近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
1.Jun Hu*, LinXiu Du, JianJun Wang. Effect of cooling procedure on microstructures and mechanical properties of hot rolled Nb-Ti bainitic high strength steel. Materials Science and Engineering A, 2012, 554: 79-85. (SCI)
2.Jun Hu*, LinXiu Du, JianJun Wang. Effect of V on intragranular ferrite nucleation of high Ti bearing steel. Scripta Materialia, 2013, 68: 953-956. (SCI)
3.Jun Hu*, LinXiu Du, JianJun Wang, Hui Xie, CaiRu Gao, R.D.K.Misra. Structure-mechanical property relationship in low carbon microalloyed steel plate processed using controlled rolling and two-stage continuous cooling. Materials Science and Engineering A, 2013, 585: 197-204. (SCI)
4.Jun Hu*, LinXiu Du, JianJun Wang, CaiRu Gao. Effect of welding heat input on microstructures and toughness in simulated CGHAZ of V-N high strength steel. Materials Science and Engineering A, 2013, 577: 161-168. (SCI)
5.Jun Hu*, LinXiu Du, JianJun Wang, CaiRu Gao, TongZi Yang, AnYang Wang, R.D.K. Misra. Microstructures and mechanical properties of a new as-hot-rolled high-strength DP steel subjected to different cooling schedules. Metallurgical and Materials Transactions A, 2013, 44A: 4937-4947. (SCI)
6.FuTao Dong, LinXiu Du, XiangHua Liu, Jun Hu, Fei Xue. Effect of Ti(C,N) precipitation on texture evolution and fish-scale resistance of ultra-low carbon Ti-bearing enamel steel. Journal of Iron and Steel Research, 2013, 20: 39-45. (SCI)
7.Jun Hu*, LinXiu Du, JianJun Wang, Hui Xie, CaiRu Gao, R.D.K. Misra. High toughness in the intercritically reheated coarse-grained (ICRCG) heat-affected zone (HAZ) of low carbon microalloyed steel. Materials Science and Engineering A, 2014, 590: 323-328. (SCI)
8.Jun Hu*, LinXiu Du, Hui Xie, XiuHua Gao, R.D.K. Misra. Microstructure and mechanical properties of TMCP heavy plate microalloyed steel. Materials Science and Engineering A, 2014, 607: 122-131. (SCI)
9.Jun Hu*, LinXiu Du, Hui Xie, Peng Yu, R.D.K. Misra. A nanograined/ultrafine-grained low-carbon microalloyed steel processed by warm rolling. Materials Science and Engineering A, 2014, 605: 186-191. (SCI)
10.Jun Hu*, LinXiu Du, JianJun Wang, QingYi Sun. Cooling process and mechanical properties design of hot-rolled low carbon high strength microalloyed steel for automotive wheel usage. Materials and Design, 2014, 53: 332-337. (SCI)
11.Jun Hu*, LinXiu Du, Hui Xie, FuTao Dong, R.D.K. Misra. Effect of weld peak temperature on the microstructure, hardness, and transformation kinetics of simulated heat affected zone of hot rolled ultra-low carbon high strength Ti-Mo ferritic steel. Materials and Design, 2014, 60: 302-309. (SCI)
12.LinXiu Du, ShengJie Yao, Jun Hu, HuiFang Lan, Hui Xie, GuoDong Wang. Fabrication and microstructural control of nano-structured bulk steels, a review. Acta Metallurgica Sinica (English Letters), 2014, 27(3): 508-520. (SCI)
13.Hui Xie, LinXiu Du, Jun Hu, R.D.K. Misra. Microstructure and mechanical properties of a novel 1000 MPa grade TMCP low carbon microalloyed steel with combination of high strength and excellent toughness. Materials Science and Engineering A, 2014, 612: 123-130. (SCI)
14.Jun Hu, LinXiu Du, YaNa Ma, GuoSheng Sun, Hui Xie, R.D.K. Misra. Effect of microalloying with molybdenum and boron on the microstructure and mechanical properties of ultra-low-C Ti bearing steel. Materials Science and Engineering A, 2015, 640: 259-266. (SCI)
