当前位置: X-MOL首页全球导师 国内导师 › 李明

个人简介

2022/12 至今,大连理工大学,运载学部工程力学系,教授 2015/12– 2022/12,大连理工大学,运载学部工程力学系,副教授 2014/08 – 2015/12,大连理工大学,运载学部工程力学系,讲师 2012/08 – 2014/08,大连理工大学,运载学部船舶工程学院,师资博士后(合作导师:黎胜 教授) 2006/09 – 2012/10,大连理工大学,运载学部工程力学系,博士(导师:亢战 教授) 2009/09 – 2011/09,Northwestern University, 土木与环境工程系,研究助理 (导师:黄永刚 教授) 2002/09 – 2006/07,郑州大学,工程力学系,学士

研究领域

结构分析与优化设计 柔性电子 薄膜屈曲褶皱分析与优化 纳米力学 双稳态作动结构分析

近期论文

查看导师新发文章 (温馨提示:请注意重名现象,建议点开原文通过作者单位确认)

[1]罗阳军.A multi-material topology optimization approach for wrinkle-free design of cable-suspended memb...[J],COMPUTATIONAL MECHANICS,2022,59(6):967-980 [2]郭迪.Design of multi-material soft pneumatic modules[J],Smart Materials and Structures,2021,30(9):95006- [3]Li, Ming,Li, Xiao,Che, LiXuan,Li, FengWei,Kang, Zhan.Non-uniform global-buckling and local-folding in thin film of stretchable electronics[J],INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2020,175 [4]Li, Ming,Li, Hao,Li, Fengwei,Kang, Zhan.Adhesion of Partially and Fully Collapsed Nanotubes[J],JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME,2019,86(1) [5]Meng, Xianhong,Zhang, Bowen,Li, Hao,Li, Fengwei,Kang, Zhan,Li, Ming,Chen, Yuli.A theoretical analysis on self-collapsing of nanotubes[J],INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES,2019,160:51-58 [6]Li, Hao,Li, Ming,Li, Fengwei,Kang, Zhan.Compression-driven collapse of nanotubes[J],NANOTECHNOLOGY,2020,31(2):025603 [7]Kang, Zhan,Wu, Chunlei,Luo, Yangjun,Li, Ming.Robust topology optimization of multi-material structures considering uncertain graded interfac...[J],COMPOSITE STRUCTURES,2019,208:395-406 [8]Li, Ming,Li, Hao,Li, Fengwei,Kang, Zhan,Meng, Xianhong.Mechanics of the folding of a nanotube[J],NANOTECHNOLOGY,2018,29(47):475602 [9]李笑,李明.折纸及其折痕设计研究综述[J],力学学报,2018,50(3):467-476 [10]李明,李浩,李丰玮,亢战.Adhesion of Partially and Fully Collapsed Nanotubes[J],Journal of Applied Mechanics,2018,86:11013- [11]Li, Hao,Li, Ming,Kang, Zhan.Mechanics of the scrolling and folding of graphene.[J],Nanotechnology,2018,29(24):245604 [12]Yu, Deqi,Zhang, Xiaojun,Yang, Jiandao,Cheng, Kai,Shu, Weilin,Lv, Kai,Li, Ming.AN OPTIMIZATION DESIGN PLATFORM FOR FIR-TREE ROOT AND GROOVE FOR STEAM TURBINE[A],2018,8 [13]Li, Ming,Niu, Yanzhuang,Wu, Huaping,Zhang, Xiaopeng,Luo, Yangjun,Kang, Zhan.Wrinkling and wrinkling-suppression in graphene membranes with frozen zone[J],THIN SOLID FILMS,2017,638:345-353 [14]Yu, Qingmin,Chen, Furong,Li, Ming,Cheng, Huanyu.Buckling analysis of stiff thin films suspended on a substrate with tripod surface relief struc...[J],APPLIED PHYSICS LETTERS,2017,111(12) [15]Luo, Yangjun,Niu, Yanzhuang,Li, Ming,Kang, Zhan.A multi-material topology optimization approach for wrinkle-free design of cable-suspended memb...[J],COMPUTATIONAL MECHANICS,2017,59(6):967-980 [16]Li, Ming,Luo, Yangjun,Wu, HuaPing,Zhu, Kai,Niu, Yanzhuang,Zhao, Tengfei,Xing, Jian,Kang, Zhan.A Prenecking Strategy Makes Stretched Membranes With Clamped Ends Wrinkle-Free[J],JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME,2017,84(6) [17]Kang, Zhan,Liu, Pai,Li, Ming.Topology optimization considering fracture mechanics behaviors at specified locations[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2017,55(5):1847-1864 [18]Luo, Yangjun,Kang, Zhan,Li, Ming.Optimal topology design for stress-isolation of soft hyperelastic composite structures under im...