近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
1. Zhang Xiaoming，Jiang Zhengyi，Liu Xianghua，Wang Guodong. Analysis of slab edging by a 3-D rigid visco-plastic finite element method. Chinese Journal of mechanical engineering ,2002,15(1):48~52
2. Zhang, X.M., Jiang, Z. Y., Tieu, A.K., Liu, X.H. and Wang, G.D. Numerical modeling of the thermo deformation of the CVC roll for hot strip mills. Journal of Materials Processing Technology, 2002，130-131：219-223.
3. X M Zhang, Z Y Jiang, X H Liu, G D Wang. Modelling of the micro-segregation of twin-roll thin strip casting. Journal of Materials Processing Technology .2005, 162-163,591-595.
4. Xiaoming ZHANG, Zhenyi JIANG, Xianghua LIU and Guodong WANG.Simulation of the Fluid Flow, Heat Transfer and Micro-segregation in Twin-roll Strip Casting of Stainless Steel.Journal of MATERIALS SCIENCE and TECHNOLOGY, 2006，22(3): 295～300
5. X.M. Zhang, Z.Y. Jiang, L.M. Yang, X.H. Liu and G.D.Wang. Modelling of coupling flow and temperature fields in molten pool during twin-roll strip casting process. Journal of Materials Processing Technology, 2007, 187-188, 339-343.
6.Xiaoming Zhang, Zhengyi Jiang, Dongbin Wei, Xianghua Liu, Guodong Wang.Analysis of Casting Roll during Twin-Roll Thin Strip Casting. Steel research int.2010, 81(9):138-141.
7. Xiaoming Zhang, Zhengyi Jiang, Dongbin Wei, Xianghua Liu and Guodong Wang. Finite Element Modeling of Casting Roll during Twin-Roll Strip Casing [J].Advanced Materials Research, 2011,145:287-292.
8. Liang Bo, Wang Guodong, Zhang Baoyan, Zhang Xiaoming, Corrosion resistance of Al-Cu-Fe alloy powder coated with silica using an ultrasound-assisted sol-gel method, Corrosion science, 2013, 73, 292-299.
9. Bo Liang, Baoyan Zhang, Guodong Wang, Di Li, Xiaoming Zhang, Application of ultrasound irradiation on sol-gel technique for corrosion protection of Al65Cu20Fe15 alloy powder, Applied Surface Science, 2013, 285, 249-257.
10. Zhang Ting, Zhang Xiaoming, Wang Yuqian, Li Chenggang, Lan Liangyun, AlN Precipitates and Microstructure in Non-oriented Electrical Steels Produced by Twin-roll Casting Process, Acta Metallurgica Sinica-english Letters, 2013,26(4), 483-488.
11. Hejie Li, Zhengyi Jiang,Dongbin Wei,Xiaoming Zhang, Micro texture based analysis of surface asperity flattening behavior of annealed aluminum alloy in uniaxial planar compression. Tribology International, 2013, 66, 282-288.
12. X.J. Gao; Z.Y. Jiang; D.B. Wei; H.J. Li; S.H. Jiao;J. Xu; X.M. Zhang; J.T. Han; D.F Chen. Constitutive analysis for hot deformation behavior of novel bimetal consisting of pearlitic steel and low carbon steel. Materials Science and Engineering A, 2014,595, 1-9.
13. Xingjian Gao,Zhengyi Jiang,Dongbin Wei,Sihai Jiao,Dengfu Chen,Jianzhong Xu,Xiaoming Zhang,Dianyao Gong.Effects of temperature and strain rate on microstructure and mechanical properties of high chromium cast iron/low carbon steel bimetal prepared by hot diffusion-compression bonding. Materials and Design, 2014,63,650-657.
14. Guoqing Zu, Xiaoming Zhang, Jingwei Zhao, Yi Cui, Yuqian Wang, Zhengyi Jiang, Analysis of the microstructure, texture and magnetic properties of strip casting 4.5wt.% Si non-oriented electrical steel. Materials & Design. 2015, 85, 455-460.
15. Li, H.J., Jiang, Z.Y., Wei, D.B., Xu, J., Zhang, X., Gong, D. and Han, J. Study on surface asperity flattening in cold quasi-static uniaxial planar compression by crystal plasticity finite element method. Tribology Letters, 2015, 58(3), 1-10.
16. B. Liang, G. D. Wang, B. Y. Zhang and X. M. Zhang. Optimization of sol–gel coating on the surface of aluminum alloy powder for corrosion protection in the condition of ultrasonic radiation [J], materials and corrosion, 2015, 66(3),241-250.
17. Boostania, A.F., Yazdanib, S., Mousavianb, R.T., Tahamtanc, S., Khosroshahib, R.A., Wei, D.B., Brabazone, D., Xu, J., Zhang, X.M. and Jiang, Z.Y. Strengthening mechanisms of graphene sheets in aluminium matrix nanocomposites. Materials and Design , 2015, 88, 983-989.
18. Boostania, A.F., Mousavianb, R.T., Tahamtanc, S., Yazdanib, S., Khosroshahib, R.A., Wei, D.B., Xu, J., Zhang, X.M. and Jiang, Z.Y. Solvo thermal-assisted graphene encapsulation of SiC nanoparticles: A new horizon toward toughening aluminium matrix nanocomposites. Materials Science and Engineering A, 2016, 653, 99-107.
19. Guoqing Zu, XiaomingZhang, JingweiZhao, YuqianWang, YiCui, YiYan, Zhengyi Jiang .Analysis of {411}<148> recrystallization texture in twin-roll strip casting of 4.5wt%Si non-oriented electrical steel. Materials Letters, 2016,180 ,63–67.
20. Guoqing Zu, Xiaoming Zhang, Jingwei Zhao, Yuqian Wang, Yi Yan, Chengang Li,Guangming Cao, Zhengyi Jiang. Fabrication and properties of strip casting 4.5 wt% Si steel thin sheet. Journal of Magnetism and Magnetic Materials, 2017,424,64–68.
21. Wang, Yu-Qian ; Zhang, Xiao-Ming ; He, Zhen ; Zu, Guo-Qing ; Ji, Guang-Fa ; Duan, Jun-Yang ; Misra, R.D.K. Effect of copper precipitates on mechanical and magnetic properties of Cu-bearing non-oriented electrical steel processed by twin-roll strip casting Materials Science & Engineering A, 2017, 703, 340-347.
22. Wenzhen Xia , Jingwei Zhao , Hui Wu , Sihai Jiao , Xianming Zhao , Xiaoming Zhang , Jianzhong Xu , Zhengyi Jiang. Analysis of oil-in-water based nanolubricants with varying mass fractions of oil and TiO2 nanoparticles. Wear, 2018, 396-397, 162–171.
京公网安备 11010802027423号