育,2017,24:1
Zhang, Zhenyu,Cui, Junfeng,Wang, Bo,Wang, Ziguang,Kang, Renke,Guo, Dongming.A novel approach of mechanical chemical grinding[J],JOURNAL OF ALLOYS AND COMPOUNDS,2017,726:514-524
Zhang, Zhenyu,Du, Yuefeng,Wang, Bo,Wang, Ziguang,Kang, Renke,Guo, Dongming.Nanoscale Wear Layers on Silicon Wafers Induced by Mechanical Chemical Grinding[J],TRIBOLOGY LETTERS,2017,65(4)
Yan, Shuai,Wu, Dongjiang,Ma, Guangyi,Niu, Fangyong,Kang, Renke,Guo, Dongming.Formation mechanism and process optimization of nano Al2O3-ZrO2 eutectic ceramic via laser engi...[J],CERAMICS INTERNATIONAL,2017,43(17):14742-14747
Zhu, X. P.,Du, P. C.,Meng, Y.,Lei, M. K.,Guo, D. M..Solution to Inverse Problem of Manufacturing by Surface Modification With Controllable Surface ...[J],JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME,2017,139(6)
Sun, Yuwen,Sun, Shuoxue,Xu, Jinting,Guo, Dongming.A unified method of generating tool path based on multiple vector fields for CNC machining of c...[J],COMPUTER-AIDED DESIGN,2017,91:14-26
Zhang, Zhenyu,Huang, Siling,Chen, Leilei,Wang, Bo,Wen, Bin,Zhang, Bi,Guo, Dongming.Ultrahigh hardness on a face-centered cubic metal[J],APPLIED SURFACE SCIENCE,2017,416:891-900
Wang, Bo,Lin, Chengte,Ye, Fei,Guo, Dongming,Zhang, Zhenyu,Cui, Junfeng,Jiang, Nan,Lyu, Jilei,Chen, Guoxin,Wang, Jia,Liu, Zhiduo,Yu, Jinhong.In Situ TEM Study of Interaction between Dislocations and a Single Nanotwin under Nanoindentati...[J],ACS APPLIED MATERIALS & INTERFACES,2017,9(35):29451-29456
Wang, Lin,Zhou, Ping,Yan, Ying,Zhang, Bi,Kang, Renke,Guo, Dongming.Chemical-mechanical wear of monocrystalline silicon by a single pad asperity[J],INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE,2017,120:61-71
京公网安备 11010802027423号