近期论文
查看导师新发文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
[1]Zhang, Yongcun,Liu, Shutian,Kang, Shuaishuai,Ma, Guangpeng,Wang, Jiayou.Numerical and experimental study of phase-change temperature controller containing graded cellu...[J],APPLIED THERMAL ENGINEERING,2019,150:1297-1305
[2]张永存,尚士朋,刘书田.一种基于商业软件的周期性复合材料热膨胀系数性能预测新方法[A],2015,470-470
[3]张永存,崔雷,周玲丰,杨迪雄,刘书田.基于拓扑优化的机床床鞍创新构型设计[A],2010,335-342
[4]吴书豪,张永存,刘书田.一种考虑瞬态效应的散热结构导热路径设计的拓扑优化模型[J],计算力学学报,2018,35(5):547-551
[5]张永存,梁宇静,刘书田.New design of dual-constituent triangular lattice metamaterial with unbounded thermal expansion[A],2018,1(1):1-2
[6]马广朋,张永存,王佳优,刘书田,康帅帅.Numerical and experimental study of phase-change temperature controller containing graded cellula...[A],2018,1(1):1-2
[7]王佳优,马广朋,孔德奎,张永存,刘书田.Experimental and numerical study of the graded metallic honeycomb heat exchanger fabricated by ad...[A],2018,1(1):1-2
[8]李冉,张永存,刘书田.考虑加工精度的机床支承件弹性变形指标配置优化设计方法[A],2018,1(1):1-2
[9]梁宇静,张永存.具有特定热膨胀的超材料设计[A],2017,1
[10]Zhang, Yongcun,Shang, Shipeng,Liu, Shutian.A novel implementation algorithm of asymptotic homogenization for predicting the effective coef...[J],ACTA MECHANICA SINICA,2017,33(2):368-381
[11]张南,张永存,陈文炯,吴书豪,刘书田.含流道微桁架夹层面板隔热性能评估方法[J],复合材料学报,2017,34(4):850-858
[12]张永存.Experimental and Numerical Study of Metallic Honeycomb heat exchanger with the graded pore sizes[A],2017
[13]张永存.热相关的优化设计与增材制造[A],2017
[14]张永存.面向相变温控的梯度金属多孔材料导热增强设计[A],2017
[15]张永存.最大温度最小的瞬态传热结构的拓扑优化设计方法研究[A],2017
[16]Liu, Yang,Zhang, Yongcun,Liu, Shutian,Xiao, Shan,Sun, Yanpeng,Wang, Xiangming.Effect of unbonded areas around hole on the fatigue crack growth life of diffusion bonded titan...[J],ENGINEERING FRACTURE MECHANICS,2016,163:176-188
[17]Zhang Yongcun,Li Xiaobin,Liu Shutian.Enhancing buckling capacity of a rectangular plate under uniaxial compression by utilizing an a...[J],CHINESE JOURNAL OF AERONAUTICS,2016,29(4):945-951
[18]陈文炯,刘书田,张永存.基于拓扑优化的自发热体冷却用植入式导热路径设计方法[J],力学学报,2016,48(2):406-412
[19]张永存,刘书田.On the optimal design of the graded metal honeycomb heat exchanger considering the 3D temperature...[A],2016
[20]张永存,刘书田.Investigation on the influence of Localized Unbonded-areas on the Crack Growth Characteristic of ...[A],2015
[21]Zhao, Jian,Zhang, Yongcun,Gao, Renjing,Liu, Shutian.A new sensitivity improving approach for mass sensors through integrated optimization of both c...[J],SENSORS AND ACTUATORS B-CHEMICAL,2015,206:343-350
[22]Zhang, Yongcun,Xu, Yanan,Liu, Shutian.A fast numerical method for the analysis of the heat transfer performance of graded metallic ho...[J],INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,2014,79:507-517
[23]张永存,张飞,尚士朋,刘书田.考虑选材的连续体结构拓扑优化设计方法研究[A],2014,1-1
[24]Zhang, Yongcun,Hou, Yupin,Liu, Shutian.A new method of discrete optimization for cross-section selection of truss structures[J],ENGINEERING OPTIMIZATION,2014,46(8):1052-1073
[25]Zhao, Jian,Liu, Shutian,Chen, Guoxi,Gao, Renjing,Yang, Yintang,Zhang, Yongcun,Huang, Yu.Mechanical-Magnetic Coupling Analysis of a Novel Large Stroke Penta-Stable Mechanism Possessing...[J],JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME,2014,6(3)
[26]Liu, Shutian,Chen, Wenjiong,Zhang, Yongcun.Design optimization of porous fibrous material for maximizing absorption of sounds under set fr...[J],APPLIED ACOUSTICS,2014,76:319-328
[27]李潇潇,朱艳坤,张永存,刘书田.双稳态复合材料层合板跳转特性分析的解析模型[A],2014,1-1
[28]Zhang Y..New analytic model for heat transfer performance of metal foam[J],Energy Education Science and Technology Part A: Energy Science and Research,2014,32(6):8447-8458
[29]张永存,刘书田.Buckling behavior of compressive plate with negative poision’s ratio material[A],2014
[30]张永存,刘书田.Optimal design of multi-stage two-dimensional cellular-cored sandwich panel heat exchanger[J],Advanced in Mechanical Engineering,2014,428(623):1-9
[31]张永存,谷俊峰,于申,马红艳.基于虚拟项目的教学模式在理论力学中的应用研究[J],实验室科学,2013,16(5):5-8
[32]张永存,韩亚鹏,刘书田.典型火炮静刚度分析与改进设计[J],机械工程学报,2013,49(21):100-107
[33]于申,张永存,杨春秋.基于学科交叉培养本科生创新实践能力的探究[J],实验室科学,2013,16(4):1-3
[34]张永存,刘书田.梯度金属蜂窝材料换热性能分析的快速数值方法[A],2013,67-67
[35]张永存,于申,马红艳.计算机数值模拟在理论力学教学中的应用[J],实验室科学,2013,16(3):74-77,81
[36]张永存,张飞,李晓彬.基于MSC Nastran的离散变量优化算法的实现[J],计算机辅助工程,2013,22(z1):463-469
[37]张永存,刘书田.XFEM-Based Analysis for Crack Growth Characteristics of Diffusion Bonded Laminates of Titanium Al...[J],MATHEMATICAL PROBLEMS IN ENGINEERING,2013,1(1):820871-820878
[38]张永存.基于梯度的飞机翼面结构布局优化设计方法研究[A],2013
[39]张永存,刘书田.八变形零泊松比蜂窝材料的性能分析[A],2013
[40]张永存,于申,马红艳.数值模拟在理论力学教学中的应用[J],实验室科学,2013,16(3):74-77