15.Jun Hu*, LinXiu Du, H. Liu, G.S. Sun, H. Xie, H.L. Yi, R.D.K. Misra. Structure-mechanical property relationship in a low-C medium-Mn ultrahigh strength heavy plate steel with austenite-martensite submicro-laminate structure. Materials Science and Engineering A, 2015,647: 144-151. (SCI)
16.Jun Hu*, LinXiu Du, GuoSheng Sun, Hui Xie, R.D.K. Misra. Low temperature superplasticity and thermal stability of a nanostructured low-carbon microalloyed steel. Scientific Reports, 2015, 18656. (SCI)
17.Jun Hu*, LinXiu Du, GuoSheng Sun, Hui Xie, R.D.K. Misra. The determining role of reversed austenite in enhancing toughness of a novel ultra-low carbon medium manganese high strength steel. Scripta Materialia, 2015, 104: 87-90. (SCI)
18.Hui Xie, LinXiu Du, Jun Hu, GuoSheng Sun, HongYan Wu, R.D.K. Misra. Effect of thermo-mechanical cycling on the microstructure and toughness in the weld CGHAZ of a novel high strength low carbon steel. Materials Science and Engineering A, 2015, 639: 482-488. (SCI)
19.GuoSheng Sun, LinXiu Du, Jun Hu, Hui Xie, HongYan Wu, R.D.K. Misra. Ultrahigh strength nano ultrafine-grained 304 stainless steel through three-stage cold rolling and annealing treatment. Materials Characterization, 2015, 110: 228-235. (SCI)
20.Jun Hu*, LinXiu Du, M. Zang, S.J. Yin, Y.G. Wang, X.Y. Qi, X.H. Gao,R.D.K. Misra. On the determining role of acicular ferrite in V-N microalloyed steel in increasing strength-toughness combination. Materials Characterization, 2016, 118:446-453. (SCI)
21.R.D.K. Misra, J. Hu, I.V.S. Yashwanth, V.S.A. Challa, L.X. Du, G.S. Sun, Hui Xie. Phase reverted transformation-induced nanograined microalloyed steel：Low temperature superplasticity and fracture. Materials Science & Engineering A, 2016, 668: 105-111. (SCI)
22.阚志, 杜林秀, 胡军. GH4720Li合金热变形行为和相变.稀有金属材料与工程, 2016, 38(1): 46-50. (SCI)
23.GuanQiao Su, XiuHua Gao, LinXiu Du, DaZheng Zhang, Jun Hu, ZhenGuang Liu. Influence of Mn on the corrosion behaviour of medium manganese steels in a simulated seawater environment. International Journal of Electrochemical Science, 2016, 9447-9461. (SCI)
24.Hao Liu, LinXiu Du, Jun Hu*, HongYan Wu, XiuHua Gao, R.D.K. Misra. Interplay between reversed austenite and plastic deformation in a directly quenched and intercritically annealed 0.04C-5Mn low-Al steel. Journal of Alloys and Compounds, 2017, 695: 2072-2082. (SCI)
25.DaZheng Zhang, XiuHua Gao, GuanQiao Su, LinXiu Du, ZhenGuang Liu, Jun Hu. Corrosion behavior of low-C medium-Mn steel in simulated marine immersion and splash zone environment. Journal of Materials Engineering and Performance, 2017, 26: 2599-2607. (SCI)
26.GuanQiao Su, XiuHua Gao, DaZheng Zhang, ChenShuo Cui, LinXiu Du, Chi Yu, Jun Hu, ZhenGuang Liu. Offset effect of chromium on the adverse impact of manganese in a low-C medium-Mn steel with reversed austenite in the neutral salt spray condition. Corrosion Science Section, 2017, 73: 1367-1380. (SCI)
27.GuoSheng Sun, LinXiu Du, Jun Hu, Hui Xie, R.D.K. Misra. Low temperature superplastic-like deformation and fracture behavior of nano ultrafine-grained metastable austenitic stainless steel. Materials and Design, 2017, 117: 223-231. (SCI)
28.XiangYu Qi, LinXiu Du, Jun Hu, R.D.K. Misra. Enhanced impact toughness of heat affected zone in gas shield arc weld joint of low-C medium-Mn high strength steel by post-weld heat treatment. Steel Research International, 2018, 89: 1-8. (SCI)
