韩啸 - 大连理工大学

个人简介

工作经历 2019.12 - 至今大连理工大学工程力学系副教授 2016.12 - 2017.12 昆士兰科技大学, 澳大利亚机械工程系访问学者 2015.01 - 2019.12 大连理工大学工程力学系讲师教育经历 2011.09 - 2014.10 大连理工大学车辆工程博士 2012.09 - 2013.09 萨里大学, 英国机械工程联合培养 2005.09 - 2009.07 大连理工大学工程力学学士

研究领域

a) 极端工况多场耦合仿真与试验方法 b) 复合材料连接结构服役性能多尺度建模 c) 胶接界面损伤演化与环境耐久性测试与建模 d) 高速飞行器热防护结构热/力学性能分析

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

韩啸, 孙亮亮, 刘博, 刘哲远, 吴承伟. 胶层厚度对胶接波纹板三点弯曲力学性能影响研究. 机械工程学报, 2023, 59(02):104-112. Hou W, Liu Z, Shi J, Han X*. On the mechanical performance and damage evolution of rivet-bonded composite T-joint under three-point bending: A combined experimental and numerical study. Thin-Walled Structures, 2023, 186:110668. 王积锐, 刘聪和, 樊俊铃, 焦婷, 巩建坡, 韩啸*. M855A1步枪弹侵彻钢靶板数值仿真. 兵工学报, 2022, 43(9):2339-2349. Yang P, Wang S, Li X, Zhang W, Han X. Study on the effect of manufacture parameters on the mechanical property of copper plate/magnetic column bonded structure using a parameter identification approach. The Journal of Adhesion, 2022, 98(15):2474-2495. Zhou G, Chen M, Wang C, Han X, Wu C, Zhang W. Machine learning method for extracting elastic modulus of cells. Biomechanics and Modeling in Mechanobiology, 2022, 21(5):1603-1612. Hou W, Li J, Sang L, Ying L, Han X*. On the mechanical performance of honeycomb-core sandwich L-joint under bending load: an experimental-numerical study. Journal of Adhesion Science and Technology, 2022, 36(10):1112-1134. Chao Y, Ma J, Chen Z, Zhang Y, Yang P, Wang S, Wang L, Han X*, Liu Y, Wu C. Modelling prediction on the degradation in mode II fracture energy of structural adhesive subjected to hygrothermal ageing. The Journal of Adhesion, 2022, 98(5):553-575. Yan CC, Ma JL, Zhang YX, Wu CW, Yang P, Wang P, Zhang W, Han X*. The fracture performance of adhesively bonded orthodontic brackets: an experimental-FE modelling study. The Journal of Adhesion, 2022, 98(2):180-206. Sun W, Yin P, Wang C, Ren Y, Han X, Wu C, Zhang W. Determination of the elastic modulus of adherent cells using spherical atomic force microscope probe. Journal of Materials Science, 2021, 56(32):18210-18218. Zhang Y, Ma J, Wu C, Han X*, Zhang W. Effects of moisture ingress on the mesoscale mechanical properties of epoxy adhesives under elevated temperature. Polymer Testing, 2021:107049. Liu Y, Carnegie C, Ascroft H, Li W, Han X, Guo H, Hughes DJ. Investigation of adhesive joining strategies for the application of a multi-material light rail vehicle. materials, 2021, 14(22). 张伟, 刘阳, 侯博文, 陈德安, 孙伟, 韩啸*. 螺距误差下的螺纹副应力分布及其对装配预紧力的影响研究. 机械工程学报, 2021, 57(17):132-148. Zheng G, Wang H, Han X, Li W. Mechanical behavior of AL/CFRP single-lap joint subjected to combined thermal and constant loading. The Journal of Adhesion, 2021, 97(4):361-379. Ying L, Gao T, Hou W, Dai M, Han X, Jiang D. On crashing behaviors of bio-inspired hybrid multi-cell Al/CFRP hierarchical tube under quasi-static loading: An experimental study. Composite Structures. 2021, 257:113103. Wu CW, Zhang W, Han X, Zhang YX, Ma GJ. A systematic review for structure optimization and clamping load design of large proton exchange membrane fuel cell stack. Journal of Power Sources, 2020, 476:228724. Akhmet G, Yu Y, Hu P, Hou W, Han X. Analysis of the performance of adhesively bonded corrugated core sandwich structures using cohesive zone method. Journal of Sandwich Structures and Materials, 2020, 22(1):104-124. Han X, Akhmet G, Hu P, Hou W, Baubekov Y, Akhmetov M. Numerical prediction on the mechanical degradation of