近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
1. Yaping Wang*, Haiyan Li, "Improved workability of the nanocomposited AgSnO2 contact material and its microstructure control during arcing process," Metall. Mater. Trans. A, 48(2), 2017: 609-616, (DOI: 10.1007/s11661-016-3859-y).
2. Zhe Wang, Yigang Tong, Yaping Wang*, "Promoting effect of silicon particles on gas-diffusion-reaction system: In-situ synthesis of AlN in Al-Si materials," J Alloy Compd. 735(25), 2018: 13-22, https://doi.org/10.1016/j.jallcom.2017.11.108
3. Xueliang Wang, Jiarong Li, Yan Zhang, Yaping Wang*, "Improvement of interfacial bonding and mechanical properties of Cu-Al2O3 composite by Cr-nanoparticle-induced interfacial modification," J Alloy Compd. 695(25), 2017: 2124-2130.
4. Yanli Chang, Ziqin Guo, Animesh Koneru, Yaping Wang*, "Surface Roughness Realized and Evaluated in Different Dimensional Range and its Effect on Field Emission Behavior," Vacuum, 136, 2017: 36-39.
5. Pengyu Chen, Wei Liu, Yaping Wang*, "Electrical contact characteristics of Ag-SnO2 materials with increased SnO2 content," J. Elect. Eng. Tech., 12(6), 2017: 2348-2352
6. Haiyan Li, Xuan Zhou, Xueqiong Lu, Yaping Wang*, "Effect of La on arc erosion behaviors and oxidation resistance of Cu alloys," Trans. Nonferrous Met. Soc. China, 27(1), 2017:102-109
7. Xueliang Wang, Junjun Li, Yaping Wang*, "Improved high temperature strength of Copper-Graphene Composite Material," Mater. Lett. 181, 2016: 309–312.
8. Yanli Chang, Zhiming Zhou, Ziqin Guo, Yaping Wang*, "Ductile Chromium in Heavily Cold-Drawn Cu75Cr25 Alloy," Metall. Mater. Trans. A 47(1), 2016: 504-509.
9. Yanli Chang, Wei Zhenga, Zhai Yuxiang Yaping Wang*, "Preparation and Performance of CuCr Contact Materials for Low Contact Pressure," Journal of Electronic Materials, 45(11), 2016: 5647-5654.
10. Bi Fu, Xuan Zhou, Yaping Wang*, "Co3O4 carbon nanofiber mats as negative electrodes for sodium-ion batteries," Mater. Lett., 170, 2016: 21-24.
11. Bi Fu, Xuan Zhou, Yaping Wang*, "High-rate performance electrospun Na0.44MnO2 nanofibers as cathode material for sodium-ion batteries," Journal of Power Sources, 310, 2016: 102-108.
12. Zhiming Zhou, Baofeng Chen, Linjiang Chai , Yaping Wang , Weijiu Huang , Minmin Cao , Bingwei Wei, " Surface Modification of Aluminized Cu-10Fe Alloy by High Current Pulsed Electron Beam," Materials Research, 2016，http://dx.doi.org/10.1590/1980-5373-mr-2016-0317.
13. Bi Fu, YaodongYang, Kun Gao and Yaping Wang, "Significant increase of TC and large piezoelectriccoefficient in Ba(Ti0.80Zr0.20)O3-0.5(Ba0.70Ca0.30)TiO3 nanofibers," Appl. Phys. Lett. 107, 042903, 2015.
14. Bi Fu, Ruie Lu, Kun Gao, Yaodong Yang and Yaping Wang, "Magnetoelectric coupling in multiferroic BaTiO3-CoFe2O4 composite nanofiber via electrospinning." Europhysics Lett.111, 2015: 17007.
15. Bi Fu, Ruie Lu, Kun Gao, Yaodong Yang and Yaping Wang, "Substrate clamping effect onto magnetoelectric coupling in multiferroic BaTiO3-CoFe2O4 core-shell nanofibers via coaxial electrospinning," Europhysics Lett. 112, 2015: 27002.
16. Bi Fu, Ruie Lu, Miao Liu, Kun Gao,Yigang Tong, Xuan Zhou, Baolin Guo, Yaodong Yang, Yaping Wang, "Variation of local piezoelectricity in multiferroic CoFe2O4-Pb(Zr0.3,Ti0.7)O3 composite nanofibers." Mater. Lett.157, 2015: 311-314.