29.XiangYu Qi, LinXiu Du, Jun Hu, R.D.K. Misra. High-cycle fatigue behavior of low-C medium-Mn high strength steel with austenite-martensite submicron-sized lath-like structure. Materials Science and Engineering A, 2018, 718: 477-482. (SCI)
30.Jun Hu*, LinXiu Du, Wei Xu, JianHan Zhai, Ying Dong, YuJie Liu, R.D.K. Misra. Ensuring combination of strength, ductility and toughness in medium-manganese steel through optimization of nano-scale metastable austenite. Materials Characterization, 2018, 136:20-28. (SCI)
31.GuoSheng Sun, LinXiu Du, Jun Hu*, R.D.K. Misra. Microstructural evolution and recrystallization behavior of cold rolled austenitic stainless steel with dual phase microstructure during isothermal annealing. Materials Science and Engineering A, 2018, 709: 254-264. (SCI)
32.GuanQiao Su, XiuHua Gao, DaZheng Zhang, LinXiu Du, Chi Yu, Jun Hu, ZhenGuang Liu. Impact of reversed austenite on the impact toughness of the high-strength steel of low carbon medium manganese. Journal of metals, 2018, 70: 672-679. (SCI)
33.Shuai Yu, LinXiu Du, Jun Hu, R.D.K. Misra. Effect of hot rolling temperature on the microstructure and mechanical properties of ultra-low carbon medium manganese steel. Materials Science and Engineering A, 2018, 731: 149-155. (SCI)
34.GuanQiao Su, XiuHua Gao, Ting Yan, DaZheng Zhang, ChenShuo Cui, LinXiu Du, ZhenGuang Liu, Yan Tang, Jun Hu. Intercritical tempering enables nanoscale austenite/ε-martensite formation in low-C medium-Mn steel: A pathway to control mechanical properties. Materials Science and Engineering A, 2018, 736: 417-430. (SCI)
35.GuoSheng Sun, Jun Hu*, Bin Zhang, LinXiu Du. The significant role of heating rate on reverse transformation and coordinated straining behavior in a cold-rolled austenitic stainless steel. Materials Science and Engineering A, 2018, 732: 350-358. (SCI)
36.Jun Hu*, LinXiu Du, Bin Zhang, XiangYu Qi, XiuHua Gao, R.D.K. Misra. Structure-property relationships in heat-affected zone of gas-shielded arc-welded V-N microalloyed steel. Journal of Iron and Steel Research International, 2018, 25: 1244–1254. (SCI)
37.XiangYu Qi, LinXiu Du, Jun Hu*, R.D.K. Misra. Effect of austenite stability on toughness, ductility, and work-hardening of medium-Mn steel. Materials Science and Technology, 2019, 35: 2134-2142. (SCI)
38.Tong Wang, Jun Hu*, LinXiu Du, GuoSheng Sun, R.D.K. Misra. Strain rate and temperature dependence of low temperature superplastic deformation in a nanostructured microalloyed steel. Materials letters, 2019, 243: 165-168. (SCI)
39.Tong Wang, Jun Hu, R.D.K. Misra. Microstructure evolution and strain behavior of a medium Mn TRIP/TWIP steel for excellent combination of strength and ductility. Materials Science and Engineering A, 2019, 753: 99-108. (SCI)
40.Jun Hu*, JiaMei Zhang, GuoSheng Sun, LinXiu Du, Yue Liu, Ying Dong, R.D.K. Misra. High strength and ductility combination in nano-/ultrafine-grained medium-Mn steel by tuning the stability of reverted austenite involving intercritical annealing. Journal of Materials Science, 2019, 54: 6565-6578. (SCI)
41.GuoSheng Sun, LinXiu Du, Jun Hu, Bin Zhang, R.D.K. Misra. On the influence of deformation mechanism during cold and warm rolling on annealing behavior of a 304 stainless steel. Materials Science and Engineering A, 2019, 746: 341-355. (SCI)
