薛文颖 - 东北大学 - 轧制技术及连轧自动化国家重点实验室

个人简介

受教育经历 2002/09 – 2005/03: 东北大学，轧制技术及连轧自动化国家重点实验室，硕士，导师：赵宪明 1992/09 – 1996/07: 西安建筑科技大学, 材料与冶金学院，学士研究工作经历 2012/08 –至今: 东北大学, 轧制技术及连轧自动化国家重点实验室, 高级实验师 2005/03 –2012/08: 东北大学, 轧制技术及连轧自动化国家重点实验室, 实验师 1996/09 – 2002/08: 金川集团公司, 第三冶炼厂, 工程师

研究领域

组织性能测试

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

[1] Y.F. Shen*, W.Y. Xue, S.D. Li, X.H. Liu, Recovery Mn2+, Co2+, and Ni2+ from manganese nodules by acid oxidative leaching and solvent extraction. Trans. Nonferrous Met. SOC. China, 17 (2007)1105-1110. 15 [2] Y.F. Shen*, W.Y. Xue, Y.D. Wang, Y.D. Liu, L. Zuo, Tensile behaviors of IF steel with different cold-rolling reductions. Mater. Sci. Eng. A, 496 (2008) 383–388. （影响因子2.4） 11 [3] Y.F. Shen*, W.Y. Xue, W. Li, Y.L. Tang, Selective recovery of nickel and cobalt from cobalt-enriched Ni–Cu matte by two-stage counter-current leaching. Sep. Puri. Technol., 60 (2008) 113–119. （影响因子2.9） 9 [4] W. Y. Xue, M.Y. Cheng Y. X.Wang, Y.F. Shen, Research of micro hardness of a duplex stainless steel by nano indentation. 9th Proc. Inter. Conf. Technol. Plastic., (2008)1908-1913. [5] Y.F. Shen*, W.Y. Xue, W. Y. Niu, Recovery of Co(II) and Ni(II) from hydrochloric acid solution of alloy scrap. Trans. Nonferrous Met. Soc. China, 18(2008)1262-1268. 27 [6] Y.F. Shen*, W.Y. Xue, Y.D. Wang, Z.Y. Liu, L. Zuo, Mechanical properties of nano-crystalline nickel films deposited by pulse plating. Surf. Coat. Technol., 202 (2008) 5140–5145. （影响因子1.9） 40 [7] Y.F. Shen*, W.Y. Xue, Y.H. Guo, Effect of cold rolling and annealing on texture evolution and mechanical properties of IF steel sheet. Steel Res. Int., 81(2010)146-149. 2 [8] Y.F. Shen*, W.Y. Xue, Z.Y. Liu, L. Zuo, Nanoscratching deformation and fracture toughness of electroless Ni–P coatings. Surf. Coat. Technol., 205(2010)632-640. 16 [9] Y.F. Shen*, W. N. Liu, X. Sun, W.Y. Xue, Y.D. Wang, L. Zuo, and P. K. Liaw, Plastic deformation in an amorphous Ni-P coating. Metall. Mater. Trans. A, 43 (2012) 1610-1620. （影响因子1.8）7 [10] Y.F. Shen*, S.L. Chen, W.Y. Xue, Z.Y. Liu, R.X. Zhang, Y.D. Liu, Tensile properties of a Fe-20Mn-3Si-3Al-0.045C Steel at different strain rates and various temperatures. Steel Res. Int., （2012）1179-1182. [11] W.Y. Xue, Y.F. Shen*, D.F. Liu, Z.Y. Liu, Y.D. Wang. Strength and Ductility of Ultrafine Grained 304SS Prepared by Accumulative Rolling and Annealing, Characterization of Minerals, Metals, and Materials 2013. [12] X.W. Feng, J. Xie, W.Y. Xue, Y.F. Shen*, H.B. Wang, Z.Y. Liu, Microstructure and nanoindentation hardness of shot-peened ultrafine-grained low-alloy steel J. Iron Steel Res. Int., 718 (2018) 267-276.