17. Bi Fu, Yigang Tong, Xuan Zhou, Prem Vaishnava and Yaping Wang, "Fe3O4 Hollow Mesocrystal for Advanced Energy Storage." Battery Congress 2015.
18. Jun Wang, Shengnian Tie, Yaping Wang. Contact resistance characteristics of Ag-SnO2 contact materials with high SnO2 content. Journal of Alloys and Compounds. 644, 2015: 438-443.
19. Zhou Z M, Zhou T, Chai L Ja,Tu J,Wang Y P, Huang WJ, Xiao HM, Xiao ZP, "Microstructure and liquid phase separation of CuCr alloys treated by high current pulsed electron beam," Mater. Res. DOI: http://dx.doi.org/10.1590/1516-1439.323714, 2015
20. Guo Y L, Zhou Z B and Wang Y P, Preparation, electrical contact performance and arc-erosion behavior of Cu/La2NiO4 composites, 3rd International Conference on Material, Mechanical and Manufacturing Engineering (IC3ME 2015)
21. Yigang Tong, Bi Fu, Xuan Zhou and Yaping Wang, "Graphene Composite for Advanced Energy Storage." Battery Congress, 2015.
22. Chai L J, Zhou Z M, Xiao Z P, Tu J, Wang Y P, “Evolution of surface microstructure of Cu-50Cr alloy treated by high current pulsed electron beam,” Sci. China –Tech. Sci. 2015, 58(3), : 462-469
23. Zhou Z M, Xiao, H M, Huang W J, Tu J, Chen Y F, Xiao Z P， Luo T X， Wang Y P, “Surface Modification of Cucr25 Alloy with Cr Coatings Treated by High Current Pulsed Electron Beam,” AASRI Inter. Conf. on Indust. Electr. and Appl. London, ENGLAND, 2015
24. Zhou Z M, Liu J, Huang W J, Hu J J, Tang L W, Wei B W, Yang B, Wang Y P, “Microstructures of CuCr50 alloys by high current pulsed electron beam,” Inter. confer. On Auto. Mech. & Electrical Engineering, Phuket, Thailand, 2015: 520-525
25. Yaping Wang, Zhimao Yang, Bingjun Ding and Jingen Zhou, “The effect of electrode materials and additives on the breakdown strength of a vacuum gap,” IEEE Trans. on DEI, 5(2), 1998: 245-249
26. Yaping Wang and Bingjun Ding, “The preparation and the properties of microcrystalline and nanocrystalline CuCr contact materials,” IEEE Trans. on CPT, 22(3), 1999: 467-472
27. Yaping Wang and Ke Lu, “Electrical resistance measurement of crystallization kinetics of amorphous Ni80P20 alloy,” Z. Metallkd, 91(4), 2000: 285-290
28. Yaping Wang and Ke Lu, “Accurate electrical resistance measurement of the crystallization kinetics of amorphous alloys,” Science in China, Ser E 44(1), 2001: 33-41
29. Yaping Wang and Ke Lu, “Electrical resistance study of glass transition and crystallization characteristics of Zr-Al-Cu-Ni metallic glasses,” J. Mater. Sci. Tech. 18, 2002: 492-496
30. Yaping Wang, Chengyu Zhang, Hui Zhang, Bingjun Ding and Ke Lu, “Effect of the microstructure of electrode materials on arc cathode spot dynamics,” J. Phys. D: Appl. Phys. 36, 2003: 2649-2654
31. Yanli Chang, Wei Zheng, Yuxiang Zhai, Yaping Wang*, "Preparation and Performance of CuCr Contact Materials for Vacuum Switches with Low Contact Pressure," Journal of Electronic Materials, 45(11), 2016: 5647-5654
32. Xueliang Wang, Junjun Li, Yaping Wang*, "Improved high temperature strength of Copper-Graphene Composite Material," Mater. Lett. 181, 2016: 309-312
33. Yanli Chang, Zhiming Zhou, Ziqin Guo, Yaping Wang*, "Ductile Chromium in Heavily Cold-Drawn Cu75Cr25 Alloy," Metall. Mater. Trans. A 47(1), 2016: 504-509.
34. Bi Fu, Xuan Zhou, Yaping Wang*, "High-rate performance electrospun Na0.44MnO2 nanofibers as cathode material for sodium-ion batteries," Journal of Power Sources, 310, 2016: 102-108.
35. Bi Fu, Xuan Zhou, Yaping Wang*, "Co3O4 carbon nanofiber mats as negative electrodes for sodium-ion batteries," Mater. Lett., 170, 2016: 21-24.