42.Jun Hu*, LinXiu Du, Ying Dong, QingWang Meng, R.D.K. Misra. Effect of Ti variation on microstructure evolution and mechanical properties of low carbon medium Mn heavy plate steel. Materials Characterization, 2019, 152: 51-35. (SCI)
43.GuoSheng Sun, LinXiu Du, Jun Hu, Bin Zhang. Significant influence of rolling modes on martensitic transformation, microstructural evolution and texture development in a 304 stainless steel. Materials Characterization, 2020, 159: 110073. (SCI)
44.Jun Hu*, KangKang Liu, Li Ma, R.Devesh Kumar Misra, WeiNa Zhang, Han Chen Du, Wei Xu. Significant improvement in strength and toughness of nanoscale precipitate-strengthened steel by direct quenching and tempering process. Steel Research International, 2020, 2000331. (SCI)
45.Jun Hu*. Low-density nanostructured bainitic steel with fast transformation rate and high impact-toughness. Materials Letters, 2020, 261: 127105. (SCI)
46.Li Ma, Tao Jia, Geng Li, Jun Hu, Jose A. Jimenez, Xiuhua Gao. Mechanical properties enhancement of a novel medium Mn-TRIP/TWIP assisted steel by dispersion of M2B-type borides particles. Materials Science and Engineering A, 2020, 784: 139333. (SCI)
47.JinLiang Wang, MingHao Huang, Jun Hu, ChenChong Wang, Wei Xu. EBSD investigation of the crystallographic features of deformation-induced martensite in stainless steel. Journal of Materials Science and Technology, 2020, 69: 148-155. (SCI)
48.王金亮, 王晨充, 黄明浩, 胡军, 徐伟. 低应变预变形对变温马氏体相变行为的影响规律及作用机制. 金属学报, 2021, 57(5): 575-585. (SCI)
49.Shan Chen, Jun Hu*, Lingyu Shan, Chenchong Wang, Xianming Zhao, Wei Xu. Characteristics of bainitic transformation and its effects on the mechanical properties in quenching and partitioning steels. Materials Science and Engineering A, 2021, 803: 140706. (SCI)
50.L.Y. Kan, Q.B. Ye, Q.H. Wang, Y. Tian, Z.D. Wang, Y.M. Wang, J. Hu. Refinement of Cu-M2C precipitates and improvement of strength and toughness by Ti microalloying in a Cu-bearing steel. Materials Science and Engineering A, 2021, 802: 140678. (SCI)
51.TianYu Zhang, Jun Hu, ChenChong Wang, Yu Wang, WeiNa Zhang, HongShuang Di, Wei Xu. Effects of deep cryogenic treatment on the microstructure and mechanical properties of an ultrahigh-strength TRIP-aided bainitic steel. Materials Characterization, 2021: 111247. (SCI)
52.XinCheng Yan, Jun Hu, Hao Yu, ChenChong Wang, Wei Xu. Unraveling the significant role of retained austenite on the dry sliding wear behavior of medium manganese steel. Wear, 2021: 203745. (SCI)
53.XiaoLu Wei, ZhiSong Chai, Qi Lu, Jun Hu, ZhongYi Liu, QingQuan Lai, JianFeng Wang, Wei Xu. Cr-alloyed novel press-hardening steel with superior combination of strength and ductility. Materials Science and Engineering: A, 2021: 141461. (SCI)
54.ZhiGang Jia, Jun Hu, Ning Xu, Chun Liu, Ling Yu Wang, ChenChong Wang, WeiHua Sun, Wei Xu. Revealing the Effect of Microstructural Inheritance in 1.5 GPa Hot-Rolled Ultrahigh Strength Q&P Steels. Metallurgical and Materials Transactions A, 2021, 52(7): 3140-51.3140-3151. (SCI)
55.Z Cai, D Zhang, L Ma, H Ding, Y Feng, J Hu, R Misra. Competing deformation mechanisms in an austenite-ferrite medium-Mn steel at different strain rates. Materials Science and Engineering: A, 2021, 818: 141357. (SCI)
56.Tong Wang, YongZheng Chen, Bin Ouyang, Xiong Zhou, Jun Hu, QiChi Le. Artificial neural network modified constitutive descriptions for hot deformation and kinetic models for dynamic recrystallization of novel AZE311 and AZX311 alloys. Materials Science and Engineering: A, 2021, 816: 141259. (SCI)