adhesively bonded corrugated sandwich beam after hygrothermal ageing. Composite Structures, 2020, 241:112131. Han X, Akhmet G, Zhang W, Chao YX, Jin Y, Yu Y, Hu P, Ibraimov A. The effect of adhesive fillet on mechanical performance of adhesively bonded corrugated sandwich structures: an experimental–numerical study. Journal of Adhesion, 2020, 96(5):515-537. Han X, Chao Y, Yang P, Li X, Zhang W, Jin Y, Wu C. Strength prediction of adhesively bonded ferrite pillar–tin bronze plate under axial shear loading. Journal of Adhesion Science and Technology, 2020, 34(6):616-634. Han X, Jin Y, Silva LFMD, Costa M, Wu C. On the effect of adhesive thickness on mode I fracture energy - an experimental and modelling study using a trapezoidal cohesive zone model. Journal of Adhesion, 2020, 96(5):490-514. Han X, Pickering E, Bo A, Gu Y. Characterisation on the hygrothermal degradation in the mechanical property of structural adhesive: A novel meso-scale approach. Composites Part B-engineering, 2020, 182:107609. Wang C, Han X, Yang C, Zhang X, Hou W. Assumed stress quasi-conforming formulation for static and free vibration analysis of symmetric laminated plates. Engineering Computations, 2020. Zhang W, Bai X, Hou B, Sun Y, Han X. Mechanical properties of the three-dimensional compression-twist cellular structure. Journal of Reinforced Plastics and Composites, 2020, 39:260-277. Zheng G, Liu C, Han X, Li W. Effect of spew fillet on adhesively bonded single lap joints with CFRP and aluminum-alloy immersed in distilled water. International Journal of Adhesion and Adhesives, 2020, 99:102590. Liu Y, Zhou S, Han X, Yan C, Lei Z, Wang X. Analysis of the influence of a new type of buccal tube base mesh design on the adhesive layer stress distribution and bond strength. Journal of Adhesion Science and Technology, 2020, 34(18):2011-2030. 侯文彬, 刘璟琳, 陈广义, 韩啸, 徐翔, 郑文献. 胶层缺陷对胶接-拉铆搭接剪切接头力学性能影响研究. 机械工程学报, 2019, 55(24):37-44. Gao T, Ying L, Hu P, Han X, Rong H, Wu Y, Sun J. Investigation on mechanical behavior and plastic damage of AA7075 aluminum alloy by thermal small punch test: Experimental trials, numerical analysis. Journal of Manufacturing Processes, 2020, 50:1-16. Ying L, Gao T, Rong H, Han X, Hu P, Hou W. On the thermal forming limit diagram (TFLD) with GTN mesoscopic damage model for AA7075 aluminum alloy: Numerical and experimental investigation. Journal of Alloys and Compounds, 2019, 802:675-693. Wang L, Xu L, Xie Y, Du Y, Han X. A new hybrid conjugate gradient method for dynamic force reconstruction. Advances in Mechanical Engineering, 2019, 11(1):168781401882236. Han X, Hou S, Ying L, Hou W, Aliyev H. On the fracture behaviour of adhesively bonded CFRP hat-shaped thin-walled beam under axial crushing load: An experimental and modelling study. Composite Structures, 2019, 215:258-265. Han X, Chao Y, Zhang W, Chao Y, Wu C. Study on the effect of post curing on the mode II fracture energy of structural adhesive using a parameter identification approach. International Journal of Adhesion and Adhesives, 2019, 95:102398. Hu P, Akhmet G, Wu C, Han X, Chao YX, Yu Y, Orazbayeva A. Characterisation on the influence of curing history on the mechanical performance of adhesively bonded corrugated sandwich structures. Thin-walled Structures, 2019, 142:37-51. Hou W, Xu X, Han X, Wang H, Tong L. Multi-objective and multi-constraint design optimization for hat-shaped composite T-joints in automobiles. Thin-walled Structures, 2019, 143:106232.