36. Bi Fu, YaodongYang*, Kun Gao and Yaping Wang*, "Significant increase of TC and large piezoelectriccoefficient in Ba(Ti0.80Zr0.20)O3-0.5(Ba0.70Ca0.30)TiO3 nanofibers," Appl. Phys. Lett. 107, 2015: 042903
37. Bi Fu, Ruie Lu, Kun Gao, Yaodong Yang* and Yaping Wang*, "Magnetoelectric coupling in multiferroic BaTiO3-CoFe2O4 composite nanofiber via electrospinning." Europhysics Lett.111, 2015: 17007.
38. Bi Fu, Ruie Lu, Kun Gao, Yaodong Yang* and Yaping Wang*, "Substrate clamping effect onto magnetoelectric coupling in multiferroic BaTiO3-CoFe2O4 core-shell nanofibers via coaxial electrospinning," Europhysics Lett. 112, 2015: 27002.
39. Bi Fu, Ruie Lu, Miao Liu, Kun Gao,Yigang Tong, Xuan Zhou, Baolin Guo, Yaodong Yang*, Yaping Wang*, "Variation of local piezoelectricity in multiferroic CoFe2O4-Pb(Zr0.3Ti0.7)O3 composite nanofibers." Mater. Lett.157, 2015: 311-314.
40. Bi Fu, Yigang Tong, Xuan Zhou*, Prem Vaishnava and Yaping Wang*, "Fe3O4 Hollow Mesocrystal for Advanced Energy Storage." Battery Congress 2015.
41. Jun Wang, Shengnian Tie, Yaping Wang*, "Contact resistance characteristics of Ag-SnO2 contact materials with high SnO2 content," J Alloy Compd. 644, 2015: 438-443.
42. Zhou Z M, Zhou T, Chai L Ja,Tu J,Yaping Wang, Huang WJ, Xiao HM, Xiao ZP, "Microstructure and liquid phase separation of CuCr alloys treated by high current pulsed electron beam," Mater. Res. DOI: http://dx.doi.org/10.1590/1516-1439.323714, 2015
43. Yongli Guo, Zhibin Zhou and Yaping Wang*, "Preparation, electrical contact performance and arc-erosion behavior of Cu/La2NiO4 composites," 3rd International Conference on Material, Mechanical and Manufacturing Engineering (IC3ME 2015)
44. Yigang Tong, Bi Fu, Xuan Zhou* and Yaping Wang, "Graphene Composite for Advanced Energy Storage." Battery Congress 2015.
45. Chai L J, Zhou Z M*, Xiao Z P, Tu J, Yaping Wang, “Evolution of surface microstructure of Cu-50Cr alloy treated by high current pulsed electron beam,” Sci. China –Tech. Sci. 2015, 58(3), : 462-469
46. Zhou Z M*, Xiao, H M, Huang W J, Tu J, Chen Y F, Xiao Z P， Luo T X， Yaping Wang, “Surface Modification of Cucr25 Alloy with Cr Coatings Treated by High Current Pulsed Electron Beam,” AASRI Inter. Conf. on Indust. Electr. and Appl. London, ENGLAND, 2015
47. Zhou Z M*, Liu J, Huang W J, Hu J J, Tang L W, Wei B W, Yang B, Yaping Wang, “Microstructures of CuCr50 alloys by high current pulsed electron beam,” Inter. confer. On Auto. Mech. & Electrical Engineering, Phuket, Thailand, 2015: 520-525
48. Jun Wang, Xuan Zhou, Lin Lu, Dongmei Li, Pravansu Mohanty*, Yaping Wang*. "Microstructure and properties of Ag-SnO2 coatings prepared by cold spraying," Surf. Coating Technol. 236 (2013) 224-229.
49. Jun Wang, Dongmei Li, Yaping Wang*, "Microstructure and properties of Ag-SnO2 materials with high SnO2 content," J. Alloy Compd. 2014, 582: 1-5.
50. Jun Wang, Wei Liu, Yaping Wang*, "The behavior and effect of CuO in Ag-SnO2 materials," J. Alloy Compd. 2014, 588: 378-383.
51. Xuan Zhou, N Moroz, Pravansu Mohanty, Fu Bi, Yaping Wang, B C Satishkumar*, "Microstructure effects on electrochemical characteristics for plasma spray deposited LiFePO4 Films," J. Coating Sci. Technol. 2014, 1: 17-24.
