近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
(1) A Comparison of Hot Deformation Behavior of High-Cr White Cast Iron and High-Cr White Cast Iron/Low Carbon Steel Laminate[J],Stell reseach, 86(2015) N0 9999 pp1-9. SCI.
(2) Effect of carbide orientation on sliding wear behaviour of high hromium cast iron Advanced Materials Reseach Vo1. 806 (2015) pp 567-572 SCI
(3) Enhanced tensile properties of aluminium matrix composites reinforced with graphene encapsulated SiC nanoparticles Composites: Part A 68 (2015) 155-163 SCI
(4) Graphene sheets encapsulating SiC nanopar enhancing tensile ductility of metal matrix ticles:A roadmap towards composites Materials Science&Engineering A 648 (2015) 92-103 SCI
(5) Strengthening mechanisms of graphene sheets in aluminium matrix nanocomposites Materials and Design 88 (2015) 983-989 SCI
(6) Surface asperity evolution and microstructure analysis of Al 6061T5 alloy in a quasi-static cold uniaxial planar compression(CUPC) Applied Surface Scieuce 347 (2015) 193-201 SCI
(7) Theory and experimental research on the process of rolling shape slab，J.MPT, v 121, n 2-3, Feb 28, 2002, p 182-188
(8) Model Buiding of Backup Roller Diameter Effct Rate in 4-High Mill，J.MST Vol.20, No.4, 2004, p1-3
(9) A Method to Analyse of Roll Bending Force Effect Rate in 4-high Hot Strip Mill，Key Engineering Materials
(10) 异型扁坯轧制过程的刚塑性有限元分析，机械工程学报, v 36, n 9, Sep, 2000, p 11-15
(11) 入口楔形对中厚板侧弯影响规律，东北大学学报（自然科学版），2012，33（12）：1731 ~ 1733
(12) 单位宽度轧制力对热轧带钢凸度的影响规律，东北大学学报（自然科学版），2003，24（3）：280 ~ 283
(13) 大凸度支撑辊带钢凸度的控制能力，东北大学学报（自然科学版），2003，24（2）：151 ~ 154
(14) 工作辊弯辊力对热轧带钢凸度的影响，钢铁研究学报，2003，15（5）：23 ~ 27
(15) 四轧辊机轧辊弹性变形解析模块的开发，轧钢，2003，20（2）：8 ~ 11
(16) 轧辊直径对热轧带钢凸度的影响规律，东北大学学报（自然科学版），2002，23（12）：1170 ~ 1173
(17) Effects of temperature and strain rate on microstructure and mechanical properties of high chromium cast iron/low carbon steel bimetal prepared by hot diffusion-compression bonding, Materials and Design, 2014, 63: 650-657
(18) 热带终轧温度计算的逐步回归分析模型，东北大学学报（自然科学版），2007，28（4）：522 ~524+528
(19) A Fadavi Boostani#, R Taherzadeh Mousavian, S Tahamtan, S Yazdani, R Azari Khosroshahi, Dongbin Wei, Jianzhong Xu, Xiaoming Zhang, Zhengyi Jiang*, Solvothermal-assisted Graphene Encapsulation of SiC Nanoparticles: A New Horizon toward Toughening Aluminium Matrix Nanocomposites, Materials Science and Engineering A, 2016, A653: 99-107
(20) A Fadavi Boostani#, S Tahamtan, Zhengyi Jiang*, Dongbin Wei, S Yazdani, R Azari Khosroshahi, R Taherzadeh Mousavian, Jianzhong Xu, Xiaoming Zhang, Dianyao Gong, Enhanced Tensile Properties of Aluminium Matrix Composites Reinforced with Graphene Encapsulated SiC Nanoparticles, Composites part A-Applied Science and Manufacturing, 2015, 68: 155-163
(21) A Fadavi Boostani#, R Taherzadeh Mousavian, S Tahamtan, S Yazdani, R Azari Khosroshahi, Dongbin Wei, Jianzhong Xu, Dianyao Gong, Xiaoming Zhang, Zhengyi Jiang*, Graphene Sheets Encapsulating SiC Nanoparticles: A Roadmap towards Enhancing Tensile Ductility of Metal Matrix Composites, Materials Science and Engineering A, 2015, A648: 92-103
(22) A Fadavi Boostani#, S Yazdani, R Taherzadeh Mousavian, S Tahamtan, R Azari Khosroshahi, Dongbin Wei, D Brabazon, Jianzhong Xu, Xiaoming Zhang, Zhengyi Jiang*, Strengthening Mechanisms of Graphene Sheets in Aluminium Matrix Nanocomposites, Materials and Design, 2015, 88: 983-989
(23) Hejie Li#,*, Zhengyi Jiang, Dongbin Wei, Xingjian Gao*, Jianzhong Xu, Xiaoming Zhang, Surface Asperity Evolution and Microstructure Analysis of Al6061T5 Alloy in a Quasi-static Cold Uniaxial Planar Compression (CUPC), Applied Surface Science, 2015, 347: 193-201
(24) Hejie Li#,*, Zhengyi Jiang, Dongbin Wei, Jianzhong Xu, Xiaoming Zhang, Dianyao Gong, Jiangtao Han, Study on Surface Asperity Flattening in Cold Quasi-static Uniaxial Planar Compression by Crystal Plasticity Finite Element Method, Tribology Letters, 2015, 58(3): 46-55