57.ZhiSong Chai, Jun Hu, ChenChong Wang, LingYu Wang, WeiHua Sun, Sybrand van der Zwaag, Wei Xu. Effect of Nb on Microstructural Evolution and Mechanical Properties of Hot-Rolled Quenching and Partitioning Steels Containing Bainite. steel research international, 2021, 92(12): 2100247. (SCI)
58.XinCheng Yan, Jun Hu*, LingYu Wang, ZhiSong Chai, WeiHua Sun, Wei Xu. The coupled effect of thermal and mechanical stabilities of austenite on the wear resistance in a 0.2C-5Mn-1.6Si steel down to cryogenic temperatures. Wear, 2021: 204116. (SCI)
59.ZhiQiang Wu, Md Nzmul Hasan, HongGang Zhou, Jun Hu, LongFei Liu, LiWei Lu, XiangHai An. Enhanced high-temperature strength of a low-density dispersion-strengthened Fe-Mn-Al-C steel. Advanced Engineering Materials, 2021: 2101192. (SCI)
60.Cheng Zhou, QiBin Ye, Jun Hu*, Tan Zhao, XiuHua Gao, ZhaoDong Wang. Ultra-high-strength multi-alloyed steel with enhanced cryogenic toughness using thermally stable retained austenite. Materials Science and Engineering: A, 2022: 142356. (SCI)
61.HuiYun Zhang, LiuWei Zheng, Tao Wang, WenJie Lv, QuanXin Shi, JinYao Ma, Yi Luo, Wei Liang, Jun Hu*, R.D.K. Misra. Interrelationship between hydrogen and α′-martensite of SUS 304 austenitic stainless steel revealed by tensile tests. Materials Science and Engineering: A, 2022, 831: 142169. (SCI)
62.Y Yang, J Hu, X Liu, W Xu, B Li, G Ling, X Pang, Y Tian. Post treatment of an additively manufactured composite consisting of 304L stainless steel and CoCrFeMnNi high-entropy alloy. Materials Science and Engineering: A, 2022, 831: 142104. (SCI)
63.QiBin Ye, Cheng Zhou, Jun Hu, XiaoLan Gong, Yong Tian, XiuHua Gao, ZhaoDong Wang. Role of nanoscale precipitates and metastable austenite in determining the strength and toughness of high-strength Nb bearing steel. Journal of Iron and Steel Research International, 2022, 29(10): 1646-1658. (SCI)
64.HuiYun Zhang, Jun Hu, XianMing Meng, Ying Sun, Tao Wang, WenJie Lv, QuanXin Shi, JinYao Ma, DiaoYu Zhou, Wei Liang, LiuWei Zheng. Effect of deformation microstructures on hydrogen embrittlement sensitivity and failure mechanism of 304 austenitic stainless steel: The significant role of rolling temperature. Journal of Materials Research and Technology, 2022. (SCI)
65.ZhiHui Cai, ShuaiJun Li, DeLiang Zhang, LiFeng Ma, Yi Feng, Jun Hu, Raja Devesh Kumar Misra. The significant influence of cooling rate and intercritical annealing temperature on austenite stability and relationship to mechanical behavior in medium manganese steel. steel research international, 2022: 2200571. (SCI)
66.TianYu Zhang, LingYu Wang, Yu Wang, Jun Hu, HongShuang Di, Wei Xu. Effect of low-temperature ausforming on bainitic transformation and mechanical properties in ultrahigh-strength bainitic steel. Journal of Iron and Steel Research International, 2022: 1-11. (SCI)
67.Jun Hu*, XuYang Li, QingWang Meng, LingYu Wang, YiZhuang Li, Wei Xu. Tailoring retained austenite and mechanical property improvement in Al-Si-V containing medium Mn steel via direct intercritical rolling. Materials Science and Engineering: A, 2022, 855: 143904. (SCI)
68.Shuo Huang, Jun Hu*, XuYang Li, JiMeng Liu, KangKang Liu, HeYong Qin, HongCai Wang. Influence of deformation degree at cold drawing on structure-properties relationship of a Fe-Ni-Cr superalloy. Journal of Alloys and Compounds, 2023: 167407. (SCI)
