张红伟 - 东北大学

个人简介

学习经历 1988.09-1992.07 东北工学院（现东北大学）热能工程专业工学学士 1992.09-1995.03 东北大学热能工程专业工学硕士 1995.03-2001.03 东北大学热能工程专业工学博士 2002.04-2004.07 东北大学冶金工程博士后站博士后工作经历 2001.03-2004.12 东北大学材料与冶金学院材料电磁过程研究教育部重点实验室讲师 2005.01-2014.12 东北大学材料电磁过程研究教育部重点实验室副教授 2009.01-2009.12 法国巴黎矿大（Ecole des MINES ParisTech）材料成型中心凝固过程组织与性能研究室访问学者 2015.01- 至今东北大学材料电磁过程研究教育部重点实验室教授

研究领域

1、热物理过程流动、传热、传质耦合模拟；2、合金宏观/微观偏析、碳化物析出预测与控制；3、合金相变路径热力学及动力学计算；4、合金凝固组织预测及控制

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

冯苗苗，张红伟，邵景霞，李铁，雷洪，王强. 耦合热力学凝固路径预测Fe-C包晶合金宏观偏析，金属学报，2021，57(8):1057-1072. (SCI) 张山, 张红伟, 苗淼, 冯苗苗, 雷洪, 王强. 高Cr铸铁中M7C3碳化物与奥氏体共生长的元胞自动机模拟，物理学报, 2021, 70(21)：218102. (SCI) Weixian Wang, Hongwei Zhang, Keiji Nakajima, Hong Lei, Guofeng Tang, Xinghua Wang, Wangzhong Mu and Maofa Jiang. Prediction of final solidification position in continuous casting bearing steel billets by slice moving method combined with Kobayashi approximation and considering MnS and Fe3P precipitation, ISIJ international, 2021, 61 (11)：2703-2714. (SCI) 张晛韦，张红伟，雷洪，王强. 球墨铸铁离异共晶凝固组织生长模拟, 钢铁研究学报（中文版），2020，32 (9): 816-825. Hongwei Zhang, Keiji Nakajima, Mengmeng Su, Hiroyuki Shibata, Peter Hedström, Weixian Wang, Hong Lei, Qiang Wang, Pär Göran Jönsson, Jicheng He. Prediction of Influences of Co, Ni and W Elements on Carbide Precipitation Behavior in Fe-C-V-Cr-Mo Based High Speed Steels, Steel research int. 2018, 89(10):1800172. (SCI) Hongwei Zhang, Qiang Liu, Hiroyuki Shibata, Qiang Wang, Pär Jönsson, Jicheng He, Keiji Nakajima：Partial Equilibrium Prediction of Solidification and Carbide Precipitation in Ti-added High Cr Cast Irons，ISIJ International, 2014, 54(2), 374-383. (SCI) Hongwei Zhang, Keiji Nakajima, Charles André Gandin and Jicheng He: Prediction of carbide precipitation using Partial equilibrium approximation in Fe-C-V-W-Cr-Mo high speed steels, ISIJ International, 2013, 53 (3), 493-501. (SCI) 张红伟，中岛敬治，王恩刚，赫冀成：Al-Si合金宏观偏析、凝固组织演变的元胞自动机-控制容积法耦合模拟, 中国有色金属学报, 2012, 22(7),1883-96. (EI) Qiang Liu, Hongwei Zhang, Qiang WANG, Xiangkui ZHOU, Pär JÖNSSON and Keiji NAKAJIMA. Effect of Cooling Rate and Ti Addition on the Microstructure and Mechanical Properties in As-cast Condition of Hypereutectic High Chromium Cast Irons，ISIJ International, 2012, 52 (12), 2210–2219. (SCI) Qiang Liu, Peter HEDSTRÖM, Hongwei Zhang, Qiang WANG, Pär JÖNSSON and Keiji NAKAJIMA. Effect of Heat Treatment on Microstructure and Mechanical Properties of Ti-alloyed Hypereutectic High Chromium Cast Iron, ISIJ International, 2012, 52 (12), 2288–2294. (SCI) H. Zhang, Ch.-A. Gandin, H. Ben Hamouda, D. Tourret, K. Nakajima, J. He：Prediction of solidification paths for Fe-C-Cr alloys by a multiphase segregation model coupled to thermodynamic equilibrium calculations，ISIJ International, 50 (2010): 1859-1866. (SCI) H. Zhang, K. Nakajima, H. Lei, J. He：Restrictions of physical properties on solidification microstructures of Al-based binary alloys by Cellular Automaton，ISIJ International, 50 ( 2010): 1835-1842. (SCI) K. Nakajima, H. Zhang, K. Oikawa, M. Ohno and P.G.Jonsson：Methodological progress for computer simulation of solidification and casting (Review)，ISIJ International, 50 (2010): 1724-1734. (SCI) Hongwei Zhang, Keiji Nakajima, Rangqiong Wu, Qiang Wang and Jicheng He：Prediction of solidification microstructure and columnar-to-equiaxed transition of Al-Si alloy by two-dimensional cellular automaton with “decentred square”growth algorithm，ISIJ International, 49 (2009): 1000-1009. (SCI) Hongwei Zhang, Keiji Nakajima, Wei Xing, Aili Wang and Jicheng He: Influences of flow intensity, cooling rate and nucleation density at ingot surface on deflective growth of dendrites for Al-based alloy, ISIJ International, 49 (2009): 1010-1018. (SCI) Zhang Hong-wei, Wang En-gang, He Ji-cheng, Influence of billet size on flow, solidification and solute transport in continuous casting, Journal of Iron and steel research International, 10(2003): 22-27. (SCI) 张红伟, 王恩刚, 赫冀成. 方坯连铸过程中钢液流动、凝固及溶质分布的耦合数值模拟.金属学报，38(2002): 99-104. (SCI) 张红伟, 王恩刚, 赫冀成. 高碳钢连铸坯凝固过程溶质偏析的数值模拟. 东北大学学报，23(2002): 549-552. (EI) 张红伟, 赫冀成, 王恩刚. 连铸坯截面尺寸对流动、凝固及溶质分布的影响. 东北大学学报，23(2002): 236-239. (EI) 张红伟，李宝宽，王红，赫冀成. 凝固糊状区渗透率的修正模型. 东北大学学报，19(1998), S1: 196-199 张红伟，李宝宽，王红，赫冀成. 偏流浇注对圆坯结晶器凝固过程的影响. 东北大学学报，19(1998), S1: 204-207