(25) Zhengyi Jiang#, Xingjian Gao*, Shengli Li, Hongmei Zhang, Dengfu Chen, Jianzhong Xu, Interface Analysis and Hot Deformation Behavior of a Novel Laminated Composite with High-Cr Cast Iron and Low Carbon Steel Prepared by Hot Compression Bonding, Journal of Iron and Steel Research, International, 2015, 22(5): 438-445
(26) Xingjian Gao#, Zhengyi Jiang*, Dongbin Wei, Hejie Li, Sihai Jiao, Jianzhong Xu, Xiaoming Zhang, Jiangtao Han, Dafu Chen, Constitutive Analysis for Hot Deformation Behavior of Novel Bimetal Consisting of Pearlitic Steel and Low Carbon Steel, Materials Science and Engineering A, 2015, A648: 92-103
(27) Kezhi Linghu#, Zhengyi Jiang*, Jingwei Zhao, Fei Li, Dongbin Wei, Jianzhong Xu, Xiaoming Zhang, Xiaoming Zhao, 3D FEM analysis of strip shape during multi-pass rolling in a 6-high CVC cold rolling mill, International Journal of Advanced Manufacturing Technology, 2014, 74: 1733-1745
(28) Haijun Li#,*, Jianzhong Xu, Guodong Wang, Lijun Shi, Yong Xiao, Development of Strip Flatness and Crown Control Model for Hot Strip Mills, Journal of Iron and Steel Research, International, 2010, 17(3): 21-27
(29) Yu Hu#, Dianyao Gong*, Zhengyi Jiang, Jianzhong Xu, Dianhua Zhang, Xianghua Liu, Effect of Initial Crown on Shape of Hot Rolled Strip, Journal of Iron and Steel Research, International, 2009, 16(5): 32-34
(30) 赵旭亮，龚殿尧*，徐建忠，张殿华，热带轧机支撑辊辊型曲线的影响因素，东北大学学报（自然科学版），2009，30（5）：677 ~680
(31) 李海军*，徐建忠，王国栋，热轧带钢精轧过程高精度轧制力预测模型，东北大学学报（自然科学版），2009，30（5）：669 ~672
(32) 胡宇，龚殿尧*，徐建忠，刘相华，四辊轧机热轧带钢板形的急停测量实验研究，东北大学学报（自然科学版），2009，30（4）：547 ~550
(33) 李海军*，时立军，徐建忠，王国栋，带钢热连轧机组温度模型及其自学习方法，东北大学学报（自然科学版），2009，30（3）：369 ~372
(34) 赵旭亮*，张殿华，徐建忠，刘相华，热带轧机工作辊初始辊型曲线的设计，东北大学学报（自然科学版），2008，29（11）：1585 ~1588
(35) 赵旭亮*，王淑君，徐建忠，张殿华，四辊轧机轧辊弹性变形的研究，东北大学学报（自然科学版），2008，29（6）：834 ~837
(36) 郭忠峰*，徐建忠，李长生，刘相华，几类典型轧辊横移变凸度辊型的比较与分析，东北大学学报（自然科学版），2008，29（6）：830 ~833
(37) 郭忠峰*，徐建忠，刘相华，1700热连轧机轧辊温度场及热凸度研究，东北大学学报（自然科学版），2008，29（4）：517 ~520
(38) 郭忠峰*，徐建忠，刘相华，1700热连轧机轧辊磨损模型研究，东北大学学报（自然科学版），2007，28（10）：1378 ~1380
(39) Zhongfeng Guo#,*, Jianzhong Xu, Changsheng Liu, Xianghua Liu, Shape Setup System for 1700 Hot Strip Mill, Journal of Iron and Steel Research, International, 2007, 14(5): 27-30
(40) Dianyao Gong#,*, Jianzhong Xu, Lianggui Peng, Guodong Wang, Xianghua Liu, Journal of Iron and Steel Research, International, 2007, 14(4): 11-14
(41) Haijun Li#,*, Jianzhong Xu, Guodong Wang, Xianghua Liu, Improvement on Conventional Load Distribution Algorithm in Hot Tandem Mills, Journal of Iron and Steel Research, International, 2007, 14(2): 36-41
(42) Jianzhong Xu#,*, Dianyang Gong, Zhengyi Jiang, Xianghua Liu, Guodong Wang, Mechanics of Design and Model Development of CVC-plus Roll Curve, Advanced Materials Research, 2012, 418-420: 1158-1166, 2nd International Conference on Advances in Materials and Manufacturing, Guilin, P.R. China, 2011.12.16-12.18
(43) Dianyao Gong, Jianzhong Xu*, Zhengyi Jiang, Xiaoming Zhang, Xianghua Liu, Guodong Wang, Effects of Asymmetrical Stand Stiffness on Hot Rolled Strip Shape , International Journal of Modern Physics B, 2008, 22(31-32): 5734-5739, 9th Asia-Pacific Symposium on Engineering Plasticity and Its Applications, Daejeon, South Korea, 2008.10.20-10.24
(44) Zhengyi Jiang, Xingjian Gao*, Dongbin Wei, Shengli Li, Hongmei Zhang, Jianzhong Xu, Di Wu, Sihai Jiao, Effect of carbide orientation on sliding wear behavior of high chromium cast iron, Advanced Materials Research, 2015, 806: 567-572, 17th International Symposium on Advances in Abrasive Technology, Hawaii, United States of America, 2014.9.22-9.25
(45) Jiang Zonglin, Experiments and Development of Long-test-duration Hypervelocity Detonation-driven Shock Tunnel , 2014 AIAA Science and Technology Forum and Exposition, National Harbor, Maryland , 13 - 17 January 2014
京公网安备 11010802027423号