[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2017,55(5):1747-1758 [19]Luo, Yangjun,Xing, Jian,Niu, Yanzhuang,Li, Ming,Kang, Zhan.Wrinkle-free design of thin membrane structures using stress-based topology optimization[J],JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS,2017,102:277-293 [20]Su, Yewang,Huang, YongAn,Yu, Cunjiang,Mao, Shimin,Shim, Jaehoun,Yang, Qinglin,Lee, Pei-Yin,Armonas, Agne,Choi, Ki-Joong,Yang, Yichen,Paik, Ungyu,Ping, Xuecheng,Chang, Tammy,Dawidczyk, Thomas J.,Huang, Yonggang,Rogers, John A.,Yu, Ki Jun,Lee, Jung Woo,Fan, Jonathan A.,Wang, Shuodao,Wang, Bo,Li, Ming,Li, Rui,Harburg, Daniel V..In-Plane Deformation Mechanics for Highly Stretchable Electronics[J],ADVANCED MATERIALS,2017,29(8) [21]Yan, H.,Ni, Q.,Dai, H. L.,Wang, L.,Li, M.,Wang, Y.,Luo, Y..Dynamics and stability of an extending beam attached to an axially moving base immersed in dens...[J],JOURNAL OF SOUND AND VIBRATION,2016,383:364-383 [22]Yu, Deqi,Li, Fengwei,Yang, Jiandao,Cheng, Kai,Shu, Weilin,Lv, Kai,Li, Ming.Structural Optimization of Fir-Tree Root and Groove for Turbine Blade with Splines and Genetic ...[A],2016,8 [23]亢战,李明.Topology optimization considering fracture mechanics behaviors at specified locations[J],Structural and Multidisciplinary Optimization,2016,0(0):1-10 [24]李明,李锐.In-Plane Deformation Mechanics for Highly Stretchable Electronics[J],Advanced Materials,2016,201604989:1604989-1604989 [25]余德启,王恭义,李明.汽轮机长叶片弹塑性分析及寿命评估方法[J],计算机辅助工程,2015,24(4):43-47 [26]Li, Ming,Huang, Xiaobo,Kang, Zhan.Hydrogen adsorption and desorption with 3D silicon nanotube-network and film-network structures...[J],JOURNAL OF APPLIED PHYSICS,2015,118(8) [27]李锐,李明,苏业旺,宋吉舟,钟阳,王博,李刚.辛-叠加方法在矩形板动、静力问题及柔性电子相关问题中的应用研究[A],2015,159-159 [28]罗阳军,李明,亢战.具有无摩擦接触支撑的超弹性结构拓扑优化方法[A],2015,312-312 [29]Zhang, Xiaopeng,Kang, Zhan,Li, Ming.Topology optimization of electrode coverage of piezoelectric thin-walled structures with CGVF c...[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2014,50(5):799-814 [30]李锐,李明,苏业旺,宋吉舟,倪晓琴.可延展电子器件岛-桥结构的解析力学模型[A],2014,1-1 [31]Escabi, Monty A.,Campisi, Matthew,Kim, Yun-Soung,Avrin, Andrew E.,Van der Spiegel, Jan,Huang, Yonggang,Li, Ming,Rogers, John A.,Litt, Brian,Cohen, Yale E.,Burke, John F.,Wu, Jian,Read, Heather L.,Viventi, Jonathan,Kim, Dae-Hyeong,Higgins, Nathan C.,Storace, Douglas A.,Liu, Andrew S. K.,Gifford, Adam M..A high-density, high-channel count, multiplexed mu ECoG array for auditory-cortex recordings[J],JOURNAL OF NEUROPHYSIOLOGY,2014,112(6):1566-1583 [32]李锐,李明,苏业旺,宋吉舟,倪晓琴.柔性可延展电子器件岛-桥结构的一个解析力学模型[A],2014,1-2 [33]Meng, Xianhong,Xing, Yilin,Bai, Zhaoyu,Li, Ming.A MECHANICAL MODEL FOR SELF-ASSEMBLED GRAPHENE AROUND NANOTUBE[J],INTERNATIONAL JOURNAL OF APPLIED MECHANICS,2014,6(4) [34]Meng, Xianhong,Li, Ming,Xing, Yilin,Wang, Haijun.A PIECEWISE LINEAR MODEL FOR ANALYZING THIN FILM/SUBSTRATE STRUCTURE IN FLEXIBLE ELECTRONICS[J],ACTA MECHANICA SOLIDA SINICA,2014,27(4):420-428 [35]李锐,李明,苏业旺,宋吉舟,倪晓琴.柔性可延展电子器件岛—桥结构的一个解析力学模型[A],2014,2 [36]余德启,王恭义,李明.汽轮机长叶片弹塑性分析及寿命评估方法[A],2014,4 [37]Meng, Xian-Hong,Li, Ming,Kang, Zhan,Xiao, Jian-Liang.Folding of multi-layer graphene sheets induced by van der Waals interaction[J],ACTA MECHANICA SINICA,2014,30(3):410-417 [38]李明,亢战.Topological Design of Structures for Controlling Fracture Behaviors[A],2014 [39]Li, Ming,Kang, Zhan,Li, Rui,Meng, Xianhong,Lu, Yanjun.A molecular dynamics study on tensile strength and failure modes of carbon nanotube junctions[J],JOURNAL OF PHYSICS D-APPLIED PHYSICS,2013,46(49) [40]Meng, Xianhong,Bai, Zhaoyu,Li, Ming.ELASTODYNAMIC STRESS INTENSITY FACTOR FOR A FINITE CRACK IN ELASTIC SOLID UNDER 3D TRANSIENT LO...[J],INTERNATIONAL JOURNAL OF APPLIED MECHANICS,2013,5(4)

推荐链接
down
wechat
bug