52. Hui Cai, Dongde Tong, Yaping Wang*, Xiaoping Song and Bingjun Ding, “Reactive synthesis of porous Cu3Si compound,” J Alloy Compd, 2011, 509(5): 1672-1676
53. Hui Cai, Yaping Wang*, Xiaoping Song and Bingjun Ding, “Phase composition, microstructure and thermal diffusivity of Cu/Si composites sintering temperature dependence,” Adv Mater Res, 2011, 275:200-203
54. Zhiming Zhou, Jianrong Gao, Feng Li, Yaping Wang, M Kolbe, “Experimental determination and thermodynamic modeling of phase equilibria in the Cu–Cr system,” J Mater Sci, 2011, 46: 7039–7045
55. Fei Wang, Yaping Wang*, “Microstructure Evolution of a Fine Grain Al-50wt%Si alloy Fabricated by High Energy Milling,” Key Eng. Mater. 2011, 479: 54-61
56. Hui Cai, Debao Tong, Yaping Wang*, Xiaoping Song and Bingjun Ding, “Novel Cu/Si composites: A sol-gel-derived Al2O3 film as barrier to control interfacial reaction,” J. Mater. Res, 25(11), 2010: 2238-2244
57. Liu Y W, Zhang C Y, Qiao S R, Wen H, Yang Z M and Yaping Wang, Characteristics of arc erosion for Cu-C composite materials in air,” Modern Physics Letters B, 23(27), 2009: 3281-3287
58. Zhou Z M, Gao J R, Li F, Zhang Y K, Yaping Wang and Kolbe M, “On the metastable miscibility gap in liquid Cu-Cr alloys”, J．Mater. Sci. 44, 2009: 3793-3799
59. Qibin Ye and Yaping Wang*, “Redistribution of SnO2 particles in Ag/SnO2 materials during rapid solidification,” Mater. Sci. Eng. A449-451, 2007: 1045-1048.
60. Yang S C, Yaping Wang, Wang Q F, Zhang R L and Ding B J, “UV irradiation induced formation of Au nanoparticles at room temperature: The case of pH values,” Colloids Surf., A 301(1-3), 2007: 174-183
61. Yang S C, Yaping Wang, Wang Q F, Zhang R L, Yang Z M, Guo Y and Ding B J, “Growth of Gold Nanoplates: The Case of a Self-Repair Mechanism,” Cryst. Growth Des. 7(11), 2007: 2258-2261
62. Yang S C, Zhang R L, Wang Q F，Ding B J, Yaping Wang, “Coral-shaped 3D assemblies of gold nuclei induced by UV irradiation and its disintegration,” Colloids Surf., A 311(1-3), 2007: 174-179
63. Gao J, Yaping Wang, Zhou Z M and Kolbe M, “Phase separation in undercooled Cu–Cr melts,” Mater. Sci. Eng. A．449-451, 2007: 654-657
64. Zhang C Y, Yang Z M, Yaping Wang, Ding B J, Guo Y, “Preparation of CuCr25 contact materials by vacuum induction melting,” J Mater. Proc. Tech., 178, 2006 : 283-286
65. Jiang P, Li F and Yaping Wang, “Effect of different types of carbon on icrostructure and arcing behavior of Ag/C contact materials,” IEEE Trans. CPT. A 29(2), 2006: 420-423
66. Zhang C Y, Yang Z M, Yaping Wang, Ding B J, “Properties of nanocrystalline CuCr50 contact material,” Advanc. Eng. Mater., 7, 2005: 1114-1117
67. Zhou Z M, Yaping Wang，Gao J and Kolbe M, “Microstructure of rapidly solidified Cu-25 wt.% Cr alloys,” Mater. Sci. Eng. A398 (2005) 318-322
68. Luo Q F, Yaping Wang and Ding B J, “Microstructure and arc erosion characteristics of Ag/Ni contacts by mechanical alloying,” IEEE Trans. CPT. A 28, 2005: 785-788
69. Zhang C Y, Yaping Wang, Yang Z M, Guo Y and Ding B J, “Microstructure and properties of vacuum induction melted CuCr25 alloys,” J. Alloys & Compds. 366, 2004: 289-292
70. Zhang C Y, Yaping Wang, Yang Z M, Ding B J and Li Y L, “Microstructure and properties of CuCr25 alloys with different Ni content,” Acta Metallurgica Sinica, 16(2), 2003: 151-154
71. Zhuge F, Ye Z Z, Wang F Z, Yaping Wang, Zhang H, Ding B J, “Nanocomposite W-4.5%ThO2 thermionic cathode,” Mater. Lett., 57, 2003 : 2776-2779
72. Cao H, Yaping Wang, Zheng Z and Xian A P, Properties of CuCr contact materials with low chromium content and fine particles. Transactions of Nonferrous Metals Society of China.13(2003) 930-932
73. Zhang C Y, Yang Z M, Yaping Wang and Ding B J, “A worm-like trace of cathode spots on Cu-Zr-Ti amorphous ribbons,” J. Phys. D: Appl. Phys. 36(2003) 2276-2280.