69.Cheng Zhou, QiBin Ye, Tan Zhao, Jun Hu*, XiuHua Gao, ZhaoDong Wang. Strengthening and toughening mechanisms in Ni-alloyed steel: Enhancing the integral stability of retained austenite. Materials Science and Engineering: A, 2022, 852: 143703. (SCI)
70.Ning Xu, LingYu Wang, Jun Hu, HongLiang Liu, Shuai Yu, Wei Xu. Batch annealing enhances the yield strength of a high quenching temperature Q&P steel through accelerated bainitic transformation. Materials Science and Engineering: A, 2022, 855: 143888. (SCI)
71.XinCheng Yan, Jun Hu, Xiao Zhang, Wei Xu. Obtaining superior low-temperature wear resistance in Q&P-processed medium Mn steel with a low initial hardness. Tribology International, 2022, 175: 107803. (SCI)
72.TianYu Zhang, LingYu Wang, Yu Wang, Jun Hu, HongShuang Di, Wei Xu. Tailoring bainitic transformation and enhancing mechanical properties of carbide-free bainitic steel via high-temperature ausforming. Materials Science and Engineering: A, 2022, 852: 143677. (SCI)
73.YuQian Wang, RuiHai Duan, Jun Hu, Z.A. Luo, ZongYi Ma, GuangMing Xie. Improvement in toughness and ductility of friction stir welded medium-Mn steel joint via post-welding annealing. Journal of Materials Processing Technology, 2022, 306: 117621. (SCI)
74.XiaoHui Xi, GuangQi Dong, LingYu Wang, Jun Hu, ChunGuang Shen, JinLiang Wang, Wei Xu. Formation mechanism of faulted bands and its effect on α′-martensitic transformation. Materials & Design, 2022, 224: 111321. (SCI)
75.ZhiSong Chai, Qi Lu, Jun Hu, LingYu Wang, Zhou Wang, JianFeng Wang, Wei Xu. Effect of retained austenite on the fracture behavior of a novel press-hardened steel. Journal of Materials Science and Technology, 2023, 135: 34-45. (SCI)
76.GuangQi Dong, JinLiang Wang, LingYu Wang, ChenChong Wang, Jun Hu, Wei Xu. Transitions in the thermal stability of pre-strained austenite-competing effects between defect density and slip band spacing. Scripta Materialia, 2023, 223: 115077. (SCI)
77.ZhiSong Chai, LingYu Wang, Zhou Wang, Qi Lu, Jun Hu, WenWen Sun, JianFeng Wang. Cr-enriched carbide induced stabilization of austenite to improve the ductility of a 1.7 GPa-press-hardened steel, Scripta Materialia 224 (2023) 115108. (SCI)
78.XinCheng Yan, Jun Hu*, Xiao Zhang, Wei Xu. Macroscopic and nanoscale investigation of the enhanced wear properties of medium-Mn steel processed via room-temperature quenching and partitioning. Wear, 2023: 204711. (SCI)
79.HengYi Zhang, LingYu Wang, Jun Hu, GuoDong Wang, Wei Xu. Optimum wear resistance achieved by balancing bulk hardness and work-hardening: A case study in austenitic stainless steels. Tribology Letters, 2023, 71(1): 7. (SCI)
80.LiuWei Zheng, HuiYun Zhang, QuanXin Shi, JinYao Ma, Wei Liang, Jun Hu. The high strength and hydrogen embrittlement resistance of selective laser melted 304 austenitic stainless steel. Materials Letters, 2023: 134013. (SCI)
81.HuiYun Zhang, LiuWei Zheng, QuanXin Shi, Wei Liang, Jun Hu*. Anisotropy in mechanical property and hydrogen embrittlement resistance of selective laser melted 304 austenitic stainless steel. Materials Letters, 2023: 134104. (SCI)
82.ZhongKai Li, YuJie Liu, YanFei Wang, Jun Hu, Lei Xu, JianJun Wang, ChunMing Liu, YunTian Zhu. Hierarchical strain band formation and mechanical behavior of a heterostructured dual-phase material. Journal of Materials Science and Technology, 2023. (SCI)
京公网安备 11010802027423号