74. Zhang C Y, Yang Z M, Yaping Wang and Ding B J, “Cathode spot propagation on the surface of amorphous, nanocrystalline and crystalline Cu60Zr28Ti12 cathodes, ” Phys. Lett. A, 318(2003) 435-439.
75. Ding B J, Yaping Wang, Yang Z M, Ni S L, Wang C L, Cui W and Chen J P, "The influence of electrode materials on late discharges in vacuum switching devices," IEEE Trans. on DEI, 6(6), 1999: 913-915.
76. 王亚平，王菲，细晶硅铝材料的制备及其均匀导热特性，中国科技论文在线，6（2），2011：131-36
77. 王亚平，“新型银基电接触材料”，科技开发动态，12，2004：22-23
78. 王亚平，张晖，丁秉钧，孙军，电极材料组织对真空电弧阴极斑点运动行为的影响，金属学报，12，2004：1269-73
79. 王亚平，张丽娜，丁秉钧，周敬恩，“选择性相强化对CuCr触头材料在真空小间隙中耐电压强度的影响”，中国电机工程学报，19(3)，1999：46-49
80. 王亚平，赵峰，丁秉钧，周敬恩，“纳米晶CuCr触头材料的制备及性能”，兵器材料科学与工程，21(3)，1998：9-12
81. 王亚平，李季勇，丁秉钧，周敬恩，“合金材料在真空中的电击穿行为”，高电压技术，24(2)，1998：10-12
82. 王亚平，崔建国，杨志懋，丁秉钧，周敬恩，“微晶CuCr触头材料的制备及电击穿性能的研究”，西安交通大学学报，31(3)，1997：76-80
83. 王亚平，丁秉钧，CuCr触头合金热扩散率的实验研究，高压电器，38(1)，2002：4-7
84. 徐爱斌、王亚平、丁秉钧，“新型AgSnO2 触头材料的制备和电弧侵蚀特性”，材料研究学报，17(2)，2003：156-61
85. 刘海英、王亚平、丁秉钧，“纳米Ag-SnO2 触头材料的制备与组织分析”，稀有金属材料与工程，31(2)，2002：122-24
86. 王俊勃，李英民，王亚平，丁秉钧，“纳米复合银基电触头材料的研究”，稀有金属材料与工程，33(11)，2004：1213-17
87. 王家真，王亚平，杨志懋，丁秉钧，“SnO2-CuO 纳米粉体的制备研究”，材料科学与工程学报，22(3)，2004：369-72
88. 蔡辉，王菲，王亚平，宋晓平，丁秉钧. Si粉表面溶胶-凝胶预处理制备Cu/Si复合材料. 金属学报，45(10)，2009：1261-66
89. 王菲，蔡辉，王亚平，用高能球磨法制备的细晶Al-50Si合金的组织与性能，材料研究学报，23(5)，2009：495-98
90. 郑炜，王亚平，王永胜，王慧馨，低操作功真空开关触头材料的研究进展，高压电器，46(10)，2010：69-74
91. 蔡辉，王亚平，宋晓平，丁秉钧. 铜基封装材料的研究进展. 材料导报，23(8)，2009：24-28
92. 周志明，唐丽文，夏华，彭成允，王亚平，单辊旋铸CuCr25合金的显微组织及性能，材料导报，23(24)，2009：50-52
93. 周志明，雷彬彬，刘德军，王亚平，形变与时效Cu-Cr合金的研究进展，热加工工艺，38(4)，2009：1-4
94. 张程煜，乔生儒，杨志懋，王亚平，纯石墨和铜-石墨的阴极斑点与截流值研究，稀有金属材料与工程，38(3)，2009：488-91
95. 张程煜，乔生儒，刘懿文，王亚平，杨志懋，真空电弧阴极斑点的研究进展，中国科技论文在线，4(4)，2009：296-00
京公网安备 11010802027423号